Download or read book Engineering Analysis with SolidWorks Simulation 2012 written by Paul M. Kurowski and published by SDC Publications. This book was released on 2012 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SolidWorks Simulation 2012 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SolidWorks Simulation 2012 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SolidWorks Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered: Linear static analysis of parts and assemblies Contact stress analysis Frequency (modal) analysis Buckling analysis Thermal analysis Drop test analysis Nonlinear analysis Dynamic analysis Random vibration analysis h and p adaptive solution methods Modeling techniques Implementation of FEA in the design process Management of FEA projects FEA terminology

Download or read book Engineering Analysis with SOLIDWORKS Simulation 2016 written by Paul Kurowski and published by SDC Publications. This book was released on 2016-02 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SOLIDWORKS Simulation 2016 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2016 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters.

Download or read book Engineering Analysis with SOLIDWORKS Simulation 2017 written by Paul Kurowski and published by SDC Publications. This book was released on 2017-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SOLIDWORKS Simulation 2017 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2017 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters.

Download or read book Mechanics of Materials Labs with SolidWorks Simulation 2014 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2014 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in a mechanics of material course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SolidWorks, and all the part files used in the book. -- back cover.

Download or read book Engineering Analysis with SOLIDWORKS Simulation 2022 written by Paul Kurowski and published by SDC Publications. This book was released on with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SOLIDWORKS Simulation 2022 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2022 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered • Linear static analysis of parts and assemblies • Contact stress analysis • Frequency (modal) analysis • Buckling analysis • Thermal analysis • Drop test analysis • Nonlinear analysis • Dynamic analysis • Random vibration analysis • h and p adaptive solution methods • Modeling techniques • Implementation of FEA in the design process • Management of FEA projects • FEA terminology

Download or read book Engineering Analysis with SOLIDWORKS Simulation 2018 written by Paul Kurowski and published by SDC Publications. This book was released on 2018-03 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SOLIDWORKS Simulation 2018 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2018 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters.

Download or read book Introduction to Static Analysis Using SolidWorks Simulation written by Radostina V. Petrova and published by CRC Press. This book was released on 2014-09-09 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uses Finite Element Analysis (FEA) as Implemented in SolidWorks SimulationOutlining a path that readers can follow to ensure a static analysis that is both accurate and sound, Introduction to Static Analysis using SolidWorks Simulation effectively applies one of the most widely used software packages for engineering design to the concepts of static

Download or read book Engineering Analysis with SOLIDWORKS Simulation 2019 written by Paul Kurowski and published by SDC Publications. This book was released on 2019 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Analysis with SOLIDWORKS Simulation 2019 goes beyond the standard software manual. Its unique approach concurrently introduces you to the SOLIDWORKS Simulation 2019 software and the fundamentals of Finite Element Analysis (FEA) through hands-on exercises. A number of projects are presented using commonly used parts to illustrate the analysis features of SOLIDWORKS Simulation. Each chapter is designed to build on the skills, experiences and understanding gained from the previous chapters. Topics covered Linear static analysis of parts and assembliesContact stress analysisFrequency (modal) analysisBuckling analysisThermal analysisDrop test analysisNonlinear analysisDynamic analysisRandom vibration analysish and p adaptive solution methodsModeling techniquesImplementation of FEA in the design processManagement of FEA projectsFEA terminology

Download or read book Thermal Analysis with SolidWorks Simulation 2013 written by Paul M. Kurowski and published by SDC Publications. This book was released on 2013 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis with SolidWorks Simulation 2013 goes beyond the standard software manual. It concurrently introduces the reader to thermal analysis and its implementation in SolidWorks Simulation using hands-on exercises. A number of projects are presented to illustrate thermal analysis and related topics. Each chapter is designed to build on the skills and understanding gained from previous exercises. Thermal Analysis with SolidWorks Simulation 2013 is designed for users who are already familiar with basics of Finite Element Analysis (FEA) using SolidWorks Simulation or who have completed the book Engineering Analysis with SolidWorks Simulation 2013. Thermal Analysis with SolidWorks Simulation 2013 builds on these topics in the area of thermal analysis. Some understanding of FEA and SolidWorks Simulation is assumed.

Download or read book Introduction to Finite Element Analysis Using SolidWorks Simulation 2011 written by Randy Shih and published by SDC Publications. This book was released on 2011-01-20 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Introduction to Finite Element Analysis Using SolidWorks Simulation 2011 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of Finite Element Analysis are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SolidWorks Simulation in performing Linear Static Stress Analysis and basic Model Analysis. This text covers SolidWorks Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important Finite Element Analysis techniques and concepts. This textbook contains a series of thirteen tutorial style lessons designed to introduce beginning FEA users to SolidWorks Simulation. The basic premise of this book is that the more designs you create using SolidWorks Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Download or read book Finite Element Simulations with ANSYS Workbench 17 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2017 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Finite Element Simulations with ANSYS Workbench 17 is a comprehensive and easy to understand workbook. Printed in full color, it utilizes rich graphics and step-by-step instructions to guide you through learning how to perform finite element simulations using ANSYS Workbench. Twenty seven real world case studies are used throughout the book. Many of these case studies are industrial or research projects that you build from scratch. Prebuilt project files are available for download should you run into any problems. Companion videos, that demonstrate exactly how to perform each tutorial, are also available Relevant background knowledge is reviewed whenever necessary. To be efficient, the review is conceptual rather than mathematical. Key concepts are inserted whenever appropriate and summarized at the end of each chapter. Additional exercises or extension research problems are provided as homework at the end of each chapter. A learning approach emphasizing hands-on experiences spreads though this entire book. A typical chapter consists of 6 sections. The first two provide two step-by-step examples. The third section tries to complement the exercises by providing a more systematic view of the chapter subject. The following two sections provide more exercises. The final section provides review problems.

Download or read book Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2015 written by Randy Shih and published by SDC Publications. This book was released on 2015 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of Introduction to Finite Element Analysis Using SOLIDWORKS Simulation 2015 is to introduce the aspects of Finite Element Analysis (FEA) that are important to engineers and designers. Theoretical aspects of FEA are also introduced as they are needed to help better understand the operation. The primary emphasis of the text is placed on the practical concepts and procedures needed to use SOLIDWORKS Simulation in performing Linear Static Stress Analysis and basic Modal Analysis. This text covers SOLIDWORKS Simulation and the lessons proceed in a pedagogical fashion to guide you from constructing basic truss elements to generating three-dimensional solid elements from solid models. This text takes a hands-on, exercise-intensive approach to all the important FEA techniques and concepts. This textbook contains a series of fourteen tutorial style lessons designed to introduce beginning FEA users to SOLIDWORKS Simulation. The basic premise of this book is that the more designs you create using SOLIDWORKS Simulation, the better you learn the software. With this in mind, each lesson introduces a new set of commands and concepts, building on previous lessons.

Download or read book Analysis of Machine Elements Using SOLIDWORKS Simulation 2022 written by Shahin S. Nudehi and published by SDC Publications. This book was released on with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Machine Elements Using SOLIDWORKS Simulation 2022 is written primarily for first-time SOLIDWORKS Simulation 2022 users who wish to understand finite element analysis capabilities applicable to stress analysis of mechanical elements. The focus of examples is on problems commonly found in introductory, undergraduate, Design of Machine Elements or similarly named courses. In order to be compatible with most machine design textbooks, this text begins with problems that can be solved with a basic understanding of mechanics of materials. Problem types quickly migrate to include states of stress found in more specialized situations common to a design of mechanical elements course. Paralleling this progression of problem types, each chapter introduces new software concepts and capabilities. Many examples are accompanied by problem solutions based on use of classical equations for stress determination. Unlike many step-by-step user guides that only list a succession of steps, which if followed correctly lead to successful solution of a problem, this text attempts to provide insight into why each step is performed. This approach amplifies two fundamental tenets of this text. The first is that a better understanding of course topics related to stress determination is realized when classical methods and finite element solutions are considered together. The second tenet is that finite element solutions should always be verified by checking, whether by classical stress equations or experimentation. Each chapter begins with a list of learning objectives related to specific capabilities of the SOLIDWORKS Simulation program introduced in that chapter. Most software capabilities are repeated in subsequent examples so that users gain familiarity with their purpose and are capable of using them in future problems. All end-of-chapter problems are accompanied by evaluation "check sheets" to facilitate grading assignments.

Download or read book Mechanics of Materials Labs with SolidWorks Simulation 2013 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2013-10-23 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in a mechanics of material course, which is usually taught in undergraduate courses. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SolidWorks, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SolidWorks Simulation can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most mechanics of materials textbooks. There are 14 chapters in this book. Each chapter is designed as one week’s workload, consisting of 2 to 3 sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of mechanics of materials. Typically, each section takes 15-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 121 page introduction to Part and Assembly Modeling with SolidWorks in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SolidWorks pdf is designed for those students who have no experience with SolidWorks and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Download or read book Thermal Analysis with SolidWorks Simulation 2012 written by Paul M. Kurowski and published by SDC Publications. This book was released on 2012 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Analysis with SolidWorks Simulation 2012 goes beyond the standard software manual. It concurrently introduces the reader to thermal analysis and its implementation in SolidWorks Simulation using hands-on exercises. A number of projects are presented to illustrate thermal analysis and related topics. Each chapter is designed to build on the skills and understanding gained from previous exercises. Thermal Analysis with SolidWorks Simulation 2012 is designed for users who are already familiar with basics of Finite Element Analysis (FEA) using SolidWorks Simulation or who have completed the book Engineering Analysis with SolidWorks Simulation 2012. Thermal Analysis with SolidWorks Simulation 2012 builds on these topics in the area of thermal analysis. Some understanding of FEA and SolidWorks Simulation is assumed.

Download or read book Engineering Statics Labs with SOLIDWORKS Motion 2015 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2015 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in an engineering statics course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SOLIDWORKS, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SOLIDWORKS Motion can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most statics textbooks. There are 8 chapters in this book. Each chapter is designed as one week’s workload, consisting of 2 to 3 sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of statics. Typically, each section takes 15-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 123 page introduction to Part and Assembly Modeling with SOLIDWORKS in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SOLIDWORKS PDF is designed for those students who have no experience with SOLIDWORKS and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.

Download or read book Engineering Dynamics Labs with SolidWorks Motion 2014 written by Huei-Huang Lee and published by SDC Publications. This book was released on 2014 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as a software-based lab book to complement a standard textbook in an engineering dynamics course, which is usually taught at the undergraduate level. This book can also be used as an auxiliary workbook in a CAE or Finite Element Analysis course for undergraduate students. Each book comes with a disc containing video demonstrations, a quick introduction to SolidWorks eBook, and all the part files used in the book. This textbook has been carefully developed with the understanding that CAE software has developed to a point that it can be used as a tool to aid students in learning engineering ideas, concepts and even formulas. These concepts are demonstrated in each section of this book. Using the graphics-based tools of SolidWorks Simulation can help reduce the dependency on mathematics to teach these concepts substantially. The contents of this book have been written to match the contents of most mechanics of materials textbooks. There are 11 chapters in this book. Each chapter contains two sections. Each section is designed for a student to follow the exact steps in that section and learn a concept or topic of Engineering Dynamics. Typically, each section takes 20-40 minutes to complete the exercises. Each copy of this book comes with a disc containing videos that demonstrate the steps used in each section of the book, a 123 page introduction to Part and Assembly Modeling with SolidWorks in PDF format, and all the files readers may need if they have any trouble. The concise introduction to SolidWorks PDF is designed for those students who have no experience with SolidWorks and want to feel more comfortable working on the exercises in this book. All of the same content is available for download on the book’s companion website.