Download or read book Epoxidised Natural Rubber written by Siti Salina Sarkawi and published by Springer Nature. This book was released on 2023-06-03 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a complete guide to epoxidized natural rubber covering from the epoxidation chemistry, production process, raw rubber and compound properties, mixing recommendations as its applications in tire, engineering, general and industrial rubber goods, latex based products such as adhesive, foam and paint as well as sustainability or life cycle analysis of ENR rubber. Hence, it is useful for readers either from the industry which looking for specific product application and properties, or scientists and academicians working on their research using the ENR in their study for reference and guidance.

Download or read book Developments in Rubber Technology 4 written by K.S. Lee and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, the fourth in a series which began in 1979, covers a greater variety of subjects than any previous single volume. The basis of selection has been topical interest; hence the tailor-making of polymers to develop specific properties, methods of improving com pound processability and the use of rubbers in the oil industry are featured alongside a discussion of safety aspects. We have again sought the cooperation of the foremost authorities on the chosen subjects and have been delighted at the response which has yielded a list of authors of international repute. A. w. K. S. L. CONTENTS Preface v List of Contributors ix 1. Recent Developments in Synthetic Rubbers by Anionic Polymerization 1 I. G. HARGIS, R. A. LIVIGNI and S. L. AGGARWAL 2. Advances in Nitrile Rubber (NBR) 57 P. W. MILNER 3. Epoxidized Natural Rubber. 87 C. S. L. BAKER and I. R. GELLING 4. Process Aids and Plasticizers . 119 B. G. CROWTHER 5. A Review of Elastomers Used for Oilfield Sealing Environments . 159 W. N. K. REVOLTA and G. C. SWEET 6. Using Modern Mill Room Equipment . 193 H. ELLWOOD 7. Quality Requirements and Rubber Mixing . 221 P. S. JOHNSON 8. Health and Safety . . 253 B. G. WILLOUGHBY Index . 307 vii LIST OF CONTRIBUTORS s. L. AGGARWAL Gen Corp , Research Division, 2990 Gilchrist Road, Akron, Ohio 44305, USA C. S. L. BAKER Malaysian Rubber Producers' Research Association, Tun Abdul Razak Laboratory, Brickendonbury, Hertford SG13 8NL, UK B. G.

Download or read book Journal of Polymer Materials written by and published by . This book was released on 1992 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Blends of Natural Rubber written by K.C. Jones and published by Springer Science & Business Media. This book was released on 1997-12-31 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blends of natural rubber with speciality synthetic rubbers, such as nitrile rubber and ethylene propylene rubbers, have, in the past, failed to combine the best properties of polymers, resulting in a poor return in terms of added value from the blending process. The idea of blending synthetic rubbers with natural rubbe is certainly not a new one, but it is only now that this can be shown to be possible with consistently positive resluts, but eh use of novel techniques which this book describes, giving valuable information on the technology required and the results which can be achieved. Blends of Natural Rubber is an invaluable source of information for all those working in the area of rubber technology and polymer blend technology.

Download or read book Chemistry Manufacture and Applications of Natural Rubber written by Shinzo Kohjiya and published by Woodhead Publishing. This book was released on 2021-03-24 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry, Manufacture and Applications of Natural Rubber, Second Edition presents the latest advances in the processing, properties and advanced applications of natural rubber (NR), drawing on state-of-the-art research in the field. Chapters cover manufacturing, processing and properties of natural rubber, describing biosynthesis, vulcanization for improved performance, strain-induced crystallization, self-reinforcement, rheology and mechanochemistry for processing, computer simulation of properties, scattering techniques and stabilizing agents. Applications covered include natural rubber, carbon allotropes, eco-friendly soft bio-composites using NR matrices and marine products, the use of NR for high functionality such as shape memory, NR for the tire industry, and natural rubber latex with advanced applications. This is an essential resource for academic researchers, scientists and (post)graduate students in rubber science, polymer science, materials science and engineering, and chemistry. In industry, this book enables professionals, R&D, and producers across the natural rubber, tire, rubber and elastomer industries, as well as across industries looking to use natural rubber products, to understand and utilize natural rubber for cutting-edge applications. - Explains the latest manufacture and processing techniques for natural rubber (NR) with enhanced properties - Explores novel applications of natural rubber across a range of industries, including current and potential uses - Discusses resources and utilization, and considers sustainable future development of natural rubber

Download or read book Handbook of Epoxy Blends written by Jyotishkumar Parameswaranpillai and published by Springer. This book was released on 2017-07-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference work compiles and summarizes the available information on epoxy blends. It covers all essential areas – the synthesis, processing, characterization and applications of epoxy blends – in a comprehensive manner. The handbook is highly application-oriented and thus serves as a valuable, authoritative reference guide for researchers, engineers, and technologists working on epoxy blends, but also for graduate and postgraduate students, polymer chemists, and faculties at universities and colleges.The handbook is divided into three parts and organized by the types of blends and components: Part I covers epoxy rubber blends, Part II focuses on epoxy thermoplastic blends, and Part III examines epoxy block-copolymer blends. Each part starts with an introduction, and the individual chapters provide readers with comprehensive information on the synthesis and processing, analysis and characterization, properties and applications of the different epoxy blends. All parts conclude with a critical evaluation of the applications, weighing their advantages and drawbacks. Leading international experts from corporate and academic research institutions and universities discuss the correlations of different epoxy blend properties with their macro-, micro- and nanostructures. This handbook thus offers a rich resource for newcomers to the field, and a major reference work for experienced researchers, the first of its kind available on the market. As epoxies find extremely broad applications, e.g. in oil & gas, in the chemical industry, building and construction industry, automotive, aviation and aerospace, boat building and marine applications, in adhesives and coatings, and many more, this handbook addresses researchers and practitioners from all these fields.

Download or read book Encyclopedia of Polymer Science and Engineering Identification to Lignin written by Herman F. Mark and published by Wiley-Interscience. This book was released on 1987-05-04 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Entirely rewritten, this multi-volume work has been expanded to reflect the vast changes that have occurred in polymer and plastics technology over the past 20 years. After the initial volume, 16 more volumes have been published, with a supplement and an index volume.

Download or read book Spectroscopy of Rubbers and Rubbery Materials written by Victor M. Litvinov and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the application of spectroscopic techniques for characterisation of chemical and physical structures in viscoelastic materials, such as unvulcanised elastomers and their vulcanisates, various rubbery materials and some plastics, which when blended with particular additives (plasticisers) behave like rubbers. Analysis of the rubbery materials is complicated by the fact that rubbery products, such as tyres, tubes, seals, V-belts and hoses, contain in the rubbery matrix a significant amount of various compounds, i.e., fillers, vulcanising agents, antioxidants and plasticisers. Due to the complex composition, no single technique can provide a good understanding of the effect of chemical and physical structures on the functional properties of rubbery materials. Thus spectroscopy has become a powerful tool for the determination of polymer structures. The most comprehensive information on chemical and physical structures in relation to material properties can be obtained by using a combination of macroscopic techniques and methods that provide information on the molecular level. frequently used for analysis of rubbery materials, i.e., various methods of nuclear magnetic resonance (NMR) and optical spectroscopy. The main objective of this present book is to discuss a wide range of applications of the spectroscopic techniques for the analysis of rubbery materials. The book brings together the various spectroscopic techniques for obtaining the following information: chemical structure of rubbery materials, network structure analysis, heterogeneity of rubbery materials, physical properties of rubbery materials, functional properties and stability of rubbery materials, processing of rubbery materials and quality control. The contents of this book are of interest to chemists, physicists, material scientists and technologists who seek a better understanding of rubbery materials.

Download or read book Flexible and Stretchable Electronic Composites written by Deepalekshmi Ponnamma and published by Springer. This book was released on 2015-10-16 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first comprehensive collection of electronic aspects of different kinds of elastomer composites, including combinations of synthetic, natural and thermoplastic elastomers with different conducting fillers like metal nanoparticles, carbon nanotubes, or graphenes, and many more. It covers elastomer composites, which are useful in electronic applications, including chemical and physical as well as material science aspects. The presented elastomer composites have great potential for solving emerging new material application requirements, for example as flexible and wearable electronics. The book is structured and organized by the rubber/elastomer type: each chapter describes a different elastomer matrix and its composites. While introducing to important fundamentals, it is application-oriented, discussing the current issues and challenges in the field of elastomer composites. This book will thus appeal to researchers and scientists, to engineers and technologists, but also to graduate students, working on elastomer composites, or on electronics engineering with the composites, providing the readers with a sound introduction to the field and solutions to both fundamental and applied problems.

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Polymer Latices written by D.C. Blackley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Latices, Second Edition is a comprehensive update of the previous edition, High Polymer Latices, taking into account the many developments since it was first published in 1966. It is the only publication to provide such an outstanding and extensive review of latex science and technology, from background theory and principles, to modern day applications. It will prove an invaluable reference source for all those working in the area of latex science and technology, such as colloid chemists, polymer scientists, and materials processors.

Download or read book The Chemistry of Oils and Fats written by Frank Gunstone and published by John Wiley & Sons. This book was released on 2009-02-12 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three major macronutrients are proteins, carbohydrates, andlipids (oils and fats). This book is devoted to lipids, which arean important part of life for all of us. What are these materialsin molecular terms? Where do they come from? What happens to thembetween the harvesting of crops and the appearance of the oils andfats in different products in the supermarket? How does natureproduce these molecules and can we act on nature to modify thematerials to increase their beneficial properties? How importantare the minor products present in the fats that we consume? Sinceoils and fats vary, how can we analyse them? What are theirphysical, chemical and nutritional properties? How do the fats thatwe consume affect our health and well-being in both quantitativeand qualitative terms? What are their major food and non-fooduses? This book provides a broad source of reference on oils and fatschemistry for graduates entering the food and oleochemicalindustries, postgraduate researchers and nutritionists. It offers apoint of entry to the detailed literature.

Download or read book Adhesion and Adhesives Technology written by Alphonsus V. Pocius and published by Hanser Gardner Publications. This book was released on 2002 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes, in clear, understandable language, the three main disciplines of adhesion technology:

Download or read book Encyclopedia of Polymer Science and Engineering written by and published by . This book was released on 1985 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Natural Rubber Science and Technology written by A. D. Roberts and published by Oxford University Press, USA. This book was released on 1988 with total page 1168 pages. Available in PDF, EPUB and Kindle. Book excerpt: A summary of the current position in the study of rubber, its fundamental properties and the uses to which it is put, from everyday to extraordinary applications, with pointers to the future.

Download or read book Chemistry for Pharmacy Students written by Professor Satyajit D. Sarker and published by John Wiley & Sons. This book was released on 2013-05-28 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book has succeeded in covering the basic chemistry essentials required by the pharmaceutical science student... the undergraduate reader, be they chemist, biologist or pharmacist will find this an interesting and valuable read." –Journal of Chemical Biology, May 2009 Chemistry for Pharmacy Students is a student-friendly introduction to the key areas of chemistry required by all pharmacy and pharmaceutical science students. The book provides a comprehensive overview of the various areas of general, organic and natural products chemistry (in relation to drug molecules). Clearly structured to enhance student understanding, the book is divided into six clear sections. The book opens with an overview of general aspects of chemistry and their importance to modern life, with particular emphasis on medicinal applications. The text then moves on to a discussion of the concepts of atomic structure and bonding and the fundamentals of stereochemistry and their significance to pharmacy- in relation to drug action and toxicity. Various aspects of aliphatic, aromatic and heterocyclic chemistry and their pharmaceutical importance are then covered with final chapters looking at organic reactions and their applications to drug discovery and development and natural products chemistry. accessible introduction to the key areas of chemistry required for all pharmacy degree courses student-friendly and written at a level suitable for non-chemistry students includes learning objectives at the beginning of each chapter focuses on the physical properties and actions of drug molecules

Download or read book ECO COMPASS written by Xiaosu Yi and published by MDPI. This book was released on 2019-04-25 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, mainly man-made materials, such as carbon and glass fibers, are used to produce composite parts in aviation. Renewable materials, such as natural fibers or bio-sourced resin systems, have not yet found their way into aviation. The project ECO-COMPASS aims to evaluate the potential applications of ecologically improved composite materials in the aviation sector in an international collaboration of Chinese and European partners. Natural fibers such as flax and ramie will be used for different types of reinforcements and sandwich cores. Furthermore, bio-based epoxy resins to substitute bisphenol-A based epoxy resins in secondary structures are under investigation. Adapted material protection technologies to reduce environmental influence and to improve fire resistance are needed to fulfil the demanding safety requirements in aviation. Modelling and simulation of chosen eco-composites aims for an optimized use of materials while a Life Cycle Assessment aims to prove the ecological advantages compared to synthetic state-of-the-art materials. This Special Issue provides selected papers from the project consortium partners.