Download or read book Engineering applications of lasers and holography written by Winston E. Kock and published by . This book was released on 1977 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Surface Engineering written by Jonathan R. Lawrence and published by Elsevier. This book was released on 2014-10-02 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers can alter the surface composition and properties of materials in a highly controllable way, which makes them efficient and cost-effective tools for surface engineering. This book provides an overview of the different techniques, the laser-material interactions and the advantages and disadvantages for different applications. Part one looks at laser heat treatment, part two covers laser additive manufacturing such as laser-enhanced electroplating, and part three discusses laser micromachining, structuring and surface modification. Chemical and biological applications of laser surface engineering are explored in part four, including ways to improve the surface corrosion properties of metals. - Provides an overview of thermal surface treatments using lasers, including the treatment of steels, light metal alloys, polycrystalline silicon and technical ceramics - Addresses the development of new metallic materials, innovations in laser cladding and direct metal deposition, and the fabrication of tuneable micro- and nano-scale surface structures - Chapters also cover laser structuring, surface modification, and the chemical and biological applications of laser surface engineering
Download or read book Industrial Applications of Lasers written by John F. Ready and published by Elsevier. This book was released on 1997-04-25 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical book with a variety of uses, this book can help applications engineers spark problem-solving techniques through the use of lasers. Industrial Application of Lasers, Second Edition takes the reader through laser fundamentals, unusual properties of laser light, types of practical lasers available, and commonly used accessory equipment. The book also applies this information to existing and developing applications. Current uses of lasers, including laser welding and cutting, electronic fabrication techniques, lightwave communications, laser-based applications in alignment, surveying, and metrology are all covered as well as discussing the potential for future applications such as all-optical computers,remote environmental monitoring, and laser-assisted thermonuclear fusion. - Explains basic laser fundamentals as well as emphasizing how lasers are used for real applications in industry - Describes the importance of laser safety - Discusses potentially important future applications such as remote environmental monitoring - Includes rare expert lore and opinion
Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-06-23 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser technologies, including the complete range of their technical applications. This forth volume covers laser applications in the medical, metrology and communications fields. Key Features: • Offers a complete update of the original, bestselling work, including many brand-new chapters. • Deepens the introduction to fundamentals, from laser design and fabrication to host matrices for solid-state lasers, energy level diagrams, hosting materials, dopant energy levels, and lasers based on nonlinear effects. • Covers new laser types, including quantum cascade lasers, silicon-based lasers, titanium sapphire lasers, terahertz lasers, bismuth-doped fiber lasers, and diode-pumped alkali lasers. • Discusses the latest applications, e.g., lasers in microscopy, high-speed imaging, attosecond metrology, 3D printing, optical atomic clocks, time-resolved spectroscopy, polarization and profile measurements, pulse measurements, and laser-induced fluorescence detection. • Adds new sections on laser materials processing, laser spectroscopy, lasers in imaging, lasers in environmental sciences, and lasers in communications. This handbook is the ideal companion for scientists, engineers, and students working with lasers, including those in optics, electrical engineering, physics, chemistry, biomedicine, and other relevant areas.
Download or read book Lasers for Medical Applications written by Helena Jelínková and published by Elsevier. This book was released on 2013-09-30 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lasers have a wide and growing range of applications in medicine. Lasers for Medical Applications summarises the wealth of recent research on the principles, technologies and application of lasers in diagnostics, therapy and surgery.Part one gives an overview of the use of lasers in medicine, key principles of lasers and radiation interactions with tissue. To understand the wide diversity and therefore the large possible choice of these devices for a specific diagnosis or treatment, the respective types of the laser (solid state, gas, dye, and semiconductor) are reviewed in part two. Part three describes diagnostic laser methods, for example optical coherence tomography, spectroscopy, optical biopsy, and time-resolved fluorescence polarization spectroscopy. Those methods help doctors to refine the scope of involvement of the particular body part or, for example, to specify the extent of a tumor. Part four concentrates on the therapeutic applications of laser radiation in particular branches of medicine, including ophthalmology, dermatology, cardiology, urology, gynecology, otorhinolaryngology (ORL), neurology, dentistry, orthopaedic surgery and cancer therapy, as well as laser coatings of implants. The final chapter includes the safety precautions with which the staff working with laser instruments must be familiar.With its distinguished editor and international team of contributors, this important book summarizes international achievements in the field of laser applications in medicine in the past 50 years. It provides a valuable contribution to laser medicine by outstanding experts in medicine and engineering. - Describes the interaction of laser light with tissue - Reviews every type of laser used in medicine: solid state, gas, dye and semiconductor - Describes the use of lasers for diagnostics
Download or read book Laser Processing of Engineering Materials written by John Ion and published by Elsevier. This book was released on 2005-03-22 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complete guide to understanding and using lasers in material processing!Lasers are now an integral part of modern society, providing extraordinary opportunities for innovation in an ever-widening range of material processing and manufacturing applications. The study of laser material processing is a core element of many materials and manufacturing courses at undergraduate and postgraduate level. As a consequence, there is now a vast amount of research on the theory and application of lasers to be absorbed by students, industrial researchers, practising engineers and production managers. Written by an acknowledged expert in the field with over twenty years' experience in laser processing, John Ion distils cutting-edge information and research into a single key text. Essential for anyone studying or working with lasers, Laser Processing of Engineering Materials provides a clear explanation of the underlying principles, including physics, chemistry and materials science, along with a framework of available laser processes and their distinguishing features and variables. This book delivers the knowledge needed to understand and apply lasers to the processing of engineering materials, and is highly recommended as a valuable guide to this revolutionary manufacturing technology. The first single volume text that treats this core engineering subject in a systematic manner Covers the principles, practice and application of lasers in all contemporary industrial processes; packed with examples, materials data and analysis, and modelling techniques
Download or read book Handbook of Laser Technology and Applications written by Chunlei Guo and published by CRC Press. This book was released on 2021-06-23 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook gives a fully updated guide to lasers and laser technologies, including the complete range of their technical applications. This third volume covers modern applications in engineering and technology, including all new and updated case studies spanning telecommunications and data storage to medicine, optical measurement, defense and security, nanomaterials processing and characterization. Key Features: • Offers a complete update of the original, bestselling work, including many brand-new chapters. • Deepens the introduction to fundamentals, from laser design and fabrication to host matrices for solid-state lasers, energy level diagrams, hosting materials, dopant energy levels, and lasers based on nonlinear effects. • Covers new laser types, including quantum cascade lasers, silicon-based lasers, titanium sapphire lasers, terahertz lasers, bismuth-doped fiber lasers, and diode-pumped alkali lasers. • Discusses the latest applications, e.g., lasers in microscopy, high-speed imaging, attosecond metrology, 3D printing, optical atomic clocks, time-resolved spectroscopy, polarization and profile measurements, pulse measurements, and laser-induced fluorescence detection. • Adds new sections on laser materials processing, laser spectroscopy, lasers in imaging, lasers in environmental sciences, and lasers in communications. This handbook is the ideal companion for scientists, engineers, and students working with lasers, including those in optics, electrical engineering, physics, chemistry, biomedicine, and other relevant areas.
Download or read book Photonics and Laser Engineering Principles Devices and Applications written by Alphan Sennaroglu and published by McGraw-Hill Education. This book was released on 2010-06-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. In-Depth Coverage of Photonics and Laser Engineering Written by an internationally acclaimed expert, this comprehensive volume provides the background in theoretical physics necessary to understand practical applications of lasers and optics. Photonics and Laser Engineering Principles, Devices, and Applications discusses theories of electromagnetism, geometrical optics, quantum mechanics, and laser physics and connects them to relevant implementations in areas such as fiber optics, optical detection, laser resonator design, and semiconductor lasers. Each chapter contains detailed equations, sample problems, and solutions to reinforce the concepts presented. Photonics and Laser Engineering covers: Electromagnetic wave theory of light with applications Geometrical optics Laser beams and resonators Classical and quantum theories of light-matter interactions Laser technology, including optical gain, oscillation, solid-state lasers, Q-switching, and laser mode locking Semiconductor lasers Anisotropic media and modulation of light Dielectric waveguides and optical fibers Nonlinear optics and the Raman effect
Download or read book Lasers in Materials Science written by Marta Castillejo and published by Springer Science & Business Media. This book was released on 2014-01-08 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers various aspects of lasers in materials science, including a comprehensive overview on basic principles of laser-materials interactions and applications enabled by pulsed laser systems. The material is organized in a coherent way, providing the reader with a harmonic architecture. While systematically covering the major current and emerging areas of lasers processing applications, the Volume provides examples of targeted modification of material properties achieved through careful control of the processing conditions and laser irradiation parameters. Special emphasis is placed on specific strategies aimed at nanoscale control of material structure and properties to match the stringent requirements of modern applications. Laser fabrication of novel nanomaterials, which expands to the domains of photonics, photovoltaics, sensing, and biomedical applications, is also discussed in the Volume. This book assembles chapters based on lectures delivered at the Venice International School on Lasers in Materials Science which was held in Isola di San Servolo, Venice, Italy, in July, 2012.
Download or read book Laser Applications in Surface Science and Technology written by Horst-Günter Rubahn and published by John Wiley & Sons. This book was released on 1999-03-17 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ob zur Oberflachenanalytik oder zur Oberflachenbearbeitung - die Einsatzgebiete von Lasern in der Materialwissenschaft werden standig erweitert. Dabei ablaufende Prozesse beschranken sich gelegentlich auf einfaches Erwarmen und Schmelzen, haufig finden jedoch kompliziertere Vorgange wie die Bildung von Plasma oder kollektive Anregungen statt. Verschiedenste Techniken, die zugehorigen physikalischen Grundlagen und alle wichtigen Prozesse beschreibt dieses Buch, wobei auch neueste Themen wie ultrakurze Laserpulse oder die nichtlineare Oberflachenspektroskpoie zur Sprache kommen. (05/99)
Download or read book Solid State Laser Engineering written by Walter Koechner and published by Springer. This book was released on 2013-11-11 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has once again been updated to keep pace with recent developments and to maintain Koechner's position as "the bible" of the field. Written from an industrial perspective, it provides a detailed discussion of, and data for, solid-state lasers, their characteristics, design and construction.
Download or read book CO2 Lasers Effects and Applications written by W Duley and published by Elsevier. This book was released on 2012-12-02 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: CO2 Lasers: Effects and Applications examines and summarizes the important applications of the device in different areas of study like physics, chemistry, and engineering. In some parts of the book, the reader is assumed to be knowledgeable in university level mathematics or some specialized area in physics or chemistry. The book consists of 10 chapters where the first two establish the general concepts on lasers and CO2 lasers, respectively. Chapter 3 takes the reader further and presents a comprehensive review of optical components for use such as detectors, windows, and mirrors. Because the CO2 laser is mostly used as a heat source, the theory of laser-surface heating is relevant in the discussion. This theory is presented in Chapter 4. Chapters 5 and 6 meanwhile present a summary of observations on cutting, welding, and some related topics. The following chapters discuss the different applications of CO2 lasers in different areas and processes. Some of these applications include in the generation of thermal effect, laser deposition of thin films, spectroscopy, laser photochemistry, and meteorology and communication systems. The text is a good source of reference to both students and scientists in the areas of physics, chemistry, and engineering.
Download or read book Laser Additive Manufacturing written by Milan Brandt and published by Woodhead Publishing. This book was released on 2016-09-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser Additive Manufacturing: Materials, Design, Technologies, and Applications provides the latest information on this highly efficient method of layer-based manufacturing using metals, plastics, or composite materials. The technology is particularly suitable for the production of complex components with high precision for a range of industries, including aerospace, automotive, and medical engineering. This book provides a comprehensive review of the technology and its range of applications. Part One looks at materials suitable for laser AM processes, with Part Two discussing design strategies for AM. Parts Three and Four review the most widely-used AM technique, powder bed fusion (PBF) and discuss other AM techniques, such as directed energy deposition, sheet lamination, jetting techniques, extrusion techniques, and vat photopolymerization. The final section explores the range of applications of laser AM. - Provides a comprehensive one-volume overview of advances in laser additive manufacturing - Presents detailed coverage of the latest techniques used for laser additive manufacturing - Reviews both established and emerging areas of application
Download or read book Ultrafast Lasers written by Martin E. Fermann and published by CRC Press. This book was released on 2002-10-25 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering high-energy ultrafast amplifiers and solid-state, fiber, and diode lasers, this reference examines recent developments in high-speed laser technology. It presents a comprehensive survey of ultrafast laser technology, its applications, and future trends in various scientific and industrial areas. Topics include: micromachining applications for metals, dielectrics, and biological tissue; advanced electronics and semiconductor processing; optical coherence tomography; multiphoton microscopy; optical sampling and scanning; THz generation and imaging; optical communication systems; absolute phase control of optical signals; and more.
Download or read book Introduction to Laser Technology written by C. Breck Hitz and published by John Wiley & Sons. This book was released on 2012-04-10 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only introductory text on the market today that explains the underlying physics and engineering applicable to all lasers Although lasers are becoming increasingly important in our high-tech environment, many of the technicians and engineers who install, operate, and maintain them have had little, if any, formal training in the field of electro-optics. This can result in less efficient usage of these important tools. Introduction to Laser Technology, Fourth Edition provides readers with a good understanding of what a laser is and what it can and cannot do. The book explains what types of laser to use for different purposes and how a laser can be modified to improve its performance in a given application. With a unique combination of clarity and technical depth, the book explains the characteristics and important applications of commercial lasers worldwide and discusses light and optics, the fundamental elements of lasers, and laser modification.? In addition to new chapter-end problems, the Fourth Edition includes new and expanded chapter material on: Material and wavelength Diode Laser Arrays Quantum-cascade lasers Fiber lasers Thin-disk and slab lasers Ultrafast fiber lasers Raman lasers Quasi-phase matching Optically pumped semiconductor lasers Introduction to Laser Technology, Fourth Edition is an excellent book for students, technicians, engineers, and other professionals seeking a fuller, more formal introduction to the field of laser technology.
Download or read book Lasers and Optical Engineering written by Pankaj K. Das and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: A textbook on lasers and optical engineering should include all aspects of lasers and optics; however, this is a large undertaking. The objective of this book is to give an introduction to the subject on a level such that under graduate students (mostly juniors/seniors), from disciplines like electrical engineering, physics, and optical engineering, can use the book. To achieve this goal, a lot of basic background material, central to the subject, has been covered in optics and laser physics. Students with an elementary knowledge of freshman physics and with no formal courses in electromagnetic theory should be able to follow the book, although for some sections, knowledge of electromagnetic theory, the Fourier transform, and linear systems would be highly beneficial. There are excellent books on optics, laser physics, and optical engineering. Actually, most of my knowledge was acquired through these. However, when I started teaching an undergraduate course in 1974, under the same heading as the title of this book, I had to use four books to cover the material I thought an electrical engineer needed for his introduction to the world of lasers and optical engineering. In my sabbatical year, 1980-1981, I started writing class notes for my students, so that they could get through the course by possibly buying only one book. Eventually, these notes grew with the help of my undergraduate and graduate students, and the final result is this book.
Download or read book Guide to Laser Safety written by A. Roy Henderson and published by Springer Science & Business Media. This book was released on 1997-02-28 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a practical guide to the safe use of lasers in science, education, industry, telecommunications, entertainment and medicine. Henderson explains the nature of laser hazards and how to implement safety controls to international standards.
