Download or read book Engineering Materials Technology written by James A. Jacobs and published by Prentice Hall. This book was released on 1985 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Framework for K 12 Science Education written by National Research Council and published by National Academies Press. This book was released on 2012-02-28 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science, engineering, and technology permeate nearly every facet of modern life and hold the key to solving many of humanity's most pressing current and future challenges. The United States' position in the global economy is declining, in part because U.S. workers lack fundamental knowledge in these fields. To address the critical issues of U.S. competitiveness and to better prepare the workforce, A Framework for K-12 Science Education proposes a new approach to K-12 science education that will capture students' interest and provide them with the necessary foundational knowledge in the field. A Framework for K-12 Science Education outlines a broad set of expectations for students in science and engineering in grades K-12. These expectations will inform the development of new standards for K-12 science education and, subsequently, revisions to curriculum, instruction, assessment, and professional development for educators. This book identifies three dimensions that convey the core ideas and practices around which science and engineering education in these grades should be built. These three dimensions are: crosscutting concepts that unify the study of science through their common application across science and engineering; scientific and engineering practices; and disciplinary core ideas in the physical sciences, life sciences, and earth and space sciences and for engineering, technology, and the applications of science. The overarching goal is for all high school graduates to have sufficient knowledge of science and engineering to engage in public discussions on science-related issues, be careful consumers of scientific and technical information, and enter the careers of their choice. A Framework for K-12 Science Education is the first step in a process that can inform state-level decisions and achieve a research-grounded basis for improving science instruction and learning across the country. The book will guide standards developers, teachers, curriculum designers, assessment developers, state and district science administrators, and educators who teach science in informal environments.

Download or read book Mechanical Engineering Technologies and Applications Volume 2 written by Zied Driss and published by Bentham Science Publishers. This book was released on 2023-11-30 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on cases and studies of interest to mechanical engineers and industrial technicians. The considered applications in this volume are widely used in several industrial fields particularly in the automotive and aviation industries. Readers will understand the theory and techniques which are used in each application covered in each chapter. Volume 2 includes the following topics: Numerical investigation of turbulent slot jets with various nanoparticle shapes Experimental study on a sweeping gas membrane distillation unit Development of design processes for multi-spindle drilling using a neural network and expert systems Experimental investigation of a new hybrid solar collector (PV/t) system Theoretical study of the effects of combustion duration on engine performance Effects of preheating temperature and fuel-air equivalence ratio on pollution control in hydrocarbon combustion Numerical study of natural convection between two concentric ellipses with different shapes and imposed temperatures Theoretical study of the geometrical parameters effect on the behavior of a solar chimney power plant Numerical investigations of the effect of packed bed porosity on the flow behavior Comparison between a conventional and a four-stage Savonius wind rotor The presented case studies and development approaches aim to provide readers with basic and applied information broadly related to mechanical engineering and technology.

Download or read book Basic Engineering Technology written by R L Timings and published by Elsevier. This book was released on 2014-05-12 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Engineering Technology covers various topics related to engineering, from safety procedures and movement of loads to measurement and dimensional control. Marking out, workholding, and toolholding are also discussed, along with joining, assembly, and dismantling. The interpretation of technical drawings, specifications, and data is considered as well. Comprised of 10 chapters, this book begins with a historical overview of the development of the engineering industry, followed by a discussion on the academic qualifications and training of the various categories of technical personnel employed in the industry. The reader is then introduced to safe practices observed in the engineering industry, with emphasis on health and safety legislation, causes of accidents, and accident prevention. Subsequent chapters focus on safety considerations in the movement of loads; measurement and control of dimensional properties; advantages and disadvantages of marking out; workholding and toolholding applications; and assembly and dismantling. This monograph is intended for undergraduate students and those enrolled in training centers and in industrial apprentice training schemes.

Download or read book Advanced Technology in Structural Engineering written by Mohamed Elgaaly and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings contains the papers presented at the 2000 Structures Congress & Exposition held on May 8-10, 2000, in Philadelphia, Pennsylvania. The themes include: 14th Analysis & Computational Specialty Conference, Bridges, Buildings, Dynamics/Wind/Seismic, Steel structures, Timber/Composites/Concrete, Practical design & detailing. The goal of the Congress is to cover the advanced technology of structural engineering. Topics range from the latest research developments to practical applications of structural engineering principles.

Download or read book Surface Engineering of Metals written by Tadeusz Burakowski and published by CRC Press. This book was released on 1998-12-23 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Engineering of Metals provides basic definitions of classical and modern surface treatments, addressing mechanisms of formation, microstructure, and properties of surface layers. Part I outlines the fundamentals of surface engineering, presents the history of its development, and proposes a two-category classification of surface layers. Discussions include the basic potential and usable properties of superficial layers and coatings, explaining their concept, interaction with other properties, and the significance of these properties for proper selection and functioning. Part II provides an original classification of the production methods of surface layers. Discussions include the latest technologies in this field, characterized by directional or beam interaction of particles or of the heating medium with the treat surface.

Download or read book Chemical Science and Engineering Technology written by Devrim Balköse and published by CRC Press. This book was released on 2019-03-19 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the major areas of emphasis in the field of in chemical science and engineering technology in recent years has been interdisciplinary research, a trend that promises new insights and innovations rooted in cross-disciplinary collaboration. This volume is designed for stepping beyond traditional disciplinary boundaries and applying knowledge and insights from multiple fields. This book, Chemical Science and Engineering Technology: Perspectives on Interdisciplinary Research, provides a selection of chapters on interdisciplinary research in chemical science and engineering technology, taking a conceptual, and practical approach. The book includes case studies and supporting technologies and also explains the conceptual thinking behind current uses and potential uses not yet implemented. International experts with countless years of experience lend this volume credibility.

Download or read book The Oxford Handbook of Engineering and Technology in the Classical World written by John Peter Oleson and published by Oxford University Press. This book was released on 2008 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nearly every aspect of daily life in the Mediterranean world and Europe during the florescence of the Greek and Roman cultures is relevant to engineering and technology. This text highlights the accomplishments of the ancient societies, the research problems, and stimulates further progress in the history of ancient technology.

Download or read book Engineering Technologies written by Mike Tooley and published by Taylor & Francis. This book was released on 2016-10-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the three mandatory units of the EAL Level 2 Diploma in Engineering and Technology Each compulsory unit is covered in detail with activities, practice exercises and examples where relevant Review questions are provided at the end of each chapter and a sample multiple-choice examination paper is included at the end of the book Contains expert advice that has been written in collaboration with EAL to ensure that it covers what learners need to know Answers to selected questions in the book, together with other supporting resources, can be found at the book’s companion website. Numerical answers are provided in the book itself. Written specifically for the EAL Level 2 Diploma in Engineering and Technology, this book covers the three mandatory units on this course: Engineering Environment Awareness, Engineering Techniques, and Engineering Principles. Within each unit, the Learning Outcomes are covered in detail and the book includes activities and test your knowledge sections to check your understanding. At the end of each chapter is a checklist to make sure you have achieved each objective before you move onto the next section. At www.key2engtech.com, you can download answers to selected questions found within the book, as well as reference material and resources to support several other EAL units. This book is a must have for all learners studying for their EAL Level 2 Diploma award in Engineering and Technology and contains all of the essential knowledge you need to complete this course.

Download or read book Applied Plastics Engineering Handbook written by Myer Kutz and published by William Andrew. This book was released on 2016-09-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Plastics Engineering Handbook: Processing, Materials, and Applications, Second Edition, covers both the polymer basics that are helpful to bring readers quickly up-to-speed if they are not familiar with a particular area of plastics processing and the recent developments that enable practitioners to discover which options best fit their requirements. New chapters added specifically cover polyamides, polyimides, and polyesters. Hot topics such as 3-D printing and smart plastics are also included, giving plastics engineers the information they need to take these embryonic technologies and deploy them in their own work. With the increasing demands for lightness and fuel economy in the automotive industry (not least due to CAFÉ standards), plastics will soon be used even further in vehicles. A new chapter has been added to cover the technology trends in this area, and the book has been substantially updated to reflect advancements in technology, regulations, and the commercialization of plastics in various areas. Recycling of plastics has been thoroughly revised to reflect ongoing developments in sustainability of plastics. Extrusion processing is constantly progressing, as have the elastomeric materials, fillers, and additives which are available. Throughout the book, the focus is on the engineering aspects of producing and using plastics. The properties of plastics are explained, along with techniques for testing, measuring, enhancing, and analyzing them. Practical introductions to both core topics and new developments make this work equally valuable for newly qualified plastics engineers seeking the practical rules-of-thumb they don't teach you in school and experienced practitioners evaluating new technologies or getting up-to-speed in a new field. - Presents an authoritative source of practical advice for engineers, providing guidance from experts that will lead to cost savings and process improvements - Ideal introduction for both new engineers and experienced practitioners entering a new field or evaluating a new technology - Updated to include the latest technology, including 3D Printing, smart polymers, and thorough coverage of biopolymers and biodegradable plastics

Download or read book Engineering Properties of Steel written by Philip D. Harvey and published by ASM International(OH). This book was released on 1982 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensive data on properties of more than 425 steels. Includes carbon steels: 1000, 1100, 1200, and 1500 Series; alloy steels: 1300-9000; high-strength steels: carbon and low alloy; stainless steels and heat-resisting alloys; tool steels; and maraging steels. Provides data on chemical composition, mechanical properties, physical properties, fabrication characteristics, machining data and typical uses of steels. The steels are also cross-referenced to U.S. and foreign standards. Book jacket.

Download or read book The Technological Importance of Accurate Thermophysical Property Information written by J. V. Sengers and published by . This book was released on 1980 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tech Engineering News written by and published by . This book was released on 1920 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Food Process Engineering and Technology written by Zeki Berk and published by Academic Press. This book was released on 2013-06-08 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past 30 years have seen the establishment of food engineering both as an academic discipline and as a profession. Combining scientific depth with practical usefulness, this book serves as a tool for graduate students as well as practicing food engineers, technologists and researchers looking for the latest information on transformation and preservation processes as well as process control and plant hygiene topics. - Strong emphasis on the relationship between engineering and product quality/safety - Links theory and practice - Considers topics in light of factors such as cost and environmental issues

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Technology and Practice in Geotechnical Engineering written by Adeyeri, Joseph B. and published by IGI Global. This book was released on 2014-09-30 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge surrounding the behavior of earth materials is important to a number of industries, including the mining and construction industries. Further research into the field of geotechnical engineering can assist in providing the tools necessary to analyze the condition and properties of the earth. Technology and Practice in Geotechnical Engineering brings together theory and practical application, thus offering a unified and thorough understanding of soil mechanics. Highlighting illustrative examples, technological applications, and theoretical and foundational concepts, this book is a crucial reference source for students, practitioners, contractors, architects, and builders interested in the functions and mechanics of sedimentary materials.

Download or read book 3D Printing Intellectual Property and Innovation written by Rosa Maria Ballardini and published by Kluwer Law International B.V.. This book was released on 2016-04-24 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: 3D printing (or, more correctly, additive manufacturing) is the general term for those software-driven technologies that create physical objects by successive layering of materials. Due to recent advances in the quality of objects produced and to lower processing costs, the increasing dispersion and availability of these technologies have major implications not only for manufacturers and distributors but also for users and consumers, raising unprecedented challenges for intellectual property protection and enforcement. This is the first and only book to discuss 3D printing technology from a multidisciplinary perspective that encompasses law, economics, engineering, technology, and policy. Originating in a collaborative study spearheaded by the Hanken School of Economics, the Aalto University and the University of Helsinki in Finland and engaging an international consortium of legal, design and production engineering experts, with substantial contributions from industrial partners, the book fully exposes and examines the fundamental questions related to the nexus of intellectual property law, emerging technologies, 3D printing, business innovation, and policy issues. Twenty-five legal, technical, and business experts contribute sixteen peer-reviewed chapters, each focusing on a specific area, that collectively evaluate the tensions created by 3D printing technology in the context of the global economy. The topics covered include: • current and future business models for 3D printing applications; • intellectual property rights in 3D printing; • essential patents and technical standards in additive manufacturing; • patent and bioprinting; • private use and 3D printing; • copyright licences on the user-generated content (UGC) in 3D printing; • copyright implications of 3D scanning; and • non-traditional trademark infringement in the 3D printing context. Specific industrial applications – including aeronautics, automotive industries, construction equipment, toy and jewellery making, medical devices, tissue engineering, and regenerative medicine – are all touched upon in the course of analyses. In a legal context, the central focus is on the technology’s implications for US and European intellectual property law, anchored in a comparison of relevant laws and cases in several legal systems. This work is a matchless resource for patent, copyright, and trademark attorneys and other corporate counsel, innovation economists, industrial designers and engineers, and academics and policymakers concerned with this complex topic.