Download or read book Engineering Magnetic Dielectric and Microwave Properties of Ceramics and Alloys written by Charanjeet Singh and published by Materials Research Forum LLC. This book was released on 2019-10-25 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: New research on the magnetic, dielectric and microwave properties of promising materials for domestic, industrial, military and medical applications are presented, with focus on biomaterials, ferrites, Ni-Fe alloys, capacitors, multiferroics, microwave absorbers and perovskite materials. Special emphasis is placed on bioceramics for orthopedic applications; classification of biomaterials; bioactive glass systems; preparation, properties and applications of PbFe12O19 hexaferrites; Ni-Fe alloys for shielding electronic devices from external magnetostatic fields; the role of multiferroics in spintronics field; design of microwave absorbers and absorption characteristics of ceramics.
Download or read book Microwave Materials and Applications written by Mailadil T. Sebastian and published by John Wiley & Sons. This book was released on 2017-03-02 with total page 997 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die jüngsten Fortschritte im Bereich der drahtlosen Telekommunikation und dem Internet der Dinge sorgen bei drahtlosen Systemen, beim Satellitenfernsehen und bei intelligenten Transportsystemen der 5. Generation für eine höhere Nachfrage nach dielektrischen Materialien und modernen Fertigungstechniken. Diese Materialien bieten ausgezeichnete elektrische, dielektrische und thermische Eigenschaften und verfügen über enormes Potenzial, vor allem bei der drahtlosen Kommunikation, bei flexibler Elektronik und gedruckter Elektronik. Microwave Materials and Applications erläutert die herkömmlichen Methoden zur Messung der dielektrischen Eigenschaften im Mikrowellenbereich, die verschiedenen Ansätze zur Lösung von Problemen der Materialchemie und von Kristallstrukturen, in den Bereichen Doping, Substitution und Aufbau von Verbundwerkstoffen. Besonderer Schwerpunkt liegt auf Verarbeitungstechniken, Einflüssen der Morphologie und der Anwendung von Materialien in der Mikrowellentechnik. Gleichzeitig werden viele der jüngsten Forschungserkenntnisse bei Mikrowellen-Dielektrika und -Anwendungen zusammengefasst. Die verschiedenen Kapitel untersuchen: Oxidkeramiken für dielektrische Resonatoren und Substrate, HTCC-, LTCC- und ULTCC-Bänder für Substrate, Polymer-Keramik-Verbundstoffe für Leiterplatten, Elastomer-Keramik-Verbundstoffe für flexible Elektronik, dielektrische Tinten, Materialien für die EMV-Abschirmung, Mikrowellen-Ferrite. Ein umfassender Anhang präsentiert die grundlegenden Eigenschaften von mehr als 4000 verlustarmen dielektrischen Keramiken, deren Zusammensetzung, kristalline Struktur und dielektrischen Eigenschaften für Mikrowellenanwendungen. Microwave Materials and Applications wirft einen Blick auf sämtliche Aspekte von Mikrowellenmaterialien und -anwendungen, ein nützliches Handbuch für Wissenschaftler, Unternehmen, Ingenieure und Studenten, die sich mit heutigen und neuen Anwendungen in den Bereichen drahtlose Kommunikation und Unterhaltungselektronik beschäftigen.
Download or read book Advances in Energy Resources and Environmental Engineering written by Abdelfatah Abomohra and published by Springer Nature. This book was released on with total page 1733 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Dielectric and Thermal Properties of Materials at Microwave Frequencies written by Vyacheslav V. Komarov and published by Artech House. This book was released on 2012 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of microwave energy for thermal processing of different materials and substances is a rapidly growing trend in modern science and engineering. In fact, optimal design work involving microwaves is impossible without solid knowledge of the properties of these materials. Heres a practical reference that collects essential data on the dielectric and thermal properties of microwaveable materials, saving you countless hours on projects in a wide range of areas, including microwave design and heating, applied electrodynamics, food science, and medical technology. This unique book provides hard-to-find information on complex dielectric permittivity of media at industrial, scientific, and medical frequencies (430 MHz, 915MHz, 2.45GHz, 5.8 GHz, and 24.125GHz). Written by a leading expert in the field, this authoritative book does an exceptional job at presenting critical data on various materials and explaining what their key characteristics are concerning microwaves.
Download or read book Temperature and Frequency Dependence of Complex Permittivity in Metal Oxide Dielectrics Theory Modelling and Measurement written by Jonathan Breeze and published by Springer. This book was released on 2016-09-08 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis investigates the dielectric properties of metal-oxide ceramics at microwave frequencies. It also demonstrates for the first time that a theory of harmonic phonon coupling can effectively predict the complex permittivity of metal oxides as a function of temperature and frequency. Dielectric ceramics are an important class of materials for radio-frequency, microwave and emergent terahertz technologies. Their key property is complex permittivity, the real part of which permits the miniaturisation of devices and the imaginary part of which is responsible for the absorption of electromagnetic energy. Absorption limits the practical performance of many microwave devices such as filters, oscillators, passive circuits and antennas. Complex permittivity as a function of temperature for low-loss dielectrics is determined by measuring the resonant frequency of dielectric resonators and using the radial mode matching technique to extract the dielectric properties. There have been only a handful of publications on the theory of dielectric loss, and their predictions have often been unfortunately unsatisfactory when compared to measurements of real crystals, sometimes differing by whole orders of magnitude. The main reason for this is the lack of accurate data for a harmonic coupling coefficient and phonon eigenfrequencies at arbitrary q vectors in the Brillouin zone. Here, a quantum field theory of losses in dielectrics is applied, using results from density functional perturbation theory, to predict from first principles the complex permittivity of metal oxides as functions of frequency and temperature.
Download or read book Magnetic Properties of Rapidly solidified Metallic and Ceramic Alloys written by Laura Jo Henderson and published by . This book was released on 1988 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technical Abstract Bulletin written by Defense Documentation Center (U.S.) and published by . This book was released on 1963 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dielectrics in Electric Fields written by Gorur Govinda Raju and published by CRC Press. This book was released on 2017-07-28 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dielectrics in Electric Fields explores the influence of electric fields on dielectric—i.e., non-conducting or insulating—materials, examining the distinctive behaviors of these materials through well-established principles of physics and engineering. Featuring five new chapters, nearly 200 new figures, and more than 800 new citations, this fully updated and significantly expanded Second Edition: Analyzes inorganic substances with real-life applications in harsh working conditions such as outdoor, nuclear, and space environments Introduces methods for measuring dielectric properties at microwave frequencies, presenting results obtained for specific materials Discusses the application of dielectric theory in allied fields such as corrosion studies, civil engineering, and health sciences Combines in one chapter coverage of electrical breakdown in gases with breakdown in micrometric gaps Offers extensive coverage of electron energy distribution—essential knowledge required for the application of plasma sciences in medical science Delivers a detailed review of breakdown in liquids, along with an overview of electron mobility, providing a clear understanding of breakdown phenomena Explains breakdown in solid dielectrics such as single crystals, polycrystalline and amorphous states, thin films, and powders compressed to form pellets Addresses the latest advances in dielectric theory and research, including cutting-edge nanodielectric materials and their practical applications Blends early classical papers that laid the foundation for much of the dielectric theory with more recent work The author has drawn from more than 55 years of research studies and experience in the areas of high-voltage engineering, power systems, and dielectric materials and systems to supply both aspiring and practicing engineers with a comprehensive, authoritative source for up-to-date information on dielectrics in electric fields.
Download or read book Drying Roasting and Calcining of Minerals written by Thomas Battle and published by Springer. This book was released on 2016-12-01 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume give the reader focused information on the important extractive metallurgy unit operations of drying, roasting, and calcining
Download or read book Advanced Sensor and Detection Materials written by Ashutosh Tiwari and published by John Wiley & Sons. This book was released on 2014-06-09 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents a comprehensive and interdisciplinary review of the major cutting-edge technology research areas—especially those on new materials and methods as well as advanced structures and properties—for various sensor and detection devices The development of sensors and detectors at macroscopic or nanometric scale is the driving force stimulating research in sensing materials and technology for accurate detection in solid, liquid, or gas phases; contact or non-contact configurations; or multiple sensing. The emphasis on reduced-scale detection techniques requires the use of new materials and methods. These techniques offer appealing perspectives given by spin crossover organic, inorganic, and composite materials that could be unique for sensor fabrication. The influence of the length, composition, and conformation structure of materials on their properties, and the possibility of adjusting sensing properties by doping or adding the side-groups, are indicative of the starting point of multifarious sensing. The role of intermolecular interactions, polymer and ordered phase formation, as well as behavior under pressure and magnetic and electric fields are also important facts for processing ultra-sensing materials. The 15 chapters written by senior researchers in Advanced Sensor and Detection Materials cover all these subjects and key features under three foci: 1) principals and perspectives, 2) new materials and methods, and 3) advanced structures and properties for various sensor devices.
Download or read book Magnetic Ceramics written by Raul Valenzuela and published by Cambridge University Press. This book was released on 1994-09-15 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Ceramics describes the structure, preparation techniques, magnetic properties and applications of iron-based oxides also known as ferrites; metallic magnetic materials are also covered in depth. The main purpose of the book is to provide an up-to-date overview of the relevant aspects of ferrites, which cover a wide range of magnetic properties and applications such as high-frequency transformer cores, permanent magnet cements, microwave telecommunication devices, magnetic recording media and heads. The approach is that of materials science, characteristically interdisciplinary, where chemical aspects are covered in terms of synthesis/fabrication methods and crystal structures, and physics is introduced to provide a theoretical basis to magnetic properties. A special emphasis is given to the relationship between microstructure and properties.
Download or read book Issues in Materials and Manufacturing Research 2011 Edition written by and published by ScholarlyEditions. This book was released on 2012-01-09 with total page 7150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Materials and Manufacturing Research: 2011 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Materials and Manufacturing Research. The editors have built Issues in Materials and Manufacturing Research: 2011 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Materials and Manufacturing Research in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Materials and Manufacturing Research: 2011 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Microwave Absorbing Materials written by Yuping Duan and published by CRC Press. This book was released on 2016-10-14 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the phenomenal development of electromagnetic wave communication devices and stealth technology, electromagnetic wave absorbing materials have been attracting attention as antielectromagnetic interference slabs, stealth materials, self-concealing technology, and microwave darkrooms. This book starts with the fundamental theory of electromagnetic wave absorption in loss medium space, followed by a discussion of different microwave absorbents, such as manganese dioxide, iron-based composite powder, conductive polyaniline, barium titanate powder, and manganese nitride. Then, structural absorbing materials are explored, including multilayer materials, new discrete absorbers, microwave absorption coatings, cement-based materials, and structural pyramid materials. Many of the graphics demonstrate not only the principles of physics and experimental results but also the methodology of computing. The book will be useful for graduate students of materials science and engineering, physics, chemistry, and electrical and electronic engineering; researchers in the fields of electromagnetic functional materials and nanoscience; and engineers in the fields of electromagnetic compatibility and stealth design.
Download or read book Metals Advances in Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 1893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metals—Advances in Research and Application: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Metals. The editors have built Metals—Advances in Research and Application: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Metals in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Metals—Advances in Research and Application: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Ceramic Materials for Electronics written by Relva C. Buchanan and published by CRC Press. This book was released on 2018-10-08 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Third Edition of Ceramic Materials for Electronics studies a wide range of ceramic materials, including insulators, conductors, piezoelectrics, and ferroelectrics, through detailed discussion of their properties, characterization, fabrication, and applications in electronics. The author summarizes the latest trends and advancements in the field, and explores important topics such as ceramic thin film, functional device technology, and thick film technology. Edited by a leading expert on the subject, this new edition includes more than 150 pages of new information; restructured reference materials, figures, and tables; as well as additional device application-oriented segments.
Download or read book Electromagnetic Wave Absorption and Shielding Materials written by Wei Lu and published by CRC Press. This book was released on 2024-07-12 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reveals the latest research findings and innovations in electromagnetic wave absorption and shielding by exploring the design and application of absorbent materials, the optimization of shielding structures and the improvement of testing and evaluation methods. From conductive materials to magnetic materials, and composite materials to nanomaterials, Electromagnetic Wave Absorption and Shielding Materials details the characteristics and advantages of various absorbent materials and explains their applications in electromagnetic wave absorption and shielding. It then introduces the different methods of electromagnetic shielding, including structural shielding and material shielding. The book also studies experimental and testing techniques, including measurement methods and evaluation criteria for electromagnetic wave absorption performance. The book will be of interest to researchers and graduate students in electromagnetic compatibility, materials science and engineering.
Download or read book Advances in Ceramics written by Costas Sikalidis and published by BoD – Books on Demand. This book was released on 2011-09-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current book consists of twenty-four chapters divided into three sections. Section I includes fourteen chapters in electric and magnetic ceramics which deal with modern specific research on dielectrics and their applications, on nanodielectrics, on piezoceramics, on glass ceramics with para-, anti- or ferro-electric active phases, of varistors ceramics and magnetic ceramics. Section II includes seven chapters in bioceramics which include review information and research results/data on biocompatibility, on medical applications of alumina, zirconia, silicon nitride, ZrO2, bioglass, apatite-wollastonite glass ceramic and b-tri-calcium phosphate. Section III includes three chapters in applications of ceramics in environmental improvement and protection, in water cleaning, in metal bearing wastes stabilization and in utilization of wastes from ceramic industry in concrete and concrete products.
