Download or read book Energy Efficient Embedded Video Processing Systems written by Muhammad Usman Karim Khan and published by Springer. This book was released on 2017-09-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides its readers with the means to implement energy-efficient video systems, by using different optimization approaches at multiple abstraction levels. The authors evaluate the complete video system with a motive to optimize its different software and hardware components in synergy, increase the throughput-per-watt, and address reliability issues. Subsequently, this book provides algorithmic and architectural enhancements, best practices and deployment models for new video systems, while considering new implementation paradigms of hardware accelerators, parallelism for heterogeneous multi- and many-core systems, and systems with long life-cycles. Particular emphasis is given to the current video encoding industry standard H.264/AVC, and one of the latest video encoders (High Efficiency Video Coding, HEVC).
Download or read book 3D Video Coding for Embedded Devices written by Bruno Zatt and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows readers how to develop energy-efficient algorithms and hardware architectures to enable high-definition 3D video coding on resource-constrained embedded devices. Users of the Multiview Video Coding (MVC) standard face the challenge of exploiting its 3D video-specific coding tools for increasing compression efficiency at the cost of increasing computational complexity and, consequently, the energy consumption. This book enables readers to reduce the multiview video coding energy consumption through jointly considering the algorithmic and architectural levels. Coverage includes an introduction to 3D videos and an extensive discussion of the current state-of-the-art of 3D video coding, as well as energy-efficient algorithms for 3D video coding and energy-efficient hardware architecture for 3D video coding.
Download or read book Energy Efficient VLSI Architectures for Real Time and 3D Video Processing written by Michael Stefano Fritz Schaffner and published by BoD – Books on Demand. This book was released on 2018-10-24 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiview autostereoscopic displays (MADs) make it possible to view video content in 3D without wearing special glasses, and such displays have recently become available. The main problem of MADs is that they require several (typically 8 or 9) views, while most of the 3D video content is in stereoscopic 3D today. To bridge this content-display gap, the research community started to devise automatic multiview synthesis (MVS) methods. Common MVS methods are based on depth-image-based rendering, where a dense depth map of the scene is used to reproject the image to new viewpoints. Although physically correct, this approach requires accurate depth maps and additional inpainting steps. Our work uses an alternative conversion concept based on image domain warping (IDW) which has been successfully applied to related problems such as aspect ratio retargeting for streaming video, and dispa- rity remapping for depth adjustments in stereoscopic 3D content. IDW shows promising performance in this context as it only requires robust, sparse point- correspondences and no inpainting steps. However, MVS, using IDW as well as alternative approaches, is computationally demanding and requires realtime processing - yet such methods should be portable to end-user and even mobile devices to develop their full potential. To this end, this thesis investigates efficient algorithms and hardware architectures for a variety of subproblems arising in the MVS pipeline.
Download or read book Architectural Enhancements for Color Image and Video Processing on Embedded Systems written by Jongmyon Kim and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: As emerging portable multimedia applications demand more and more computational throughput with limited energy consumption, the need for high-efficiency, high-throughput embedded processing is becoming an important challenge in computer architecture. In this regard, this dissertation addresses application-, architecture-, and technology-level issues in existing processing systems to provide efficient processing of multimedia in many, or ideally all, of its form. In particular, this dissertation explores color imaging in multimedia while focusing on two architectural enhancements for memory- and performance-hungry embedded applications: (1) a pixel-truncation technique and (2) a color-aware instruction set (CAX) for embedded multimedia systems. The pixel-truncation technique differs from previous techniques (e.g., 4:2:2 and 4:2:0 subsampling) used in image and video compression applications (e.g., JPEG and MPEG) in that it reduces the information content in individual pixel word sizes rather than in each dimension. Thus, this technique drastically reduces the bandwidth and memory required to transport and store color images without perceivable distortion in color. At the same time, it maintains the pixel storage format of color image processing in which each pixel computation is performed simultaneously on 3-D YCbCr components, which are widely used in the image and video processing community. CAX supports parallel operations on two-packed 16-bit (6:5:5) YCbCr data in a 32-bit datapath processor, providing greater concurrency and efficiency for processing color image sequences. This dissertation presents the impact of CAX on processing performance and on both area and energy efficiency for color imaging applications in three major processor architectures: dynamically scheduled (superscalar), statically scheduled (very long instruction word, VLIW), and embedded single instruction multiple data (SIMD) array processors. Unlike typical multimedia extensions, CAX obtains substantial performance and code density improvements through direct support for color data processing rather than depending solely on generic subword parallelism. In addition, the ability to reduce data format size reduces system cost. The reduction in data bandwidth also simplifies system design. In summary, CAX, coupled with the pixel-truncation technique, provides an efficient mechanism that meets the computational requirements and cost goals for future embedded multimedia products.
Download or read book Handbook of Research on Multimedia Cyber Security written by Gupta, Brij B. and published by IGI Global. This book was released on 2020-04-03 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because it makes the distribution and transmission of digital information much easier and more cost effective, multimedia has emerged as a top resource in the modern era. In spite of the opportunities that multimedia creates for businesses and companies, information sharing remains vulnerable to cyber attacks and hacking due to the open channels in which this data is being transmitted. Protecting the authenticity and confidentiality of information is a top priority for all professional fields that currently use multimedia practices for distributing digital data. The Handbook of Research on Multimedia Cyber Security provides emerging research exploring the theoretical and practical aspects of current security practices and techniques within multimedia information and assessing modern challenges. Featuring coverage on a broad range of topics such as cryptographic protocols, feature extraction, and chaotic systems, this book is ideally designed for scientists, researchers, developers, security analysts, network administrators, scholars, IT professionals, educators, and students seeking current research on developing strategies in multimedia security.
Download or read book Energy Efficient and Reliable Embedded Nanoscale SRAM Design written by Bhupendra Singh Reniwal and published by CRC Press. This book was released on 2023-11-29 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference text covers a wide spectrum for designing robust embedded memory and peripheral circuitry. It will serve as a useful text for senior undergraduate and graduate students and professionals in areas including electronics and communications engineering, electrical engineering, mechanical engineering, and aerospace engineering. Discusses low-power design methodologies for static random-access memory (SRAM) Covers radiation-hardened SRAM design for aerospace applications Focuses on various reliability issues that are faced by submicron technologies Exhibits more stable memory topologies Nanoscale technologies unveiled significant challenges to the design of energy- efficient and reliable SRAMs. This reference text investigates the impact of process variation, leakage, aging, soft errors and related reliability issues in embedded memory and periphery circuitry. The text adopts a unique way to explain the SRAM bitcell, array design, and analysis of its design parameters to meet the sub-nano-regime challenges for complementary metal-oxide semiconductor devices. It comprehensively covers low- power-design methodologies for SRAM, exhibits more stable memory topologies, and radiation-hardened SRAM design for aerospace applications. Every chapter includes a glossary, highlights, a question bank, and problems. The text will serve as a useful text for senior undergraduate students, graduate students, and professionals in areas including electronics and communications engineering, electrical engineering, mechanical engineering, and aerospace engineering. Discussing comprehensive studies of variability-induced failure mechanism in sense amplifiers and power, delay, and read yield trade-offs, this reference text will serve as a useful text for senior undergraduate, graduate students, and professionals in areas including electronics and communications engineering, electrical engineering, mechanical engineering, and aerospace engineering. It covers the development of robust SRAMs, well suited for low-power multi-core processors for wireless sensors node, battery-operated portable devices, personal health care assistants, and smart Internet of Things applications.
Download or read book System Level Design Techniques for Energy Efficient Embedded Systems written by Marcus T. Schmitz and published by Springer. This book was released on 2006-01-16 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: System-Level Design Techniques for Energy-Efficient Embedded Systems addresses the development and validation of co-synthesis techniques that allow an effective design of embedded systems with low energy dissipation. The book provides an overview of a system-level co-design flow, illustrating through examples how system performance is influenced at various steps of the flow including allocation, mapping, and scheduling. The book places special emphasis upon system-level co-synthesis techniques for architectures that contain voltage scalable processors, which can dynamically trade off between computational performance and power consumption. Throughout the book, the introduced co-synthesis techniques, which target both single-mode systems and emerging multi-mode applications, are applied to numerous benchmarks and real-life examples including a realistic smart phone.
Download or read book Energy Efficient Microprocessor Design written by Thomas D. Burd and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume starts with a description of the metrics and benchmarks used to design energy-efficient microprocessor systems, followed by energy-efficient methodologies for the architecture and circuit design, DC-DC conversion, energy-efficient software and system integration.
Download or read book Energy Efficient Hardware Software Co Synthesis Using Reconfigurable Hardware written by Jingzhao Ou and published by CRC Press. This book was released on 2009-10-14 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid energy estimation for energy efficient applications using field-programmable gate arrays (FPGAs) remains a challenging research topic. Energy dissipation and efficiency have prevented the widespread use of FPGA devices in embedded systems, where energy efficiency is a key performance metric. Helping overcome these challenges, Energy Efficient
Download or read book Applied Reconfigurable Computing written by Stephan Wong and published by Springer. This book was released on 2017-03-30 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th International Symposium on Applied Reconfigurable Computing, ARC 2017, held in Delft, The Netherlands, in April 2017. The 17 full papers and 11 short papers presented in this volume were carefully reviewed and selected from 49 submissions. They are organized in topical sections on adaptive architectures, embedded computing and security, simulation and synthesis, design space exploration, fault tolerance, FGPA-based designs, neural neworks, and languages and estimation techniques.
Download or read book Embedded and Ubiquitous Computing EUC 2005 written by Laurence T. Yang and published by Springer. This book was released on 2005-11-24 with total page 1226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Welcome to the proceedings of the 2005 IFIP International Conference on - bedded and Ubiquitous Computing (EUC 2005), which was held in Nagasaki, Japan, December 6–9, 2005. Embedded and ubiquitous computing is emerging rapidly as an exciting new paradigm to provide computing and communication services all the time, - erywhere. Its systems are now pervading every aspect of life to the point that they are hidden inside various appliances or can be worn unobtrusively as part of clothing and jewelry. This emergence is a natural outcome of research and technological advances in embedded systems, pervasive computing and c- munications, wireless networks, mobile computing, distributed computing and agent technologies, etc. Its tremendous impact on academics, industry, gove- ment, and daily life can be compared to that of electric motors over the past century, in fact it but promises to revolutionize life much more profoundly than elevators, electric motors or even personal computers. The EUC 2005 conference provided a forum for engineers and scientists in academia, industry, and government to address profound issues including te- nical challenges, safety, and social, legal, political, and economic issues, and to present and discuss their ideas, results, work in progress, and experience on all aspects of embedded and ubiquitous computing.
Download or read book Real Time Image and Video Processing written by Nasser Kehtarnavaz and published by Springer Nature. This book was released on 2022-06-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an overview of the guidelines and strategies for transitioning an image or video processing algorithm from a research environment into a real-time constrained environment. Such guidelines and strategies are scattered in the literature of various disciplines including image processing, computer engineering, and software engineering, and thus have not previously appeared in one place. By bringing these strategies into one place, the book is intended to serve the greater community of researchers, practicing engineers, industrial professionals, who are interested in taking an image or video processing algorithm from a research environment to an actual real-time implementation on a resource constrained hardware platform. These strategies consist of algorithm simplifications, hardware architectures, and software methods. Throughout the book, carefully selected representative examples from the literature are presented to illustrate the discussed concepts. After reading the book, the readers are exposed to a wide variety of techniques and tools, which they can then employ to design a real-time image or video processing system.
Download or read book Handbook of Signal Processing Systems written by Shuvra S. Bhattacharyya and published by Springer Science & Business Media. This book was released on 2013-06-20 with total page 1395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Signal Processing Systems is organized in three parts. The first part motivates representative applications that drive and apply state-of-the art methods for design and implementation of signal processing systems; the second part discusses architectures for implementing these applications; the third part focuses on compilers and simulation tools, describes models of computation and their associated design tools and methodologies. This handbook is an essential tool for professionals in many fields and researchers of all levels.
Download or read book CMOSET 2012 Abstracts written by CMOS Emerging Technologies Research and published by CMOS Emerging Technologies. This book was released on with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Embedded Computer Vision written by Branislav Kisacanin and published by Springer Science & Business Media. This book was released on 2008-09-26 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a graduate student at Ohio State in the mid-1970s, I inherited a unique c- puter vision laboratory from the doctoral research of previous students. They had designed and built an early frame-grabber to deliver digitized color video from a (very large) electronic video camera on a tripod to a mini-computer (sic) with a (huge!) disk drive—about the size of four washing machines. They had also - signed a binary image array processor and programming language, complete with a user’s guide, to facilitate designing software for this one-of-a-kindprocessor. The overall system enabled programmable real-time image processing at video rate for many operations. I had the whole lab to myself. I designed software that detected an object in the eldofview,trackeditsmovementsinrealtime,anddisplayedarunningdescription of the events in English. For example: “An object has appeared in the upper right corner...Itismovingdownandtotheleft...Nowtheobjectisgettingcloser...The object moved out of sight to the left”—about like that. The algorithms were simple, relying on a suf cient image intensity difference to separate the object from the background (a plain wall). From computer vision papers I had read, I knew that vision in general imaging conditions is much more sophisticated. But it worked, it was great fun, and I was hooked.
Download or read book Learning in Embedded Systems written by Leslie Pack Kaelbling and published by MIT Press. This book was released on 1993 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learning to perform complex action strategies is an important problem in the fields of artificial intelligence, robotics and machine learning. Presenting interesting, new experimental results, Learning in Embedded Systems explores algorithms that learn efficiently from trial and error experience with an external world. The text is a detailed exploration of the problem of learning action strategies in the context of designing embedded systems that adapt their behaviour to a complex, changing environment. Such systems include mobile robots, factory process controllers and long-term software databases.
Download or read book An Event Driven Parallel Processing Subsystem for Energy Efficient Mobile Medical Instrumentation written by Florian Stefan Glaser and published by BoD – Books on Demand. This book was released on 2022-12-02 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aging population and the thereby ever-rising cost of health services call for novel and innovative solutions for providing medical care and services. So far, medical care is primarily provided in the form of time-consuming in-person appointments with trained personnel and expensive, stationary instrumentation equipment. As for many current and past challenges, the advances in microelectronics are a crucial enabler and offer a plethora of opportunities. With key building blocks such as sensing, processing, and communication systems and circuits getting smaller, cheaper, and more energy-efficient, personal and wearable or even implantable point-of-care devices with medicalgrade instrumentation capabilities become feasible. Device size and battery lifetime are paramount for the realization of such devices. Besides integrating the required functionality into as few individual microelectronic components as possible, the energy efficiency of such is crucial to reduce battery size, usually being the dominant contributor to overall device size. In this thesis, we present two major contributions to achieve the discussed goals in the context of miniaturized medical instrumentation: First, we present a synchronization solution for embedded, parallel near-threshold computing (NTC), a promising concept for enabling the required processing capabilities with an energy efficiency that is suitable for highly mobile devices with very limited battery capacity. Our proposed solution aims at increasing energy efficiency and performance for parallel NTC clusters by maximizing the effective utilization of the available cores under parallel workloads. We describe a hardware unit that enables fine-grain parallelization by greatly optimizing and accelerating core-to-core synchronization and communication and analyze the impact of those mechanisms on the overall performance and energy efficiency of an eight-core cluster. With a range of digital signal processing (DSP) applications typical for the targeted systems, the proposed hardware unit improves performance by up to 92% and 23% on average and energy efficiency by up to 98% and 39% on average. In the second part, we present a MCU processing and control subsystem (MPCS) for the integration into VivoSoC, a highly versatile single-chip solution for mobile medical instrumentation. In addition to the MPCS, it includes a multitude of analog front-ends (AFEs) and a multi-channel power management IC (PMIC) for voltage conversion. ...
