Download or read book Enhanced Cu based Shape Memory Alloys for High Temperature Applications written by Zhicheng Lin and published by . This book was released on 1998 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cu Based Shape Memory Alloys written by Safaa Najah Saud Al-Humairi and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cu-Al-Ni shape memory alloys (SMAs) have been developed for high-temperature applications due to their ability to return to pre-deformed shape after heating above the transformation temperature, as well as these alloys have a small hysteresis and high transformation temperature comparing with other shape memory alloys. Adding some of the alloying elements such as Ti, Mn, Be, Zr and B or changing the interior content either Al or Ni by increasing/decreasing may have a significant effect on the phase transitions and enhance the mechanical properties of these alloys. However, the martensite phase transformation is the most important factor, which can be changing the whole properties of Cu-Al-Ni SMAs, where this phase is mainly affected by the alloying elements additions. This chapter reviews the effect of alloying elements on the phase transitions and the enhancement of the mechanical properties of this alloy.
Download or read book Shape Memory and Superelastic Alloys written by K Yamauchi and published by Elsevier. This book was released on 2011-04-30 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory and superelastic alloys possess properties not present in ordinary metals meaning that they can be used for a variety of applications. Shape memory and superelastic alloys: Applications and technologies explores these applications discussing their key features and commercial performance. Readers will gain invaluable information and insight into the current and potential future applications of shape memory alloys.Part one covers the properties and processing of shape memory effect and superelasticity in alloys for practical users with chapters covering the basic characteristics of Ti-Ni-based and Ti-Nb-based shape memory and superelastic (SM/SE) alloys, the development and commercialisation of TiNi and Cu-based alloys, industrial processing and device elements, design of SMA coil springs for actuators before a final overview on the development of SM and SE applications. Part two introduces SMA application technologies with chapters investigating SMAs in electrical applications, hot-water supply, construction and housing, automobiles and railways and aerospace engineering before looking at the properties, processing and applications of Ferrous (Fe)-based SMAs. Part three focuses on the applications of superelastic alloys and explores their functions in the medical, telecommunications, clothing, sports and leisure industries. The appendix briefly describes the history and activity of the Association of Shape Memory Alloys (ASMA).With its distinguished editors and team of expert contributors, Shape memory and superelastic alloys: Applications and technologies is be a valuable reference tool for metallurgists as well as for designers, engineers and students involved in one of the many industries in which shape memory effect and superelasticity are used such as construction, automotive, medical, aerospace, telecommunications, water/heating, clothing, sports and leisure. - Explores important applications of shape memory and superelastic alloys discussing their key features and commercial performance - Assesses the properties and processing of shape memory effect and superelasticity in alloys for practical users with chapters covering the basic characteristics - Introduces SMA application technologies investigating SMAs in electrical applications, hot-water supply, construction and housing, automobiles and railways and aerospace engineering
Download or read book Shape Memory Alloys for Biomedical Applications written by T Yoneyama and published by Elsevier. This book was released on 2008-11-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory alloys are suitable for a wide range of biomedical applications, such as dentistry, bone repair and cardiovascular stents. Shape memory alloys for biomedical applications provides a comprehensive review of the use of shape memory alloys in these and other areas of medicine.Part one discusses fundamental issues with chapters on such topics as mechanical properties, fabrication of materials, the shape memory effect, superelasticity, surface modification and biocompatibility. Part two covers applications of shape memory alloys in areas such as stents and orthodontic devices as well as other applications in the medical and dental fields.With its distinguished editors and international team of contributors, Shape memory alloys for biomedical applications is an essential reference for materials scientists and engineers working in the medical devices industry and in academia. - A comprehensive review of shape memory metals and devices for medical applications - Discusses materials, mechanical properties, surface modification and biocompatibility - Chapters review medical and dental devices using shape memory metals, including stents and orthodontic devices
Download or read book Engineering Aspects of Shape Memory Alloys written by T W Duerig and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Aspects of Shape Memory Alloys provides an understanding of shape memory by defining terms, properties, and applications. It includes tutorials, overviews, and specific design examples—all written with the intention of minimizing the science and maximizing the engineering aspects. Although the individual chapters have been written by many different authors, each one of the best in their fields, the overall tone and intent of the book is not that of a proceedings, but that of a textbook. The book consists of five parts. Part I deals with the mechanism of shape memory and the alloys that exhibit the effect. It also defines many essential terms that will be used in later parts. Part II deals primarily with constrained recovery, but to some extent with free recovery. There is an introductory paper which defines terms and principles, then several specific examples of products based on constrained recovery. Both Parts III and IV deal with actuators. Part III introduces engineering principles while Part IV presents several of the specific examples. Finally, Part V deals with superelasticity, with an introductory paper and then several specific examples of product engineering.
Download or read book Ni free Ti based Shape Memory Alloys written by Hee Young Kim and published by Butterworth-Heinemann. This book was released on 2018-09-17 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ni-free Ti-based Shape Memory Alloys reviews the fundamental issues of biomedical beta-type Ti base shape memory and superelastic alloys, including martensitic transformation, shape memory and superelastic properties, alloy development, thermomechanical treatment and microstructure control, and biocompatibility. Some unique properties, such as large nonlinear elastic behavior and low Young's modulus, observed in metastable Ti alloys are discussed on the basis of phase stability. As it is expected that superelastic Ti alloys will further expand the applications of shape memory alloys within the biomedical field, this book provides a comprehensive review of these new findings in Ti-base shape memory and superelastic alloys. - Includes coverage of phase transformations in titanium alloys - Discusses mechanical properties and alloy development - Presents a review of Ti-based shape alloys and their applications
Download or read book Shape Memory Alloys written by M. Fremond and published by Springer. This book was released on 2014-05-04 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of two chapters. The first chapter deals with the thermomechanical macroscopic theory describing the transformation and deformation behavior of shape memory alloys. The second chapter deals with the extensive and fundamental review of the experimental works which include crystallography, transformations and mechanical characteristics in Ti-Ni, Cu-base and ferrous shape memory alloys.
Download or read book Smart Structures Theory written by Inderjit Chopra and published by Cambridge University Press. This book was released on 2014 with total page 925 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on smart materials and structures, which are also referred to as intelligent, adaptive, active, sensory, and metamorphic. The ultimate goal is to develop biologically inspired multifunctional materials with the capability to adapt their structural characteristics, monitor their health condition, perform self-diagnosis and self-repair, morph their shape, and undergo significant controlled motion.
Download or read book Shape Memory Alloys written by Dimitris C. Lagoudas and published by Springer Science & Business Media. This book was released on 2008-06-05 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a working knowledge of the modeling and engineering applications of shape memory alloys (SMAs), beginning with a rigorous introduction to continuum mechanics and continuum thermodynamics as they relate to the development of SMA modeling.Modern SMAs can recover from large amounts of bending and deformation, and millions of repetitions within recoverable ranges. SMAs are used in the medical industry to create stents, in the dental industry to create dental and orthodontic archwires, and in the aerospace industry to create fluid fittings. The text presents a unified approach to the constitutive modeling of SMAs, including modeling of magnetic and high temperature SMAs.
Download or read book Martensitic Transformation written by Zenji Nishiyama and published by Elsevier. This book was released on 2012-12-02 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Martensitic Transformation examines martensitic transformation based on the known crystallographical data. Topics covered range from the crystallography of martensite to the transformation temperature and rate of martensite formation. The conditions for martensite formation and stabilization of austenite are also discussed, along with the crystallographic theory of martensitic transformations. Comprised of six chapters, this book begins with an introduction to martensite and martensitic transformation, with emphasis on the basic properties of martensite in steels such as carbon steels. The next two chapters deal with the crystallography of martensite and discuss the martensitic transformation behavior of the second-order transition; lattice imperfections in martensite; and close-packed layer structures of martensites produced from ? phase in noble-metal-base alloys. Thermodynamical problems and kinetics are also analysed, together with conditions for the nucleation of martensite and problems concerning stabilization of austenite. The last chapter discusses the theory of the mechanism underlying martensitic transformation. This monograph will be of interest to metallurgists and materials scientists.
Download or read book Design of Shape Memory Alloy SMA Actuators written by Ashwin Rao and published by Springer. This book was released on 2015-05-08 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This short monograph presents an analysis and design methodology for shape memory alloy (SMA) components such as wires, beams, and springs for different applications. The solid-solid, diffusionless phase transformations in thermally responsive SMA allows them to demonstrate unique characteristics like superelasticity and shape memory effects. The combined sensing and actuating capabilities of such materials allows them to provide a system level response by combining multiple functions in a single material system. In SMA, the combined mechanical and thermal loading effects influence the functionality of such materials. The aim of this book is to make the analysis of these materials accessible to designers by developing a "strength of materials" approach to the analysis and design of such SMA components inspired from their various applications with a review of various factors influencing the design process for such materials.
Download or read book Viscoelastic Solids 1998 written by Roderic S. Lakes and published by CRC Press. This book was released on 2017-11-22 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscoelastic Solids covers the mathematical theory of viscoelasticity and physical insights, causal mechanisms, and practical applications. The book: presents a development of the theory, addressing both transient and dynamic aspects as well as emphasizing linear viscoelasticity synthesizes the structure of the theory with the aim of developing physical insight illustrates the methods for the solution of stress analysis problems in viscoelastic objects explores experimental methods for the characterization of viscoelastic materials describes the phenomenology of viscoelasticity in a variety of materials, including polymers, metals, high damping alloys, rock, piezoelectric materials, cellular solids, dense composite materials, and biological materials analyzes high damping and extremely low damping provides the theory of viscoelastic composite materials, including examples of various types of structure and the relationships between structure and mechanical properties contains examples on the use of viscoelastic materials in preventing and alleviating human suffering Viscoelastic Solids also demonstrates the use of viscoelasticity for diverse applications, such as earplugs, gaskets, computer disks, satellite stability, medical diagnosis, injury prevention, vibration abatement, tire performance, sports, spacecraft explosions, and music.
Download or read book Shape Memory Alloy Actuators written by Mohammad H. Elahinia and published by John Wiley & Sons. This book was released on 2016-01-19 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic approach to realizing NiTi shape memory alloy actuation, and is aimed at science and engineering students who would like to develop a better understanding of the behaviors of SMAs, and learn to design, simulate, control, and fabricate these actuators in a systematic approach. Several innovative biomedical applications of SMAs are discussed. These include orthopedic, rehabilitation, assistive, cardiovascular, and surgery devices and tools. To this end unique actuation mechanisms are discussed. These include antagonistic bi-stable shape memory-superelastic actuation, shape memory spring actuation, and multi axial tension-torsion actuation. These actuation mechanisms open new possibilities for creating adaptive structures and biomedical devices by using SMAs.
Download or read book Thin Film Shape Memory Alloys written by Shuichi Miyazaki and published by Cambridge University Press. This book was released on 2009-09-03 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first dedicated book describing the properties, preparation, characterization and device applications of TiNi-based shape memory alloys.
Download or read book Alloying and Processing for Shape Memory Alloys written by S Hussain and published by . This book was released on 2023-10-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alloying and processing techniques play a crucial role in the development of shape memory alloys for high-temperature applications. This book, explores the various alloying and processing strategies employed to improve the mechanical, thermal and thermomechanical properties of Cu Al Ni-based shape memory alloys. This book highlights the significance of grain refiners in enhancing the mechanical properties of the alloys. It also emphasizes the importance of heat treatment techniques such as precipitation hardening, aging, quenching, tempering, annealing, and sintering, to achieve the desired microstructure and crystal structure. The processing techniques employed include casting, extrusion, rolling, forging, powder metallurgy, hot isostatic pressing, mechanical alloying, spark plasma sintering, additive manufacturing, 3D printing, and laser processing. The author also describes the impact of surface engineering, including surface morphology, topography, roughness, energy, and tension, on the interfacial properties of the alloys. The article focuses on the phase transformations occurring in shape memory alloys, such as the martensitic and austenitic transformations, and their relation to the alloy's mechanical and thermal properties. The use of intermetallics, metal-ceramic composites, and nanocomposites in shape memory alloys is also discussed, along with the role of nanoscale grain boundaries, dislocations, and defects in enhancing the alloys' strengthening mechanisms. Furthermore, book highlights the importance of shape memory alloys in applications such as medical devices, aerospace, and robotics, where their unique properties of shape memory, superelasticity, and wear resistance are utilized. The author also discusses the challenges associated with the development and processing of shape memory alloys, such as fatigue, creep, and wear resistance. Overall, the article emphasizes the importance of alloying and processing techniques in the development of shape memory alloys for high-temperature applications. It provides valuable insights into the various strategies employed in the field and highlights the potential of shape memory alloys in various industries.
Download or read book Shape Memory Polymers written by Jinlian Hu and published by Smithers Rapra. This book was released on 2014-05-27 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape-memory polymers (SMP) are a unique branch of the smart materials family which are capable of changing shape on-demand upon exposure to external stimulus. The discovery of SMP made a significant breakthrough in the developments of novel smart materials for a variety of engineering applications, superseded the traditional materials, and also influenced the current methods of product designing. This book provides the latest advanced information of on-going research domains of SMP. This will certainly enlighten the reader to the achievements and tremendous potentials of SMP. The basic fundamentals of SMP, including shape-memory mechanisms and mechanics are described. This will aid reader to become more familiar with SMP and the basic concepts, thus guiding them in undergoing independent research in the SMP field. The book also provides the reader with associated challenges and existing application problems of SMP. This could assist the reader to focus more on these issues and further exploit their knowledge to look for innovative solutions. Future outlooks of SMP research are discussed as well. This book should prove to be extremely useful for academics, R&D managers, researcher scientists, engineers, and all others related to the SMP research.
Download or read book Advances in Electromechanical Technologies written by V. C. Pandey and published by Springer Nature. This book was released on 2020-09-24 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed papers from the International Conference on Emerging Trends in Electromechanical Technologies & Management (TEMT) 2019. The focus is on current research in interdisciplinary areas of mechanical, electrical, electronics and information technologies, and their management from design to market. The book covers a wide range of topics such as computer integrated manufacturing, additive manufacturing, materials science and engineering, simulation and modelling, finite element analysis, operations and supply chain management, decision sciences, business analytics, project management, and sustainable freight transportation. The book will be of interest to researchers and practitioners of various disciplines, in particular mechanical and industrial engineering.
