Download or read book Estimated Viscosities and Thermal Conductivities of Gases at High Temperatures written by Roger A. Svehla and published by . This book was released on 1963 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscosities and thermal conductivities, suitable for heat-transfer calculations, were estimated for about 200 gases in the ground state from 100° to 5000° K and 1-atm pressure. Free radicals were included, but excited states and ions were not. Calculations for the transport coefficients were based upon the Lennard-Jones (12-6) potential for all gases. Intermolecular force constants for this potential were obtained from experimental viscosity data or were estimated when data were not available. The same set of constants was used to calculate both viscosity and conductivity. An Eucken-type correction for exchange between internal and translational energies was made for thermal conductivities of polyatomic gases.
Download or read book Estimated Viscosities and Thermal Conductivities of Gases at High Temperatures written by Roger A. Svehla and published by . This book was released on 1962 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Estimated Viscosities and Thermal Conductivities of Gases at High Temperatures with List of References written by and published by . This book was released on 1963 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Viscosity and Thermal Conductivity Coefficients of Dilute Nitrogen and Oxygen written by Gregg E. Childs and published by . This book was released on 1966 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermal Conductivity and Viscosity of Gas Mixtures written by Henry Cheung and published by . This book was released on 1958 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Approximate Formulas for Viscosity and Thermal Conductivity of Gas Mixtures written by Richard S. Brokaw and published by . This book was released on 1964 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Collection of Heat transfer Properties of Gases at Moderate Pressures and Rules for Rapid Estimation of Missing Data written by Franz Josef Neugebauer and published by . This book was released on 1962 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plots of property data of 380 gases and of 84 elements and compounds considered as gases display correlations which allow convenient estimation of missing data. Constants needed for the estimation of properties of gas mixtures correlate in the same fashion. It appears to be possible to rapidly estimate specific heat, viscosity, and thermal conductivity of gases and constants needed for the prediciton of mixture properties if only the empirical chemical formulas of the gases are known. The method allows a broad survey over the entire field of available gases. (Author).
Download or read book The Viscosity and Thermal Conductivity Coefficients of Dilute Argon Between 100 and 2000 K written by Howard J. M. Hanley and published by . This book was released on 1966 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prandtl Number Thermal Conductivity and Viscosity of Air helium Mixtures written by Ernst Rudolf Georg Eckert and published by . This book was released on 1960 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Cryogenic Engineering written by K. Timmerhaus and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First International Cryogenic Materials Conference (ICMC) provided a new forum for the presentation of low-temperature materials research. The confer ence, held in conjunction with the 1975 Cryogenic Engineering Conference, provided materials research personnel with excellent exposure to current develop ments in the cryogenics field and beneficial interactions with designers of cryogenic systems. Because of the large response to a late call for papers, the enthusiasm and encouragement at the meeting, and the wide spectrum and high quality of papers, the Second International Cryogenic Materials Conference is being planned along with the 1977 Cryogenic Engineering Conference for Boulder, Colorado, in the summer of 1977. The success of the First International Cryogenic Materials Conference was certainly in large measure due to the excellent hospitality of our Canadian hosts, the Royal Military College of Canada and Queen's University in Kingston, Ontario. In particular, the efforts of A. C. Leonard and his staff ensured an excellent conference and a pleasant and memorable visit to Canada. The Cryogenic Engineering Conference Board was both generous and skillful in helping to initiate this new conference and their guidance and acceptance is gratefully acknowledged. The Cryogenic Engineering Conference program chairman, M. J. Hiza, greatly facilitated the interaction for the two conferences and provided valuable assistance in generat ing a workable program. The proceedings of the 1975 Cryogenic Engineering Conference are published as Volume 21 of the Advances in Cryogenic Engineering and include many papers indicating innovative use of new cryogenic materials properties data.
Download or read book High Temperature Oxidation and Corrosion of Metals written by David John Young and published by Elsevier. This book was released on 2008-08-06 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is concerned with providing a fundamental basis for understanding the alloy-gas oxidation and corrosion reactions observed in practice and in the laboratory. Starting with a review of the enabling thermodynamic and kinetic theory, it analyzes reacting systems of increasing complexity. It considers in turn corrosion of a pure metal by a single oxidant and by multi-oxidant gases, followed by corrosion of alloys producing a single oxide then multiple reaction products. The concept of “diffusion paths is used in describing the distribution of products in reacting systems, and diffusion data is used to predict reaction rates whenever possible. Provides a logical and expert treatment of the subject for use as a guide for advanced-level academics, researchers and practitioners Text is well supported by numerous micrographs, phase diagrams and tabulations of relevant thermodynamic and kinetic data Combines physical chemistry and materials science methodologies
Download or read book Bibliography of Scientific and Technical Bibliographies Subject index written by and published by . This book was released on 1968 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemically Reacting Flow written by Robert J. Kee and published by John Wiley & Sons. This book was released on 2017-09-27 with total page 1013 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the theoretical underpinnings and practical applications of chemically reacting flow Chemically Reacting Flow: Theory, Modeling, and Simulation, Second Edition combines fundamental concepts in fluid mechanics and physical chemistry while helping students and professionals to develop the analytical and simulation skills needed to solve real-world engineering problems. The authors clearly explain the theoretical and computational building blocks enabling readers to extend the approaches described to related or entirely new applications. New to this Second Edition are substantially revised and reorganized coverage of topics treated in the first edition. New material in the book includes two important areas of active research: reactive porous-media flows and electrochemical kinetics. These topics create bridges between traditional fluid-flow simulation approaches and transport within porous-media electrochemical systems. The first half of the book is devoted to multicomponent fluid-mechanical fundamentals. In the second half the authors provide the necessary fundamental background needed to couple reaction chemistry into complex reacting-flow models. Coverage of such topics is presented in self-contained chapters, allowing a great deal of flexibility in course curriculum design. • Features new chapters on reactive porous-media flow, electrochemistry, chemical thermodynamics, transport properties, and solving differential equations in MATLAB • Provides the theoretical underpinnings and practical applications of chemically reacting flow • Emphasizes fundamentals, allowing the analyst to understand fundamental theory underlying reacting-flow simulations • Helps readers to acquire greater facility in the derivation and solution of conservation equations in new or unusual circumstances • Reorganized to facilitate use as a class text and now including a solutions manual for academic adopters Computer simulation of reactive systems is highly efficient and cost-effective in the development, enhancement, and optimization of chemical processes. Chemically Reacting Flow: Theory, Modeling, and Simulation, Second Edition helps prepare graduate students in mechanical or chemical engineering, as well as research professionals in those fields take utmost advantage of that powerful capability.
Download or read book Bibliography of Scientific and Technical Bibliographies written by and published by . This book was released on 1968 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature Durability Considerations for HSCT Combustor written by Nathan S. Jacobson and published by . This book was released on 1992 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Note written by and published by . This book was released on 1975 with total page 910 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat transfer Coefficients for Hydrogen Flowing Through Parallel Hexagonal Passages at Surface Temperatures to 2275 K written by Jack G. Slaby and published by . This book was released on 1968 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt:
