Download or read book Anisotropic Doubly Curved Shells written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2019-11-01 with total page 1199 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present in depth several Higher-order Shear Deformation Theories (HSDTs) by means of a unified approach for the mechanical analysis of doubly-curved shell structures made of anisotropic and composite materials. In particular, the strong and weak formulations of the corresponding governing equations are discussed and illustrated. The approach presented in this volume is completely general and represents a valid tool to investigate the structural behavior of many arbitrarily shaped structures. An isogeometric mapping procedure is also illustrated to this aim. Special attention is given also to advanced and innovative constituents, such as Carbon Nanotubes (CNTs), Variable Angle Tow (VAT) composites and Functionally Graded Materials (FGMs). In addition, several numerical applications are developed to support the theoretical models. Accurate, efficient and reliable numerical techniques able to approximate both derivatives and integrals are presented, which are respectively the Differential Quadrature (DQ) and Integral Quadrature (IQ) methods. Finally, two numerical techniques, named Strong Formulation Finite Element Method (SFEM) and Weak Formulation Finite Element Method (WFEM), are developed to deal with multi-element domains characterized by arbitrary shapes and discontinuities.

Download or read book Algebraic Geometry between Tradition and Future written by Gilberto Bini and published by Springer Nature. This book was released on 2023-05-05 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: An incredible season for algebraic geometry flourished in Italy between 1860, when Luigi Cremona was assigned the chair of Geometria Superiore in Bologna, and 1959, when Francesco Severi published the last volume of the treatise on algebraic systems over a surface and an algebraic variety. This century-long season has had a prominent influence on the evolution of complex algebraic geometry - both at the national and international levels - and still inspires modern research in the area. "Algebraic geometry in Italy between tradition and future" is a collection of contributions aiming at presenting some of these powerful ideas and their connection to contemporary and, if possible, future developments, such as Cremonian transformations, birational classification of high-dimensional varieties starting from Gino Fano, the life and works of Guido Castelnuovo, Francesco Severi's mathematical library, etc. The presentation is enriched by the viewpoint of various researchers of the history of mathematics, who describe the cultural milieu and tell about the bios of some of the most famous mathematicians of those times.

Download or read book Geometry and Complex Variables written by S. Coen and published by Routledge. This book was released on 2017-11-22 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference presents the proceedings of an international meeting on the occasion of theUniversity of Bologna's ninth centennial-highlighting the latest developments in the field ofgeometry and complex variables and new results in the areas of algebraic geometry,differential geometry, and analytic functions of one or several complex variables.Building upon the rich tradition of the University of Bologna's great mathematics teachers, thisvolume contains new studies on the history of mathematics, including the algebraic geometrywork of F. Enriques, B. Levi, and B. Segre ... complex function theory ideas of L. Fantappie,B. Levi, S. Pincherle, and G. Vitali ... series theory and logarithm theory contributions of P.Mengoli and S. Pincherle ... and much more. Additionally, the book lists all the University ofBologna's mathematics professors-from 1860 to 1940-with precise indications of eachcourse year by year.Including survey papers on combinatorics, complex analysis, and complex algebraic geometryinspired by Bologna's mathematicians and current advances, Geometry and ComplexVariables illustrates the classic works and ideas in the field and their influence on today'sresearch.

Download or read book Laminated Composite Doubly Curved Shell Structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2016-05-17 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: The title, “Laminated Composite Doubly-Curved Shell Structures. Differential al Geometry and Higher-order Theories” illustrates the theme treated and the prospective followed during the composition of the present work. The aim of this manuscript is to analyze the static and dynamic behavior of thick and moderately thick composite shells through the application of the Differential Quadrature (DQ) method. The book is divided into two volumes wherein the principal higher order structural theories are illustrated in detail and the mechanical behavior of doubly-curved structures are presented by several static and dynamic numerical applications. In particular, the first volume is mainly theoretical, whereas the second one is mainly related to the numerical DQ technique and its applications in the structural field. The starting point to analyze higher-order structural theories is given by the so-called Unified Formulation (UF), which allows to consider and study several kinematic models in a unified manner. Both the Equivalent Single Layer (ESL) and Layer-Wise (LW) approaches are presented. A particular attention is paid to composite materials, due to their increasing development and use in many engineering fields during the last years.

Download or read book Theory of Laminated Composite Doubly Curved Shell Structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2017-01-09 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manuscript comes from the experience gained over thirteen years of study and research on shell structures. The title, Theory of Laminated Composite Doubly-Curved Shell Structures, illustrates the theme followed in the present volume. The present study aims to analyze the static and dynamic behavior of moderately thick shells made of composite materials. A particular attention is paid, other than fibrous and laminated composites, also to “Functionally graded materials” (FGMs). They are non-homogeneous materials, characterized by a continuous varia on of the mechanical properties through a particular direction. In particular, the present manuscript was written as an attempt to show, in an easy way, the theoretical aspects of doubly-curved composite shell structures. Furthermore, it focuses only on the theoretical aspects related to laminated composite doubly-curved shell structures and represents a shortened version of the book entitled: Mechanics of Laminated Composite Doubly-Curved Shell Structures by the same authors, wherein also the numerical part has been presented. The present volume is aimed at Master degree and PhD students in structural and applied mechanics, as well as experts in these fields. The present volume is divided into six chapters, in which static and dynamic analyses of several structural elements are provided in detail. Furthermore, the results of the adopted numerical technique are presented for several problems such as different loading and boundary conditions.

Download or read book Bollettino della Unione matematica italiana written by Unione matematica italiana and published by . This book was released on 2003 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Generalized Differential and Integral Quadrature written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2023-10-17 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of this book is to analyze the mathematical fundamentals and the main features of the Generalized Differential Quadrature (GDQ) and Generalized Integral Quadrature (GIQ) techniques. Furthermore, another interesting aim of the present book is to shown that from the two numerical techniques mentioned above it is possible to derive two different approaches such as the Strong and Weak Finite Element Methods (SFEM and WFEM), that will be used to solve various structural problems and arbitrarily shaped structures. A general approach to the Differential Quadrature is proposed. The weighting coefficients for different basis functions and grid distributions are determined. Furthermore, the expressions of the principal approximating polynomials and grid distributions, available in the literature, are shown. Besides the classic orthogonal polynomials, a new class of basis functions, which depend on the radial distance between the discretization points, is presented. They are known as Radial Basis Functions (or RBFs). The general expressions for the derivative evaluation can be utilized in the local form to reduce the computational cost. From this concept the Local Generalized Differential Quadrature (LGDQ) method is derived. The Generalized Integral Quadrature (GIQ) technique can be used employing several basis functions, without any restriction on the point distributions for the given definition domain. To better underline these concepts some classical numerical integration schemes are reported, such as the trapezoidal rule or the Simpson method. An alternative approach based on Taylor series is also illustrated to approximate integrals. This technique is named as Generalized Taylor-based Integral Quadrature (GTIQ) method. The major structural theories for the analysis of the mechanical behavior of various structures are presented in depth in the book. In particular, the strong and weak formulations of the corresponding governing equations are discussed and illustrated. Generally speaking, two formulations of the same system of governing equations can be developed, which are respectively the strong and weak (or variational) formulations. Once the governing equations that rule a generic structural problem are obtained, together with the corresponding boundary conditions, a differential system is written. In particular, the Strong Formulation (SF) of the governing equations is obtained. The differentiability requirement, instead, is reduced through a weighted integral statement if the corresponding Weak Formulation (WF) of the governing equations is developed. Thus, an equivalent integral formulation is derived, starting directly from the previous one. In particular, the formulation in hand is obtained by introducing a Lagrangian approximation of the degrees of freedom of the problem. The need of studying arbitrarily shaped domains or characterized by mechanical and geometrical discontinuities leads to the development of new numerical approaches that divide the structure in finite elements. Then, the strong form or the weak form of the fundamental equations are solved inside each element. The fundamental aspects of this technique, which the author defined respectively Strong Formulation Finite Element Method (SFEM) and Weak Formulation Finite Element Method (WFEM), are presented in the book.

Download or read book Hygro Thermo Magneto Electro Elastic Theory of Anisotropic Doubly Curved Shells written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2023-10-13 with total page 1073 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to present in depth several Higher-order Shear Deformation Theories (HSDTs) by means of a unified approach for studying the Hygro-Thermo-Magneto-Electro- Elastic Theory of Anisotropic Doubly-Curved Shells. In particular, a general coupled multifield theory regarding anisotropic shell structures is provided. The three-dimensional multifield problem is reduced in a two-dimensional one following the principles of the Equivalent Single Layer (ESL) approach and the Equivalent Layer-Wise (ELW) approach, setting a proper configuration model. According to the adopted configuration assumptions, several Higher-order Shear Deformation Theories (HSDTs) are obtained. Furthermore, the strong and weak formulations of the corresponding governing equations are discussed and illustrated. The approach presented in this volume is completely general and represents a valid tool to investigate the physical behavior of many arbitrarily shaped structures. An isogeometric mapping procedure is also illustrated to this aim. Special attention is given also to advanced and innovative constituents, such as Carbon Nanotubes (CNTs), Variable Angle Tow (VAT) composites and Functionally Graded Materials (FGMs). In addition, several numerical applications are used to support the theoretical models. Accurate, efficient and reliable numerical techniques able to approximate both derivatives and integrals are considered, which are respectively the Differential Quadrature (DQ) and Integral Quadrature (IQ) methods. The Theory of Composite Thin Shells is derived in a simple and intuitive manner from the theory of thick and moderately thick shells (First-order Shear Deformation Theory or Reissner- Mindlin Theory). In particular, the Kirchhoff-Love Theory and the Membrane Theory for composite shells are shown. Furthermore, the Theory of Composite Arches and Beams is also exposed. In particular, the equations of the Timoshenko Theory and the Euler-Bernoulli Theory are directly deducted from the equations of singly-curved shells of translation and of plates.

Download or read book Mechanics of laminated Composite doubly curvel shell structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2014-03-01 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manuscript comes from the experience gained over ten years of study and research on shell structures and on the Generalized Differential Quadrature method. The title, Mechanics of Laminated Composite Doubly-Curved Shell Structures, illustrates the theme followed in the present volume. The present study aims to analyze the static and dynamic behavior of moderately thick shells made of composite materials through the application of the Differential Quadrature (DQ) technique. A particular attention is paid, other than fibrous and laminated composites, also to “Functionally Graded Materials” (FGMs). They are non-homogeneous materials, characterized by a continuous variation of the mechanical properties through a particular direction. The GDQ numerical solution is compared, not only with literature results, but also with the ones supplied and obtained through the use of different structural codes based on the Finite Element Method (FEM). Furthermore, an advanced version of GDQ method is also presented. This methodology is termed Strong Formulation Finite Element Method (SFEM) because it employs the strong form of the differential system of equations at the master element level and the mapping technique, proper of FEM. The connectivity between two elements is enforced through compatibility conditions.

Download or read book Library of Congress Catalogs written by Library of Congress and published by . This book was released on 1976 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Laminated Composite Doubly Curved Shell Structures written by Francesco Tornabene and published by Società Editrice Esculapio. This book was released on 2021-12-01 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manuscript comes from the experience gained over ten years of study and research on shell structures and on the Generalized Differential Quadrature method. The title, Mechanics of Laminated Composite Doubly-Curved Shell Structures, illustrates the theme followed in the present volume. The present study aims to analyze the static and dynamic behavior of moderately thick shells made of composite materials through the application of the Differential Quadrature (DQ) technique. A particular attention is paid, other than fibrous and laminated composites, also to “Functionally Graded Materials” (FGMs). They are non-homogeneous materials, characterized by a continuous variation of the mechanical properties through a particular direction. The GDQ numerical solution is compared, not only with literature results, but also with the ones supplied and obtained through the use of different structural codes based on the Finite Element Method (FEM). Furthermore, an advanced version of GDQ method is also presented. This methodology is termed Strong Formulation Finite Element Method (SFEM) because it employs the strong form of the differential system of equations at the master element level and the mapping technique, proper of FEM. The connectivity between two elements is enforced through compatibility conditions.

Download or read book Esercizi di Analisi Matematica 1 Geometria e Algebra Lineare written by Gabriele Grillo and published by Società Editrice Esculapio. This book was released on 2022-08-05 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Questo eserciziario raccoglie parte del materiale adottato dagli autori per le esercitazioni di Analisi Matematica I e Geometria presso il Politecnico di Milano. Una peculiarità di tali corsi è la presenza sia degli argomenti classici di Analisi Matematica I (numeri complessi, serie numeriche, limiti di funzioni, derivate, studi di funzione, calcolo integrale), sia di una parte consistente di Algebra Lineare (rette e piani nello spazio, teorema di rappresentazione, nucleo e immagine di una mappa lineare, sistemi lineari, cambiamento di base e diagonalizzazione). Proponiamo qui un numero consistente di esercizi, tutti risolti, su ciascuno degli argomenti sopra indicati. Il materiale è stato riadattato e presentato in maniera sistematica in modo da essere, a nostro parere, utilizzabile in forma modulare in diversi corsi di matematica di base presso corsi di Laurea in Ingegneria, Fisica, Chimica, Biologia, Scienze Naturali e altri.

Download or read book Bollettino della Unione matematica italiana written by and published by . This book was released on 1923 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Catalogue of Scientific Papers 1800 1900 ser 1 1800 1863 written by Royal Society (Great Britain) and published by . This book was released on 1868 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rendiconti Del Seminario Matematico Della Universit Di Padova written by and published by . This book was released on 1988 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Bulletin of the American Mathematical Society written by American Mathematical Society and published by . This book was released on 1921 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rendiconti Del Circolo Matematico Di Palermo written by Circolo matematico di Palermo and published by . This book was released on 1892 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: