Download or read book Environmental Geotechnology Meeting Challenges Through Needs based Instrumentation written by Devendra Narain Singh and published by World Scientific. This book was released on 2022-01-21 with total page 861 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rise of rapid and uncontrolled industrialization, its alarming levels of hazardous waste produced, and their negative contribution to the international environmental epidemic of global warming — in addition to the decrease in room to dispose of these wastes safely — have put the pressure for many engineers, researchers, and key decision-makers to find the answers to the constant tussle between progress and sustainability — and quickly.Environmental Geotechnology revisits existing concepts of geotechnical engineering critically, and brings them up to date with new knowledge and current affairs so as to better address and serve today's needs of the professionals. It points out the role and importance of the parameters and mechanisms that govern the interaction of contaminants with geomaterials (soil and rock mass), and also discusses their degradation in the long-run, and the consequences that follow.The book starts from a engineering philosophy that incorporates the influence of environmental effects (both manmade and natural) on geotechnical engineering practices. Its contents are based on geotechnical and environmental engineering studies pertaining to waste management, such as: the safe handling, transportation and disposal of waste, the estimation of waste leakage into the subsurface, its consequences, methods of containment, and the development of schemes to remediate contaminated land. It also proposes innovative strategies for waste management through the utilization of wastes based on a comprehensive characterization.Modelling techniques such as accelerated physical modelling using geotechnical centrifuge, finite-element or difference-based numerical modelling and physico-chemico-mineralogical modelling are discussed in this book to enable the study of the complex (and otherwise slow) process of contaminant-geomaterial interaction.Related Link(s)
Download or read book Environmental Geotechnics written by Masashi Kamon and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geoenvironmental Engineering written by Lakshmi Reddi and published by CRC Press. This book was released on 2000-04-18 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applies science and engineering principles to the analysis, design, and implementation of technical schemes to characterize, treat, modify, and reuse/store waste and contaminated media. Includes site remediation.
Download or read book Geotechnical Engineering for Transportation Projects written by American Society of Civil Engineers. Geo-Institute and published by . This book was released on 2004 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 126 contains 223 papers presented at Geo-Trans 2004, held in Los Angeles, California, July 27-31, 2004.
Download or read book The Evolution of Geotech 25 Years of Innovation written by Reginald Hammah and published by CRC Press. This book was released on 2021-11-23 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication includes 82 technical papers presented at Rocscience International Conference (RIC) 2021, held online on April 20 and 21, 2021. Rocscience created this event to bring geotechnical academics, researchers and practitioners together to exchange ideas as part of celebrating 25 years of the company’s existence. The papers in these proceedings were from keynotes, panel discussions and papers, selected after careful review of over 100 technical submissions delivered at RIC 2021. The technical papers were grouped into sessions based on their subject areas. The conference aimed to stimulate discussions that could help the industry work towards overcoming geotechnical engineering limitations today. It also sought to foster creative thinking that will advance the current states of the art and practice. The keynote addresses, panel discussions and technical presentations tried to examine geotechnical problems and situations from fresh perspectives. RIC 2021 hopes that the proceedings will continue to enrich our thinking and contribute to achieving a critical mass of change in our practices and approaches. We look forward to significant improvements in our industry.
Download or read book Geotechnics of Organic Soils and Peat written by Bujang B.K. Huat and published by CRC Press. This book was released on 2014-02-18 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Peat and organic soils commonly occur as extremely soft, wet, unconsolidated surficial deposits that are an integral part of wetland systems. These types of soils can give rise to geotechnical problems in the area of sampling, settlement, stability, in situ testing, stabilisation and construction. There is therefore a tendency to either avoid build
Download or read book Proceedings of the 1st International Conference on Sustainable Waste Management through Design written by Harvinder Singh and published by Springer. This book was released on 2018-10-30 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest advances, innovations and applications in the field of waste management and environmental geomechanics as presented by leading researchers, engineers and practitioners at the International Conference on Sustainable Waste Management through Design (IC_SWMD), held in Ludhiana (Punjab), India on November 2-3, 2018. Providing a unique overview of new directions, and opportunities for sustainable and resilient design approaches to protect infrastructure and the environment, it discusses diverse topics related to civil engineering and construction aspects of the resource management cycle, from the minimization of waste, through the eco-friendly re-use and processing of waste materials, the management and disposal of residual wastes, to water treatments and technologies. It also encompasses strategies for reducing construction waste through better design, improved recovery, re-use, more efficient resource management and the performance of materials recovered from wastes. The contributions were selected by means of a rigorous peer-review process and highlight many exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different waste management specialists.
Download or read book Problematic Soils and Geoenvironmental Concerns written by Madhavi Latha Gali and published by Springer Nature. This book was released on 2020-09-11 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented during the Indian Geotechnical Conference 2018. This volume focuses on discussing the many challenges encountered in geoenvironmental engineering. The book covers sustainability aspects related to geotechnical engineering, problematic soils and ground improvement, use of geosynthetics and concepts of soil dynamics. The contents of this book will be useful to researchers and professionals working in geo-environmental engineering and to policy makers interested in understanding geotechnical concerns related to sustainable development.
Download or read book Handbook of Geotechnical Investigation and Design Tables written by Burt G. Look and published by CRC Press. This book was released on 2007-04-26 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook of properties for soils and rock contains, in a concise tabular format, the key issues relevant to geotechnical investigations, assessments and designs in common practice. In addition, there are brief notes on the application of the tables. These data tables are compiled for experienced geotechnical professionals who require a reference document to access key information. There is an extensive database of correlations for different applications. The book should provide a useful bridge between soil and rock mechanics theory and its application to practical engineering solutions. The initial chapters deal with the planning of the geotechnical investigation, the classification of the soil and rock properties and some of the more used testing is then covered. Later chapters show the reliability and correlations that are used to convert that data in the interpretative and assessment phase of the project. The final chapters apply some of these concepts to geotechnical design. This book is intended primarily for practicing geotechnical engineers working in investigation, assessment and design, but should provide a useful supplement for postgraduate courses.
Download or read book Mining and the Environment written by Karlheinz Spitz and published by CRC Press. This book was released on 2019-08-20 with total page 1145 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of mining is replete with controversy of which much is related to environmental damage and consequent community outrage. Over recent decades, this has led to increased pressure to improve the environmental and social performance of mining operations, particularly in developing countries. The industry has responded by embracing the ideals of sustainability and corporate social responsibility. Mining and the Environment identifies and discusses the wide range of social and environmental issues pertaining to mining, with particular reference to mining in developing countries, from where many of the project examples and case studies have been selected. Following an introductory overview of pressing issues, the book illustrates how environmental and social impact assessment, such as defined in "The Equator Principles", integrates with the mining lifecycle and how environmental and social management aims to eliminate the negative and accentuate the positive mining impacts. Practical approaches are provided for managing issues ranging from land acquisition and resettlement of Indigenous peoples, to the technical aspects of acid rock drainage and mine waste management. Moreover, thorough analyses of ways and means of sharing non-transitory mining benefits with host communities are presented to allow mining to provide sustainable benefits for the affected communities. This second edition of Mining and the Environment includes new chapters on Health Impact Assessment, Biodiversity and Gender Issues, all of which have become more important since the first edition appeared a decade ago. The wide coverage of issues and the many real-life case studies make this practice-oriented book a reference and key reading. It is intended for environmental consultants, engineers, regulators and operators in the field and for students to use as a course textbook. As much of the matter applies to the extractive industries as a whole, it will also serve environmental professionals in the oil and gas industries. Karlheinz Spitz and John Trudinger both have multiple years of experience in the assessment of mining projects around the world. The combination of their expertise and knowledge about social, economic, and environmental performance of mining and mine waste management has resulted in this in-depth coverage of the requirements for responsible and sustainable mining.
Download or read book Introductory Geotechnical Engineering written by Hsai-Yang Fang and published by CRC Press. This book was released on 2006-08-21 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating and blending traditional theory with particle-energy-field theory, this book provides a framework for the analysis of soil behaviour under varied environmental conditions. This book explains the why and how of geotechnical engineering in an environmental context. Using both SI and Imperial units, the authors cover: rock mechanics soil mechanics and hydrogeology soil properties and classifications and issues relating to contaminated land. Students of civil, geotechnical and environmental engineering and practitioners unfamiliar with the particle-energy-field concept, will find that this book's novel approach helps to clarify the complex theory behind geotechnics.
Download or read book Introduction to Environmental Geotechnology written by Hsai-Yang Fang and published by CRC Press. This book was released on 2016-11-03 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of a bestseller presents updated technology advances that have occurred since publication of the first edition. It increases the utility and scope of the content through numerous case studies and examples and an entirely new set of problems and solutions. The book also has an accompanying instructor's guide and presents rubrics by which instructors can increase student learning and evaluate student outcomes, chapter by chapter. The book focuses on the increasing importance of water resources and energy in the broader context of environmental sustainability. It’s interdisciplinary coverage includes soil science, physical chemistry, mineralogy, geology, ground pollution, and more.
Download or read book Introduction to Geotechnical Engineering written by Siva Sivakugan and published by . This book was released on 2015-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a concise, easy-to understand manner, INTRODUCTION TO GEOTECHNICAL ENGINEERING, 2e, presents intensive research and observation in the field and lab that have improved the science of foundation design. Now providing both U.S. and SI units, this non-calculus-based book is designed for courses in civil engineering technology programs where soil mechanics and foundation engineering are combined into one course. It is also a useful reference tool for civil engineering practitioners.
Download or read book Geotechnical Aspects of Landfill Design and Construction written by Xuede Qian and published by . This book was released on 2002 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focuses on actual, state-of-the-art design/construction procedures as opposed to a discussion of solid waste management issues and to general descriptions and/or conceptual designs. Provides an integrated package of analytical tools, design equations, and step-by-step construction procedures for all elements of a landfill, giving the reader a better sense of the necessary site investigation, planning, analysis, and organization that go into a landfill design and construction project.The characteristics of landfill containment envelopes and their design/construction are treated in detail. Physico-chemical and engineering properties of solid waste that are relevant and important to landfill design and construction are tabulated and described. Includes explanation of how to evaluate and assess potential problems that affect landfill performance such as sideslope stability, settlement, containment effectiveness, and erosion control. Discusses vertical landfill expansion; how leachate moves across a liner or barrier under both advection and diffusion; compares the containment effectiveness of different liner systems to the combined advective-diffusive transport of dissolved leachate solutes. Includes a detailed explanation with numerical examples and calculations of how to design a gas collection and piping system in a landfill—including the collection and handling of condensate in the gas. Detailed installation and inspection guidelines are provided for both earthen and geosynthetic liner/cover systems—comparing the relative advantages and limitations of each. For professional training courses in Geotechnical and Geoenvironmental Engineering.
Download or read book The Status of Natural Resources on the High seas written by Southampton Oceanography Centre and published by IUCN. This book was released on 2001 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Offshore Geotechnical Engineering written by Mark Randolph and published by CRC Press. This book was released on 2011-03-18 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design practice in offshore geotechnical engineering has grown out of onshore practice, but the two application areas have tended to diverge over the last thirty years, driven partly by the scale of the foundation and anchoring elements used offshore, and partly by fundamental differences in construction and installation techniques. As a consequence offshore geotechnical engineering has grown as a speciality. The structure of Offshore Geotechnical Engineering follows a pattern that mimics the flow of a typical offshore project. In the early chapters it provides a brief overview of the marine environment, offshore site investigation techniques and interpretation of soil behaviour. It proceeds to cover geotechnical design of piled foundations, shallow foundations and anchoring systems. Three topics are then covered which require a more multi-disciplinary approach: the design of mobile drilling rigs, pipelines and geohazards. This book serves as a framework for undergraduate and postgraduate courses, and will appeal to professional engineers specialising in the offshore industry.
Download or read book Foundation Engineering Handbook written by Hsai-Yang Fang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.