Download or read book EMC Pocket Guide written by Kenneth Wyatt and published by IET. This book was released on 2013 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: EMC Pocket Guide: Key EMC facts, equations and data covers radiated emissions (RE), frequency versus time domain, common PC board Issues and effects of ESD / preventing ESD problems.
Download or read book EMC Pocket Guide written by Kenneth Wyatt and published by . This book was released on 2013 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is about electromagnetic compatibility and discusses EMC fundamentals, design, measurements and standards. Commonly used equations, miscellaneous information, and information about useful software is provided.
Download or read book Electromagnetic Compatibility Engineering written by Henry W. Ott and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.
Download or read book Electromagnetic Compatibility Handbook written by Kenneth L. Kaiser and published by CRC Press. This book was released on 2004-09-29 with total page 2714 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the number of electrical devices in use continues to grow, so do the challenges of ensuring the electromagnetic compatibility (EMC) of products and systems. Fortunately, engineers have at their disposal an array of approximations, models, and rules-of-thumb to help them meet those challenges. Unfortunately, the number of these tools and guidelines is overwhelming, and worse still is the thought of investigating their origins and confirming their results. The Electromagnetic Compatibility Handbook is an unprecedented compilation of the many approximations, guidelines, models, and rules-of-thumb used in EMC analyses, complete with their sources and their limitations. The book presents these in an efficient question-and-answer format and incorporates an extremely comprehensive set of tables and figures. The author has either derived from basic principles or obtained and verified from their original sources all of the expressions in the tables. Mathcad was used to generate most of the plots and solve many of the equations, and the author includes the Mathcad programs for many of these so users can clearly see the variable assignments, assumptions, and equations. Designed to be of long-lasting value to engineers, researchers, and students, the Electromagnetic Compatibility Handbook is ideal both for quick reference and as a textbook for upper-level and graduate electrical engineering courses.
Download or read book Introduction to EMC written by John Scott and published by Butterworth-Heinemann. This book was released on 1997-08-20 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the clear guide for non-specialists to electromagnetic compatability (EMC), the effects of electromagnetic radiation and the European EMC Directive which is now in force. This book helps by explaining the basic principles of EMC, how it may be controlled in practice through filtering, shielding, appropriate printed circuit board design, and other means. Electrostatic discharge (ESD) and surge protection are discussed. The growing concern about the effects of electromagnetic waves and fields on health are examined in detail. This introduction provides beginners, technical and non-technical alike with a basic guide to the principles of EMC. This will prove essential reading for the thousands of people close to despair, giving them the underlying insight, in clear words, that is needed to comply with the EMC Directive, and therefore opens the door to continued trading in Europe and the World. Beginner's guide to EMC ideal for non-technical staff Vital for all businesses who export to either Europe or the rest of the world
Download or read book Foundations of Electromagnetic Compatibility written by Bogdan Adamczyk and published by John Wiley & Sons. This book was released on 2017-05-01 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is currently no single book that covers the mathematics, circuits, and electromagnetics backgrounds needed for the study of electromagnetic compatibility (EMC). This book aims to redress the balance by focusing on EMC and providing the background in all three disciplines. This background is necessary for many EMC practitioners who have been out of study for some time and who are attempting to follow and confidently utilize more advanced EMC texts. The book is split into three parts: Part 1 is the refresher course in the underlying mathematics; Part 2 is the foundational chapters in electrical circuit theory; Part 3 is the heart of the book: electric and magnetic fields, waves, transmission lines and antennas. Each part of the book provides an independent area of study, yet each is the logical step to the next area, providing a comprehensive course through each topic. Practical EMC applications at the end of each chapter illustrate the applicability of the chapter topics. The Appendix reviews the fundamentals of EMC testing and measurements.
Download or read book Electromagnetic Compatibility in Power Systems written by Francesco Lattarulo and published by Elsevier. This book was released on 2011-07-28 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large amount of natural or artificially produced physical phenomena are exploited for practical applications, even though several of them give rise to unpleasant consequences. These ultimately manifest themselves under form of malfunction or definitive failure of components and systems, or environmental hazard. So far, manifold categories of inadvertent or deliberate sources have been discovered to simultaneously produce useful effects in some ways but adverse ones in others. In particular, responsible for the growing interest in the last decades for Electromagnetic Compatibility (EMC) has been the progressive miniaturisation and sensitivity of electronic components and circuits, often operating in close proximity to relatively powerful sources of electromagnetic interference. Potential authors of books on the subject-matter are fully aware of the fact that planning production of manageable handbooks capable to treat all the EMC case studies of practical and long-lasting interest could result in a questionable and difficult undertaking. Therefore, in addition to textbooks providing a thorough background on basic aspects, thus being well-tailored for students and those which want to get in contact with this discipline, the most can be made to jointly sustain a helpful and practicable publishing activity is to supply specialised monographs or miscellanies of selected topics. Such resources are preferentially addressed to post-graduate students, researchers and designers, often employed in the forefront of research or engaged for remodelling design paradigms. Hence, the prerequisite for such a class of publications should consist in arousing critical sense and promoting new ideas. This is the object of Electromagnetic Compatibility in Power Systems, which tries to rather discuss special subjects, or throw out suggestions for reformulating conventional approaches, than to appear as a reference text. A common motivation encouraged the contributors to bringing together a number of accounts of the research that they have undertaken over the late years: willing to fill the important need of covering EMC topics rather proper to transmission and distribution of electric power than, more usually, to Electronics and Telecommunication Systems. - EMC topics for Power Systems, at last! - Investigating EMC features of distributed and/or complex systems - A broad body of knowledge for specific applications - A stimulating support for those which are engaged in the forefront of research and design - An example of how breaking ideas should be encouraged and proudly applied - A fruitful critique to overcomplicated and unpractical models - A comprehensive resource to estimate the important role of EMC at lower frequencies
Download or read book EMC and the Printed Circuit Board written by Mark I. Montrose and published by John Wiley & Sons. This book was released on 2004-04-05 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible, new reference work shows how and why RF energy iscreated within a printed circuit board and the manner in whichpropagation occurs. With lucid explanations, this book enablesengineers to grasp both the fundamentals of EMC theory and signalintegrity and the mitigation process needed to prevent an EMCevent. Author Montrose also shows the relationship between time andfrequency domains to help you meet mandatory compliancerequirements placed on printed circuit boards. Using real-world examples the book features: Clear discussions, without complex mathematical analysis, offlux minimization concepts Extensive analysis of capacitor usage for variousapplications Detailed examination of components characteristics with variousgrounding methodologies, including implementation techniques An in-depth study of transmission line theory A careful look at signal integrity, crosstalk, andtermination
Download or read book Noise Reduction Techniques in Electronic Systems written by Henry W. Ott and published by Wiley-Interscience. This book was released on 1988-03-23 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and expanded version of the very successful first edition offers new chapters on controlling the emission from electronic systems, especially digital systems, and on low-cost techniques for providing electromagnetic compatibility (EMC) for consumer products sold in a competitive market. There is also a new chapter on the susceptibility of electronic systems to electrostatic discharge. There is more material on FCC regulations, digital circuit noise and layout, and digital circuit radiation. Virtually all the material in the first edition has been retained. Contains a new appendix on FCC EMC test procedures.
Download or read book Introduction to Electromagnetic Fields written by Clayton R. Paul and published by McGraw-Hill Companies. This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text provides coverage of both static and dynamic fields. There are references to computer visualisation (Mathcad) and computation throughout the text, and there are Mathcad electronic books available free on the Internet to help students visualise electromagnetic fields. Important equations are highlighted in the text, and there are examples and problems throughout, with answers to the problems at the back of the book.
Download or read book EMI Troubleshooting Cookbook for Product Designers written by Patrick G. André and published by IET. This book was released on 2014-07-18 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: EMI Troubleshooting Cookbook for Product Designers is a one-stop guide that will help engineers and technicians who have products which fail to meet EMI/EMC regulatory standards. It provides "recipes" of simple, easily implemented, and inexpensive troubleshooting tools or aids that can be built by the engineer or the technician. Written in a very simple style requiring only minimal electromagnetic theory and math, the "cookbook" will teach the engineer and technician to develop a "process" for troubleshooting--making it a straight-forward approach to solving what may seem like a rather complicated problem. Real-world stories are used to further illustrate both the concepts put forth in the book and the thinking process required when troubleshooting EMI problems. All materials are organized around these main aspects in a logical way, providing accessible, useful, complete coverage of the main aspects of the mitigation/troubleshooting philosophy. The book's less technical approach and balanced coverage of both basic theory and practical aspects will provide guidelines on how to approach an EMI failure, things to try, choosing the appropriate component, to how to choose the right parts and balance between cost and performance.
Download or read book EMC for Systems and Installations written by Tim Williams and published by Newnes. This book was released on 1999-12-06 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a guide for the system designers and installers faced with the day-to-day issues of achieving EMC, and will be found valuable across a wide range of roles and sectors, including process control, manufacturing, medical, IT and building management. The EMC issues covered will also make this book essential reading for product manufacturers and suppliers - and highly relevant for managers as well as technical staff. The authors' approach is thoroughly practical - all areas of installation EMC are covered, with particular emphasis on cabling and earthing. Students on MSc and CPD programmes will also find in this book some valuable real-world antidotes to the academic treatises. The book is presented in two parts: the first is non-technical, and looks at the need for EMC in the context of systems and installations, with a chapter on the management aspects of EMC. The second part covers the technical aspects of EMC, looking at the various established methods which can be applied to ensure compatibility, and setting these in the context of the new responsibilities facing system builders. EMC for Systems and Installations is designed to complement Tim Williams' highly successful EMC for Product Designers. - Practical guide to EMC design issues for those involved in systems design and installation - Complementary title to Williams' bestselling EMC for Product Designers - Unique guidance for installers on EMC topics
Download or read book Introduction to Electromagnetic Compatibility written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2022-11-01 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTRODUCTION TO ELECTROMAGNETIC COMPATIBILITY The revised new edition of the classic textbook is an essential resource for anyone working with today’s advancements in both digital and analog devices, communications systems, as well as power/energy generation and distribution. Introduction to Electromagnetic Compatibility provides thorough coverage of the techniques and methodologies used to design and analyze electronic systems that function acceptably in their electromagnetic environment. Assuming no prior familiarity with electromagnetic compatibility, this user-friendly textbook first explains fundamental EMC concepts and technologies before moving on to more advanced topics in EMC system design. This third edition reflects the results of an extensive detailed review of the entire second edition, embracing and maintaining the content that has “stood the test of time”, such as from the theory of electromagnetic phenomena and associated mathematics, to the practical background information on U.S. and international regulatory requirements. In addition to converting Dr. Paul’s original SPICE exercises to contemporary utilization of LTSPICE, there is new chapter material on antenna modeling and simulation. This edition will continue to provide invaluable information on computer modeling for EMC, circuit board and system-level EMC design, EMC test practices, EMC measurement procedures and equipment, and more such as: Features fully-worked examples, topic reviews, self-assessment questions, end-of-chapter exercises, and numerous high-quality images and illustrations Contains useful appendices of phasor analysis methods, electromagnetic field equations and waves. The ideal textbook for university courses on EMC, Introduction to Electromagnetic Compatibility, Third Edition is also an invaluable reference for practicing electrical engineers dealing with interference issues or those wanting to learn more about electromagnetic compatibility to become better product designers.
Download or read book EMC Analysis Methods and Computational Models written by Frederick M. Tesche and published by John Wiley & Sons. This book was released on 1996-12-26 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes and illustrates various modeling techniques which are applicable to the area of EMC and includes material previously available only in international reports or other hard-to-obtain references. Electromagnetic topology, lumped-parameter circuit models, the radiation process, scalar diffraction theory for apertures, transmission line modeling, and models for shielding are among the topics discussed. The accompanying disk contains four programs based on the models developed in the text and can be used to calculate diverse transmission line responses.
Download or read book Automotive Electromagnetic Compatibility EMC written by Terence Rybak and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anyone who has operated, serviced, or designed an automobile or truck in the last few years has most certainly noticed that the age of electronics in our vehicles is here! Electronic components and systems are used for everything from the traditional entertainment system to the latest in “drive by wire”, to two-way communication and navigation. The interesting fact is that the automotive industry has been based upon mechanical and materials engineering for much of its history without many of the techniques of electrical and electronic engineering. The emissions controls requirements of the 1970’s are generally recognized as the time when electronics started to make their way into the previous mechanically based systems and functions. While this revolution was going on, the electronics industry developed issues and concepts that were addressed to allow interoperation of the systems in the presence of each other and with the external environment. This included the study of electromagnetic compatibility, as systems and components started to have influence upon each other just due to their operation. EMC developed over the years, and has become a specialized area of engineering applicable to any area of systems that included electronics. Many well-understood aspects of EMC have been developed, just as many aspects of automotive systems have been developed. We are now at a point where the issues of EMC are becoming more and more integrated into the automotive industry.
Download or read book Radio Frequency Interference RFI Pocket Guide written by Kenneth Wyatt and published by IET. This book was released on 2015-07 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handy pocket reference offers essential data on radio frequency interference (RFI) for advanced ham radio operators, wireless engineers who troubleshoot interference problems, and technicians.
Download or read book Information Storage and Management written by EMC Education Services and published by John Wiley & Sons. This book was released on 2010-01-06 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The spiraling growth of digital information makes the ISM book a "must have" addition to your IT reference library. This exponential growth has driven information management technology to new levels of sophistication and complexity, exposing a skills gap that challenge IT managers and professionals alike. The ISM book, written by storage professionals from EMC Corporation, takes an ‘open’ approach to teaching information storage and management, focusing on concepts and principles – rather that product specifics – that can be applied in all IT environments The book enables existing and aspiring IT professionals, students, faculty, and those simply wishing to gain deeper insight to this emerging pillar of IT infrastructure to achieve a comprehensive understanding of all segments of information storage technology. Sixteen chapters are organized into four sections. Advanced topics build upon the topics learned in previous chapters. Section 1, "Information Storage and Management for Today’s World": Four chapters cover information growth and challenges, define a storage system and its environment, review the evolution of storage technology, and introduce intelligent storage systems. Section 2, "Storage Options and Protocols": Six chapters cover the SCSI and Fibre channel architecture, direct-attached storage (DAS), storage area networks (SANs), network-attached storage (NAS), Internet Protocol SAN (IP-SAN), content-addressed storage (CAS), and storage virtualization. Section 3, "Business Continuity and Replication": Four chapters introduce business continuity, backup and recovery, local data replication, and remote data replication. Section 4, "Security and Administration": Two chapters cover storage security and storage infrastructure monitoring and management. The book’s supplementary web site provides up-to-date information on additional learning aids and storage certification opportunities.
