Download or read book Guidelines for Engineering Design for Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2012-04-10 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated version of one of the most popular and widely used CCPS books provides plant design engineers, facility operators, and safety professionals with key information on selected topics of interest. The book focuses on process safety issues in the design of chemical, petrochemical, and hydrocarbon processing facilities. It discusses how to select designs that can prevent or mitigate the release of flammable or toxic materials, which could lead to a fire, explosion, or environmental damage. Key areas to be enhanced in the new edition include inherently safer design, specifically concepts for design of inherently safer unit operations and Safety Instrumented Systems and Layer of Protection Analysis. This book also provides an extensive bibliography to related publications and topic-specific information, as well as key information on failure modes and potential design solutions.
Download or read book Facilities Engineering and Management Handbook written by Paul Richard Smith and published by McGraw-Hill Professional Publishing. This book was released on 2001-01-01 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get the big picture in facility management and engineering for greater safety, efficiency, and economy A complete desktop reference, Facilities Engineering and Management Handbook -- by Paul Smith, Anand Seth, Roger Wessel, David Stymiest, William Porter and Mark Neitlich -- gives you all the tools you need for analyzing, comparing, anticipating, and managing the implications of engineering, maintenance, operating, and design decisions, and integrating facility systems for best results. The Handbook's life-cycle approach helps you put all relevant issues in context -- cost, durability, maintainability, operability, safety, and more -- so you can: Make farsighted, well-integrated decisions Coordinate architectural, structural, mechanical, electrical, HVAC, control instrumentation, and other needs in any type of building Handle today's concerns and technologies, such as smart buildings and telecommunications networks Visualize solutions with hundreds of illustrations Find information on all needed codes and standards governing facility design, installation, operation, and maintenance Evaluate loads on mechanical and other systems Use computer-aided systems Prepare a whole-facility economic analysis Apply useful guidance on complex specialized facilities, such as airports and industrial process plants—plus integrated complexes such as malls and government installations Plan for and integrate fire, safety, security, data, communications, lightning, controls, fuel, power, plumbing, and many other types of systems
Download or read book Dealing with Aging Process Facilities and Infrastructure written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-04-03 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the concept of aging process facilities and infrastructure in high hazard industries and highlights options for dealing with the problem while addressing safety issues This book explores the many ways in which process facilities, equipment, and infrastructure might deteriorate upon continuous exposure to operating and climatic conditions. It covers the functional and physical failure modes for various categories of equipment and discusses the many warning signs of deterioration. Dealing with Aging Process Facilities and Infrastructure also explains how to deal with equipment that may not be safe to operate. The book describes a risk-based strategy in which plant leaders and supervisors can make more informed decisions on aging situations and then communicate them to upper management effectively. Additionally, it discusses the dismantling and safe removal of facilities that are approaching their intended lifecycle or have passed it altogether. Filled with numerous case studies featuring photographs to illustrate the positive and negative experiences of others who have dealt with aging facilities, Dealing with Aging Process Facilities and Infrastructure covers the causes of equipment failures due to aging and their consequences; plant management commitment and responsibility; inspection and maintenance practices for managing life cycle; specific aging asset integrity management practices; and more. Describes symptoms and causal mechanisms of aging in various categories of process equipment Presents key considerations for making informed risk-based decisions regarding the repair or replacement of aging process facilities and infrastructure Discusses practices for managing process facility and infrastructure life cycle Includes examples and case histories of failures related to aging Dealing with Aging Process Facilities and Infrastructure is an important book for industrial practitioners who are often faced with the challenge of managing process facilities and infrastructure as they approach the end of their useful lifecycle.
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Plant Design and Operations written by Ian Sutton and published by William Andrew. This book was released on 2014-10-06 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plant Design and Operations provides practical guidance on the design, operation, and maintenance of process facilities. The book is based on years of hands-on experience gathered during the design and operation of a wide range of facilities in many different types of industry including chemicals, refining, offshore oil and gas, and pipelines. The book helps managers, engineers, operators, and maintenance specialists with advice and guidance that can be used right away in working situations. Each chapter provides information and guidance that can be used immediately. For example, the chapter on Energy Control Procedures describes seven levels of positive isolation — ranging from a closed block valve all the way to double block and bleed with line break. The Safety in Design chapter describes topics such as area classification, fire protection, stairways and platforms, fixed ladders, emergency showers, lighting, and alarms. Other areas covered in detail by the book include security, equipment, and transportation. A logical, practical guide to maintenance task organization is provided, from conducting a Job Hazards Analysis to the issue of a work permit, and to the shutdown and isolation of equipment. Common hazards are covered in detail, including flow problems, high pressure, corrosion, power failure, and many more. - Provides information to managers, engineers, operators and maintenance personnel which is immediately applicable to their operations - Supported by useful, real-world examples and experience from a wide range of facilities and industries - Includes guidance on occupational health and safety, industrial hygiene and personal protective equipment
Download or read book Engineering Economics and Economic Design for Process Engineers written by Thane Brown and published by CRC Press. This book was released on 2016-04-19 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers often find themselves tasked with the difficult challenge of developing a design that is both technically and economically feasible. A sharply focused, how-to book, Engineering Economics and Economic Design for Process Engineers provides the tools and methods to resolve design and economic issues. It helps you integrate technical a
Download or read book Guidelines for Siting and Layout of Facilities written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2018-04-24 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been written to address many of the developments since the 1st Edition which have improved how companies survey and select new sites, evaluate acquisitions, or expand their existing facilities. This book updates the appendices containing both the recommended separation distances and the checklists to help the teams obtain the information they need when locating the facility within a community, when arranging the processes within the facility, and when arranging the equipment within the process units.
Download or read book Process Equipment and Plant Design written by Subhabrata Ray and published by Elsevier. This book was released on 2020-05-29 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Equipment and Plant Design: Principles and Practices takes a holistic approach towards process design in the chemical engineering industry, dealing with the design of individual process equipment and its configuration as a complete functional system. Chapters cover typical heat and mass transfer systems and equipment included in a chemical engineering curriculum, such as heat exchangers, heat exchanger networks, evaporators, distillation, absorption, adsorption, reactors and more. The authors expand on additional topics such as industrial cooling systems, extraction, and topics on process utilities, piping and hydraulics, including instrumentation and safety basics that supplement the equipment design procedure and help to arrive at a complete plant design. The chapters are arranged in sections pertaining to heat and mass transfer processes, reacting systems, plant hydraulics and process vessels, plant auxiliaries, and engineered safety as well as a separate chapter showcasing examples of process design in complete plants. This comprehensive reference bridges the gap between industry and academia, while exploring best practices in design, including relevant theories in process design making this a valuable primer for fresh graduates and professionals working on design projects in the industry. - Serves as a consolidated resource for process and plant design, including process utilities and engineered safety - Bridges the gap between industry and academia by including practices in design and summarizing relevant theories - Presents design solutions as a complete functional system and not merely the design of major equipment - Provides design procedures as pseudo-code/flow-chart, along with practical considerations
Download or read book Manufacturing Facilities written by Dileep R. Sule and published by CRC Press. This book was released on 2008-12-22 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fierce global competition in manufacturing has made proficient facilities planning a mandatory issue in industrial engineering and technology. From plant layout and materials handling to quality function deployment and design considerations, Manufacturing Facilities: Location, Planning, and Design, Third Edition covers a wide range of topics crucia
Download or read book The Engineer s Guide to Plant Layout and Piping Design for the Oil and Gas Industries written by Geoff B. Barker and published by Gulf Professional Publishing. This book was released on 2017-11-25 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Engineer's Guide to Plant Layout and Piping Design for the Oil and Gas Industries gives pipeline engineers and plant managers a critical real-world reference to design, manage, and implement safe and effective plants and piping systems for today's operations. This book fills a training void with complete and practical understanding of the requirements and procedures for producing a safe, economical, operable and maintainable process facility. Easy to understand for the novice, this guide includes critical standards, newer designs, practical checklists and rules of thumb. Due to a lack of structured training in academic and technical institutions, engineers and pipe designers today may understand various computer software programs but lack the fundamental understanding and implementation of how to lay out process plants and run piping correctly in the oil and gas industry. Starting with basic terms, codes and basis for selection, the book focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports, then goes on to cover piping stress analysis and the daily needed calculations to use on the job. - Delivers a practical guide to pipe supports, structures and hangers available in one go-to source - Includes information on stress analysis basics, quick checks, pipe sizing and pressure drop - Ensures compliance with the latest piping and plant layout codes and complies with worldwide risk management legislation and HSE - Focuses on each piece of equipment, such as pumps, towers, underground piping, pipe sizes and supports - Covers piping stress analysis and the daily needed calculations to use on the job
Download or read book Facility Design and Management Handbook written by Eric Teicholz and published by McGraw Hill Professional. This book was released on 2001-02-14 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new paradigm in facility management A unique, just-in-time resource from profession leader Eric Teicholz, Facility Design and Management Handbook empowers you to make your facility state of the art. Packed with tips from U.S. and international case studies from government, health care, retail, finance, manufacturing, and academia, this guide gives you access to theproductivity tools, technologies, and stratagems that have revolutionized the field in the last five years, helping you to: Find the best, most cost-effective solutions for issues from “greenness” and sustainability to disaster recovery and technology integration Use new tools for space and asset allocation, project management, process coordination, and systems integration Improve accuracy in financial forecasting, budgeting, architectural and interior design planning, and market research Create cost-effective “smart” buildings with state-of-the art security, energy management, lighting strategies, and maintenance efficiency Discover innovative solutions for human resources needs Integrate the Internet into your management program Automate nearly all your tasks for major productivity gains Apply benchmarking standards and other measurements that demonstrate and assure facility management productivity Accompanying time-saving, efficiency-boosting CD-ROM is loaded with sample documents—from budgets, schedules, plans to cost-benefit analyses, checklists, forms and audits; standards for communications and database, integration, building and construction, CAD conventions; Web links and other resources.
Download or read book Process Plant Layout written by Sean Moran and published by Butterworth-Heinemann. This book was released on 2016-11-16 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Plant Layout, Second Edition, explains the methodologies used by professional designers to layout process equipment and pipework, plots, plants, sites, and their corresponding environmental features in a safe, economical way. It is supported with tables of separation distances, rules of thumb, and codes of practice and standards. The book includes more than seventy-five case studies on what can go wrong when layout is not properly considered. Sean Moran has thoroughly rewritten and re-illustrated this book to reflect advances in technology and best practices, for example, changes in how designers balance layout density with cost, operability, and safety considerations. The content covers the 'why' underlying process design company guidelines, providing a firm foundation for career growth for process design engineers. It is ideal for process plant designers in contracting, consultancy, and for operating companies at all stages of their careers, and is also of importance for operations and maintenance staff involved with a new build, guiding them through plot plan reviews. - Based on interviews with over 200 professional process plant designers - Explains multiple plant layout methodologies used by professional process engineers, piping engineers, and process architects - Includes advice on how to choose and use the latest CAD tools for plant layout - Ensures that all methodologies integrate to comply with worldwide risk management legislation
Download or read book Manufacturing Facilities Design and Material Handling written by Fred E. Meyers and published by Pearson Educación. This book was released on 2005 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project-oriented facilities design and material handling reference explores the techniques and procedures for developing an efficient facility layout, and introduces some of the state-of-the-art tools involved, such as computer simulation. A "how-to," systematic, and methodical approach leads readers through the collection, analysis and development of information to produce a quality functional plant layout. Lean manufacturing; work cells and group technology; time standards; the concepts behind calculating machine and personnel requirements, balancing assembly lines, and leveling workloads in manufacturing cells; automatic identification and data collection; and ergonomics. For facilities planners, plant layout, and industrial engineer professionals who are involved in facilities planning and design.
Download or read book Design and Layout of Foodservice Facilities written by John C. Birchfield and published by John Wiley and Sons. This book was released on 2007-12-04 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Layout of Foodservice Facilities, Third Edition offers an extensive reference manual for the entire foodservice development process–from the initial food concept through the steps of planning, financing, design, and construction, and on to the final inspection that occurs just prior to the opening of the establishment. Packed with valuable drawings, photographs, and charts, this essential nuts-and-bolts guide deals with feasibility, space analysis and programming, layout, equipment selections, and architecture and engineering.
Download or read book Good Design Practices for GMP Pharmaceutical Facilities written by Terry Jacobs and published by CRC Press. This book was released on 2016-08-19 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised publication serves as a handy and current reference for professionals engaged in planning, designing, building, validating and maintaining modern cGMP pharmaceutical manufacturing facilities in the U.S. and internationally. The new edition expands on facility planning, with a focus on the ever-growing need to modify existing legacy facilities, and on current trends in pharmaceutical manufacturing which include strategies for sustainability and LEED building ratings. All chapters have been re-examined with a fresh outlook on current good design practices.
Download or read book Integrated Design and Operation of Water Treatment Facilities written by Susumu Kawamura and published by John Wiley & Sons. This book was released on 2000-09-14 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely up-to-date coverage of water treatment facility design and operation This Second Edition of Susumu Kawamura's landmark volume offerscomprehensive coverage of water treatment facility design, from thebasic principles to the latest innovations. It covers a broadspectrum of water treatment process designs in detail and offersclear guidelines on how to choose the unit, process, and equipmentthat will maximize overall efficiency and minimize maintenancecosts. This book also explores many important operational issuesthat affect today's plant operators and facility designers. This new edition introduces several new subjects, including valueengineering, watershed management, dissolved air flotation process,filtered reservoir (clearwell) design, and electrical systemdesign. It provides expanded and updated coverage of objectives forfinished water quality, instrumentation and control, disinfectionprocess, ozonation, disinfection by-product control, the GACprocess, and the membrane filtration process. Other importantfeatures of this Second Edition include: * Practical guidance on the design of every water treatment plantcomponent * New information on plant layout, cost estimation, sedimentationissues, and more * English and SI units throughout * Help in designing for compliance with water treatment-relatedgovernment regulations Supplemented with hundreds of illustrations, charts, and tables,Integrated Design and Operation of Water Treatment Facilities,Second Edition is an indispensable, hands-on resource for civilengineers and managers, whether working on new facilities orredesigning and rebuilding existing facilities.
Download or read book Process Engineering and Industrial Management written by Jean-Pierre Dal Pont and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Engineering, the science and art of transforming raw materials and energy into a vast array of commercial materials, was conceived at the end of the 19th Century. Its history in the role of the Process Industries has been quite honorable, and techniques and products have contributed to improve health, welfare and quality of life. Today, industrial enterprises, which are still a major source of wealth, have to deal with new challenges in a global world. They need to reconsider their strategy taking into account environmental constraints, social requirements, profit, competition, and resource depletion. “Systems thinking” is a prerequisite from process development at the lab level to good project management. New manufacturing concepts have to be considered, taking into account LCA, supply chain management, recycling, plant flexibility, continuous development, process intensification and innovation. This book combines experience from academia and industry in the field of industrialization, i.e. in all processes involved in the conversion of research into successful operations. Enterprises are facing major challenges in a world of fierce competition and globalization. Process engineering techniques provide Process Industries with the necessary tools to cope with these issues. The chapters of this book give a new approach to the management of technology, projects and manufacturing. Contents Part 1: The Company as of Today 1. The Industrial Company: its Purpose, History, Context, and its Tomorrow?, Jean-Pierre Dal Pont. 2. The Two Modes of Operation of the Company – Operational and Entrepreneurial, Jean-Pierre Dal Pont. 3. The Strategic Management of the Company: Industrial Aspects, Jean-Pierre Dal Pont. Part 2: Process Development and Industrialization 4. Chemical Engineering and Process Engineering, Jean-Pierre Dal Pont. 5. Foundations of Process Industrialization, Jean-François Joly. 6. The Industrialization Process: Preliminary Projects, Jean-Pierre Dal Pont and Michel Royer. 7. Lifecycle Analysis and Eco-Design: Innovation Tools for Sustainable Industrial Chemistry, Sylvain Caillol. 8. Methods for Design and Evaluation of Sustainable Processes and Industrial Systems, Catherine Azzaro-Pantel. 9. Project Management Techniques: Engineering, Jean-Pierre Dal Pont. Part 3: The Necessary Adaptation of the Company for the Future 10. Japanese Methods, Jean-Pierre Dal Pont. 11. Innovation in Chemical Engineering Industries, Oliver Potier and Mauricio Camargo. 12. The Place of Intensified Processes in the Plant of the Future, Laurent Falk. 13. Change Management, Jean-Pierre Dal Pont. 14. The Plant of the Future, Jean-Pierre Dal Pont.
