Download or read book Ergonomics in the Automotive Design Process written by Vivek D. Bhise and published by CRC Press. This book was released on 2016-04-19 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The auto industry is facing tough competition and severe economic constraints. Their products need to be designed "right the first time" with the right combinations of features that not only satisfy the customers but continually please and delight them by providing increased functionality, comfort, convenience, safety, and craftsmanship. Based on t

Download or read book Handbook of Automotive Human Factors written by Motoyuki Akamatsu and published by CRC Press. This book was released on 2019-06-14 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to advances in computer technology in the last twenty years, navigation system, cabin environment control, ACC, advanced driver assistance system (ADAS) and automated driving have become a part of the automobile experience. Improvement in technology enables us to design these with greater flexibility and provide greater value to the driver (human centered design). To achieve this, research is required by laboratories, automobile and auto parts manufacturers. Although there has been a lot of effort in human factors research and development, starting from basic research to product development, the knowledge and experience has not been integrated optimally. The aim of this book is to collect and review the information for researchers, designers and developers to learn and apply them for further research and development of human centered design of future automotive technologies. Automotive human factors include psychological, physiological, mathematical, engineering and even sociological aspects. This book offers valuable insights to applying the right approach in the right place.

Download or read book An Introduction to Modern Vehicle Design written by Julian Happian-Smith and published by Elsevier. This book was released on 2001 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Modern Vehicle Design starts from basic principles and builds up analysis procedures for all major aspects of vehicle and component design. Subjects of current interest to the motor industry - such as failure prevention, designing with modern material, ergonomics, and control systems - are covered in detail, with a final chapter discussing future trends in automotive design. Extensive use of illustrations, examples, and case studies provides the reader with a thorough understanding of design issues and analysis methods.

Download or read book Digital Human Modeling written by Vincent D. Duffy and published by Springer. This book was released on 2007-08-24 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the First International Conference on Digital Human Modeling, DHM 2007, held in Beijing, China in July 2007. The papers thoroughly cover the thematic area of digital human modeling, addressing the following major topics: shape and movement modeling and anthropometry, building and applying virtual humans, medical and rehabilitation applications, as well as industrial and ergonomic applications.

Download or read book Automotive Product Development written by Vivek D. Bhise and published by CRC Press. This book was released on 2017-05-08 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about how to develop future automotive products by applying the latest methodologies based on a systems engineering approach and by taking into account many issues facing the auto industry such as meeting government safety, emissions and fuel economy regulations, incorporating advances in new technology applications in structural materials, power trains, vehicle lighting systems, displays and telematics, and satisfying the very demanding customer. It is financially disastrous for any automotive company to create a vehicle that very few people want. To design an automotive product that will be successful in the marketplace requires carefully orchestrated teamwork of experts from many disciplines, substantial amount of resources, and application of proven techniques at the right time during the product development process. Automotive Product Development: A Systems Engineering Implementation is intended for company management personnel and graduate students in engineering, business management and other disciplines associated with the development of automotive and other complex products.

Download or read book Automotive Ergonomics written by B. Peacock and published by CRC Press. This book was released on 1993-03-26 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This important book focuses on the role of human factors in the design and use of automobiles. It should review current knowledge of human characteristics as related to passenger car design and thus serve as a basis for new car design and design evaluation. Comprehensive and accessible, the book is organized around the following themes: human capabilities and limitations in car design - anthropometry, biomechanics, human vision, motorskills, and cognition; the physical aspects of car design - occupant packaging', entry and egress, seating, luggage loading, occupant protection, thermal environment; informational aspects of design - displays and controls, HUDS, icons, warnings, vehicle lighting and sounds; and special topics such as driving performance models, driver workload, older drivers, and computer-aided ergonomic design.; It is Aimed At Automotive Designers, Government Agencies Concerned With Car passenger transport issues and the ergonomics research community.

Download or read book Production Ergonomics written by Cecilia Berlin and published by Ubiquity Press. This book was released on 2017-06-28 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production ergonomics – the science and practice of designing industrial workplaces to optimize human well-being and system performance – is a complex challenge for a designer. Humans are a valuable and flexible resource in any system of creation, and as long as they stay healthy, alert and motivated, they perform well and also become more competent over time, which increases their value as a resource. However, if a system designer is not mindful or aware of the many threats to health and system performance that may emerge, the end result may include inefficiency, productivity losses, low working morale, injuries and sick-leave. To help budding system designers and production engineers tackle these design challenges holistically, this book offers a multi-faceted orientation in the prerequisites for healthy and effective human work. We will cover physical, cognitive and organizational aspects of ergonomics, and provide both the individual human perspective and that of groups and populations, ending up with a look at global challenges that require workplaces to become more socially and economically sustainable. This book is written to give you a warm welcome to the subject, and to provide a solid foundation for improving industrial workplaces to attract and retain healthy and productive staff in the long run.

Download or read book Automotive Ergonomics written by Nikolaos Gkikas and published by CRC Press. This book was released on 2016-04-19 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last 20 years, technological developments have set new standards in driver-vehicle interaction. These developments effect the entire lifecycle, from the moment a customer enters a dealership to examine a prospective vehicle, to the driving experience during the vehicle lifecycle, and the interaction with other road users and facilities in pl

Download or read book Human Factors in Automotive Engineering and Technology written by Professor Neville A Stanton and published by Ashgate Publishing, Ltd.. This book was released on 2015-06-28 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering a unique perspective on vehicle design and on new developments in vehicle technology, this book bridges the gap between engineers, who design and build cars, and human factors, as a body of knowledge with considerable value in this domain. The work that forms the basis of the book represents more than 40 years of experience by the authors. It offers actionable design guidance, combined with a set of case studies highly relevant to current technological challenges in vehicle design.

Download or read book Ergonomics written by Pamela McCauley and published by CRC Press. This book was released on 2011-12-13 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete introduction to the field, Ergonomics: Foundational Principles, Applications and Technologies discusses scientific principles, research, applications, and emerging trends in technology. Covering the foundational principles and major topics in physical ergonomics, the book contains the necessary components of a quality ergonomics course,

Download or read book The Multisensory Driver written by Dr Cristy Ho and published by Ashgate Publishing, Ltd.. This book was released on 2012-10-01 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Driver inattention has been identified as one of the leading causes for car accidents. The problem of distraction while driving is likely to worsen, partly due to increasingly complex in-car technologies. However, intelligent transport systems are being developed to assist drivers and to ensure a safe road environment. One approach to the design of ergonomic automobile systems is to integrate our understanding of the human information processing systems into the design process. This book aims to further the design of ergonomic multisensory interfaces using research from the fast-growing field of cognitive neuroscience. It focuses on two aspects of driver information-processing in particular: multisensory interactions and the spatial distribution of attention in driving. The Multisensory Driver provides interface design guidelines together with a detailed review of current cognitive neuroscience and behavioural research in multisensory human perception, which will help the development of ergonomic interfaces. The discussion on spatial attention is particularly relevant for car interface designers, but it will also appeal to cognitive psychologists interested in spatial attention and the applications of these theoretical research findings. Giving a detailed description of a cohesive series of psychophysical experiments on multisensory warning signals, conducted in both laboratory and simulator settings, this book provides an approach for those in the engineering discipline who wish to test their systems with human observers.

Download or read book Eco Driving written by Rich C. Mcllroy and published by CRC Press. This book was released on 2017-10-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-driving has the potential to save fuel and reduce emissions without having to make any changes to vehicles or road infrastructure. This book provides an in-depth understanding of the contemporary issues in the human factors aspects of eco-driving strategies and interfaces and the effects on driver behaviour. A review of the literature concerning design, behaviour, and energy use led to an exploration of Ecological Interface Design, and the Skills, Rules, and Knowledge (SRK) taxonomy of human behaviour, particularly with regard to haptic information presented through the accelerator pedal. This book explains that eco-driving can be performed by anyone in control of a vehicle.

Download or read book Ergonomics in the Automotive Design Process written by Vivek D. Bhise and published by CRC Press. This book was released on 2024-06-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive design continues to evolve at a rapid pace. As electric cars become ever more commonplace on the roads to the advent of the driverless vehicle, understanding the ergonomics behind automotive engineering becomes ever more paramount. Vehicle attributes must be considered early during the new vehicle development program by coordinated work of multi-disciplinary teams to begin creating vehicle specifications and development of vehicle attribute requirements. In Ergonomics in the Automotive Design Process: Concepts, Issues and Methods, Vivek D. Bhise covers the need-to-know fundamentals as to what makes an ergonomically sound vehicle. This book covers the entire range of ergonomics issues involved in designing a car or truck and offers evaluation techniques to avoid costly mistakes and assure high customer satisfaction. Across 13 chapters, vehicle design and the attributes of vehicle handling, appearance (interior and exterior styling), safety and security, infotainment, noise and vibrations, emissions, costs and process compatibility are considered in the context of ergonomics. New material to this edition includes coverage of ergonomics in the systems engineering process, decision-making and risks in automotive product programs and ergonomic considerations in electric vehicle development. This book will allow the reader to develop a more comprehensive knowledge of issues facing the developers of automotive products and delivers methods to manage communication, coordination and integration processes. It provides more tools in implementing systems engineering to minimize the risks of delays and cost overruns, and most importantly, creates the right product for its customers. The reader will develop a knowledge of future in- vehicle devices that are easy to program and use, safe, cheap to manufacture and assemble and are eco-friendly From an author with over forty years of experience in automotive design, this title is an ideal read for students and practitioners of ergonomics, human factors, automotive design, civil engineering, product design, work design and mechanical engineering. Vivek D. Bhise is currently a LEO Lecturer/ Visiting Professor and a Professor in post-retirement of Industrial and Manufacturing Systems Engineering at the University of Michigan-Dearborn. He received his B.Tech. in Mechanical Engineering (1965) from the Indian Institute of Technology, Bombay, India, M.S. in Industrial Engineering (1966) from the University of California, Berkeley, and PhD in Industrial and Systems Engineering (1971) from the Ohio State University, Columbus, Ohio. During 1973 to 2001, he held several management and research positions at the Ford Motor Company in Dearborn, Michigan.

Download or read book Designing Interaction and Interfaces for Automated Vehicles written by Neville Stanton and published by CRC Press. This book was released on 2021-03-10 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Driving automation and autonomy are already upon us and the problems that were predicted twenty years ago are beginning to appear. These problems include shortfalls in expected benefits, equipment unreliability, driver skill fade, and error-inducing equipment designs. Designing Interaction and Interfaces for Automated Vehicles: User-Centred Ecological Design and Testing investigates the difficult problem of how to interface drivers with automated vehicles by offering an inclusive, human-centred design process that focusses on human variability and capability in interaction with interfaces. This book introduces a novel method that combines both systems thinking and inclusive user-centred design. It models driver interaction, provides design specifications, concept designs, and the results of studies in simulators on the test track, and in road going vehicles. This book is for designers of systems interfaces, interactions, UX, Human Factors and Ergonomics researchers and practitioners involved with systems engineering and automotive academics._ "In this book, Prof Stanton and colleagues show how Human Factors methods can be applied to the tricky problem of interfacing human drivers with vehicle automation. They have developed an approach to designing the human-automation interaction for the handovers between the driver and the vehicle. This approach has been tested in driving simulators and, most interestingly, in real vehicles on British motorways. The approach, called User-Centred Ecological Interface Design, has been validated against driver behaviour and used to support their ongoing work on vehicle automation. I highly recommend this book for anyone interested, or involved, in designing human-automation interaction in vehicles and beyond." Professor Michael A. Regan, University of NSW Sydney, AUSTRALIA

Download or read book Automotive Ergonomics written by Heiner Bubb and published by Springer Nature. This book was released on 2021-10-19 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ergonomics teaches how to design technology in such a way that it is optimally adapted to the needs, wishes and characteristics of the user. In this context, the concept of the human-machine system has become established. In a systematic way and with a detailed view of the complicated technical and perceptual psychological and methodological connections, this book explains the basics of automotive ergonomics with numerous examples. The application is shown in examples such as package, design of displays and control elements, of environmental ergonomics such as lighting, sound, vibrations, climate and smell. The design of driver assistance systems from an ergonomic perspective is also a central topic. The book is rounded off by methods of ergonomic vehicle development, the use of mock-ups, driving simulators and tests in real vehicles and prototypes. For the first time, those responsible in the automotive industry and in the field of relevant research are provided with a specialized systematic work that provides the ergonomic findings in the design of today's automobiles. This provides planners and designers of today's automobiles with concrete information for ergonomic product development, enabling them to keep an eye on decisive requirements and subsequent customer acceptance. This book is a translation of the original German 1st edition Automobilergonomie by Heiner Bubb, Klaus Bengler, Rainer E. Grünen & Mark Vollrath, published by Springer Fachmedien Wiesbaden GmbH, part of Springer Nature in 2015. The translation was done with the help of artificial intelligence (machine translation by the service DeepL.com). A subsequent human revision was done primarily in terms of content, so that the book will read stylistically differently from a conventional translation. Springer Nature works continuously to further the development of tools for the production of books and on the related technologies to support the authors.

Download or read book Automotive Development Processes written by Julian Weber and published by Springer Science & Business Media. This book was released on 2009-06-22 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global crisis the automotive industry has slipped into over the second half of 2008 has set a fierce spotlight not only on which cars are the right ones to bring to the market but also on how these cars are developed. Be it OEMs developing new models, suppliers integerating themselves deeper into the development processes of different OEMs, analysts estimating economical risks and opportunities of automotive investments, or even governments creating and evaluating scenarios for financial aid for suffering automotive companies: At the end of the day, it is absolutely indispensable to comprehensively understand the processes of auto- tive development – the core subject of this book. Let’s face it: More than a century after Carl Benz, Wilhelm Maybach and Gottlieb Daimler developed and produced their first motor vehicles, the overall concept of passenger cars has not changed much. Even though components have been considerably optimized since then, motor cars in the 21st century are still driven by combustion engines that transmit their propulsive power to the road s- face via gearboxes, transmission shafts and wheels, which together with spri- damper units allow driving stability and ride comfort. Vehicles are still navigated by means of a steering wheel that turns the front wheels, and the required control elements are still located on a dashboard in front of the driver who operates the car sitting in a seat.

Download or read book Human Factors Methods written by Neville Stanton and published by Ashgate Publishing, Ltd.. This book was released on 2013 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Human Factors Methods: A Practical Guide for Engineering and Design now presents 107 design and evaluation methods including numerous refinements to those that featured in the original. The book acts as an ergonomics methods manual, aiding both students and practitioners. Offering a 'how-to' text on a substantial range of ergonomics methods, the eleven sections represent the different categories of ergonomics methods and techniques that can be used in the evaluation and design process.