Download or read book Emerging Non Volatile Memories written by Seungbum Hong and published by Springer. This book was released on 2014-11-18 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the fundamentals of emerging non-volatile memories and provides an overview of future trends in the field. Readers will find coverage of seven important memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), Multiferroic RAM (MFRAM), Phase-Change Memories (PCM), Oxide-based Resistive RAM (RRAM), Probe Storage, and Polymer Memories. Chapters are structured to reflect diffusions and clashes between different topics. Emerging Non-Volatile Memories is an ideal book for graduate students, faculty, and professionals working in the area of non-volatile memory. This book also: Covers key memory technologies, including Ferroelectric Random Access Memory (FeRAM), Ferromagnetic RAM (FMRAM), and Multiferroic RAM (MFRAM), among others. Provides an overview of non-volatile memory fundamentals. Broadens readers’ understanding of future trends in non-volatile memories.

Download or read book Emerging Non volatile Memory Technologies written by Wen Siang Lew and published by Springer Nature. This book was released on 2021-01-09 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a balanced and comprehensive guide to the core principles, fundamental properties, experimental approaches, and state-of-the-art applications of two major groups of emerging non-volatile memory technologies, i.e. spintronics-based devices as well as resistive switching devices, also known as Resistive Random Access Memory (RRAM). The first section presents different types of spintronic-based devices, i.e. magnetic tunnel junction (MTJ), domain wall, and skyrmion memory devices. This section describes how their developments have led to various promising applications, such as microwave oscillators, detectors, magnetic logic, and neuromorphic engineered systems. In the second half of the book, the underlying device physics supported by different experimental observations and modelling of RRAM devices are presented with memory array level implementation. An insight into RRAM desired properties as synaptic element in neuromorphic computing platforms from material and algorithms viewpoint is also discussed with specific example in automatic sound classification framework.

Download or read book Advances in Non volatile Memory and Storage Technology written by Yoshio Nishi and published by Elsevier. This book was released on 2014-06-24 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: New solutions are needed for future scaling down of nonvolatile memory. Advances in Non-volatile Memory and Storage Technology provides an overview of developing technologies and explores their strengths and weaknesses. After an overview of the current market, part one introduces improvements in flash technologies, including developments in 3D NAND flash technologies and flash memory for ultra-high density storage devices. Part two looks at the advantages of designing phase change memory and resistive random access memory technologies. It looks in particular at the fabrication, properties, and performance of nanowire phase change memory technologies. Later chapters also consider modeling of both metal oxide and resistive random access memory switching mechanisms, as well as conductive bridge random access memory technologies. Finally, part three looks to the future of alternative technologies. The areas covered include molecular, polymer, and hybrid organic memory devices, and a variety of random access memory devices such as nano-electromechanical, ferroelectric, and spin-transfer-torque magnetoresistive devices. Advances in Non-volatile Memory and Storage Technology is a key resource for postgraduate students and academic researchers in physics, materials science, and electrical engineering. It is a valuable tool for research and development managers concerned with electronics, semiconductors, nanotechnology, solid-state memories, magnetic materials, organic materials, and portable electronic devices. - Provides an overview of developing nonvolatile memory and storage technologies and explores their strengths and weaknesses - Examines improvements to flash technology, charge trapping, and resistive random access memory - Discusses emerging devices such as those based on polymer and molecular electronics, and nanoelectromechanical random access memory (RAM)

Download or read book Emerging Memory Technologies written by Yuan Xie and published by Springer Science & Business Media. This book was released on 2013-10-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the design implications of emerging, non-volatile memory (NVM) technologies on future computer memory hierarchy architecture designs. Since NVM technologies combine the speed of SRAM, the density of DRAM, and the non-volatility of Flash memory, they are very attractive as the basis for future universal memories. This book provides a holistic perspective on the topic, covering modeling, design, architecture and applications. The practical information included in this book will enable designers to exploit emerging memory technologies to improve significantly the performance/power/reliability of future, mainstream integrated circuits.

Download or read book Emerging Memories written by Betty Prince and published by Springer Science & Business Media. This book was released on 2007-05-08 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emerging Memories: Technologies and Trends attempts to provide background and a description of the basic technology, function and properties of emerging as well as discussing potentially suitable applications. This book explores a range of new memory products and technologies. The concept for some of these memories has been around for years. A few completely new. Some involve materials that have been in volume production in other type of devices for some time. Ferro-electrics, for example, have been used in capacitors for more than 30 years. In addition to looking at using known devices and materials in novel ways, there are new technologies being investigated such as DNA memories, light memories, molecular memories, and carbon nanotube memories, as well as the new polymer memories which hold the potential for the significant manufacturing reduction. Emerging Memories: Technologies and Trends is a useful reference for the professional engineer in the semiconductor industry.

Download or read book VLSI Design of Non Volatile Memories written by Giovanni Campardo and published by Springer Science & Business Media. This book was released on 2005-01-18 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: VLSI-Design for Non-Volatile Memories is intended for electrical engineers and graduate students who want to enter into the integrated circuit design world. Non-volatile memories are treated as an example to explain general design concepts. Practical illustrative examples of non-volatile memories, including flash types, are showcased to give insightful examples of the discussed design approaches. A collection of photos is included to make the reader familiar with silicon aspects. Throughout all parts of this book, the authors have taken a practical and applications-driven point of view, providing a comprehensive and easily understood approach to all the concepts discussed. Giovanni Campardo and Rino Micheloni have a solid track record of leading design activities at the STMicroelectronics Flash Division. David Novosel is President and founder of Intelligent Micro Design, Inc., Pittsburg, PA.

Download or read book Nonvolatile Memory Design written by Hai Li and published by CRC Press. This book was released on 2017-12-19 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacture of flash memory, which is the dominant nonvolatile memory technology, is facing severe technical barriers. So much so, that some emerging technologies have been proposed as alternatives to flash memory in the nano-regime. Nonvolatile Memory Design: Magnetic, Resistive, and Phase Changing introduces three promising candidates: phase-change memory, magnetic random access memory, and resistive random access memory. The text illustrates the fundamental storage mechanism of these technologies and examines their differences from flash memory techniques. Based on the latest advances, the authors discuss key design methodologies as well as the various functions and capabilities of the three nonvolatile memory technologies.

Download or read book Logic Non volatile Memory The Nvm Solutions For Ememory written by Charles Ching-hsiang Hsu and published by World Scientific. This book was released on 2014-03-18 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Would you like to add the capabilities of the Non-Volatile Memory (NVM) as a storage element in your silicon integrated logic circuits, and as a trimming sector in your high voltage driver and other silicon integrated analog circuits? Would you like to learn how to embed the NVM into your silicon integrated circuit products to improve their performance?This book is written to help you.It provides comprehensive instructions on fabricating the NVM using the same processes you are using to fabricate your logic integrated circuits. We at our eMemory company call this technology the embedded Logic NVM. Because embedded Logic NVM has simple fabrication processes, it has replaced the conventional NVM in many traditional and new applications, including LCD driver, LED driver, MEMS controller, touch panel controller, power management unit, ambient and motion sensor controller, micro controller unit (MCU), security ID setting tag, RFID, NFC, PC camera controller, keyboard controller, and mouse controller. The recent explosive growth of the Logic NVM indicates that it will soon dominate all NVM applications. The embedded Logic NVM was invented and has been implemented in users' applications by the 200+ employees of our eMemory company, who are also the authors and author-assistants of this book.This book covers the following Logic NVM products: One Time Programmable (OTP) memory, Multiple Times Programmable (MTP) memory, Flash memory, and Electrically Erasable Programmable Read Only Memory (EEPROM). The fundamentals of the NVM are described in this book, which include: the physics and operations of the memory transistors, the basic building block of the memory cells and the access circuits.All of these products have been used continuously by the industry worldwide. In-depth readers can attain expert proficiency in the implementation of the embedded Logic NVM technology in their products.

Download or read book Green Computing with Emerging Memory written by Takayuki Kawahara and published by Springer Science & Business Media. This book was released on 2012-09-26 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes computing innovation, using non-volatile memory for a sustainable world. It appeals to both computing engineers and device engineers by describing a new means of lower power computing innovation, without sacrificing performance over conventional low-voltage operation. Readers will be introduced to methods of design and implementation for non-volatile memory which allow computing equipment to be turned off normally when not in use and to be turned on instantly to operate with full performance when needed.

Download or read book Nonvolatile Memories written by Tseung-Yuen Tseng and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nonvolatile Memory Technologies with Emphasis on Flash written by Joe Brewer and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 766 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented here is an all-inclusive treatment of Flash technology, including Flash memory chips, Flash embedded in logic, binary cell Flash, and multilevel cell Flash. The book begins with a tutorial of elementary concepts to orient readers who are less familiar with the subject. Next, it covers all aspects and variations of Flash technology at a mature engineering level: basic device structures, principles of operation, related process technologies, circuit design, overall design tradeoffs, device testing, reliability, and applications.

Download or read book Dependable Embedded Systems written by Jörg Henkel and published by Springer Nature. This book was released on 2020-12-09 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems.

Download or read book Developments in Data Storage written by S. N. Piramanayagam and published by John Wiley & Sons. This book was released on 2011-10-11 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely text on the recent developments in data storage, from a materials perspective Ever-increasing amounts of data storage on hard disk have been made possible largely due to the immense technological advances in the field of data storage materials. Developments in Data Storage: Materials Perspective covers the recent progress and developments in recording technologies, including the emerging non-volatile memory, which could potentially become storage technologies of the future. Featuring contributions from experts around the globe, this book provides engineers and graduate students in materials science and electrical engineering a solid foundation for grasping the subject. The book begins with the basics of magnetism and recording technology, setting the stage for the following chapters on existing methods and related research topics. These chapters focus on perpendicular recording media to underscore the current trend of hard disk media; read sensors, with descriptions of their fundamental principles and challenges; and write head, which addresses the advanced concepts for writing data in magnetic recording. Two chapters are devoted to the highly challenging area in hard disk drives of tribology, which deals with reliability, corrosion, and wear-resistance of the head and media. Next, the book provides an overview of the emerging technologies, such as heat-assisted magnetic recording and bit-patterned media recording. Non-volatile memory has emerged as a promising alternative storage option for certain device applications; two chapters are dedicated to non-volatile memory technologies such as the phase-change and the magnetic random access memories. With a strong focus on the fundamentals along with an overview of research topics, Developments in Data Storage is an ideal reference for graduate students or beginners in the field of magnetic recording. It also serves as an invaluable reference for future storage technologies including non-volatile memories.

Download or read book Resistive Switching written by Daniele Ielmini and published by . This book was released on 2016 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its comprehensive coverage, this reference introduces readers to the wide topic of resistance switching, providing the knowledge, tools, and methods needed to understand, characterize and apply resistive switching memories. Starting with those materials that display resistive switching behavior, the book explains the basics of resistive switching as well as switching mechanisms and models. An in-depth discussion of memory reliability is followed by chapters on memory cell structures and architectures, while a section on logic gates rounds off the text. An invaluable self-contained book for materials scientists, electrical engineers and physicists dealing with memory research and development.

Download or read book Normally Off Computing written by Takashi Nakada and published by Springer. This book was released on 2017-01-18 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a step toward ultimate low-power computing, this book introduces normally-off computing, which involves inactive components of computer systems being aggressively powered off with the help of new non-volatile memories (NVMs). Because the energy consumption of modern information devices strongly depends on both hardware and software, co-design and co-optimization of hardware and software are indispensable to improve energy efficiency. The book discusses various topics including (1) details of low-power technologies including power gating, (2) characteristics of several new-generation NVMs, (3) normally-off computing architecture, (4) important technologies for implementing normally-off computing, (5) three practical implementations: healthcare, mobile information devices, and sensor network systems for smart city applications, and (6) related research and development. Bridging computing methodology and emerging memory devices, the book is designed for both hardware and software designers, engineers, and developers as comprehensive material for understanding normally-off computing.

Download or read book Embedded Memories for Nano Scale VLSIs written by Kevin Zhang and published by Springer. This book was released on 2010-12-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kevin Zhang Advancement of semiconductor technology has driven the rapid growth of very large scale integrated (VLSI) systems for increasingly broad applications, incl- ing high-end and mobile computing, consumer electronics such as 3D gaming, multi-function or smart phone, and various set-top players and ubiquitous sensor and medical devices. To meet the increasing demand for higher performance and lower power consumption in many different system applications, it is often required to have a large amount of on-die or embedded memory to support the need of data bandwidth in a system. The varieties of embedded memory in a given system have alsobecome increasingly more complex, ranging fromstatictodynamic and volatile to nonvolatile. Among embedded memories, six-transistor (6T)-based static random access memory (SRAM) continues to play a pivotal role in nearly all VLSI systems due to its superior speed and full compatibility with logic process technology. But as the technology scaling continues, SRAM design is facing severe challenge in mainta- ing suf?cient cell stability margin under relentless area scaling. Meanwhile, rapid expansion in mobile application, including new emerging application in sensor and medical devices, requires far more aggressive voltage scaling to meet very str- gent power constraint. Many innovative circuit topologies and techniques have been extensively explored in recent years to address these challenges.

Download or read book Nanotechnology For Electronics Biosensors Additive Manufacturing And Emerging Systems Applications written by Faquir C Jain and published by World Scientific. This book was released on 2021-06-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published as part of the well-established book series, Selected Topics in Electronics and Systems, this compendium features 18 peer reviewed articles focusing on high-performance materials and emerging devices for implementation in high-speed electronic systems.Wide-ranging topics span from novel materials and devices, biosensors and bio-nano-systems, artificial intelligence, robotics and emerging technologies, to applications in each of these fields.Systems for implementing data with security tokens; single chemical sensor for multi-analyte mixture detection; RF energy harvesters; additively manufactured RF devices for 5G, IoT, RFID and smart city applications are also prominently included.Written by eminent researchers, recent developments also highlight equivalent circuits models at room temperature and 4.2 K; quantum dot nonvolatile memories, 3D-confined quantum dot channel (QDC) and spatial wavefunction switched (SWS) FETs for high-speed multi-bit logic and novel system applications.