Download or read book Equipment and Components in the Oil and Gas Industry written by Karan Sotoodeh and published by . This book was released on 2024 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Equipment and Components in the Oil and Gas Industry Volume 1 written by Karan Sotoodeh and published by CRC Press. This book was released on 2024-05-03 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equipment and Components in the Oil and Gas Industry Volume 1: Equipment provides an overview of the equipment used in the oil and gas industry, as well as various stages of the oil and gas industry, including geology, exploration, drilling, transportation, and refining. Using practical industry examples and an accessible approach, the book is a key reference point for those seeking to learn more about the industry. The equipment used in the oil and gas industry is wide ranging, from drilling equipment and wellhead equipment, such as casings, tubing, and wellhead Christmas trees, to equipment for the transportation of fluids and gases, such as pumps and compressors. The book presents a simplified method to choose the correct equipment for each task, as well as covering the selection of heat exchangers and storage tanks. Finally, this book covers turbines, motors, and other prime movers, alongside a flare system for disposing of unwanted or waste gases in oil and gas refineries and petrochemical plants. This book will be of interest to mechanical and chemical engineers working in the oil and gas industry.
Download or read book Equipment and Components in the Oil and Gas Industry Volume 2 written by Karan Sotoodeh and published by CRC Press. This book was released on 2024-05-03 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equipment and Components in the Oil and Gas Industry Volume 2: Components provides an overview of the components used in the oil and gas industry, including instrumentation, pipe components, and safety components. Using practical industry examples and an accessible approach, the book is a key reference point for those seeking to learn more about the industry. Covering both larger and smaller components used throughout the oil and gas industry, the book details the theory behind pressure gauges, temperature gauges, flow gauges, and level gauges. It then goes on to discuss piping components, such as pipes, flanges, and gaskets and introduces piping special components. Valves are particularly crucial to the oil and gas industry, including on/off valves, control valves, safety valves, and special valves. The book also details actuators, sprinklers, fire and gas detectors, hoses, and hose reels, along with electrical components such as switches, cables, wires, and cable glands. Finally, the book ends with a discussion of heating, ventilation, and air conditioning (HVAC) components. This book will be of interest to mechanical and chemical engineers working in the oil and gas industry.
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industry Profile written by Canada. Industry, Science and Technology Canada and published by . This book was released on 1988 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturers of oil and gas field equipment in Canada produce a wide variety of machinery and components used in the exploration, drilling and servicing of oil and gas wells, and in the production and processing of oil and gas. This Industry Profile is one of a series of papers which assess, in a summary form, the current competitiveness of Canada's industrial sectors, taking into account technological and other key factors, and changes anticipated under the Canada-U.S. Free Trade Agreement.
Download or read book Fundamentals of Investing in Oil and Gas written by Chris Termeer and published by Chris Termeer. This book was released on 2013 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intent of this book is to educate the reader about the vast complexities of the oil and gas industry and to motivate involvement in domestic oil and gas development, production and refinement. Explains the industry in non-technical language for an average person.
Download or read book Handbook of Materials Failure Analysis with Case Studies from the Oil and Gas Industry written by Abdel Salam Hamdy Makhlouf and published by Butterworth-Heinemann. This book was released on 2015-09-01 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Materials Failure Analysis: With Case Studies from the Oil and Gas Industry provides an updated understanding on why materials fail in specific situations, a vital element in developing and engineering new alternatives. This handbook covers analysis of materials failure in the oil and gas industry, where a single failed pipe can result in devastating consequences for people, wildlife, the environment, and the economy of a region. The book combines introductory sections on failure analysis with numerous real world case studies of pipelines and other types of materials failure in the oil and gas industry, including joint failure, leakage in crude oil storage tanks, failure of glass fibre reinforced epoxy pipes, and failure of stainless steel components in offshore platforms, amongst others. - Introduces readers to modern analytical techniques in materials failure analysis - Combines foundational knowledge with current research on the latest developments and innovations in the field - Includes numerous compelling case studies of materials failure in oil and gas pipelines and drilling platforms
Download or read book Oil and Gas Surface Wellhead and Christmas Tree written by Okon Obo, PhD and published by Okon Obo, PhD. This book was released on 2012-11-30 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook illustrates, describes, and states the functions of various components that constitute an important petroleum industry system through which oil and gas are produced – that is, “Wellhead and Christmas Tree”. Sitting just above the wellbore, this complex system is a window to hydrocarbon reservoir. Illustratively, this equipment assembly is laid out component-by-component – thereby simplifying its complexity for easy understanding, even for non-technical persons. From this illustrated Handbook, readers will discover distinctions between Wellhead and Christmas tree, including: · Brief Descriptions/Functions of Wellhead and Christmas tree · Various Components that constitute Wellhead Assembly · Various Components that constitute Christmas Tree assembly · Components common in Wellhead and Christmas Tree Assemblies · Wellhead and Christmas Tree Sub-Assemblies · Terminations of casing string and production tubing at the Wellhead · Complete illustration of “Oil & Gas Surface Wellhead and Christmas Tree”, with its Casing String and tubing.
Download or read book Corrosion and Materials in the Oil and Gas Industries written by Reza Javaherdashti and published by CRC Press. This book was released on 2016-04-19 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way d
Download or read book Subsea Valves and Actuators for the Oil and Gas Industry written by Karan Sotoodeh and published by Gulf Professional Publishing. This book was released on 2021-05-29 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piping and valve engineers rely on common industrial standards for selecting and maintaining valves, but these standards are not specific to the subsea oil and gas industry. Subsea Valves and Actuators for the Oil and Gas Industry delivers a needed reference to go beyond the standard to specify how to select, test, and maintain the right subsea oil and gas valve for the project. Each chapter focuses on a specific type of valve with a built-in structured table on valve selection, helping guide the engineer to the most efficient valve. Covering subsea-specific protection, the reference also gives information on high pressure protection systems (HIPPS) and discusses corrosion management within the subsea sector, such as Hydrogen Induced Stress Cracking Corrosion (HISC). Additional benefits include understanding the concept of different safety valves in subsea, selecting different valves and actuators located on subsea structures such as Christmas trees, manifolds, and HIPPS modules, with a full detail review including sensors, logic solver, and solenoid which is designed to save cost and improve the reliability in the subsea system. Rounding out with chapters on factory acceptance testing (FAT) and High Integrity Pressure Protection Systems (HIPPS), Subsea Valves and Actuators for the Oil and Gas Industry gives subsea engineers and managers a much-needed tool to better understand today's subsea technology. - Understand practical information about all types of subsea valves and actuators with over 600 visuals and several case studies - Learn and review the applicable standards and specifications from API and ISO in one convenient location - Protect your assets with a high-pressure protection system (HIPPS) and subsea-specific corrosion management including Hydrogen Induced Stress Cracking Corrosion (HISC)
Download or read book Analytical Techniques in the Oil and Gas Industry for Environmental Monitoring written by Melissa N. Dunkle and published by John Wiley & Sons. This book was released on 2020-07-10 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough introduction to environmental monitoring in the oil and gas industry Analytical Techniques in the Oil and Gas Industry for Environmental Monitoring examines the analytical side of the oil and gas industry as it also provides an overall introduction to the industry. You’ll discover how oil and natural gas are sourced, refined, and processed. You can learn about what’s produced from oil and natural gas, and why evaluating these sourced resources is important. The book discusses the conventional analyses for oil and natural gas feeds, along with their limitations. It offers detailed descriptions of advanced analytical techniques that are commercially available, plus explanations of gas and oil industry equipment and instrumentation. You’ll find technique descriptions supplemented with a list of references as well as with real-life application examples. With this book as a reference, you can prepare to apply specific analytical methods in your organization’s lab environment. Analytical Techniques can also serve as your comprehensive resource on key techniques in the characterization of oil and gas samples, within both refinery and environmental contexts. Understand of the scope of oil and gas industry techniques available Consider the benefits and limitations of each available process Prepare for applying analytical techniques in your lab See real examples and a list of references for each technique Read descriptions of off-line analytics, as well as on-line and process applications As a chemist, engineer, instructor, or student, this book will also expand your awareness of the role these techniques have in environmental monitoring and environmental impact assessments.
Download or read book A Competitive Assessment of the U S Oil Field Equipment Industry written by and published by . This book was released on 1985 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petroleum and Gas Field Processing written by Hussein K. Abdel-Aal and published by CRC Press. This book was released on 2015-09-18 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many oil production processes present a significant challenge to the oil and gas field processing facilities and equipment design. The optimization of the sequential operations of handling the oil–gas mixture can be a major factor in increasing oil and gas production rates and reducing operating costs. Petroleum and Gas Field Processing provides an all-inclusive guide to surface petroleum operations and solves these and other problems encountered in the field processing of oil and gas. Fully revised and updated to reflect major changes over the past decade or so, this second edition builds on the success attained in the first edition. It delivers an expanded and updated treatment that covers the principles and procedures related to the processing of reservoir fluids for the separation, handling, treatment, and production of quality petroleum oil and gas products. With five new chapters, this second edition covers additional subjects, in particular natural gas, economics and profitability, oil field chemicals, and piping and pumps. The book also contains worked-out examples and case studies from a variety of oil field operations.
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. - Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control - Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control - Handy index of chemical substances as well as a general chemical index
Download or read book The Petroleum Handbook written by Shell and published by Elsevier. This book was released on 1986-12-01 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: Those connected with the petroleum industry will need no introduction to The Petroleum Handbook. It is a technically-oriented manual whose aim is to provide explanations of the processes of today's petroleum industry, from crude oil exploration to product end use, with some historical background and explanation of the economic context in which the oil, gas and petrochemical businesses operation. Much of the material in this sixth edition is completely new and includes the latest information on world oil and gas reserves, future prospects, transportation, storage, refining, marketing, research, and environmental conservation.
Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Elsevier. This book was released on 2013-10-15 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. - Selects cost-effective methods to control corrosion - Quantitatively measures and estimates corrosion rates - Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others - Provides a gateway to more than 1,000 industry best practices and international standards
Download or read book Numerical List of Manufactured Products written by United States. Bureau of the Census and published by . This book was released on 1978 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
