Download or read book Enhanced Virtual Prototyping written by Vladimir Herdt and published by Springer Nature. This book was released on 2020-10-14 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive set of techniques that enhance all key aspects of a modern Virtual Prototype (VP)-based design flow. The authors emphasize automated formal verification methods, as well as advanced coverage-guided analysis and testing techniques, tailored for SystemC-based VPs and also the associated Software (SW). Coverage also includes VP modeling techniques that handle functional as well as non-functional aspects and also describes correspondence analyses between the Hardware- and VP-level to utilize information available at different levels of abstraction. All approaches are discussed in detail and are evaluated extensively, using several experiments to demonstrate their effectiveness in enhancing the VP-based design flow. Furthermore, the book puts a particular focus on the modern RISC-V ISA, with several case-studies covering modeling as well as VP and SW verification aspects.
Download or read book Enhanced Virtual Prototyping written by Vladimir Herdt and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive set of techniques that enhance all key aspects of a modern Virtual Prototype (VP)-based design flow. The authors emphasize automated formal verification methods, as well as advanced coverage-guided analysis and testing techniques, tailored for SystemC-based VPs and also the associated Software (SW). Coverage also includes VP modeling techniques that handle functional as well as non-functional aspects and also describes correspondence analyses between the Hardware- and VP-level to utilize information available at different levels of abstraction. All approaches are discussed in detail and are evaluated extensively, using several experiments to demonstrate their effectiveness in enhancing the VP-based design flow. Furthermore, the book puts a particular focus on the modern RISC-V ISA, with several case-studies covering modeling as well as VP and SW verification aspects. Provides a comprehensive set of techniques to enhance all key aspects of a Virtual Prototype (VP)-based design flow Includes automated formal verification methods and advanced coverage-guided testing techniques, tailored for SystemC-based VPs Describes efficient, coverage-guided test generation methods for VP-based functional and non-functional software (SW) analysis and verification Includes correspondence analyses to utilize information between different abstraction levels in the design flow Uses several VP and SW verification case-studies that target the modern RISC-V ISA.
Download or read book Enhanced Virtual Prototyping for Heterogeneous Systems written by Muhammad Hassan and published by Springer Nature. This book was released on 2022-09-01 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a comprehensive combination of methodologies that strongly enhance the modern Virtual Prototype (VP)-based verification flow for heterogeneous systems-on-chip (SOCs). In particular, the book combines verification and analysis aspects across various stages of the VP-based verification flow, providing a new perspective on verification by leveraging advanced techniques, like metamorphic testing, data flow testing, and information flow testing. In addition, the book puts a strong emphasis on advanced coverage-driven methodologies to verify the functional behavior of the SOC as well as ensure its security. Provides an extensive introduction to the modern VP-based verification flow for heterogeneous SOCs; Introduces a novel metamorphic testing technique for heterogeneous SOCs which does not require reference models; Includes automated advanced data flow coverage-driven methodologies tailored for SystemC/AMS-based VPs; Describes enhanced functional coverage-driven methodologies to verify various functional behaviors of RF amplifiers.
Download or read book Better Software Faster written by Tom De Schutter and published by Happy About. This book was released on 2014-03-17 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent rise of "smart" products has been made possible through tight co-design of hardware and software. The growing amount of software and hence processors in applications all around us allows for increased flexibility in the application functionality through its life cycle. Not so long ago a device felt outdated after you owned it for a couple of months. Today, a continuous stream of new software applications and updates make products feel truly "smart". The result is an almost magical user experience where the same product can do more today than it could do yesterday.
In this book we dive deep into a key methodology to enable concurrent hardware/software development by decoupling the dependency of the software development from hardware availability: virtual prototyping. The ability to start software development much earlier in the design cycle drives a true "shift-left" of the entire product development schedule and results in better products that are available earlier in the market.
Throughout the book, case studies illustrate how virtual prototypes are being deployed by major companies around the world. If you are interested in a quick feel for what virtual prototyping has to offer for practical deployment, we recommend picking a few case studies to read, before diving into the details of the methodology.
Of course, this book can only offer a small snapshot of virtual prototype use cases for faster software development. However, as most software bring-up, debug and test principles are similar across markets and applications, it is not hard to realize why virtual prototypes are being leveraged whenever software is an intrinsic part of the product functionality, after reading this book.
Download or read book Creating and Using Virtual Prototyping Software written by Douglass E. Post and published by Addison-Wesley Professional. This book was released on 2021-12-28 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop, Deploy, and Sustain High-Performance Virtual Prototyping for Advanced R&D Organizations must reduce time-to-market, costs, and risks while producing higher-quality products that grow ever more complex. In response, many are turning to advanced software for rapidly creating and analyzing virtual prototypes, and accurately predicting the performance and behavior of the systems they represent. This requires a deep understanding of physics-based digital engineering and high-performance computing, as well as unique organizational and management skills. Now, Douglass Post and Richard Kendall bring together knowledge that engineers, scientists, developers, and managers will need to build, deploy, and sustain these specialized applications—including information previously available only in proprietary environments. Post and Kendall illuminate key issues with a detailed book-length case study based on their work at the U.S. DoD's pioneering Computational Research and Engineering Acquisition Tools and Environments (CREATE) program, which developed eleven of the field's most advanced software tools. You'll find a detailed roadmap for planning, organizing, managing, and navigating complex organizations to successful delivery; as well as detailed descriptions of each step in the process, with clear rationales and concrete examples. The authors share detailed references, a convenient glossary and bibliography, sidebars on overcoming real-world challenges, and more. The book reviews the essentials of computational engineering and science and the pivotal role of virtual prototyping. It helps readers to: Plan and manage the paradigm shift from physical to virtual prototyping Establish, execute, and evolve Agile processes for developing virtual prototyping software Understand and implement virtual prototyping tools and workflows Verify and validate prototyping systems to ensure accuracy and utility Recruit and retain a specialized workforce, and train and support users Explore additional emerging roles for virtual prototyping
Download or read book Virtual Prototyping written by J. Rix and published by Springer. This book was released on 2016-01-09 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: A virtual prototype is a major interim step towards the creation of a virtual environment. This book explores the simulation, interaction, concepts and tools of virtual prototypes and environments. It provides a mixture of state-of-the-art, advanced research and industrial papers.
Download or read book FPGA based Prototyping Methodology Manual written by Doug Amos and published by Happy About. This book was released on 2011 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects the best practices FPGA-based Prototyping of SoC and ASIC devices into one place for the first time, drawing upon not only the authors' own knowledge but also from leading practitioners worldwide in order to present a snapshot of best practices today and possibilities for the future. The book is organized into chapters which appear in the same order as the tasks and decisions which are performed during an FPGA-based prototyping project. We start by analyzing the challenges and benefits of FPGA-based Prototyping and how they compare to other prototyping methods. We present the current state of the available FPGA technology and tools and how to get started on a project. The FPMM also compares between home-made and outsourced FPGA platforms and how to analyze which will best meet the needs of a given project. The central chapters deal with implementing an SoC design in FPGA technology including clocking, conversion of memory, partitioning, multiplexing and handling IP amongst many other subjects. The important subject of bringing up the design on the FPGA boards is covered next, including the introduction of the real design into the board, running embedded software upon it in and debugging and iterating in a lab environment. Finally we explore how the FPGA-based Prototype can be linked into other verification methodologies, including RTL simulation and virtual models in SystemC. Along the way, the reader will discover that an adoption of FPGA-based Prototyping from the beginning of a project, and an approach we call Design-for-Prototyping, will greatly increase the success of the prototype and the whole SoC project, especially the embedded software portion. Design-for-Prototyping is introduced and explained and promoted as a manifesto for better SoC design. Readers can approach the subjects from a number of directions. Some will be experienced with many of the tasks involved in FPGA-based Prototyping but are looking for new insights and ideas; others will be relatively new to the subject but experienced in other verification methodologies; still others may be project leaders who need to understand if and how the benefits of FPGA-based prototyping apply to their next SoC project. We have tried to make each subject chapter relatively standalone, or where necessary, make numerous forward and backward references between subjects, and provide recaps of certain key subjects. We hope you like the book and we look forward to seeing you on the FPMM on-line community soon (go to www.synopsys.com/fpmm).
Download or read book Virtual Prototyping Technologies Enhanced Construction Planning written by Ting Huang and published by . This book was released on 2009 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book e Design written by Kuang-Hua Chang and published by Academic Press. This book was released on 2016-02-23 with total page 1228 pages. Available in PDF, EPUB and Kindle. Book excerpt: e-Design: Computer-Aided Engineering Design, Revised First Edition is the first book to integrate a discussion of computer design tools throughout the design process. Through the use of this book, the reader will understand basic design principles and all-digital design paradigms, the CAD/CAE/CAM tools available for various design related tasks, how to put an integrated system together to conduct All-Digital Design (ADD), industrial practices in employing ADD, and tools for product development. Comprehensive coverage of essential elements for understanding and practicing the e-Design paradigm in support of product design, including design method and process, and computer based tools and technology Part I: Product Design Modeling discusses virtual mockup of the product created in the CAD environment, including not only solid modeling and assembly theories, but also the critical design parameterization that converts the product solid model into parametric representation, enabling the search for better design alternatives Part II: Product Performance Evaluation focuses on applying CAE technologies and software tools to support evaluation of product performance, including structural analysis, fatigue and fracture, rigid body kinematics and dynamics, and failure probability prediction and reliability analysis Part III: Product Manufacturing and Cost Estimating introduces CAM technology to support manufacturing simulations and process planning, sheet forming simulation, RP technology and computer numerical control (CNC) machining for fast product prototyping, as well as manufacturing cost estimate that can be incorporated into product cost calculations Part IV: Design Theory and Methods discusses modern decision-making theory and the application of the theory to engineering design, introduces the mainstream design optimization methods for both single and multi-objectives problems through both batch and interactive design modes, and provides a brief discussion on sensitivity analysis, which is essential for designs using gradient-based approaches Tutorial lessons and case studies are offered for readers to gain hands-on experiences in practicing e-Design paradigm using two suites of engineering software: Pro/ENGINEER-based, including Pro/MECHANICA Structure, Pro/ENGINEER Mechanism Design, and Pro/MFG; and SolidWorks-based, including SolidWorks Simulation, SolidWorks Motion, and CAMWorks. Available on the companion website http://booksite.elsevier.com/9780123820389
Download or read book Design Thinking Research written by Christoph Meinel and published by Springer Nature. This book was released on 2021-03-26 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive research conducted by the Hasso Plattner Design Thinking Research Program at Stanford University in Palo Alto, California, USA, and the Hasso Plattner Institute in Potsdam, Germany, has yielded valuable insights on why and how design thinking works. The participating researchers have identified metrics, developed models, and conducted studies, which are featured in this book, and in the previous volumes of this series. This volume provides readers with tools to bridge the gap between research and practice in design thinking with varied real world examples. Several different approaches to design thinking are presented in this volume. Acquired frameworks are leveraged to understand design thinking team dynamics. The contributing authors lead the reader through new approaches and application fields and show that design thinking can tap the potential of digital technologies in a human-centered way. In a final section, new ideas in neurodesign at Stanford University and at Hasso Plattner Institute in Potsdam are elaborated upon thereby challenging the reader to consider newly developed methodologies and provide discussion of how these insights can be applied to various sectors. Special emphasis is placed on understanding the mechanisms underlying design thinking at the individual and team levels. Design thinking can be learned. It has a methodology that can be observed across multiple settings and accordingly, the reader can adopt new frameworks to modify and update existing practice. The research outcomes compiled in this book are intended to inform and provide inspiration for all those seeking to drive innovation – be they experienced design thinkers or newcomers.
Download or read book Formal and Practical Techniques for the Complex System Design Process using Virtual Prototypes written by Pascal Pieper and published by Springer Nature. This book was released on with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Virtual and Rapid Manufacturing written by Ljubomir Tanchev and published by CRC Press. This book was released on 2007-09-17 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of 120 peer-reviewed papers that were presented at the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal in September 2007. Essential reading for all those working on V&RP, focused on inducing increased collaboration between industry and academia. In addition to key
Download or read book Multimedia and Virtual Reality written by Alistair Sutcliffe and published by Psychology Press. This book was released on 2003-02-26 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily a summary of research done over 10 years in multimedia and virtual reality, which fits within a wider interest of exploiting psychological theory to improve the process of designing interactive systems. The subject matter lies firmly within the field of HCI, with some cross-referencing to software engineering. Extending Sutcliffe's views on the design process to more complex interfaces that have evolved in recent years, this book: *introduces the background to multisensory user interfaces and surveys the design issues and previous HCI research in these areas; *explains the basic psychology for design of multisensory user interfaces, including the Interactive Cognitive Subsystems cognitive model; *describes elaborations of Norman's models of action for multimedia and VR, relates these models to the ICS cognitive model, and explains how the models can be applied to predict the design features necessary for successful interaction; *provides a design process from requirements, user and domain analysis, to design of representation in media or virtual worlds and facilities for user interaction therein; *covers usability evaluation for multisensory interfaces by extending existing well-known HCI approaches of heuristic evaluation and observational usability testing; and *presents two special application areas for multisensory interfaces: educational applications and virtual prototyping for design refinement.
Download or read book Simulation and Virtual Prototyping Complete Self Assessment Guide written by Gerardus Blokdyk and published by 5starcooks. This book was released on 2018-09-10 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: How will you know that the Simulation and Virtual Prototyping project has been successful? What are the success criteria that will indicate that Simulation and Virtual Prototyping objectives have been met and the benefits delivered? How can we incorporate support to ensure safe and effective use of Simulation and Virtual Prototyping into the services that we provide? Is the Simulation and Virtual Prototyping organization completing tasks effectively and efficiently? Are there any constraints known that bear on the ability to perform Simulation and Virtual Prototyping work? How is the team addressing them? Defining, designing, creating, and implementing a process to solve a challenge or meet an objective is the most valuable role... In EVERY group, company, organization and department. Unless you are talking a one-time, single-use project, there should be a process. Whether that process is managed and implemented by humans, AI, or a combination of the two, it needs to be designed by someone with a complex enough perspective to ask the right questions. Someone capable of asking the right questions and step back and say, 'What are we really trying to accomplish here? And is there a different way to look at it?' This Self-Assessment empowers people to do just that - whether their title is entrepreneur, manager, consultant, (Vice-)President, CxO etc... - they are the people who rule the future. They are the person who asks the right questions to make Simulation and Virtual Prototyping investments work better. This Simulation and Virtual Prototyping All-Inclusive Self-Assessment enables You to be that person. All the tools you need to an in-depth Simulation and Virtual Prototyping Self-Assessment. Featuring 676 new and updated case-based questions, organized into seven core areas of process design, this Self-Assessment will help you identify areas in which Simulation and Virtual Prototyping improvements can be made. In using the questions you will be better able to: - diagnose Simulation and Virtual Prototyping projects, initiatives, organizations, businesses and processes using accepted diagnostic standards and practices - implement evidence-based best practice strategies aligned with overall goals - integrate recent advances in Simulation and Virtual Prototyping and process design strategies into practice according to best practice guidelines Using a Self-Assessment tool known as the Simulation and Virtual Prototyping Scorecard, you will develop a clear picture of which Simulation and Virtual Prototyping areas need attention. Your purchase includes access details to the Simulation and Virtual Prototyping self-assessment dashboard download which gives you your dynamically prioritized projects-ready tool and shows your organization exactly what to do next. You will receive the following contents with New and Updated specific criteria: - The latest quick edition of the book in PDF - The latest complete edition of the book in PDF, which criteria correspond to the criteria in... - The Self-Assessment Excel Dashboard, and... - Example pre-filled Self-Assessment Excel Dashboard to get familiar with results generation ...plus an extra, special, resource that helps you with project managing. INCLUDES LIFETIME SELF ASSESSMENT UPDATES Every self assessment comes with Lifetime Updates and Lifetime Free Updated Books. Lifetime Updates is an industry-first feature which allows you to receive verified self assessment updates, ensuring you always have the most accurate information at your fingertips.
Download or read book Innovation Through Information Systems written by Frederik Ahlemann and published by Springer Nature. This book was released on 2021-10-15 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the current state of research in information systems and digital transformation. Due to the global trend of digitalization and the impact of the Covid 19 pandemic, the need for innovative, high-quality research on information systems is higher than ever. In this context, the book covers a wide range of topics, such as digital innovation, business analytics, artificial intelligence, and IT strategy, which affect companies, individuals, and societies. This volume gathers the revised and peer-reviewed papers on the topic "Domain" presented at the International Conference on Information Systems, held at the University of Duisburg-Essen in 2021.
Download or read book Computational Intelligence in Industrial Application written by Yanglv Ling and published by CRC Press. This book was released on 2015-07-28 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the 2014 Pacific-Asia Workshop on Computational Intelligence in Industrial Application (CIIA 2014) include 81 peer-reviewed papers. The topics covered in the book include: (1) Computer Intelligence, (2) Application of Computer Science and Communication, (3) Industrial Engineering, Product Design and Manufacturing, (4) Automatio
Download or read book Handbook of Hardware Software Codesign written by Soonhoi Ha and published by Springer. This book was released on 2017-10-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents fundamental knowledge on the hardware/software (HW/SW) codesign methodology. Contributing expert authors look at key techniques in the design flow as well as selected codesign tools and design environments, building on basic knowledge to consider the latest techniques. The book enables readers to gain real benefits from the HW/SW codesign methodology through explanations and case studies which demonstrate its usefulness. Readers are invited to follow the progress of design techniques through this work, which assists readers in following current research directions and learning about state-of-the-art techniques. Students and researchers will appreciate the wide spectrum of subjects that belong to the design methodology from this handbook.
