Download or read book Equipment Qualification for Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-12-09 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on a structured approach to the establishment and preservation of equipment qualification in nuclear installations, to confirm reliable performance of safety functions by such equipment during operational states and accident conditions, to avoid vulnerability due to common cause failure of the equipment. It applies primarily to equipment that performs one or more safety functions, but it may also be applied to items not important to safety, in accordance with national requirements. The qualification process covers electrical, instrumentation and control, and active mechanical equipment, and components associated with it, for example, seals, gaskets, lubricants, cables, connections, and mounting/anchoring structures. The qualification process for passive mechanical components for which the safety performance is assured by design in accordance with applicable codes, is outside the scope of this publication. The recommendations in this Safety Guide apply to new nuclear installations, and as far as is reasonably practicable to existing nuclear installations.
Download or read book Equipment Qualification in Operational Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is based on information presented at two IAEA Technical Committee meetings held within the framework of the IAEA Project on Operational Safety Guidance in 1993 and 1994. The document was prepared to provide guidance to Member States in assessing the status of equipment qualification (EQ) in operational nuclear power plants and in preserving this status. It offers methods and practices for activities which are necessary for a successful implementation of periodical safety reviews. The report should be of value for all countries that are parties to the Convention on Nuclear Safety, which entered into force on 24 October 1996 and stipulates the review and, where necessary, the upgrading of the safety of existing nuclear installations.
Download or read book Equipment Qualification for Nuclear Installations written by International Atomic Energy Agency and published by . This book was released on 2022-02-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This Safety Guide provides recommendations on a structured approach to the establishment and preservation of equipment qualification in nuclear installations, to confirm reliable performance of safety functions by such equipment during operational states and accident conditions, to avoid vulnerability due to common cause failure of the equipment. It applies primarily to equipment that performs one or more safety functions, but it may also be applied to items not important to safety, in accordance with national requirements. The qualification process covers electrical, instrumentation and control, and active mechanical equipment, and components associated with it, for example, seals, gaskets, lubricants, cables, connections, and mounting/anchoring structures. The qualification process for passive mechanical components for which the safety performance is assured by design in accordance with applicable codes, is outside the scope of this publication. The recommendations in this Safety Guide apply to new nuclear installations, and as far as is reasonably practicable to existing nuclear installations."--Publisher's description.
Download or read book A Guide to Qualification of Electrical Equipment for Nuclear Power Plants written by and published by . This book was released on 1983 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Model Development for Equipment Qualification Temperature Profiles at Commercial Nuclear Power Plants written by Stuart R. Douglass and published by . This book was released on 2013 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Basis for Environmental Qualification of Microprocessor based Safety related Equipment in Nuclear Power Plants written by and published by . This book was released on 1998 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document presents the results of studies sponsored by the Nuclear Regulatory Commission (NRC) to provide the technical basis for environmental qualification of computer-based safety equipment in nuclear power plants. The studies were conducted by Oak Ridge National Laboratory (ORNL), Sandia National Laboratories (SNL), and Brookhaven National Laboratory (BNL). The studies address the following: (1) adequacy of the present test methods for qualification of digital I and C systems; (2) preferred (i.e., Regulatory Guide-endorsed) standards; (3) recommended stressors to be included in the qualification process during type testing; (4) resolution of need for accelerated aging for equipment to be located in a benign environment; and (5) determination of an appropriate approach for addressing the impact of smoke in digital equipment qualification programs. Significant findings from the studies form the technical basis for a recommended approach to the environmental qualification of microprocessor-based safety-related equipment in nuclear power plants.
Download or read book Electrical Systems for Nuclear Power Plants written by Dr. Omar S. Mazzoni and published by John Wiley & Sons. This book was released on 2018-10-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers all aspects of electrical systems for nuclear power plants written by an authority in the field Based on author Omar Mazzoni's notes for a graduate level course he taught in Electrical Engineering, this book discusses all aspects of electrical systems for nuclear power plants, making reference to IEEE nuclear standards and regulatory documents. It covers such important topics as the requirements for equipment qualification, acceptance testing, periodic surveillance, and operational issues. It also provides excellent guidance for students in understanding the basis of nuclear plant electrical systems, the industry standards that are applicable, and the Nuclear Regulatory Commission's rules for designing and operating nuclear plants. Electrical Systems for Nuclear Power Plants offers in-depth chapters covering: elements of a power system; special regulations and requirements; unique requirements of a Class 1E power system; nuclear plants containment electrical penetration assemblies; on-site emergency AC sources; on-site emergency DC sources; protective relaying; interface of the nuclear plant with the grid; station blackout (SBO) issues and regulations; review of electric power calculations; equipment aging and decommissioning; and electrical and control systems inspections. This valuable resource: Evaluates industry standards and their relationship to federal regulations Discusses Class 1E equipment, emergency generation, the single failure criterion, plant life, and plant inspection Includes exercise problems for each chapter Electrical Systems for Nuclear Power Plants is an ideal text for instructors and students in electrical power courses, as well as for engineers active in operating nuclear power plants.
Download or read book NRC Regulatory Guides written by U.S. Nuclear Regulatory Commission and published by . This book was released on 1973 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of currently available electronic versions of NRC regulatory guides.
Download or read book IEEE Standard for Qualification of Equipment Used in Nuclear Facilities written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design and Qualification for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2003 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on a generally accepted way to design a nuclear power plant so that an earthquake motion at the site will not jeopardize the safety of the plant. It also gives guidance on a consistent application of methods and procedures for analysis, testing and qualification of structures and equipment so that they meet the safety requirements covering the design of nuclear power plants, safety assessments for the design and the regulatory issues concerned with the licensing of plants.
Download or read book Human Factors Engineering in the Design of Nuclear Power Plants IAEA Safety Standards Series No Ssg 51 written by International Atomic Energy Agency and published by . This book was released on 2019-08-31 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides recommendations and guidance for meeting Requirement 32 of IAEA Safety Standards Series No. SSR-2/1 (Rev. 1), Safety of Nuclear Power Plants: Design, for optimal operator performance involving systematic consideration of human factors, including the human machine interface (HMI). The Safety Guide provides a structured approach and guidance on application of human factors engineering (HFE) in the design of the HMI, which is the basis for human physical and cognitive processes in nuclear power plants. It applies to application of HFE in the design, operation and maintenance of the HMI for new plants, as well as for modifications of the HMI of existing plants.
Download or read book Draft Standard for Qualification of Equipment Used in Nuclear Facilities written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
Download or read book Quality Assurance for Safety in Nuclear Power Plants and Other Nuclear Installations written by International Atomic Energy Agency and published by . This book was released on 1996 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the summer of 1957 when both their dogs are poisoned, twelve-year-old Jeff must come to terms with his own Jewish identity and with his best friend's brutality and prejudice.
Download or read book Nuclear Facilities Electrical Equipment Important to Safety Qualification written by British Standards Institute Staff and published by . This book was released on 1916-03-31 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: Type testing, Electronic equipment and components, Nuclear reactors, Safety measures, Electric power stations, Vibration testing, Thermal testing, Electrical equipment, Nuclear power, Specimen preparation, Environmental testing, Qualification approval, Seismic loading, Planning, Nuclear safety, Radiation hazards, Testing conditions, Extrapolation, Safety devices, Technical documents, Design, Corrosion tests, Performance, Performance testing, Nuclear-electric power stations, Accelerated testing, Ageing tests
Download or read book Format and Content of the Safety Analysis Report for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-09-22 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the structure and content of the safety analysis report to be submitted by the operating organization to the regulatory body for authorization of the siting, construction, commissioning, operation and decommissioning of a nuclear power plant. It is intended to facilitate both the development of the safety analysis report by the operating organization and the checking of its completeness and adequacy by the regulatory body. The publication is a revision of IAEA Safety Standards Series No. GS-G-4.1, Format and Content of the Safety Analysis Report for Nuclear Power Plants, which it supersedes. The revision reflects feedback experience from the Fukushima Daiichi accident and the subsequent stress tests performed. It also describes good practices and experience from the use of safety analysis reports for newly built nuclear power plants in different States and informs on recent progress made in approaches to safety assessment.
Download or read book Qualification of Active Mechanical Equipment Used in Nuclear Facilities written by and published by . This book was released on 2017 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: