Download or read book Energy Value Stream Mapping written by Neha Verma and published by Booksclinic Publishing. This book was released on 2020-03-19 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a Fiction book.

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer. This book was released on 2013-11-27 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.

Download or read book Value Stream Mapping How to Visualize Work and Align Leadership for Organizational Transformation written by Karen Martin and published by McGraw Hill Professional. This book was released on 2013-10-25 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of its kind—a Value Stream Mapping book written for those in service and office environments who need to streamline operations Value Stream Mapping is a practical, how-to guide that helps decision-makers improve value stream efficiency in virtually any setting, including construction, energy, financial service, government, healthcare, R&D, retail, and technology. It gives you the tools to address a wider range of important VSM issues than any other such book, including the psychology of change, leadership, creating teams, building consensus, and charter development. Karen Martin is principal consultant for Karen Martin & Associates, LLC, instructor for the University of California, San Diego's Lean Enterprise program, and industry advisor to the University of San Diego's Industrial and Systems Engineering program. Mike Osterling provides support and leadership to manufacturing and non-manufacturing organizations on their Lean Transformation Journey. In a continuous improvement leadership role for six years, Mike played a key role in Square D Company's lean transformation in the 1990s.

Download or read book Learning to See written by Mike Rother and published by Lean Enterprise Institute. This book was released on 2003 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean production is the gold standard in production systems, but has proven famously difficult to implement in North America. Mass production relies on large inventories, uses "push" processes and struggles with long lead times. Moving towards a system that eliminates muda ("waste") caused by overproduction, while challenging, proves necessary for improved efficiency. Often overlooked, value stream mapping is the essential planning stage for any Lean transformation. In Mike Rother and John Shook's essential guide, you follow the value stream mapping undertaken for Acme Stamping, for its current and future state. Fully illustrated and well-organized, Learning to See is a must-see for the value stream manager.

Download or read book Metrics Based Process Mapping written by Karen Martin and published by CRC Press. This book was released on 2012-10-22 with total page 119 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrics-Based Process Mapping (MBPM) is a tactical-level, visual mapping approach that enables improvement teams to make effective, data-based decisions regarding waste elimination and measure ongoing process performance. The mapping technique, often used to drill down from a value stream map, integrates the functional orientation of traditional swim-lane process maps with time and quality metrics that are essential for designing improved processes. Building on the success of its popular predecessor, Metrics-Based Process Mapping: An Excel-Based Solution, this book takes readers to the next level in understanding processes and process improvement. Included with the book is an interactive macro-driven Excel tool, which allows users to electronically capture their current and future state maps. The tool also audits the maps for completeness, summarizes the metrics, and auto-calculates the improvements. Improvements to this version include: Foundational content about processes—what they are and how they vary A description of the difference between value-stream and process-level maps New content about how to bridge the gap between your current state and your desired future state Tips for effective team formation and mapping facilitation An implementation plan for those using the mapping methodology as a standalone tool and not part of a Kaizen Event The Excel-based tool included on the accompanying CD provides readers with a user-friendly way to electronically archive manually created maps in team settings for easier storage and distribution across your entire organization. While current and future state MBPMs are initially created during team-based activities using butcher paper and post-its, the electronic maps serve as standard work documentation for the improved process, enabling training, communication, and process monitoring activities. This flexible, user-friendly tool includes: A custom toolbar that simplifies map creation and editing Automated calculation of key metrics An audit feature to prevent mapping errors The ability to simulate how improvements will impact staffing requirements System Requirements: The tool is intended for use on PCs using Excel 2003 or later—it will NOT function with earlier versions of Excel, or on Macintosh computers. View a demo of the Excel tool at: www.mbpmapping.com

Download or read book Using Hoshin Kanri to Improve the Value Stream written by Elizabeth A. Cudney and published by CRC Press. This book was released on 2018-01-29 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Using Hoshin Kanri to Improve the Value Stream, leading lean and quality expert Elizabeth Cudney constructs a complete how-to guide that any organization can employ to start a Lean effort correctly and keep it on track. Rooted in practical examples garnered over years of hand-on practice, she illustrates the key principles of lean and value, and

Download or read book Installing Efficiency Methods written by Charles Edward Knoeppel and published by . This book was released on 1915 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lean and Green Manufacturing written by Kaliyan Mathiyazhagan and published by Springer Nature. This book was released on 2021-10-16 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a stage-by-stage integration of lean and green manufacturing paradigms to achieve environmental and economic benefits. The book includes chapters on conceptual development for incorporating the lean and green paradigm, and methods, tools and techniques for developing and integrating lean manufacturing. Several case studies which demonstrate the benefits of integrating lean and green manufacturing techniques are also covered here. The contents of this book are expected to support researchers and practitioners in the implementation of integrated lean and green manufacturing technologies.

Download or read book Value Stream Mapping Workshop written by Mike Rother and published by Lean Enterprises Inst Incorporated. This book was released on 2000 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: When Mike Rother and John Shook first realized the power of value stream mapping in the mid-1990s they began to offer workshops on this invaluable technique.

Download or read book Green Intentions written by Brett Wills and published by CRC Press. This book was released on 2020-10-28 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developed by a plant manager who experienced first-hand the challenges to going green in a business environment, Green Intentions provides organizations with a simple, straightforward, and practical approach to green the Green Value Stream (GVS) process that is as mindful as it is profitable. Based on the highly successful, Lean philosophy, the GVS process shows you how to quickly identify, measure, and minimize the seven green wastes to realize immediate cost savings. With the initial savings from harvesting the low-hanging fruit, organizations will have the support and momentum needed to eliminate each of the green wastes, leading to environmental sustainability and the substantial business benefits that follow, including increased revenues, new customers, employee retention, innovation, and increased shareholder value. Part I, Going Green shows how the green value stream provides a dynamic, proven, and successful approach to going green. It also defines each of the seven green wastes, explains the overall green value stream process, provides guidance on implementing it in your organization, and shows how to map your green value stream. Part II, The Seven Green Wastes provides a step-by-step process for minimizing and eliminating each of the seven wastes. It includes real-life examples illustrating the environmental and economic benefits associated with moving toward the elimination of each. The book also includes: A Green Dictionary that defines current terms associated with the green movement Web links and other resources to help you in your journey toward environmental sustainability An environmental primer that clears through the rhetoric to give you a clear picture of what is going on with the environment and what the end goal of environmental and overall sustainability needs to look like

Download or read book Creating Continuous Flow written by Mike Rother and published by Lean Enterprise Institute. This book was released on 2001-12 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This workbook explains in simple, step-by-step terms how to introduce and sustain lean flows of material and information in pacemaker cells and lines, a prerequisite for achieving a lean value stream.A sight we frequently encounter when touring plants is the relocation of processing steps from departments (process villages) to product-family work cells, but too often these "cells" produce only intermittent and erratic flow. Output gyrates from hour to hour and small piles of inventory accumulate between each operation so that few of the benefits of cellularization are actually being realized; and, if the cell is located upstream from the pacemaker process, none of the benefits may ever reach the customer.This sequel to Learning to See (which focused on plant level operations) provides simple step-by-step instructions for eliminating waste and creating continuous flow at the process level. This isn't a workbook you will read once then relegate to the bookshelf. It's an action guide for managers, engineers, and production associates that you will use to improve flow each and every day.Creating Continuous Flow takes you to the next level in work cell design where you'll achieve even greater cost and lead time savings. You'll learn: where to focus your continuous flow efforts, how to create much more efficient work cells and lines, how to operate a pacemaker process so that a lean value stream is possible, how to sustain the gains, and keep improving.Creating Continuous Flow is the next logical step after Learning to See. The value-stream mapping process defined the pacemaker process and the overall flow of products and information in the plant. The next step is to shift your focus from the plant to the process level by zeroing in on the pacemaker process, which sets the production rhythm for the plant or value stream, and apply the principles of continuous flow.Every production facility has at least one pacemaker process. The pacemaker processes is usually where products take their final form before going to external customers. It’s called the pacemaker because how you operate here determines both how well you can serve the customer and what the demand pattern is like for your upstream supplying processes.How the pacemaker process operates is critically important. A steady and consistently flowing pacemaker places steady and consistent demands on the rest of the value stream. The continuous flow processing that results allows companies to create leaner value streams.[Source : 4e de couv.]

Download or read book Assessment and Simulation Tools for Sustainable Energy Systems written by Fausto Cavallaro and published by Springer Science & Business Media. This book was released on 2013-08-13 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the concept of energy has been revised and a new model based on the principle of sustainability has become more and more pervasive. The appraisal of energy technologies and projects is complex and uncertain as the related decision making has to encompass environmental, technical, economic and social factors and information sources. The scientific procedure of assessment has a vital role as it can supply the right tools to evaluate the actual situation and make realistic forecasts of the effects and outcomes of any actions undertaken. Assessment and Simulation Tools for Sustainable Energy Systems offers reviews of the main assessment and simulation methods used for effective energy assessment. Divided across three sections, Assessment and Simulation Tools for Sustainable Energy Systems develops the reader’s ability to select suitable tools to support decision making and implementation of sustainable energy projects. The first is dedicated to the analysis of theoretical foundations and applications of multi-criteria decision making. This is followed by chapters concentrating on the theory and practice of fuzzy inference, neural nets and algorithms genetics. Finally, simulation methods such as Monte Carlo analysis, mathematical programming and others are detailed. This comprehensive illustration of these tools and their application makes Assessment and Simulation Tools for Sustainable Energy Systems a key guide for researchers, scientists, managers, politicians and industry professionals developing the field of sustainable energy systems. It may also prompt further advancements in soft computing and simulation issues for students and researchers.

Download or read book Advances in Sustainable and Competitive Manufacturing Systems written by Américo Azevedo and published by Springer Science & Business Media. This book was released on 2013-06-25 with total page 1644 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings includes the set of revised papers from the 23rd International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2013). This conference aims to provide an international forum for the exchange of leading edge scientific knowledge and industrial experience regarding the development and integration of the various aspects of Flexible Automation and Intelligent Manufacturing Systems covering the complete life-cycle of a company’s Products and Processes. Contents will include topics such as: Product, Process and Factory Integrated Design, Manufacturing Technology and Intelligent Systems, Manufacturing Operations Management and Optimization and Manufacturing Networks and MicroFactories.

Download or read book Clarity First How Smart Leaders and Organizations Achieve Outstanding Performance written by Karen Martin and published by McGraw Hill Professional. This book was released on 2018-03-02 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Award-winning business performance improvement and Lean management expert Karen Martin diagnoses a ubiquitous business management and leadership problem—the lack of clarity—and outlines specific actions to dramatically improve organizational performance. Through her global consulting projects, keynote speeches, and work with thousands of leaders, Karen has seen first-hand how a pervasive lack of clarity strangles business performance and erodes employee engagement. Ambiguity is the corporate default state, a condition so prevalent that “tolerance for ambiguity” has become a clichéd job requirement. It doesn’t have to be this way. In Clarity First, Karen provides methods and insights for achieving clarity to unleash potential, innovate at higher levels, and solve the problems that matter to deliver outstanding business results. Both a visionary road map and practical guide, this book will help leaders: •Identify and communicate the organization’s true purpose •Set achievable priorities •Deliver greater customer value through more efficient processes •Provide greater transparency about true versus assumed performance •Build strong problem-solving and critical thinking capabilities throughout the organization •Develop personal clarity to be a more direct, purposeful, and successful leader Eliminating ambiguity is the first step for leaders and organizations to achieve strategic goals. Learn how to gain the clarity needed to make better decisions, lead more effectively, and boost organizational performance. When it comes to leading an outstanding organization, every great leader needs Clarity First.

Download or read book Manufacturing Techniques for Materials written by T.S. Srivatsan and published by CRC Press. This book was released on 2018-04-09 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing Techniques for Materials: Engineering and Engineered provides a cohesive and comprehensive overview of the following: (i) prevailing and emerging trends, (ii) emerging developments and related technology, and (iii) potential for the commercialization of techniques specific to manufacturing of materials. The first half of the book provides the interested reader with detailed chapters specific to the manufacturing of emerging materials, such as additive manufacturing, with a valued emphasis on the science, technology, and potentially viable practices specific to the manufacturing technique used. This section also attempts to discuss in a lucid and easily understandable manner the specific advantages and limitations of each technique and goes on to highlight all of the potentially viable and emerging technological applications. The second half of this archival volume focuses on a wide spectrum of conventional techniques currently available and being used in the manufacturing of both materials and resultant products. Manufacturing Techniques for Materials is an invaluable tool for a cross-section of readers including engineers, researchers, technologists, students at both the graduate level and undergraduate level, and even entrepreneurs.

Download or read book Factory Planning Manual written by Michael Schenk and published by Springer Science & Business Media. This book was released on 2009-10-29 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central purpose of this book is to impart knowledge, skills and practical - plementation methods for the planning and operation of adaptable production - cilities and factories. It addresses planning methods and procedures for various types of production facility up to and including entire factories, and is aimed at practicing factory planners and students alike. The book provides facts and demonstrates practical processes using case studies for the purposes of illustration, so that ultimately skills can be acquired that make independent practical implementation and app- cation possible. It is based on up-to-the-minute practical experience and univ- sally applicable knowledge of the planning and technological design of adaptable production facilities (manufacturing and assembly) and factories. In comparison to existing, thematically-similar reference books, what is in- vative about this manual is that it provides the impulse for a more flexible pl- ning approach for the efficient design of adaptable production facilities using - sponsive, unconventional planning and organizational solutions. The book aims to provide a way of integrating systematic and situation-driven planning methods in a meaningful way. Situation-driven planning is becoming increasingly important to production facilities in these fast-moving times of change, in particular in terms of resource and energy efficiency. Existing technical and organizational course of action in terms of resources (both human and technical) need to be selected for the specific case at hand, and changes (to workshops, products, processes and equ- ment) need to be managed.

Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)