Download or read book Employing Chemical Processes as Grid level Energy Storage Devices written by Joannah Igbe Otashu and published by . This book was released on 2020 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliable operation of the electric grid which comprises of instantaneously matching electricity demand and supply is a tier one security concern and has received increased attention in recent years. This is a challenging task as both electricity demand and supply are characterized by variability and uncertainty; the volatility on the supply end originating from increased integration of renewable energy in power generation. Electricity demand typically peaks in the late afternoons whereas wind and solar generation peak in the early mornings and mid-day respectively. To reconcile this electricity supply and demand mismatch, energy storage is employed for storing excess power generated during off-peak demand periods. Correspondingly, stored power is discharged during peak electricity demand hours. Electricity storage is however presently expensive and current grid storage devices are insufficient to ensure reliable electric grid operation. Standby generators with fast ramp rates which are generally more expensive to run are also employed when needed. A solution to this problem involves motivating end-users of electricity to modify their demand patterns in manner that enhances grid stability. This activity, referred to as demand response (DR) can help relieve the strain on the grid by tailoring end-user power consumption to match the time varying supply of electricity. Chemical industries that are power-intensive can provide valuable DR as they represent localized grid loads with end products that are generally easier and cheaper to store compared to electricity. These industries can ramp production during off-peak power demand hours storing excess product and reduce production rates when power demand peaks while depleting inventory to meet any required product demand. However, the operation of chemical industries are subject to strict constraints including; economic (e.g., reliable product delivery), feasibility (e.g., limits on process variables) or safety concerns. Additionally, the dynamics of chemical processes are typically described by high-order non-linear models and ramp rates and capacity limits alone, which are typically employed on the grid side to manage demand response activities, are not sufficient to characterize the transient nature of chemical processes. In this dissertation, we employ modeling techniques and production scheduling to evaluate the provision of demand response by chemical industries in highly volatile electricity markets. We develop and illustrate the use of suitable dynamic models to represent the chemical plant operation while providing fast-paced DR. As fast DR contribute significantly to the solution pool available for handling power grid contingencies, this study will aid the smoother deployment of industrial chemical loads as grid support devices while ensuring safe and feasible operation of the chemical plant

Download or read book Advances in Energy Systems Engineering written by Georgios M. Kopanos and published by Springer. This book was released on 2016-10-17 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a scientific framework for integrated solutions to complex energy problems. It adopts a holistic, systems-based approach to demonstrate the potential of an energy systems engineering approach to systematically quantify different options at various levels of complexity (technology, plant, energy supply chain, mega-system). Utilizing modeling, simulation and optimization-based frameworks, along with a number of real-life applications, it focuses on advanced energy systems including energy supply chains, integrated biorefineries, energy planning and scheduling approaches and urban energy systems. Featuring contributions from leading researchers in the field, this work is useful for academics, researchers, industry practitioners in energy systems engineering, and all those who are involved in model-based energy systems.

Download or read book Handbook on Battery Energy Storage System written by Asian Development Bank and published by Asian Development Bank. This book was released on 2018-12-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook serves as a guide to deploying battery energy storage technologies, specifically for distributed energy resources and flexibility resources. Battery energy storage technology is the most promising, rapidly developed technology as it provides higher efficiency and ease of control. With energy transition through decarbonization and decentralization, energy storage plays a significant role to enhance grid efficiency by alleviating volatility from demand and supply. Energy storage also contributes to the grid integration of renewable energy and promotion of microgrid.

Download or read book Combined Scheduling and Control written by John D. Hedengren and published by MDPI. This book was released on 2018-04-13 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Combined Scheduling and Control" that was published in Processes

Download or read book Energy Storage Technologies in Grid Modernization written by Sandeep Dhundhara and published by John Wiley & Sons. This book was released on 2023-06-26 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: ENERGY STORAGE TECHNOLOGIES IN GRID MODERNIZATION Written and edited by a team of experts, this exciting new volume discusses the various types of energy storage technologies, the applications of energy storage systems, their role in the real-time operation of power markets, and the operational issues of modern power systems, including renewable-based generating sources. The worldwide energy sector, specifically power generation, has undergone a huge transformation in recent years, and the focus is to make it sustainable, environmentally friendly, reliable, and highly efficient. As a result, a significant share of highly intermittent but clean renewable sources is being integrated into the power system using advanced technological components. The higher penetration level of renewable energy sources (RESs) has increased the active power generation share in the grid but reduced the total rotating system inertia. This high reduction in inertia brings new challenges and technical issues to the operators of modern power systems and impacts the stability and security of the grid. The stochasticity of these renewable sources also poses a big challenge to the efficient operation of the power system. Electrical energy storage systems help to manage such issues and challenges that occur due to the intermittent nature of RES and can play a big role in the smooth and reliable operation of the power system. The applications and opportunities to use storage on the grid are growing due to the improvements in energy storage technologies, and flexible regulatory frameworks. Technological developments have made it possible to use batteries and other Energy Storage Systems (ESSs) for managing the operation of the power system. This book aims to illustrate the potential of energy storage systems in different applications of the modern power system considering recent advances and research trends in storage technologies. These areas are going to play a very significant role in future smart grid operations. This book discusses the various types of energy storage technologies and promotes the applications of ESSs in the performance improvement of modern power systems. Whether for the veteran engineer, new hire, or student, it is a must-have for any library.

Download or read book Electrically Charged Thermal Energy Storage Systems for Grid level Electricity Storage written by Laureen Meroueh and published by . This book was released on 2018 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike most other commodities, electricity produced at any given time must match the electricity being consumed or the stability of the electric grid is jeopardized. Electricity demand changes throughout the day result in required generation ramp-ups that strain power plants, reduce cycle efficiency and increase CO2 emissions. This problem is exacerbated when renewable sources such as wind and solar are integrated into the grid, due to their intermittency. A change in methods of energy production globally that allows synergistic coupling of renewable and fossil fuels is needed. Currently, pumped hydroelectric and compressed air energy storage are the two most common methods of storage, but are highly geographic dependent systems and thus of limited applicability. There exists a strong demand for grid-scale energy storage that are cost-effective and without geographic constraints. In this thesis, storage systems that are charged by electricity and discharged to produce electricity at times of high demand, are theoretically evaluated. Various types of storage such as chemical, thermal, and mechanical, are reviewed to determine the most ideal method for grid-level energy storage. Thermal energy storage systems using phase change materials are most attractive on a cost and energy density basis. Two system designs are evaluated that can couple to both existing and future power plants since they are electrically charged, via joule heating for example, and later discharged to produce electricity using the plant's turbomachinery. Described within is a novel system in which silicon is used as the storage medium and energy release is predominantly through radiative heat transfer. Another design based on the eutectic alloy Al0.88 Si0.12 and other sensible energy storage materials is also evaluated. As an example, the energy storage systems are coupled to a power plant operating according to a supercritical Rankin cycle, and their performance is compared to that of a boiler. Additionally, system cost is compared to existing storage technologies. Although storing electricity as heat and back to electricity is thermodynamically unfavorable, we present an analysis to show that this approach can be cost competitive and provides a segue from fossil fuels to renewable energy.

Download or read book Energy Storage Devices written by M. Taha Demirkan and published by BoD – Books on Demand. This book was released on 2019-12-18 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy storage will be a very important part of the near future, and its effectiveness will be crucial for most future technologies. Energy can be stored in several different ways and these differ in terms of the type and the conversion method of the energy. Among those methods; chemical, mechanical, and thermal energy storage are some of the most favorable methods for containing energy. Current energy storage devices are still far from meeting the demands of new technological developments. Therefore, much effort has been put to improving the performance of different types of energy storage technologies in the last few decades.

Download or read book Electrochemical Energy Storage for Renewable Sources and Grid Balancing written by Patrick T. Moseley and published by Newnes. This book was released on 2014-10-27 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity from renewable sources of energy is plagued by fluctuations (due to variations in wind strength or the intensity of insolation) resulting in a lack of stability if the energy supplied from such sources is used in ‘real time’. An important solution to this problem is to store the energy electrochemically (in a secondary battery or in hydrogen and its derivatives) and to make use of it in a controlled fashion at some time after it has been initially gathered and stored. Electrochemical battery storage systems are the major technologies for decentralized storage systems and hydrogen is the only solution for long-term storage systems to provide energy during extended periods of low wind speeds or solar insolation. Future electricity grid design has to include storage systems as a major component for grid stability and for security of supply. The technology of systems designed to achieve this regulation of the supply of renewable energy, and a survey of the markets that they will serve, is the subject of this book. It includes economic aspects to guide the development of technology in the right direction. Provides state-of-the-art information on all of the storage systems together with an assessment of competing technologies Features detailed technical, economic and environmental impact information of different storage systems Contains information about the challenges that must be faced for batteries and hydrogen-storage to be used in conjunction with a fluctuating (renewable energy) power supply

Download or read book Principles of Energy Storage Systems written by Puthalpet Jayarama Reddy and published by BSP Books . This book was released on with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy storage is central for the entire grid, improving resources from wind, solar and hydro to nuclear and fossil fuels, to demand side resources and system efficiency benefits. Energy storage can be performed as a generation, transmission, or distribution asset, and times in a single asset. Energy storage is an enabling technology. When the sun isn't shining or the wind isn't blowing, energy storage can support. When demand shifts and baseload resources can't react quickly enough, again energy storage can support. It saves consumer cost, improves reliability and resilience, integrates generation sources, and helps reduce environmental impacts. This book discusses these aspects while comprehensively covering several energy storage technologies in operation and the ones under demonstration and development. Numerous references are cited for the reader to hunt for more details and if interested in research further. It serves as a text/reference book for students and as a manual for those in the industry and for policy makers. About the Energy Storage: United Nation's Secretary-general António Gueterres, speaking at the launch of the World Meteorological Organization's state of the global climate report on 18th may 2022, said: “First, renewable energy technologies, such as battery storage, must be treated as essential and freely available global public goods. Removing obstacles to knowledge sharing and technological transfer is crucial for a rapid and fair renewable energy transition. Storing renewable electricity is often cited as the greatest barrier to the clean energy transition. I am therefore calling for a global coalition on battery storage to fast-track innovation and deployment – a coalition led and driven by governments, bringing together tech companies, manufacturers, and financiers.” “VRE resources such as wind and solar depend on daily and seasonal variations and weather fluctuations; they aren't always available to be dispatched to follow electricity demand……. Energy storage can help VRE-dominated electricity systems balance electricity supply and demand while maintaining reliability in a cost-effective manner….” Says MIT Energy Initiative Director Robert Armstrong, Chevron Professor of Chemical Engineering and chair of the Future of Energy Storage study. The MIT Energy Initiative report confirms that energy storage makes deep decarbonization of reliable electric power systems affordable. “There is no better solution to achieve energy security at present other than the solar and wind energy solutions, coupled with storage systems such as batteries and pumps…….” Says Ajay Mathur, Director General of International Solar Alliance.

Download or read book Energy Harvesting and Storage Devices written by Laxman Raju Thoutam and published by CRC Press. This book was released on 2023-11-29 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book discusses the materials, devices, and methodologies that can be used for energy harvesting including advanced materials, devices, and systems. It describes synthesis and fabrication details of energy storage materials. It explains use of high-energy density thin films for future power systems, flexible and biodegradable energy storage devices, fuel cells and supercapacitors, nanogenerators for self-powered systems, and innovative energy harvesting methodologies. Features: Covers all relevant topics in energy harvesting research and focuses on the current state-of-the-art techniques and materials for this application. Showcases the true potential of the nature in energy harvesting industry by discussing various harvesting mechanisms based on renewable and sustainable energy sources. Explains the recent trends in flexible and wearable energy storage devices that are currently being used in IoT-based smart devices. Overviews of the state-of-the-art research performed on design and development of energy harvesting devices. Highlights the interdisciplinary research efforts needed in energy harvesting and storage devices to transform conceptual ideas to working prototypes. This book is aimed at graduate students and researchers in emerging materials, energy engineering, including harvesting and storage.

Download or read book 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2015-07-14 with total page 2667 pages. Available in PDF, EPUB and Kindle. Book excerpt: 25th European Symposium on Computer-Aided Process Engineering contains the papers presented at the 12th Process Systems Engineering (PSE) and 25th European Society of Computer Aided Process Engineering (ESCAPE) Joint Event held in Copenhagen, Denmark, 31 May - 4 June 2015. The purpose of these series is to bring together the international community of researchers and engineers who are interested in computing-based methods in process engineering. This conference highlights the contributions of the PSE/CAPE community towards the sustainability of modern society. Contributors from academia and industry establish the core products of PSE/CAPE, define the new and changing scope of our results, and future challenges. Plenary and keynote lectures discuss real-world challenges (globalization, energy, environment, and health) and contribute to discussions on the widening scope of PSE/CAPE versus the consolidation of the core topics of PSE/CAPE. Highlights how the Process Systems Engineering/Computer-Aided Process Engineering community contributes to the sustainability of modern society Presents findings and discussions from both the 12th Process Systems Engineering (PSE) and 25th European Society of Computer-Aided Process Engineering (ESCAPE) Events Establishes the core products of Process Systems Engineering/Computer Aided Process Engineering Defines the future challenges of the Process Systems Engineering/Computer Aided Process Engineering community

Download or read book Grid Converters for Photovoltaic and Wind Power Systems written by Remus Teodorescu and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters

Download or read book Future Grid Scale Energy Storage Solutions written by Ahmad Arabkoohsar and published by Elsevier. This book was released on 2023-03-25 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a detailed understanding of why heat and electricity energy storage technologies have developed so rapidly, Future Grid-Scale Energy Storage Solutions: Mechanical and Chemical Technologies and Principles presents the required fundamentals for techno-economic and environmental analysis of various grid-scale energy storage technologies. Through a consistent framework, each chapter outlines state-of-the-art advances, benefits and challenges, energy and exergy analyses models of these technologies, as well as an elaboration on their performance under dynamic and off-design operating conditions. Chapters include a case study analysis section, giving a detailed understanding of the systems’ thermodynamics and economic and environmental performance in real operational conditions, and wrap-up with a discussion of the future prospects of these technologies from commercial and research perspectives. This book is a highly beneficial reference for researchers and scientists dealing with grid-scale energy storage systems, as a single comprehensive book providing the information and fundamentals required to do modeling, analysis, and/or feasibility studies of such systems. Features all the major mechanical and chemical energy storage systems, including electricity and thermal energy storage methods Includes step-by-step energy and exergy modeling, including off-design performance modeling Provides future perspectives for technologies, describing how they will contribute to the future smart energy systems

Download or read book Introduction to Architectural Science written by Steven V. Szokolay and published by Routledge. This book was released on 2014-04-11 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its third edition, this book provides the ideal and only reference to the physical basis of architectural design. Fully updated and expanded throughout, the book provides the data required for architects to design buildings that will maintain the users comfort in a variety of conditions, with minimal reliance on energy intensive methods like air conditioning. This is not a ‘how to’ book but answers the question why. It equips the reader with the tools to realize the full potential of the good intentions of sustainable, bioclimatic design. All sections have been revised and updated for this third edition including all the most relevant developments affecting heat, light and sound controls. The book responds to the need of understanding beyond ‘rules of thumb’.

Download or read book Sustainable Energy Storage in the Scope of Circular Economy written by Carlos Miguel Costa and published by John Wiley & Sons. This book was released on 2023-03-27 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Energy Storage in the Scope of Circular Economy Comprehensive resource reviewing recent developments in the design and application of energy storage devices Sustainable Energy Storage in the Scope of Circular Economy reviews the recent developments in energy storage devices based on sustainable materials within the framework of the circular economy, addressing the sustainable design and application of energy storage devices with consideration of the key advantages and remaining challenges in this rapidly evolving research field. Topics covered include: Sustainable materials for batteries and fuel cell devices Multifunctional sustainable materials for energy storage Energy storage devices in the scope of the Internet of Things Sustainable energy storage devices and device design for sensors and actuators Waste prevention for energy storage devices based on second life and recycling procedures With detailed information on today’s most effective energy storage devices, Sustainable Energy Storage in the Scope of Circular Economy is a key resource for academic researchers, industrial scientists and engineers, and students in related programs of study who wish to understand the state of the art in this field.

Download or read book Handbook of Superconductivity written by David A. Cardwell and published by CRC Press. This book was released on 2022-07-05 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the last of three volumes of the extensively revised and updated second edition of the Handbook of Superconductivity. The past twenty years have seen rapid progress in superconducting materials, which exhibit one of the most remarkable physical states of matter ever to be discovered. Superconductivity brings quantum mechanics to the scale of the everyday world. Viable applications of superconductors rely fundamentally on an understanding of these intriguing phenomena and the availability of a range of materials with bespoke properties to meet practical needs. While the first volume covers fundamentals and various classes of materials, the second addresses processing of these into various shapes and configurations needed for applications, and ends with chapters on refrigeration methods necessary to attain the superconducting state and the desired performance. This third volume starts with a wide range of methods permitting one to characterize both the materials and various end products of processing. Subsequently, diverse classes of both large scale and electronic applications are described. Volume 3 ends with a glossary relevant to all three volumes. Key Features: Covers the depth and breadth of the field Includes contributions from leading academics and industry professionals across the world Provides hands-on familiarity with the characterization methods and offers descriptions of representative examples of practical applications A comprehensive reference, the handbook is suitable for both graduate students and practitioners in experimental physics, materials science, and multiple engineering disciplines, including electronic and electrical, chemical, mechanical, metallurgy and others.

Download or read book Micro Energy Harvesting written by Danick Briand and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its inclusion of the fundamentals, systems and applications, this reference provides readers with the basics of micro energy conversion along with expert knowledge on system electronics and real-life microdevices. The authors address different aspects of energy harvesting at the micro scale with a focus on miniaturized and microfabricated devices. Along the way they provide an overview of the field by compiling knowledge on the design, materials development, device realization and aspects of system integration, covering emerging technologies, as well as applications in power management, energy storage, medicine and low-power system electronics. In addition, they survey the energy harvesting principles based on chemical, thermal, mechanical, as well as hybrid and nanotechnology approaches. In unparalleled detail this volume presents the complete picture -- and a peek into the future -- of micro-powered microsystems.