Download or read book Engineering Plasticity And Impact Dynamics Proceedings Of The Intl Symp On Plasticity And Impact Ispi 2001 written by Liangchi Zhang and published by World Scientific. This book was released on 2001-12-11 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity and impact dynamics are two important areas in engineering practice, which includes structural engineering, crashworthiness, metal formation and new structural materials. The application of engineering plasticity and impact dynamics has resulted in significant achievements both technically and economically.This book presents the state-of-the-art developments in the above fields. It contains over 15 chapters written by experts in engineering plasticity and impact dynamics. It covers a wide range of theoretical developments and engineering applications, including fundamentals of energy absorption, applications of new materials, crashworthiness, bifurcation in plasticity, microdynamics, penetration, wave propagation, fracture, laser impact and particle-impact-induced erosion.
Download or read book Engineering Plasticity and Impact Dynamics written by Liangchi Zhang and published by World Scientific. This book was released on 2001 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity and impact dynamics are two important areas in engineering practice, which includes structural engineering, crashworthiness, metal formation and new structural materials. The application of engineering plasticity and impact dynamics has resulted in significant achievements both technically and economically.This book presents the state-of-the-art developments in the above fields. It contains over 15 chapters written by experts in engineering plasticity and impact dynamics. It covers a wide range of theoretical developments and engineering applications, including fundamentals of energy absorption, applications of new materials, crashworthiness, bifurcation in plasticity, microdynamics, penetration, wave propagation, fracture, laser impact and particle-impact-induced erosion.
Download or read book Index of Conference Proceedings written by British Library. Document Supply Centre and published by . This book was released on 2003 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Directory of Published Proceedings written by and published by . This book was released on 2001 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypermedia Openness Structural Awareness and Adaptivity written by Siegfried Reich and published by Springer Science & Business Media. This book was released on 2002-02-20 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the joint post-proceedings of three International Workshops held as part of the 12th ACM Conference on Hypertext and Hypermedia in Aarhus, Denmark in August 2001. The 28 revised full papers presented were carefully refereed and selected during two rounds of reviewing and revision. In accordance with the workshop topics, the papers are organized in sections on open hypermedia systems, structural computing, and adaptive hypermedia.
Download or read book Plastic Bending Theory And Applications written by T X Yu and published by World Scientific. This book was released on 1996-03-20 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the point of view of mechanics, this monograph systematically demonstrates the theory of plastic bending and its engineering applications; most of the contents of the book are based on the authors' research in the past decade. The monograph not only expounds the contributions of the authors to the fundamental theory of plastic bending, but also presents various applications of the theory in sheet metal forming, particularly in the analysis and prediction of springback and wrinkling of strips and plates subjected to bending or stamping. In addition to theoretical modelling, attention has also been paid to the development of related numerical methods; comparisons with experimental results are also presented.
Download or read book Blended Learning Across Disciplines written by Andrew Kitchenham and published by IGI Global. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book presents a global perspective on blended learning and augments that perspective with examples and applications from leading scholars around the world"--Provided by publisher.
Download or read book Solid Mechanics written by Liangchi Zhang and published by Red Globe Press. This book was released on 2001-01-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing the basics of solid mechanics to engineers from a practical point of view, this book presents the theory of solid mechanics, solution methodology and direct engineering applications as an organic whole.
Download or read book Precision Machining of Advanced Materials written by Liangchi Zhang and published by . This book was released on 2001 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Precision machining is an essential manufacturing process to achieve high dimensional accuracy and high surface integrity of functional components for various technological applications, such as those in aeronautical, biomedical, mechanical, metrological, mechatronic, nano-technological and microscopy industries. To achieve a satisfactory operation of precision machining, however, one must have a deep understanding of the setting and control of machining conditions, mechanisms of material removal and effectiveness of the cutting tools. As a result, a quality precision machining requires a comprehensive integration of the development of machine tools, the improvement of machining methods and the wise application of materials science and engineering and mechanics of solids. recent research, development and applications on the precision machining of advanced materials. It covers three major aspects of precision machining, i.e., mechanisms of machining and material removal, friction and wear problems associated with cutting tools and development of new methods and new tools for more cost-effective processes. machining methods and conditions to achieve high surface integrity and accuracy. For example, silicon monocrystalls are brittle in nature and are chemically sensitive to machining environment. Composites have at least two phases with different mechanical properties. These need to be considered carefully in machining as otherwise unacceptable damage will take place in either the workpiece or the cutting tool or in both. The papers included in this volume deal with a wide range of difficult-to-machine materials, such as silicon, glass, carbon-fibre reinforced composites, CVD-SiC film and ceramics. The methodologies presented address both industrial production problems and fundamental issues, including polishing, grinding, electrochemical discharge machining, abrasive jet machining, laser sintering, chemo- mechanical machining, drilling, fractal analysis, molecular dynamics analysis and finite element simulation. The volume should therefore be of interest to production and research engineers, research students and academics in the area.
Download or read book Auditory Prostheses written by Fan-Gang Zeng and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cochlear implants are currently the standard treatment for profound sensorineural hearing loss. In the last decade, advances in auditory science and technology have not only greatly expanded the utility of electric stimulation to other parts of the auditory nervous system in addition to the cochlea, but have also demonstrated drastic changes in the brain in responses to electric stimulation, including changes in language development and music perception. Volume 20 of SHAR focused on basic science and technology underlying the cochlear implant. However, due to the newness of the ideas and technology, the volume did not cover any emerging applications such as bilateral cochlear implants, combined acoustic-electric stimulation, and other types of auditory prostheses, nor did it review brain plasticity in responses to electric stimulation and its perceptual and language consequences. This proposed volume takes off from Volume 20, and expands the examination of implants into new and highly exciting areas. This edited book starts with an overview and introduction by Dr. Fan-Gang Zeng. Chapters 2-9 cover technological development and the advances in treating the full spectrum of ear disorders in the last ten years. Chapters 10-15 discuss brain responses to electric stimulation and their perceptual impact. This volume is particularly exciting because there have been quantum leap from the traditional technology discussed in Volume 20. Thus, this volume is timely and will be of real importance to the SHAR audience.
Download or read book Hippocampal Microcircuits written by Vassilis Cutsuridis and published by Springer Science & Business Media. This book was released on 2010-02-01 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rich in detail, Hippocampal Microcircuits: A Computational Modeler’s Resource Book provides succinct and focused reviews of experimental results. It is an unparalleled resource of data and methodology that will be invaluable to anyone wishing to develop computational models of the microcircuits of the hippocampus. The editors have divided the material into two thematic areas. Covering the subject’s experimental background, leading neuroscientists discuss the morphological, physiological and molecular characteristics as well as the connectivity and synaptic properties of the various cell types found in the hippocampus. Here, ensemble activity, related to behavior, on the part of morphologically identified neurons in anesthetized and freely moving animals, lead to insights into the functions of hippocampal areas. In the second section, on computational analysis, computational neuroscientists present models of hippocampal microcircuits at various levels of detail, including single-cell and network levels. A full chapter is devoted to the single-neuron and network simulation environments currently used by computational neuroscientists in developing their models. In addition to the above, the chapters also identify outstanding questions and areas in need of further clarification that will guide future research by computational neuroscientists.
Download or read book Cablebolting in Underground Mines written by Douglas Jean Hutchinson and published by . This book was released on 1996 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Congress on Polymers in Concrete ICPIC 2018 written by Mahmoud M. Reda Taha and published by Springer. This book was released on 2018-04-06 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects the proceedings from the International Congress of Polymers in Concrete 2018 (ICPIC), held under the theme “Polymers for Resilient and Sustainable Concrete Infrastructure.” ICPIC 2018 provides an opportunity for researchers and specialists working in the fields of polymers to exchange ideas and follow the latest progress in the use of polymers in concrete infrastructure. It also showcases the use of polymers and polymer concrete in sustainable and resilient development, and provides a platform for local and overseas suppliers, developers, manufacturers and contractors using polymers, polymer concrete and polymer composites in concrete structures to develop new business opportunities and follow the latest developments in the field. The International Congress of Polymers in Concrete is an international forum that has taken place every three years for the last 40 years with the objective of following progress in the field of polymers and their use in concrete and construction. Following 15 successful congresses held in London (1975), Austin (1978), Koriyama (1981), Darmstadt (1984), Brighton (1987), Shanghai (1990), Moscow (1992), Oostende (1995), Bologna (1998), Honolulu (2001), Berlin (2004), Chuncheon (2007), Funchal (2010), Shanghai (2013) and Singapore (2015), the 16th ICPIC will take place in Washington, DC, from April 29 to May 1st, 2018.
Download or read book Christian Spirituality written by Jill Raitt and published by Taylor & Francis. This book was released on 1987 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Problem with Pleasure written by Laura Frost and published by Columbia University Press. This book was released on 2013-07-16 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revealing study of the sensual tensions powering the period's formal and ideological innovations.
Download or read book The House in Amalfi written by Elizabeth Adler and published by Macmillan. This book was released on 2005-08 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Struggling with painful truths about the husband she lost two years earlier, landscape architect Lamour Harrington returns to her coastal childhood home, where she discovers dangerous secrets, two mysterious men, and a renewed sense of courage.
Download or read book Low density cellular plastics written by N.C. Hilyard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Foams are gas filled integral structures in which the gas is finely dispersed throughout acontinuouslyconnected solid phase. The bulk density is usually substantially lower than that of the solid component, and for the foams which form the focus for this book the volume fraction of the gas phase is considerably greater than 0.5 and in most instances in excess of 0.9. Many ofthe materials encountered in every day experience, such as bread, plants and trees, structural materials for buildings, comfort materials for domestic and automotive seating, shock absorbers or car bumpers and materials for noise control, have one thing in common - the cellular nature of their physical structure. Whyare thesestructuressoimportantin the naturaland man-made world? The reasons are both technical and commercial. From a technical viewpoint cellular materials offer: 1. high specific stiffness and strength - making them suitable for structural applications; 2. closeto idealenergymanagement - hencetheir useinthermalandacoustic insulation, vibration damping, acoustic absorption and shock mitigation; and 3. comfort - hence their use for domestic and automotive seating.
