Download or read book Energy Harvesting with Piezoelectric and Pyroelectric Materials written by Nantakan Muensit and published by Trans Tech Publications Ltd. This book was released on 2011-02-21 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). The purpose of this book is to present the current state of knowledge in the field of energy harvesting using piezoelectric and pyroelectric materials. The book is addressed to students and academics engaged in research in the fields of energy harvesting, material sciences and engineering. Scientists and engineers who are working in the area of energy conservation and renewable energy resources should find it useful as well. Explanations of fundamental physical properties such as piezoelectricity and pyroelectricity are included to aid the understanding of the non-specialist. Specific technologies and particular applications are also presented. This book is divided into two parts, each subdivided into chapters. Part I concerns fundamentals. Chapter 1 reports the discoveries, standard issues and various materials involved with energy harvesting. Chapter 2 presents electromechanical models enabling an understanding of how energy harvesting systems behave. The vibration theory and designs for various piezoelectric energy harvesting structures are addressed in Chapter 3. Chapter 4 describes the analytical expressions for the energy flow in piezoelectric energy harvesting systems, in particular, with cymbal and flexible transducers. A description of the conversion enhancement for powering low-energy consumption devices is presented in Chapter 5. Part II concerns Applications and Case Studies. It begins with Chapter 6, in which the principles and applications of piezoelectric nanogenerators are reported. Chapter 7 describes the utilization of energy harvesting from low-frequency energy sources. There are more ways to use vibrational energy than waste heat. However, Chapter 8 presents the fundamentals of an important application of heat conversion with a copolymer. Finally, commercial energy harvesting products and a technological forecast are provided in Chapter 9.
Download or read book Piezoelectric Energy Harvesting written by Alper Erturk and published by John Wiley & Sons. This book was released on 2011-04-04 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transformation of vibrations into electric energy through the use of piezoelectric devices is an exciting and rapidly developing area of research with a widening range of applications constantly materialising. With Piezoelectric Energy Harvesting, world-leading researchers provide a timely and comprehensive coverage of the electromechanical modelling and applications of piezoelectric energy harvesters. They present principal modelling approaches, synthesizing fundamental material related to mechanical, aerospace, civil, electrical and materials engineering disciplines for vibration-based energy harvesting using piezoelectric transduction. Piezoelectric Energy Harvesting provides the first comprehensive treatment of distributed-parameter electromechanical modelling for piezoelectric energy harvesting with extensive case studies including experimental validations, and is the first book to address modelling of various forms of excitation in piezoelectric energy harvesting, ranging from airflow excitation to moving loads, thus ensuring its relevance to engineers in fields as disparate as aerospace engineering and civil engineering. Coverage includes: Analytical and approximate analytical distributed-parameter electromechanical models with illustrative theoretical case studies as well as extensive experimental validations Several problems of piezoelectric energy harvesting ranging from simple harmonic excitation to random vibrations Details of introducing and modelling piezoelectric coupling for various problems Modelling and exploiting nonlinear dynamics for performance enhancement, supported with experimental verifications Applications ranging from moving load excitation of slender bridges to airflow excitation of aeroelastic sections A review of standard nonlinear energy harvesting circuits with modelling aspects.
Download or read book Ferroelectric Materials for Energy Applications written by Haitao Huang and published by John Wiley & Sons. This book was released on 2019-01-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive overview of the emerging applications of ferroelectric materials in energy harvesting and storage Conventional ferroelectric materials are normally used in sensors and actuators, memory devices, and field effect transistors, etc. Recent progress in this area showed that ferroelectric materials can harvest energy from multiple sources including mechanical energy, thermal fluctuations, and light. This book gives a complete summary of the novel energy-related applications of ferroelectric materials?and reviews both the recent advances as well as the future perspectives in this field. Beginning with the fundamentals of ferroelectric materials, Ferroelectric Materials for Energy Applications offers in-depth chapter coverage of: piezoelectric energy generation; ferroelectric photovoltaics; organic-inorganic hybrid perovskites for solar energy conversion; ferroelectric ceramics and thin films in electric energy storage; ferroelectric polymer composites in electric energy storage; pyroelectric energy harvesting; ferroelectrics in electrocaloric cooling; ferroelectric in photocatalysis; and first-principles calculations on ferroelectrics for energy applications. -Covers a highly application-oriented subject with great potential for energy conversion and storage applications. -Focused toward a large, interdisciplinary group consisting of material scientists, solid state physicists, engineering scientists, and industrial researchers -Edited by the "father of integrated ferroelectrics" Ferroelectric Materials for Energy Applications is an excellent book for researchers working on ferroelectric materials and energy materials, as well as engineers looking to broaden their view of the field.
Download or read book Piezoelectric Energy Harvesting written by Mohammad Adnan Ilyas and published by Momentum Press. This book was released on 2018-03-22 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental pollution has been one of the main challenges for sustainable development. Piezoelectric materials can be used as a means of transforming ambient vibrations into electrical energy to power devices. The focus is on an alternative approach to scavenge energy from the environment. This book presents harvesting methodologies to evaluate the potential effectiveness of different techniques and provides an overview of the methods and challenges of harvesting energy using piezoelectric materials. Piezoelectric energy harvesters have many applications, including sensor nodes, wireless communication, microelectromechanical systems, handheld devices, and mobile devices. The book also presents a new approach within piezoelectric energy harvesting using the impact of raindrops. The energy-harvesting model presented is further analyzed for single-unit harvester and an array of multiple harvesters to maximize the efficiency of the device.
Download or read book Waste Energy Harvesting written by Ling Bing Kong and published by Springer Science & Business Media. This book was released on 2014-03-25 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Energy Harvesting overviews the latest progress in waste energy harvesting technologies, with specific focusing on waste thermal mechanical energies. Thermal energy harvesting technologies include thermoelectric effect, storage through phase change materials and pyroelectric effect. Waste mechanical energy harvesting technologies include piezoelectric (ferroelectric) effect with ferroelectric materials and nanogenerators. The book aims to strengthen the syllabus in energy, materials and physics and is well suitable for students and professionals in the fields.
Download or read book Power Maximization for Pyroelectric Piezoelectric and Hybrid Energy Harvesting written by Murtadha A. Shaheen and published by . This book was released on 2016 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this dissertation consists of improving the efficiency of energy harvesting using pyroelectric and piezoelectric materials in a system by the proper characterization of electrical parameters, widening frequency, and coupling of both effects with the appropriate parameters. A new simple stand-alone method of characterizing the impedance of a pyroelectric cell has been demonstrated. This method utilizes a Pyroelectric single pole low pass filter technique, PSLPF. Utilizing the properties of a PSLPF, where a known input voltage is applied and capacitance Cp and resistance Rp can be calculated at a frequency of 1 mHz to 1 Hz. This method demonstrates that for pyroelectric materials the impedance depends on two major factors: average working temperature, and the heating rate. Design and implementation of a hybrid approach using multiple piezoelectric cantilevers is presented. This is done to achieve mechanical and electrical tuning, along with bandwidth widening. In addition, a hybrid tuning technique with an improved adjusting capacitor method was applied. An toroid inductor of 700 mH is shunted in to the load resistance and shunt capacitance. Results show an extended frequency range up to 12 resonance frequencies (300% improvement) with improved power up to 197%. Finally, a hybrid piezoelectric and pyroelectric system is designed and tested. Using a voltage doubler, circuit for rectifying and collecting pyroelectric and piezoelectric voltages individually is proposed. The investigation showed that the hybrid energy is possible using the voltage doubler circuit from two independent sources for pyroelectrictity and piezoelectricity due to marked differences of optimal performance.
Download or read book Pyroelectric Materials written by Ashok K. Batra and published by SPIE-International Society for Optical Engineering. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains comprehensive cutting-edge information on pyroelectric materials and their preparation, properties and applications, such as uncooled wideband infrared detectors, particle generators and ambient energy harvesters. The complete lifecycle of a pyroelectric material is presented - from the theory of operation, to structure and processing and applications - providing a cohesive overview of all of the necessary concepts, including theoretical background and current developments.
Download or read book Design Fabrication and Testing of Piezoelectric Energy Harvesters written by Ashok K. Batra and published by . This book was released on 2018 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Spotlight describes the configurations and performance optimization of piezoelectric energy harvesters. It presents in detail all of the relevant parameters to test the performance of piezoelectric and pyroelectric energy harvesters, including the latest measurement techniques. The specifications of state-of-the-art instruments are included. The text serves as a step-by-step instruction manual that will help readers to set up their own laboratory to design, characterize, and analyze the performance of energy harvesters. LabVIEW software is utilized to control instruments and acquire data from a piezoelectric energy harvester test station.
Download or read book Hybrid Piezo pyroelectric Energy Harvesting from Pavement written by Jie Hu (Civil engineer) and published by . This book was released on 2016 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the U.S., there are over 4 million miles (6 million km) of roadways and more than 250 million registered vehicles. The energy lost in the pavement system due to traffic-induced vibration and deformation is enormous. If effectively harvested, such waste energy can serve as an alternative sustainable energy source that can be easily integrated to the transportation system. To harness this forms of energy, the common approach is to utilize a piezoelectric module, which generates electricity when strained. In this thesis, literature review based on different energy harvesting methods has been made.The potential of PVDF, which is a piezoelectric as well as pyroelectric polymer material, is investigated as a potential piezoelectric energy harvester integrated in pavement systems. However, the potential of PVDF as a hybrid piezo-pyroelectric energy harvester has been seldom studied. Through series of well controlled experiments, it is found that there exists interesting coupling phenomenon between piezoelectric and pyroelectric effects of PVDF: the voltage generated by simultaneous mechanical and thermal stimulations is the sum of voltages generated by separate stimulations. In addition, an estimation of power generation through piezoelectric and pyroelectric effect is conducted. The overall effects of temperature on hybrid piezo-pyroelectric energy harvesting piezo and pyro constant varies with temperature are discussed in the end.
Download or read book Modern Piezoelectric Energy Harvesting Materials written by Christopher R. Bowen and published by Springer. This book was released on 2016-03-09 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the topic of vibration energy harvesting using piezoelectric materials. Piezoelectric materials are analyzed in the context of their electromechanical coupling, heterogeneity, microgeometry and interrelations between electromechanical properties. Piezoelectric ceramics and composites based on ferroelectrics are advanced materials that are suitable for harvesting mechanical energy from vibrations using inertial energy harvesting which relies on the resistance of a mass to acceleration and kinematic energy harvesting which couples the energy harvester to the relative movement of different parts of a source. In addition to piezoelectric materials, research efforts to develop optimization methods for complex piezoelectric energy harvesters are also reviewed. The book is important for specialists in the field of modern advanced materials and will stimulate new effective piezotechnical applications.
Download or read book Ferroelectric Materials for Energy Harvesting and Storage written by Deepam Maurya and published by Woodhead Publishing. This book was released on 2020-10-14 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to more efficiently harvest energy for electronics has spurred investigation into materials that can harvest energy from locally abundant sources. Ferroelectric Materials for Energy Harvesting and Storage is the first book to bring together fundamental mechanisms for harvesting various abundant energy sources using ferroelectric and piezoelectric materials. The authors discuss strategies of designing materials for efficiently harvesting energy sources like solar, wind, wave, temperature fluctuations, mechanical vibrations, biomechanical motion, and stray magnetic fields. In addition, concepts of the high density energy storage using ferroelectric materials is explored. Ferroelectric Materials for Energy Harvesting and Storage is appropriate for those working in materials science and engineering, physics, chemistry and electrical engineering disciplines. Reviews wide range of energy harvesting including solar, wind, biomechanical and more Discusses ferroelectric materials and their application to high energy density capacitors Includes review of fundamental mechanisms of energy harvesting and energy solutions, their design and current applications, and future trends and challenges
Download or read book Pyroelectric Materials written by Ashim Kumar Bain and published by John Wiley & Sons. This book was released on 2022-11-21 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pyroelectric Materials An authoritative and practical discussion of pyroelectric materials and their applications In Pyroelectric Materials: Physics and Applications, the authors deliver a comprehensive exploration of the physics of pyroelectric materials and their applications. With authoritative coverage of a wide variety of critical topics in the field, the authors provide the readers with chapters on dielectric fundamentals, pyroelectricity, pyroelectric materials and their applications such as pyroelectric infrared detectors, pyroelectric energy harvesting, and pyroelectric fusion. Readers will also find: A thorough introduction to the fundamentals of dielectrics, including discussions of polarization, dispersion, relaxation, and the molecular theory of induced charges in a dielectric Comprehensive explorations of pyroelectricity, including its history, theory, and a simple model of pyroelectric effect Perfect for researchers and professionals with an interest in pyroelectric materials, the book is also useful for graduate students taking courses involving pyroelectric materials and their applications.
Download or read book Nanostructured Piezoelectric Energy Harvesters written by Joe Briscoe and published by Springer. This book was released on 2014-08-25 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a range of devices that use piezoelectricity to convert mechanical deformation into electrical energy and relates their output capabilities to a range of potential applications. Starting with a description of the fundamental principles and properties of piezo- and ferroelectric materials, where applications of bulk materials are well established, the book shows how nanostructures of these materials are being developed for energy harvesting applications. The authors show how a nanostructured device can be produced, and put in context some of the approaches that are being investigated for the development of nanostructured piezoelectric energy harvesting devices, also known as nanogenerators. There is growing interest in strategies for energy harvesting that use a variety of existing and well-known materials in new morphologies or architectures. A key change of morphology to enable new functionality is the nanostructuring of a material. One area of particular interest is self-powered devices based on portable energy harvesting. The charging of personal electronic equipment and other small-scale electronic devices such as sensors is a highly demanding environment that requires innovative solutions. The output of these so-called nanogenerators is explained in terms of the requirements for self-powered applications. The authors summarise the range of production methods used for nanostructured devices, which require much lower energy inputs than those used for bulk systems, making them more environmentally friendly and also compatible with a wide range of substrate materials.
Download or read book Piezoelectricity written by Savvas G. Vassiliadis and published by BoD – Books on Demand. This book was released on 2018-08-29 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientifically defined in 1880 by the Curie brothers, piezoelectricity - from the Greek piezein, meaning to press (squeeze), and ilektron, meaning amber, a material with electrostatic properties - is a phenomenon with many applications. The related piezoelectric materials have been undergoing a long-lasting evolution over the years until today. The field of organic and inorganic piezoelectric materials is continuously expanding in terms of new substances used, new structures, and new applications. The seven chapters of this book present modern aspects and technological advances in the field of piezoelectric materials and applications. To present a balanced view of the field, some chapters focus on new piezoelectric materials and structures, while others examine interesting applications of piezoelectric sensors, energy harvesters, and actuators.
Download or read book Ferroelectrics written by Mickaël Lallart and published by BoD – Books on Demand. This book was released on 2011-08-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ferroelectric materials have been and still are widely used in many applications, that have moved from sonar towards breakthrough technologies such as memories or optical devices. This book is a part of a four volume collection (covering material aspects, physical effects, characterization and modeling, and applications) and focuses on the application of ferroelectric devices to innovative systems. In particular, the use of these materials as varying capacitors, gyroscope, acoustics sensors and actuators, microgenerators and memory devices will be exposed, providing an up-to-date review of recent scientific findings and recent advances in the field of ferroelectric devices.
Download or read book Structural Health Monitoring with Piezoelectric Wafer Active Sensors written by Victor Giurgiutiu and published by Academic Press. This book was released on 2014-06-20 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Second Edition provides an authoritative theoretical and experimental guide to this fast-paced, interdisciplinary area with exciting applications across a range of industries. The book begins with a detailed yet digestible consolidation of the fundamental theory relating to structural health monitoring (SHM). Coverage of fracture and failure basics, relevant piezoelectric material properties, vibration modes in different structures, and different wave types provide all the background needed to understand SHM and apply it to real-world structural challenges. Moving from theory to experimental practice, the book then provides the most comprehensive coverage available on using piezoelectric wafer active sensors (PWAS) to detect and quantify damage in structures. Updates to this edition include circular and straight-crested Lamb waves from first principle, and the interaction between PWAS and Lamb waves in 1-D and 2-D geometries. Effective shear stress is described, and tuning expressions between PWAS and Lamb waves has been extended to cover axisymmetric geometries with a complete Hankel-transform-based derivation. New chapters have been added including hands-on SHM case studies of PWAS stress, strain, vibration, and wave sensing applications, along with new sections covering essential aspects of vibration and wave propagation in axisymmetric geometries. Comprehensive coverage of underlying theory such as piezoelectricity, vibration, and wave propagation alongside experimental techniques Includes step-by-step guidance on the use of piezoelectric wafer active sensors (PWAS) to detect and quantify damage in structures, including clear information on how to interpret sensor signal patterns Updates to this edition include a new chapter on composites and new sections on advances in vibration and wave theory, bringing this established reference in line with the cutting edge in this emerging area
Download or read book Power Harvesting Via Smart Materials written by A. K. Batra and published by SPIE-International Society for Optical Engineering. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the fundamentals, fabrication, testing, and modelling of ambient energy harvesters based on three main streams of energy-harvesting mechanisms: piezoelectrics, ferroelectrics, and pyroelectrics. It addresses their commercial and biomedical applications, as well as the latest research results.
