Download or read book Energy Savings in Agricultural Machinery and Mechanization written by G. Pellizzi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this work is to check the possibility of substantial energy savings in the European agricultural mechanisation. In this analytical survey the possibilities of energy saving in stationary plants nor the indirect savings in chemical inputs are considered. The analysis has been essentially bibliographical, without any direct experimental analysis. After some general considerations on the European farming structure and the present energy requirements of the sector, ,the European agricultural machines and tractors industry is outlined. At the start of this analytical survey, the working schemes and the energy requirements are examined for the different crops. The evolution of tractor manufacturing and the derived machines is also surveyed, gathering the specific implements into the main groups: tractors (and derived machines); soil tillage machines, intercultivation machines and harvesting machines. The evolution and the energy saving potential in tractors and farming machines management is examined and the actions for development are outlined.
Download or read book Sustainable Agricultural Mechanization A Framework for Africa written by Food and Agriculture Organization of the United Nations and published by Food & Agriculture Org.. This book was released on 2019-03-13 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This framework presents ten interrelated principles/elements to guide Sustainable Agricultural Mechanization in Africa (SAMA). Further, it presents the technical issues to be considered under SAMA and the options to be analysed at the country and sub regional levels. The ten key elements required in a framework for SAMA are as follows: The analysis in the framework calls for a specific approach, involving learning from other parts of the world where significant transformation of the agricultural mechanization sector has already occurred within a three-to-four decade time frame, and developing policies and programmes to realize Africa’s aspirations of Zero Hunger by 2025. This approach entails the identification and prioritization of relevant and interrelated elements to help countries develop strategies and practical development plans that create synergies in line with their agricultural transformation plans. Given the unique characteristics of each country and the diverse needs of Africa due to the ecological heterogeneity and the wide range of farm sizes, the framework avoids being prescriptive.
Download or read book Agricultural Mechanization in Sub Saharan Africa written by Karim Houmy and published by Food & Agriculture Organization of the UN (FAO). This book was released on 2013 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manual work carried out by farmers and their families is often both arduous and time consuming and in many countries this is a major constraint to increasing agricultural production. Such day-to-day drudgery is a major contributoring factor in the migration of people, particularly the young, from the rural countryside to seek the prospect of a better life in the towns and cities. Farm production can be substantially increased through the use of mechanical technologies which both are labor-saving and directly increase yields and production. This document provides guidelines on the development and formulation of an agricultural mechanization strategy and forms part of FAO's approach on sustainable production intensification.
Download or read book Farmer s Tax Guide written by and published by . This book was released on 1998 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Conceptual Basis Formalisations and Parameterization of the Stics Crop Model written by Nadine Brisson and published by Editions Quae. This book was released on 2009-01-19 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: The STICS crop model has been developed since 1996 at INRA in collaboration with other research and technical institutes. The model syntheses, illustrates and concretizes an important part of the French agronomic knowledge as a point of view on the field and cropping systems working. The formalisations of the STICS crop model presented in this book can be considered as references used in the framework of crop sciences. The book arrangement relies on the way the model designs the crop-soil system functioning, each chapter being devoted to a set of important functions such as growth initiation, yield onset, water uptake, transformation of organic matter etc. One chapter deals with the cropping system and long term simulations and the final chapter is about the involvement of the user in terms of option choices and parameterization. If this book is mainly intended for scientists who use the STICS model, it can also be useful for agronomists, crop modellers, students and technicians looking for elementary formalizations of the crop-soil system functioning.
Download or read book Advances in Agricultural Machinery and Technologies written by Guangnan Chen and published by CRC Press. This book was released on 2018-03-05 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: The agricultural industry is dealing with enormous challenges across the globe, including the limited availability of arable lands and fresh water, as well as the effect of climate change. Machinery plays a crucial role in agriculture and farming systems, in order to feed the world’s growing population. In the last decade, we have witnessed major advances in agricultural machinery and technologies, particularly as manufacturers and researchers develop and apply various novel ways of automation as well as the data and information gathering and analyzing capabilities of their machinery. This book presents the state-of-the-art information on the important innovations in the agricultural and horticultural industry. It reviews and presents different novel technologies and implementation of these technologies to optimize farming processes and food production. There are four sections, each addressing a specific area of development. Section I discusses the recent development of farm machinery and technology. Section II focuses on water and irrigation engineering. Section III covers harvesting and post-harvest technology. Section IV describes computer modelling and simulation. Each section highlights current industry trends and latest research progress. This book is ideal for those working in or are associated with the fields of agriculture, agri-food chain and technology development and promotion.
Download or read book Farm Power and Mechanization for Small Farms in Sub Saharan Africa written by B. G. Sims and published by FAO. This book was released on 2006 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many previous publications on farm mechanization, draught animal power, hand tool technology, etc. have tended to be narrowly focused. The topic of farm power and mechanization also tended to be separated from the actual process of growing crops. This manual looks at putting the different sources of farm power, mechanization, machines, equipment and tools in a much broader context. Farm power requirements need to be viewed with reference to rural livelihoods and to farming systems as well as to the critical area of labour saving in HIV/AIDS-hit populations. No one particular type of technology is advocated.
Download or read book Handbook of Research on Energy Saving Technologies for Environmentally Friendly Agricultural Development written by Kharchenko, Valeriy and published by IGI Global. This book was released on 2019-07-05 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: World population growth and the related increase in the demand for food and other goods has intensified agricultural production throughout the world. Some of today's technologies are characterized by relatively low productivity and high consumption of energy resources. The Handbook of Research on Energy-Saving Technologies for Environmentally-Friendly Agricultural Development is a comprehensive research publication that provides insight into new technologies that create efficient and environmentally-friendly energy potential sufficient for the organization of industrial and social-economic activity in rural areas. Highlighting a variety of topics such as economic development, renewable energy, and climate change, this book is ideal for agricultural business executives, engineers, scientists, environmentalists, entrepreneurs, academicians, researchers, students, and those working in the agro-industrial and housing and communal services sectors.
Download or read book Agricultural Mechanization and Automation Volume II written by Paul McNulty and published by EOLSS Publications. This book was released on 2009-07-23 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agricultural Mechanization and Automation is a component of Encyclopedia of Food and Agricultural Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The mechanization of farming practices throughout the world has revolutionized food production, enabling it to maintain pace with population growth except in some less-developed countries, most notably in Africa. Agricultural mechanization has involved the partial or full replacement of human energy and animal-powered equipment (e.g. plows, seeders and harvesters) by engine-driven equipment. The theme on Agricultural Mechanization and Automation cover six main topics: Technology and Power in Agriculture; Farm Machinery; Facilities and Equipment for Livestock Management; Environmental Monitoring; Recovery and Use of Wastes and by-Products; Slaughtering and Processing of Livestock, which are then expanded into multiple subtopics, each as a chapter. These two volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs
Download or read book Mechanization for Rural Development written by Josef Kienzle and published by Food & Agriculture Organization of the UN (FAO). This book was released on 2013 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication gives a wide-ranging perspective on the present state of mechanization in the developing world, and, as such, constitutes a solid platform on which to build strategies for a sustainable future. Farm mechanization forms an integral plank in the implementation of sustainable crop production intensification methodologies and sustainable intensification necessarily means that the protection of natural resources and the production of ecosystem services go hand-in-hand with intensified production practices. This requires specific mechanization measures to allow crops to be established with minimum soil disturbance, to allow the soil to be protected under organic cover for as long as possible, and to establish crop rotations and associations to feed the soil and to exploit crop nutrients from various soil horizons. This work is the starting point to help the reader understand the complexities and requirements of the task ahead.
Download or read book The Literature of Agricultural Engineering written by Carl W. Hall and published by Cornell University Press. This book was released on 1992 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of a seven-volume series, The Literature of the Agricultural Sciences, this book analyzes the trends in published literature of agricultural engineering during the past century with emphasis on the last forty years. It uses citation analysis and other bibliometric techniques to identify the most important journals, report series, and monographs for the developed countries as well as those in the Third World.
Download or read book Managing Soils and Terrestrial Systems written by Brian D. Fath and published by CRC Press. This book was released on 2020-07-29 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing together a wealth of knowledge, Environmental Management Handbook, Second Edition, gives a comprehensive overview of environmental problems, their sources, their assessment, and their solutions. Through in-depth entries and a topical table of contents, readers will quickly find answers to questions about environmental problems and their corresponding management issues. This six-volume set is a reimagining of the award-winning Encyclopedia of Environmental Management, published in 2013, and features insights from more than 400 contributors, all experts in their field. The experience, evidence, methods, and models used in studying environmental management are presented here in six stand-alone volumes, arranged along the major environmental systems. Features The first handbook that demonstrates the key processes and provisions for enhancing environmental management Addresses new and cutting-edge topics on ecosystem services, resilience, sustainability, food–energy–water nexus, socio-ecological systems, and more Provides an excellent basic knowledge on environmental systems, explains how these systems function, and offers strategies on how to best manage them Includes the most important problems and solutions facing environmental management today In this third volume, Managing Soils and Terrestrial Systems, the general concepts and processes of the geosphere with its related soil and terrestrial systems are introduced. It explains how these systems function and provides strategies on how to best manage them. It serves as an excellent resource for finding basic knowledge on the geosphere systems and includes important problems and solutions that environmental managers face today. This book practically demonstrates the key processes, methods, and models used in studying environmental management.
Download or read book Encyclopedia of Environmental Management Four Volume Set written by Sven Erik Jorgensen and published by CRC Press. This book was released on 2012-12-13 with total page 3513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of an Outstanding Academic Title Award from CHOICE Magazine Encyclopedia of Environmental Management gives a comprehensive overview of environmental problems, their sources, their assessment, and their solutions. Through in-depth entries and a topical table of contents, readers will quickly find answers to questions about specific pollution and management issues. Edited by the esteemed Sven Erik Jørgensen and an advisory board of renowned specialists, this four-volume set shares insights from more than 500 contributors—all experts in their fields. The encyclopedia provides basic knowledge for an integrated and ecologically sound management system. Nearly 400 alphabetical entries cover everything from air, soil, and water pollution to agriculture, energy, global pollution, toxic substances, and general pollution problems. Using a topical table of contents, readers can also search for entries according to the type of problem and the methodology. This allows readers to see the overall picture at a glance and find answers to the core questions: What is the pollution problem, and what are its sources? What is the "big picture," or what background knowledge do we need? How can we diagnose the problem, both qualitatively and quantitatively, using monitoring and ecological models, indicators, and services? How can we solve the problem with environmental technology, ecotechnology, cleaner technology, and environmental legislation? How do we address the problem as part of an integrated management strategy? This accessible encyclopedia examines the entire spectrum of tools available for environmental management. An indispensable resource, it guides environmental managers to find the best possible solutions to the myriad pollution problems they face. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact us to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367 / (email) [email protected] International: (Tel) +44 (0) 20 7017 6062 / (email) [email protected]
Download or read book XV International Scientific Conference INTERAGROMASH 2022 written by Alexey Beskopylny and published by Springer Nature. This book was released on 2023-02-24 with total page 3148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains proceedings of the XV International Scientific Conference INTERAGROMASH 2022, Rostov-on-Don, Russia. This conference is dedicated to the innovations in the field of precision agriculture, robotics and machines, as well as agriculture biotechnologies and soil management. It is a collection of original and fundamental research in such areas as follows: unmanned aerial systems, satellite-based applications, proximal and remote sensing of soil and crop, positioning systems, geostatistics, mapping and spatial data analysis, robotics, and automation. Potential and prospects for the use of hydrogen in agriculture, for example, in high-performance tractors with hybrid electric transmission, are disclosed in the research works of scientists from all over the world. It also includes such topics as precision horticulture, precision crop protection, differential harvest, precision livestock farming, controlling environment in animal husbandry, and other topics. One of the important issues raised in the book is to ensure the autonomy of local farms. The topic of the impact of the agro-industrial sector on the environment also received wide coverage. Ways to reduce the burden on the environment are proposed, and the use of alternative fuels and fertilizers is suggested. The research results presented in this book cover the experience and the latest studies on the sustainable functioning of agribusiness in several climatic zones. The tundra and taiga, forest-steppe, the steppe and semi-desert—all this is a unique and incredibly demanded bank of information, the main value of which is the real experience of the functioning of agribusiness in difficult climatic and geographic conditions. These materials are of interest for professionals and practitioners, for researchers, scholars, and producers. They are used in the educational process at specific agricultural universities or during vocational training at enterprises and also become an indispensable helper to farm managers in making the best agronomic decisions.
Download or read book Agricultural Automation written by Qin Zhang and published by CRC Press. This book was released on 2016-04-19 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Agricultural automation is the core technology for computer-aided agricultural production management and implementation. An integration of equipment, infotronics, and precision farming technologies, it creates viable solutions for challenges facing the food, fiber, feed, and fuel needs of the human race now and into the future. Agricultural Automat
Download or read book Crop Ecology written by David J. Connor and published by Cambridge University Press. This book was released on 2011-04-28 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food security and environmental conservation are two of the greatest challenges facing the world today. It is predicted that food production must increase by at least 70% before 2050 to support continued population growth, though the size of the world's agricultural area will remain essentially unchanged. This updated and thoroughly revised second edition provides in-depth coverage of the impact of environmental conditions and management on crops, resource requirements for productivity and effects on soil resources. The approach is explanatory and integrative, with a firm basis in environmental physics, soils, physiology and morphology. System concepts are explored in detail throughout the book, giving emphasis to quantitative approaches, management strategies and tactics employed by farmers, and associated environmental issues. Drawing on key examples and highlighting the role of science, technology and economic conditions in determining management strategies, this book is suitable for agriculturalists, ecologists and environmental scientists.
Download or read book Annual Review of Low carbon Development in China written by Ye Qi and published by World Scientific. This book was released on 2013 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the midst of global economic development, the world is rapidly running out of resources. It is imperative that the level of carbon emissions be addressed by countries globally. This is especially so in China, where industrialization, city development and progressive agriculture have developed substantially. This comprehensive and integrated annual review volume sets the precedent in addressing this issue by being the pioneering volume on China''s low-carbon development efforts, based on research efforts conducted by the Climate Policy Initiative at Tsinghua OCo an independent, experienced and professional research group.Several key questions on the results of China''s 11th Five-Year plan are explored by reviewing China''s performance against targets, while key policies and institutions that were designed and implemented are described. With a focus on the effectiveness of low-carbon development policies in China during the period of 2005OCo2008 and a look at detailed key indicators of low-carbon development such as energy consumption, CO 2 emission and low-carbon technologies, the Annual Review of Low-carbon Development in China offers some insights and questions to consider as China works to meet the future through 2020."
