Download or read book Environmentally Benign Pulping written by Pratima Bajpai and published by Springer Nature. This book was released on 2023-02-05 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the most up-to-date and comprehensive information on the state-of-the-art techniques and aspects involved in environment-friendly pulping technologies. Traditional chemical and semi-chemical pulping processes are not environmentally friendly. Therefore, it has become important to look for alternative approaches to mitigate wastewater emissions in the paper industry, by making more stringent regulations to improve environmental conservation. In response to this problem, new raw materials need to be explored to replace traditional choices and also new pulping processes need to be developed based on less polluting, more easily recovered reagents. This book presents new and emerging deep eutectic solvents for lignocellulosic biomass pretreatment, and discusses the effects of deep eutectic solvents on biomass pretreatment and the production of value-added products. It also introduces biotechnological methods of pulping. Biotechnological processes help to make manufacturing processes cleaner and more efficient by reducing toxic chemical pollution and greenhouse gas emissions. Given its scope, this book is of interest to applied chemists, foresters, chemical engineers, wood scientists, along with engineers and researchers involved in the pulp and paper industry as a valuable reference.
Download or read book Environmentally Benign Approaches for Pulp Bleaching written by Pratima Bajpai and published by Elsevier. This book was released on 2012-05-30 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and paper production has increased globally and will continue to increase in the near future. Approximately 155 million tons of wood pulp is produced worldwide and about 260 million is projected for 2010. To cope with the increasing demand, an increase in production and improved environmental performance is needed as the industry is under constant pressure to reduce environmental emissions to air and water. This book gives updated information on environmentally benign approaches for pulp bleaching, which can help solve the problems associated with conventional bleaching technologies. Main focus is on the environmentally-friendly technologies that can help solve some of the problems associated with conventional bleaching technologies Information given is up-to-date, authoritative, and cites the experiences of many mills and pertinent research, which is of interest to those working in the industry or intending to do so Covers in great depth all the aspects of various bleaching processes including environmental issues
Download or read book Environmentally Benign Approaches for Pulp Bleaching written by Pratima Bajpai and published by Elsevier. This book was released on 2005-08-05 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and paper production has increased globally and will continue to increase in the near future. Approximately 155 millions tons of wood pulp is produced worldwide and about 260 millions is projected for 2010. To cope with the increasing demand, an increase in production and improved environmental performance is needed as the industry is under constant pressure to reduce environmental emissions to air and water. This book gives updated information on environmentally benign approaches for pulp bleaching, which can help solve the problems associated with conventional bleaching technologies. * Main focus is on the environmentally friendly technologies that can help solve some of the problems associated with conventional bleaching technologies * Information given is up-to-date, authoritative and cites the experiences of many mills and pertinent research, which is of interest to those working in the industry or intending to do so * Covers in great depth all the aspects of various bleaching processes including environmental issues
Download or read book Environmentally Friendly Technologies for the Pulp and Paper Industry written by Raymond A. Young and published by John Wiley & Sons. This book was released on 1997-11-19 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solving the pulp and paper industries' environmental problems is essential to maintaining the forest industry and accommodating the changing economic needs of forest communities. This book explores the construction of new mills--operating on new technology that does not produce pollutants--which are vital to the pulp and paper industry.
Download or read book Environmentally Benign Approaches for Pulp Bleaching written by Pratima Bajpai and published by Gulf Professional Publishing. This book was released on 2005-09-23 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Introduction. -- 2. General background. -- 3. Options for environmentally benign bleaching. -- 4. ECF and TCF bleaching. -- 5. Chlorine free bleaching of secondary fibers. -- 6. Closed cycle bleach plant.
Download or read book Pulp and Paper Processing written by Salim Newaz Kazi and published by BoD – Books on Demand. This book was released on 2018-10-03 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives emphasis to wood fiber raw materials, alternative sources of fibers for paper production, environmental issues, paper quality improvement and cost of paper production. Varieties of non-wood raw materials, including kenaf, rice straw, empty fruit bunches of palm trees, bamboo, bagasse, etc., are considered in this book. The process of fiber treatment also varied to meet paper quality improvement. Different organosolv processes of fiber treatment are discussed. Considering contemporary issues, one particular chapter analyzes the environmentally friendly way of processing non-wood fibers for paper production. The book also contains a chapter on the by-product raw materials of paper production and their profitable applications.
Download or read book Environmentally Friendly Production of Pulp and Paper written by Pratima Bajpai and published by John Wiley & Sons. This book was released on 2011-03-21 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Implementing Cleaner Production in the pulp and paper industry The large—and still growing—pulp and paper industry is a capital- and resource-intensive industry that contributes to many environmental problems, including global warming, human toxicity, ecotoxicity, photochemical oxidation, acidification, nutrification, and solid wastes. This important reference for professionals in the pulp and paper industry details how to improve manufacturing processes that not only cut down on the emission of pollutants but also increase productivity and decrease costs. Environmentally Friendly Production of Pulp and Paper guides professionals in the pulp and paper industry to implement the internationally recognized process of Cleaner Production (CP). It provides updated information on CP measures in: Raw material storage and preparation Pulping processes (Kraft, Sulphite, and Mechanical) Bleaching, recovery, and papermaking Emission treatment and recycled fiber processing In addition, the book includes a discussion on recent cleaner technologies and their implementation status and benefits in the pulp and paper industry. Covering every aspect of pulping and papermaking essential to the subject of reducing pollution, this is a must-have for paper and bioprocess engineers, environmental engineers, and corporations in the forest products industry.
Download or read book Green Chemistry and Sustainability in Pulp and Paper Industry written by Pratima Bajpai and published by Springer. This book was released on 2015-06-23 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features in-depth and thorough coverage of Minimum Impact Mill Technologies which can meet the environmental challenges of the pulp and paper industry and also discusses Mills and Fiberlines that encompass “State-of-the-Art” technology and management practices. The minimum impact mill does not mean "zero effluent", nor is it exclusive to one bleaching concept. It is a much bigger concept which means that significant progress must be made in the following areas: Water Management, Internal Chemical Management, Energy Management, Control and Discharge of Non-Process Elements and Removal of Hazardous Pollutants. At the moment, there is no bleached kraft pulp mill operating with zero effluent. With the rise in environmental awareness due to the lobbying by environmental organizations and with increased government regulation there is now a trend towards sustainability in the pulp and paper industry. Sustainable pulp and paper manufacturing requires a holistic view of the manufacturing process. During the last decade, there have been revolutionary technical developments in pulping, bleaching and chemical recovery technology. These developments have made it possible to further reduce loads in effluents and airborne emissions. Thus, there has been a strong progress towards minimum impact mills in the pulp and paper industry. The minimum-impact mill is a holistic manufacturing concept that encompasses environmental management systems, compliance with environmental laws and regulations and manufacturing technologies.
Download or read book Pulp and Paper Processing written by Salim Newaz Kazi and published by . This book was released on 2018 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives emphasis to wood fiber raw materials, alternative sources of fibers for paper production, environmental issues, paper quality improvement and cost of paper production. Varieties of non-wood raw materials, including kenaf, rice straw, empty fruit bunches of palm trees, bamboo, bagasse, etc., are considered in this book. The process of fiber treatment also varied to meet paper quality improvement. Different organosolv processes of fiber treatment are discussed. Considering contemporary issues, one particular chapter analyzes the environmentally friendly way of processing non-wood fibers for paper production. The book also contains a chapter on the by-product raw materials of paper production and their profitable applications.
Download or read book Green Pulp and Paper Industry written by Amit Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-07-19 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides recent developments and future perspectives of pulp and paper processing based on biotechnology to replace conventional environmental unfriendly chemical processes. The use of microorganism and microbial enzymes in various processes such as bleaching, deinking, refining, dissolving pulp, debarking & pitch removal, slime control, wastewater treatment and waste material valorisation are discussed.
Download or read book Pulping the South written by Ricardo Carriere and published by Zed Books. This book was released on 1996-08-15 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expansion of the pulp and paper industry is one of the most important causes of land and water conflicts in the South. This book examines the threat to livelihood, soil and biodiversity generated by large-scale pulpwood plantations in the South.
Download or read book Advances in Environmental Science and Engineering written by Reza Iranpour and published by Trans Tech Publications Ltd. This book was released on 2012-05-14 with total page 6600 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volumes contain selected papers in the fields of Environmental Chemistry and Biology; Environmental Materials; Environmental Safety and Health; Environmental Planning and Assessment; Environmental Analysis and Monitoring; Environmental Engineering; Pollution Control Projects (Air, Water, Solid); Waste Disposal and Recycling; Water Supply and Drainage Engineering; Sound, Noise and Vibration Control; Clean Production Processes; Hydrology and Water Resources Engineering; Architectural Environment & Equipment Engineering; Soil and Water Conservation and Desertification Control; Environmental Protection; Cultivation and Conservation of Forest; Plant Protection and Biotechnology; Geographic Information and Remote Sensing Science; Land Resources Environment and Urban Planning. This up-to-date, comprehensive and worldwide state-of-the art knowledge will be of great value to anyone working in these fields.
Download or read book Optimising Environmental Product Life Cycles written by and published by . This book was released on 1997 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Chemistry of Paper written by J C Roberts and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture of paper involves a large amount of chemistry, including carbohydrate chemistry, pigments and resins and colloid and surface chemistry, as well as elements of environmental and analytical chemistry. Providing an overview of the making of paper from a chemical perspective, this book deals with both the chemistry of paper as a material and the chemistry of its production. The book explores several chemical processes involved in the production of paper: the delignification of the wood fibres performed at elevated temperature and pressure, the bleaching of the cellulose-rich pulp using environmentally-friendly systems, the formation of the pulp into sheets of fibres strengthened by extensive inter-fibre hydrogen bonding, and finally the coating of the sheets in a manner appropriate to their end use. This book is an informative and entertaining overview for students and others who require an introduction to the chemistry of paper manufacture.
Download or read book Biopulping written by and published by . This book was released on 1993 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Twenty First Symposium on Biotechnology for Fuels and Chemicals written by Mark Finkelstein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: 153 posters. While plant biotechnology for enzyme production and designer biomass merged as "hot topics" throughout the Symposium, the preface for each session is included in the introductions. Special topic discussions were led on "Brazilian Bioethanol Progress" by Gisella Zanin, State University of Maringa, Brazil, and on "Nontradi tional Bioprocessing" by Gene Petersen, National Renewable Energy Labo ratory, Golden, CO. A tour of the Colorado Bioprocessing Center, a "state of the art" con tract research facility at Colorado State University highlighted the process development and scale-up activities ongoing with several industrial clients. The 1999 Charles D. Scott Award for Distinguished Contributions in the field of Biotechnology for Fuels and Chemicals was presented to Dr. Charles E. Wyman, Dartmouth College professor, Thayer School of Engineering, Hanover, New Hampshire. This award is named in honor of Dr. Charles D. Scott, the founder of this Symposium and its chair for the first ten years.
Download or read book Recycling and Deinking of Recovered Paper written by Pratima Bajpai and published by Elsevier. This book was released on 2024-06-28 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling and Deinking of Recovered Paper, Second Edition covers recent advances in recycling technologies. This second edition examines this new process, which is more eco-friendly than the virgin-papermaking process, and which uses less energy and natural resources, produces less solid waste and fewer atmospheric emissions, and helps to preserve natural resources and landfill space. In addition, the most recent information about the recycling of fibers into various grades of paper and board, the control of stickies, and the effects of recycled fiber on paper machines are also covered. Recycling technologies have been improved in recent years due to advances in pulping, flotation deinking, and cleaning/screening, resulting in the quality of paper made from secondary fibers remarkably approaching that of virgin paper. Covers all aspects of recycling technologies in great depth Offers up-to-date authoritative information and cites many mills experiences and pertinent research Examines the use of biotech methods for deinking, refining, improving drainage, and stickies control Includes new case studies on paper recycling