Download or read book Emissions and In cylinder Combustion Characteristics of Fischer Tropsch and Conventional Diesel Fuels in a Modern CI Engine written by Alexander Georg Sappok and published by . This book was released on 2006 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Cont.) Emissions and in-cylinder pressure measurements were conducted for neat FT diesel, low sulfur diesel (LSD), ultra-low sulfur diesel (ULSD), and a blend of FT/LSD. The experimental results show a significant reduction in regulated emissions with the neat FT fuel and a more than proportional reduction in particulate emissions for the blend. In order to provide further insight into the emissions behavior of the fuels, combustion characteristics were determined from a heat release analysis based on the in-cylinder pressure measurements. In addition, a detailed chemical analysis of the fuels and particulate emissions was carried out. The differences in the measured combustion characteristics and fuel properties were compared to the emissions variations between the fuels studied, and an explanation for the observed emissions behavior of the fuels was developed.
Download or read book Proceedings of the Fall Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 2005 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion and In cylinder Soot Formation Characteristics of a Neat GTL fueled DI Diesel Engine written by Salih Manasra and published by . This book was released on 2012-01-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is interest in a substitution of conventional diesel fuel by alternative hydrocarbons. For example natural gas can be converted into liquid hydrocarbons using the Fischer-Tropsch process. Resulting Gas-To-Liquid (GTL) fuels may have considerable advantages with respect to their combustion. GTL fuels are appropriate for conventional diesel engines provided their operation is modified. In this context the injection strategy including injection timing and pressure is most important for the combustion process and resulting pollutants. In his experiments, the author has studied injection and combustion of GTL fuels. His investigations were focused on observing, characterizing and comparing soot formation in GTL fueled diesel engines.
Download or read book Proceedings of the 2005 Fall Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Technical Conference and published by . This book was released on 2005 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Spring Technical Conference of the ASME Internal Combustion Engine Division written by American Society of Mechanical Engineers. Internal Combustion Engine Division. Spring Technical Conference and published by . This book was released on 2006 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emission Control and Fuel Economy written by John H Johnson and published by SAE International. This book was released on 2005-06-27 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emission and fuel economy regulations and standards are compelling manufacturers to build ultra-low emission vehicles. As a result, engineers must develop spark-ignition engines with integrated emission control systems that use reformulated low-sulfur fuel. Emission Control and Fuel Economy for Port and Direct Injected SI Engines is a collection of SAE technical papers that covers the fundamentals of gasoline direct injection (DI) engine emissions and fuel economy, design variable effects on HC emissions, and advanced emission control technology and modeling approaches. All papers contained in this book were selected by an accomplished expert as the best in the field; reprinted in their entirety, they present a pathway to integrated emission control systems that meet 2004-2009 EPA standards for light-duty vehicles.
Download or read book Effect of Engine Operating Parameters and Fuel Characteristics on Diesel Engine Emissions written by Joseph Acar and published by . This book was released on 2005 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: To examine the effects of using synthetic Fischer-Tropsch (FT) diesel fuel in a modern compression ignition engine, experiments were conducted on a MY 2002 Cummins 5.9 L diesel engine outfitted with high pressure, common rail fuel injection, a variable geometry turbo charger, cooled EGR and a fully configurable engine management computer. Additionally, the effect of varied injection timing and EGR rates were studied to examine how the engine can be optimized for FT fuel. The test fuels included two standard diesel fuels, one with 400 PPM sulfur content and the other 15 PPM sulfur. The experimental fuels were Syntroleum Corporation's S-1 fuel, as well as blends of 25% S-1 with a balance of 15 or 400 PPM D2. Tests were conducted with three engine operating conditions: 1682 RPM, 474 kPa BMEP; 2011 RPM, 1000 kPa BMEP; 2011 RPM, 1400 kPa BMEP. It was found that FT fuel reduced NOx emissions 19% in low load tests, but alone had little effect in higher load tests. FT fuel reduced particulate matter (PM) emissions in almost all test case, on the order of 25 to 75%. Retarding injection timing and increasing EGR both reduce NOx emissions. In the case of standard fuels, these reduction come at the expense of increased PM. However, FT fuel reduced this effect and allows for more retarded timing and further increased EGR rates to control NO. Blended fuels, containing 25% FT, by volume, and a balance of 15 PPM or 400 PPM fuel, were found to provide most of the benefit of straight FT fuel. The FT/15 blend reduced PM 40% and the FT/400 blend reduced PM 60%.
Download or read book Technical Literature Abstracts written by Society of Automotive Engineers and published by . This book was released on 2000 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Potential and Challenges of Low Carbon Fuels for Sustainable Transport written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2022-01-01 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on low carbon fuels a preferable class of fuels for Internal Combustion Engines (ICEs) highlighting the effect of low carbon fuels on tailpipe emissions. This book aims to strengthen the knowledge base dealing with low carbon fuels as a sustainable transport fuel. The volume includes recent results and are focused on current trends of automotive sector. This book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2007 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Emissions from Trucks Using Fischer Tropsch Diesel Fuel written by and published by . This book was released on 1998 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fischer-Tropsch (F-T) catalytic conversion process can be used to synthesize diesel fuels from a variety of feedstocks, including coal, natural gas and biomass. Synthetic diesel fuels can have very low sulfur and aromatic content, and excellent autoignition characteristics. Moreover, Fischer-Tropsch diesel fuels may also be economically competitive with California B- diesel fuel if produced in large volumes. overview of Fischer-Tropsch diesel fuel production and engine emissions testing is presented. Previous engine laboratory tests indicate that F-T diesel is a promising alternative fuel because it can be used in unmodified diesel engines, and substantial exhaust emissions reductions can be realized. The authors have performed preliminary tests to assess the real-world performance of F-T diesel fuels in heavy-duty trucks. Seven White-GMC Class 8 trucks equipped with Caterpillar 10.3 liter engines were tested using F-T diesel fuel. Vehicle emissions tests were performed using West Virginia University's unique transportable chassis dynamometer. The trucks were found to perform adequately on neat F-T diesel fuel. Compared to a California diesel fuel baseline, neat F-T diesel fuel emitted about 12% lower oxides of nitrogen (NOx) and 24% lower particulate matter over a five-mile driving cycle.
Download or read book Diesel Combustion and Emissions written by Society of Automotive Engineers and published by . This book was released on 1981 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Investigation of the Performance and Emissions Characteristics of Dual Fuel Combustion in a Single Cylinder IDI Diesel Engine written by Johnnie L. Williams (Jr.) and published by . This book was released on 2018 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Author's Abstract: Restrictions in the allowable exhaust gas emissions of diesel engines has become a driving factor in the design, development, and implementation of internal combustion (IC) engines. A dual fuel research engine concept was developed and implemented in an indirect injected engine in order to research combustion characteristics and emissions for non-road applications. The experimental engine was operated at a constant speed and load 2400 rpm and 5.5 bar indicated mean effective pressure (IMEP). n-Butanol was port fuel injected at 10%, 20%, 30%, and 40% by mass fraction with neat ultra-low sulfur diesel (ULSD#2). Peak pressure, maximum pressure rise rates, and heat release rates all increased with the increasing concentration of n-Butanol. MPRR increased by 127% and AHRR increased by 30.5% as a result of the shorter ignition delay and combustion duration. Ignition delay and combustion duration were reduced by 3.6% and 31.6% respectively. This occurred despite the lower cetane number of n-Butanol as a result of increased mixing due to the port fuel injection of the alcohol. NOx and soot were simultaneously reduced by 21% and 80% respectively. Carbon monoxide and unburned hydrocarbons emissions were increased for the dual fuel combustion strategies due to valve overlap. Results display large emission reductions of harmful pollutants, such as NOx and soot.
Download or read book Intake Flow Effects on Combustion and Emissions in a Diesel Engine written by Tina R. Fuchs and published by . This book was released on 1997 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Emissions and Their Control written by Magdi K Khair and published by SAE International. This book was released on 2006-12-01 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will assist readers in meeting today's tough challenges of improving diesel engine emissions, diesel efficiency, and public perception of the diesel engine. It can be used as an introductory text, while at the same time providing practical information that will be useful for experienced readers. This comprehensive book is well illustrated with more than 560 figures and 80 tables. Each main section is broken down into chapters that offer more specific and extensive information on current issues, as well as answers to technical questions.
Download or read book The Exergy Method of Thermal Plant Analysis written by T. J. Kotas and published by Elsevier. This book was released on 2013-10-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Exergy Method of Thermal Plant Analysis aims to discuss the history, related concepts, applications, and development of the Exergy Method - analysis technique that uses the Second Law of Thermodynamics as the basis of evaluation of thermodynamic loss. The book, after an introduction to thermodynamics and its related concepts, covers concepts related to exergy, such as physical and chemical exergy, exergy concepts for a control method and a closed-system analysis, the exergy analysis of simple processes, and the thermocentric applications of exergy. A seven-part appendix is also included. Appendices A-D covers miscellaneous information on exergy, and Appendix E features charts of thermodynamic properties. Appendix F is a glossary of terms, and Appendix G contains the list of references. The text is recommended for physicists who would like to know more about the Exergy Method, its underlying principles, and its applications not only in thermal plant analysis but also in certain areas.
Download or read book Soot and NO x Emissions and Combustion Characteristics of Low Heat Rejection Direct Injection Diesel Engines written by and published by . This book was released on 1994 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance and emissions data were gathered on a normally aspirated single cylinder DI engine with various combinations of ceramic coatings installed. Thin ceramic thermal barrier coatings were applied to the piston crown and bowl, the head and valves, and the cylinder liner. The coated piston and head were run singly and in combination with the cylinder liner to investigate the effects of these different coated surfaces on emissions and performance. Coating the piston crown alone results in generally lower cylinder pressure, lower brake specific fuel consumption and lower NO(x) emission compared to the baseline engine. Soot emission is typically increased below 2000 RPM and decreased above 2000 RPM. Coating the head alone reduces cylinder pressure, but generally increases specific fuel consumption and NO(x) and soot emission. The KIVA-II code was used to model the Hydra engine with the thermal coatings. The computer modeling has led to an understanding of the effect of coating the piston on NO production. The hotter piston crown warms the intake air, shortening ignition delay and decreasing the ratio of premixed to diffusion combustion, ultimately resulting III lower peak cylinder temperature and reduced NO. The KIVA-II results agree reasonably well with the experimental data for cylinder pressure and NO and soot emission. Diesel combustion, Low heat rejection engines, NO(x) Emission, Soot emission, Thermal barrier coatings.
