Download or read book Environmental and Engineering Geophysics written by P. Vallabh Sharma and published by Cambridge University Press. This book was released on 1997-11-20 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This advanced undergraduate textbook comprehensively describes principal geophysical surveying techniques for environmental and engineering problems.
Download or read book Engineering Geophysics written by Anna Bondo Medhus and published by CRC Press. This book was released on 2022-11-30 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Geophysics connects onshore geotechnical engineering challenges to the geophysical methods that may be applied to solve them. Unknown geological conditions are a risk in construction projects, and geophysical information can help to identify those risks. The book answers questions on how, why, and when the individual and combined methods provide the results requested. Flowcharts guide the reader to geophysical methods that can be applied for various engineering challenges, and the solutions are illustrated with practical case histories. The book is intended mainly for geotechnical engineers and geologists but also for geophysicists or managers in need of an overview or brushup on geophysical methods and their practical applications. In addition, it can be used by educational institutions in courses both for geotechnical engineers and geologists.
Download or read book Applied Geophysics in Hydrogeological and Engineering Practice written by W.E. Kelly and published by Elsevier. This book was released on 1993-01-28 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering geology and hydrogeology are applied sciences which utilize other applied sciences such as geophysics to solve practical problems. The book is written in the monograph format with seven chapters. The first chapter introduces the engineering and hydrogeological tasks to be discussed in the book. Relations between the physical, geomechanical and hydrogeological parameters are discussed in chapters three and five. Methods for field measurements and interpretation of field data are discussed in chapters four and six. Some special methods not routinely used in current practice are discussed in chapter seven. To illustrate and analyze the various applications, the authors have drawn from the extensive literature including many studies not previously described in english texts. Theoretical analyzes are supplemented by numerous examples. This book is addressed to university students of geology especially engineering geology and hydrogeology, geophysics and earth sciences, and post graduate, reseachers, and practising engineering geologists, geotechnical engineers, and hydrogeologists.
Download or read book Geophysics in Engineering Investigations written by P. W. McDowell and published by . This book was released on 2002 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The full potential of geophysics in engineering investigations is still to be realised. The many available techniques can provide important information about the ground, its mass properties, its small-scale variations, and its anomalies of structure or content. The advantage of a geophysical survey is that it enables information to be obtained for large volumes of ground that cannot be investigated by direct methods due to cost. The applications of geophysics in the characterisation of contaminated land are still developing, but have great potential for example in the distribution and migration of pollutants in the ground and groundwater. Geophysics is still insufficiently or inappropriately used in engineering and the newer capabilities are not appreciated, so there is a need for up-to-date guidance about how to apply geophysical investigations.This report is published in co-operation with the Geological Society and presents a logical guide through the process of using geophysical investigation methods in site characterisation. It explores the roles of geophysical methods and provides the background to geophysics as an investigative tool. The procurement, management and reporting frameworks for a geophysical investigation are set out, and the importance of the involvement of a recognised geophysics specialist adviser with the work is emphasised. The report explains the need for a conceptual ground model to enable appropriate investigative methods to be chosen. The underlying science and current practices of the main techniques are explained as well as the processes of data acquisition, handling and presentation. The different targets determinable by geophysical methods are considered in separate sections for geological, geotechnical, geo-environmental and structural engineering applications. The report concludes with recommendations for practice. The guide is aimed at geotechnical and civil engineers, geologists and engineering geologists, specialist geophysics contractors, contractors, consultants and clients.
Download or read book Technology and Application of Environmental and Engineering Geophysics written by Qingyun Di and published by Springer. This book was released on 2017-03-30 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on essential theories, methods and techniques in the field of environmental and engineering geophysics that can contribute to resource detection and environmental protection. Geophysics has been playing an important role in exploring the earth, locating vital resources and promoting the development of society. This book covers a range of topics including the exploration of modern resources, such as ore deposits, coal mines, shale gas and geothermal power, and the monitoring of geological disasters, including the rock-soil body, ground deformation, mines, specific rock-soil engineering disasters, desertification of land and environmental abnormalities. This book not only offers a valuable resource for geophysical researchers; it also demonstrates how geophysics theories and methods can be practically implemented to protect our environment and promote the development of human society.
Download or read book Applied Geophysics with Case Studies on Environmental Exploration and Engineering Geophysics written by Ali Ismet Kanlı and published by BoD – Books on Demand. This book was released on 2019-06-05 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a general introduction to the most important methods of applied geophysics with a variety of case studies. These methods represent a primary tool for investigation of the subsurface and are applicable to a very wide range of problems. Applied geophysics is based on physics principles that collect and interpret data on subsurface conditions for practical purposes, including oil and gas exploration, mineral prospecting, geothermal exploration, groundwater exploration, engineering applications, archeological interests, and environmental concerns. The depth of investigation into applied geophysics is shallow, typically from the ground surface to several kilometers deep, where economic, cultural, engineering, or environmental concerns often arise. Applied geophysics uses almost all of the current geophysical methods, including electrical, magnetic, electromagnetic, gravimetric, geothermal, seismic, seismoelectric, magnetotelluric, nuclear, and radioactive methods. In applied geophysics, geophysicists are usually required to have a good understanding of math and physics principles, knowledge of geology and computer skills, and hands-on experience of electronic instruments. A geophysicist's routine job includes survey designs, data acquisition, data processing, and data interpretation with detailed explanation of the study. Applied geophysics consists of three main subject and interest areas, which are exploration geophysics, engineering geophysics, and environmental geophysics.
Download or read book Applied Geophysics for Geologists and Engineers written by D. H. Griffiths and published by Elsevier. This book was released on 2013-10-22 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamentals of all currently used methods (seismic, electrical, electromagnetic, gravity, magnetic, borehole logging and remote sensing) and pays special attention to the seismic refraction and electrical resistivity techniques which are the ones most commonly used in engineering and groundwater geophysics. The main changes in this new edition of Applied Geophysics for Engineers and Geologists, apart from a general updating, and conversion to SI units, is a more extensive treatment of electromagnetic and induced polarisation methods, and of geophysical borehole logging. The seismic reflection method is also treated more fully in view of its great importance in petroleum prospecting. Problems, with answers are also included. Taken together, the changes are so great that this is virtually a new book, as is suggested by the change in title
Download or read book Geophysics for Petroleum Engineers written by Fred Aminzadeh and published by Newnes. This book was released on 2013-12-09 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geophysics for Petroleum Engineers focuses on the applications of geophysics in addressing petroleum engineering problems. It explores the complementary features of geophysical techniques in better understanding, characterizing, producing and monitoring reservoirs. This book introduces engineers to geophysical methods so that they can communicate with geophysicist colleagues and appreciate the benefits of their work. These chapters describe fundamentals of geophysical techniques, their physical bases, their applications and limitations, as well as possible pitfalls in their misuse. Case study examples illustrate the integration of geophysical data with various other data types for predicting and describing reservoir rocks and fluid properties. The examples come from all over the world, with several case histories from the fields in the Middle East. Introduces geophysical methods to engineers Helps understanding, characterizing, producing and monitoring of geophysical techniques Updates the changing needs of reservoir engineering
Download or read book Use of Geophysics for Transportation Projects written by Phil C. Sirles and published by Transportation Research Board. This book was released on 2006 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction -- Geophysical methods -- Information sources and general responses -- Agency practice-Methods and applications -- Agency practice-budgeting, costs, and contracting -- Agency project experience -- Conclusions and future research needs -- Glossary -- References -- Topical bibliography -- Appendices.
Download or read book Engineering Seismology written by Özdoğan Yilmaz and published by . This book was released on 2015 with total page 954 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of engineering seismology includes geotechnical site investigations for buildings and engineering infrastructures, such as dams, levees, bridges, and tunnels, landslide and active-fault investigations, seismic microzonation, and geophysical investigations of historic buildings. These projects require multidisciplinary participation by the geologist, geophysicist, and geotechnical and earthquake engineers. A key objective of this book (SEG Investigations in Geophysics Series No. 17) by Öz Yilmaz is to encourage the specialists from these disciplines to apply the seismic method to solve the many challenging engineering problems they face. The broader scope of engineering seismology also includes exploration of earth resources, including groundwater exploration, coal and mineral exploration, and geothermal exploration. While focusing on the application of the seismic method to geotechnical site investigations, this book includes many case studies in all of the applications of engineering seismology.
Download or read book Detection of Subsurface Cavities written by Edward R. Bates and published by . This book was released on 1973 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research has been in progress since July 1970 to determine which geophysical and remote-sensing methods offer the most promising results for detecting subsurface cavities and what might be done to further develop them. Through extensive field tests, it has been determined that none of the standard electrical resistivity procedures give consistently good results. As a result of the initial field testing, a new process of data interpretation has been developed for one specific electrode configuration. Cavities less than 10 feet in diameter and at the depths greater than 100 feet were located. Research is continuing to adapt this process for locating water- or mud-filled cavities.
Download or read book Near surface Geophysics written by Dwain K. Butler and published by SEG Books. This book was released on 2005 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part 1, "fundamentals", includes magnetic and electrical methods, subsurface geophysics, near-surface seismology, electromagnetic induction, and ground-penetrating radar. Part 2, "applications", includes determination of physical properties, multimethod surveys and integrated interpretations, and model-based survey planning, execution, and interpretation.
Download or read book Geophysics for the Mineral Exploration Geoscientist written by Michael Dentith and published by Cambridge University Press. This book was released on 2014-04-24 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a balance between principles and practice, this state-of-the-art overview of geophysical methods takes readers from the basic physical phenomena, through the acquisition and processing of data, to the creation of geological models of the subsurface and data interpretation to find hidden mineral deposits. Detailed descriptions of all the commonly used geophysical methods are given, including gravity, magnetic, radiometric, electrical, electromagnetic and seismic methods. Each technique is described in a consistent way and without complex mathematics. Emphasising extraction of maximum geological information from geophysical data, the book also explains petrophysics, data modelling and common interpretation pitfalls. Packed with full-colour figures, also available online, the text is supported by selected examples from around the world, including all the major deposit types. Designed for advanced undergraduate and graduate courses in minerals geoscience, this is also a valuable reference for professionals in the mining industry wishing to make greater use of geophysical methods. In 2015, Dentith and Mudge won the ASEG Lindsay Ingall Memorial Award for their combined effort in promoting geophysics to the wider community with the publication of this title.
Download or read book An Introduction to Applied and Environmental Geophysics written by John M. Reynolds and published by John Wiley & Sons. This book was released on 2011-07-07 with total page 1249 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Applied and Environmental Geophysics, 2nd Edition, describes the rapidly developing field of near-surface geophysics. The book covers a range of applications including mineral, hydrocarbon and groundwater exploration, and emphasises the use of geophysics in civil engineering and in environmental investigations. Following on from the international popularity of the first edition, this new, revised, and much expanded edition contains additional case histories, and descriptions of geophysical techniques not previously included in such textbooks. The level of mathematics and physics is deliberately kept to a minimum but is described qualitatively within the text. Relevant mathematical expressions are separated into boxes to supplement the text. The book is profusely illustrated with many figures, photographs and line drawings, many never previously published. Key source literature is provided in an extensive reference section; a list of web addresses for key organisations is also given in an appendix as a valuable additional resource. Covers new techniques such as Magnetic Resonance Sounding, Controlled- Source EM, shear-wave seismic refraction, and airborne gravity and EM techniques Now includes radioactivity surveying and more discussions of down-hole geophysical methods; hydrographic and Sub-Bottom Profiling surveying; and UneXploded Ordnance detection Expanded to include more forensic, archaeological, glaciological, agricultural and bio-geophysical applications Includes more information on physio-chemical properties of geological, engineering and environmental materials Takes a fully global approach Companion website with additional resources available at www.wiley.com/go/reynolds/introduction2e Accessible core textbook for undergraduates as well as an ideal reference for industry professionals The second edition is ideal for students wanting a broad introduction to the subject and is also designed for practising civil and geotechnical engineers, geologists, archaeologists and environmental scientists who need an overview of modern geophysical methods relevant to their discipline. While the first edition was the first textbook to provide such a comprehensive coverage of environmental geophysics, the second edition is even more far ranging in terms of techniques, applications and case histories.
Download or read book Innovation in Near Surface Geophysics written by Raffaele Persico and published by Elsevier. This book was released on 2018-10-05 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation in Near-Surface Geophysics: Instrumentation, Application, and Data Processing Methods offers an advanced look at state-of-the-art and innovative technologies for near surface geophysics, exposing the latest, most effective techniques in an accessible way. By addressing a variety of geophysical applications, including cultural heritage, civil engineering, characteristics of soil, and others, the book provides an understanding of the best products and methodologies modern near surface geophysics has to offer. It proposes tips for new ideas and projects, and encourages collaboration across disciplines and techniques for the best implementation and results. Clearly organized, with contributions from leaders from throughout geophysics, Innovation in Near-Surface Geophysics is an important guide for geophysicists who hope to gain a better understanding of the tools and techniques available. Addresses a variety of applications in near-surface geophysics, including cultural heritage, civil engineering, soil analysis, etc. Provides insight to available products and techniques and offers suggestions for future developments Clearly organized by techniques and their applications
Download or read book Journal of Environmental Engineering Geophysics written by and published by . This book was released on 1998 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental and Engineering Geophysics written by Prem V. Sharma and published by Cambridge University Press. This book was released on 1997-11-20 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geophysical imaging methods provide solutions to a wide variety of environmental and engineering problems: protection of soil and groundwater from contamination; disposal of chemical and nuclear waste; geotechnical site testing; landslide and ground subsidence hazard detection; location of archaeological artifacts. This book comprehensively describes the theory, data acquisition and interpretation of all of the principal techniques of geophysical surveying: gravity, magnetic, seismic, self-potential, resistivity, induced polarization, electromagnetic, ground-probing radar, radioactivity, geothermal, and geophysical borehole logging. Each chapter is supported by a large number of richly illustrated case histories. This book will prove to be a valuable textbook for senior undergraduates and postgraduates in environmental and applied geophysics, a supplementary course book for students of geology, engineering geophysics, civil and mining engineering, and a reference work for professional earth scientists, engineers and town planners.