Download or read book Electromagnetic Compatibility in Power Electronics written by François Costa and published by John Wiley & Sons. This book was released on 2014-01-17 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientists largely attribute the recent deterioration of the electromagnetic environment to power electronics. This realization has spurred the study of methodical approaches to electromagnetic compatibility designs as explored in this text. The book addresses major challenges, such as handling numerous parameters vital to predicting electro magnetic effects and achieving compliance with line-harmonics norms, while proposing potential solutions.

Download or read book EMC in Power Electronics written by Laszlo Tihanyi and published by Newnes. This book was released on 1995-04-04 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics professionals will find this book invaluable when designing power equipment, because it describes in detail how to cope with the problem of electromagnetic interference. The author shows how to meet the exacting US and European EMC standards for conducted emissions.The book includes a wide range of EMI analysis techniques. An important focus is on the energy content of interference transient signals (traditional analysis concentrates on amplitude and frequency). This provides a more accurate picture of the EMI situation. For those who do not want or need detailed analysis techniques, many approximation methods are also provided. These simplified techniques give accurate results for all but the most stringent applications. The book contains several worked examples and an extensive bibliography, and is sure to be useful to electronic design engineers and others who need to meet international EMC regulations and standards. Laszlo Tihanyi has worked on EMC for over 20 years. Formerly Head of the Department of Power Electronics at the Hungarian Research Institute for the Electrical Industry, he focused primarily on solving EMI problems in electronic systems and developing a dimensioning method for power line filters.

Download or read book Electromagnetic Compatibility in Power Systems written by Francesco Lattarulo and published by Elsevier. This book was released on 2011-07-28 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large amount of natural or artificially produced physical phenomena are exploited for practical applications, even though several of them give rise to unpleasant consequences. These ultimately manifest themselves under form of malfunction or definitive failure of components and systems, or environmental hazard. So far, manifold categories of inadvertent or deliberate sources have been discovered to simultaneously produce useful effects in some ways but adverse ones in others. In particular, responsible for the growing interest in the last decades for Electromagnetic Compatibility (EMC) has been the progressive miniaturisation and sensitivity of electronic components and circuits, often operating in close proximity to relatively powerful sources of electromagnetic interference. Potential authors of books on the subject-matter are fully aware of the fact that planning production of manageable handbooks capable to treat all the EMC case studies of practical and long-lasting interest could result in a questionable and difficult undertaking. Therefore, in addition to textbooks providing a thorough background on basic aspects, thus being well-tailored for students and those which want to get in contact with this discipline, the most can be made to jointly sustain a helpful and practicable publishing activity is to supply specialised monographs or miscellanies of selected topics. Such resources are preferentially addressed to post-graduate students, researchers and designers, often employed in the forefront of research or engaged for remodelling design paradigms. Hence, the prerequisite for such a class of publications should consist in arousing critical sense and promoting new ideas. This is the object of Electromagnetic Compatibility in Power Systems, which tries to rather discuss special subjects, or throw out suggestions for reformulating conventional approaches, than to appear as a reference text. A common motivation encouraged the contributors to bringing together a number of accounts of the research that they have undertaken over the late years: willing to fill the important need of covering EMC topics rather proper to transmission and distribution of electric power than, more usually, to Electronics and Telecommunication Systems. - EMC topics for Power Systems, at last! - Investigating EMC features of distributed and/or complex systems - A broad body of knowledge for specific applications - A stimulating support for those which are engaged in the forefront of research and design - An example of how breaking ideas should be encouraged and proudly applied - A fruitful critique to overcomplicated and unpractical models - A comprehensive resource to estimate the important role of EMC at lower frequencies

Download or read book Practical Variable Speed Drives and Power Electronics written by Malcolm Barnes and published by Elsevier. This book was released on 2003-06-16 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Typical practical applications of VSDs in process control and materials handling, such as those for pumping, ventilation, conveyers, compressors and hoists are covered in detail.·Provides a fundamental understanding of the installation, operation and troubleshooting of Variable Speed Drives (VSDs)·Includes practical coverage of key topics such as troubleshooting, control wiring, operating modes, braking types, automatic restart, harmonics, electrostatic discharge and EMC/EMI issues·Essential reading for electrical engineers and those using VSDs for applications such as pumping, ventilation, conveyors and hoists in process control, materials handling and other industrial contexts

Download or read book Power Electronics in Smart Electrical Energy Networks written by Ryszard Michal Strzelecki and published by Springer Science & Business Media. This book was released on 2008-08-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Power Electronics in Smart Electrical Energy Networks” introduces a new viewpoint on power electronics, re-thinking the basic philosophy governing electricity distribution systems. The proposed concept fully exploits the potential advantages of renewable energy sources and distributed generation (DG), which should not only be connected but also fully integrated into the distribution system in order to increase the efficiency, flexibility, safety, reliability and quality of the electricity and the networks. The transformation of current electricity grids into smart (resilient and interactive) networks necessitates the development, propagation and demonstration of key enabling cost-competitive technologies. A must-read for professionals in power engineering and utility industries, and researchers and postgraduates in distributed electrical power systems, the book presents the features, solutions and applications of the power electronics arrangements useful for future smart electrical energy networks.

Download or read book Electromagnetic Compatibility of Electric Vehicle written by Li Zhai and published by Springer Nature. This book was released on 2021-01-30 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the electromagnetic compatibility(EMC) of electric vehicle(EV), including EMC of the whole vehicle, electromagnetic interference(EMI) prediction and suppression of motor drive system, EMI prediction and suppression of DC-DC converter, electromagnetic field safety and EMC of wireless charging system, signal integrity and EMC of the vehicle controller unit(VCU), EMC of battery management system(BMS), electromagnetic radiated emission diagnosis and suppression of the whole vehicle, etc. The analysis method, modeling and simulation method, test method and rectification method of EMC are demonstrated. The simulation and experimental results are presented as tables and figures. This book is useful as reference for graduate students, senior undergraduates and engineering technicians of vehicle engineering related majors. For EMI prediction, suppression and EMC optimization design for EVs, this book provides reference for engineers to solve EMC problems. This book is intended for senior undergraduates, postgraduates, lecturers and laboratory researchers engaged in electric vehicle and electromagnetic compatibility research.

Download or read book Electromagnetic Compatibility Engineering written by Henry W. Ott and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.

Download or read book Power Electronics Applied to Industrial Systems and Transports Volume 4 written by Nicolas Patin and published by Elsevier. This book was released on 2015-05-20 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: If the operation of electronic components switching scheme to reduce congestion and losses (in power converters in general and switching power supplies in particular), it also generates electromagnetic type of pollution in its immediate environment. Power Electronics for Industry and Transport, Volume 4 is devoted to electromagnetic compatibility. It presents the sources of disturbance and the square wave signal, spectral modeling generic perturbation. Disturbances propagation mechanisms called "lumped" by couplings such as a common impedance, a parasitic capacitance or a mutual and "distributed constant", for which the spatial-temporal character must be taken into account, are also covered. This book also provides spectral analysis among other items that contain inequality Heisenberg-Gabor, very useful for understanding the spread spectrum PWM type signals. - Introducing essential notions in power electronics from both theoretical and technological perspectives - Detailed chapters with a focus on electromagnetic compatibility - Presented from a user's perspective to enable you to apply the theory of power electronics to practical applications

Download or read book Noise Reduction Techniques in Electronic Systems written by Henry W. Ott and published by Wiley-Interscience. This book was released on 1988-03-23 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated and expanded version of the very successful first edition offers new chapters on controlling the emission from electronic systems, especially digital systems, and on low-cost techniques for providing electromagnetic compatibility (EMC) for consumer products sold in a competitive market. There is also a new chapter on the susceptibility of electronic systems to electrostatic discharge. There is more material on FCC regulations, digital circuit noise and layout, and digital circuit radiation. Virtually all the material in the first edition has been retained. Contains a new appendix on FCC EMC test procedures.

Download or read book Power Electronics Design written by Keith H. Sueker and published by Elsevier. This book was released on 2005-08-09 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wealth of practical design information ... the next-best-thing to having a mentor with a quarter-century of experience!

Download or read book Electromagnetic Interference and Compatibility written by Paolo Stefano Crovetti and published by MDPI. This book was released on 2021-08-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent progress in the fields of Electrical and Electronic Engineering has created new application scenarios and new Electromagnetic Compatibility (EMC) challenges, along with novel tools and methodologies to address them. This volume, which collects the contributions published in the “Electromagnetic Interference and Compatibility” Special Issue of MDPI Electronics, provides a vivid picture of current research trends and new developments in the rapidly evolving, broad area of EMC, including contributions on EMC issues in digital communications, power electronics, and analog integrated circuits and sensors, along with signal and power integrity and electromagnetic interference (EMI) suppression properties of materials.

Download or read book Electromagnetic Compatibility in Power Electronics written by François Costa and published by John Wiley & Sons. This book was released on 2014-02-03 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientists largely attribute the recent deterioration of the electromagnetic environment to power electronics. This realization has spurred the study of methodical approaches to electromagnetic compatibility designs as explored in this text. The book addresses major challenges, such as handling numerous parameters vital to predicting electro magnetic effects and achieving compliance with line-harmonics norms, while proposing potential solutions.

Download or read book Electromagnetic Compatibility EMC Design and Test Case Analysis written by Junqi Zheng and published by John Wiley & Sons. This book was released on 2019-06-18 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction to techniques for the design of electronic products from the Electromagnetic compatibility (EMC) perspective Introduces techniques for the design of electronic products from the EMC aspects Covers normalized EMC requirements and design principles to assure product compatibility Describes the main topics for the control of electromagnetic interferences and recommends design improvements to meet international standards requirements (FCC, EU EMC directive, Radio acts, etc.) Well organized in a logical sequence which starts from basic knowledge and continues through the various aspects required for compliance with EMC requirements Includes practical examples and case studies to illustrate design features and troubleshooting Author is the founder of the EMC design risk evaluation approach and this book presents many years’ experience in teaching and researching the topic

Download or read book Industrial and Technological Applications of Power Electronics Systems written by Ryszard Strzelecki and published by MDPI. This book was released on 2021-09-02 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue "Industrial and Technological Applications of Power Electronics Systems" focuses on: - new strategies of control for electric machines, including sensorless control and fault diagnosis; - existing and emerging industrial applications of GaN and SiC-based converters; - modern methods for electromagnetic compatibility. The book covers topics such as control systems, fault diagnosis, converters, inverters, and electromagnetic interference in power electronics systems. The Special Issue includes 19 scientific papers by industry experts and worldwide professors in the area of electrical engineering.

Download or read book Introduction to Electromagnetic Compatibility written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2022-11-01 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTRODUCTION TO ELECTROMAGNETIC COMPATIBILITY The revised new edition of the classic textbook is an essential resource for anyone working with today’s advancements in both digital and analog devices, communications systems, as well as power/energy generation and distribution. Introduction to Electromagnetic Compatibility provides thorough coverage of the techniques and methodologies used to design and analyze electronic systems that function acceptably in their electromagnetic environment. Assuming no prior familiarity with electromagnetic compatibility, this user-friendly textbook first explains fundamental EMC concepts and technologies before moving on to more advanced topics in EMC system design. This third edition reflects the results of an extensive detailed review of the entire second edition, embracing and maintaining the content that has “stood the test of time”, such as from the theory of electromagnetic phenomena and associated mathematics, to the practical background information on U.S. and international regulatory requirements. In addition to converting Dr. Paul’s original SPICE exercises to contemporary utilization of LTSPICE, there is new chapter material on antenna modeling and simulation. This edition will continue to provide invaluable information on computer modeling for EMC, circuit board and system-level EMC design, EMC test practices, EMC measurement procedures and equipment, and more such as: Features fully-worked examples, topic reviews, self-assessment questions, end-of-chapter exercises, and numerous high-quality images and illustrations Contains useful appendices of phasor analysis methods, electromagnetic field equations and waves. The ideal textbook for university courses on EMC, Introduction to Electromagnetic Compatibility, Third Edition is also an invaluable reference for practicing electrical engineers dealing with interference issues or those wanting to learn more about electromagnetic compatibility to become better product designers.

Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2010-07-19 with total page 1189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics, which is a rapidly growing area in terms of research and applications, uses modern electronics technology to convert electric power from one form to another, such as ac-dc, dc-dc, dc-ac, and ac-ac with a variable output magnitude and frequency. Power electronics has many applications in our every day life such as air-conditioners, electric cars, sub-way trains, motor drives, renewable energy sources and power supplies for computers. This book covers all aspects of switching devices, converter circuit topologies, control techniques, analytical methods and some examples of their applications.* 25% new content* Reorganized and revised into 8 sections comprising 43 chapters* Coverage of numerous applications, including uninterruptable power supplies and automotive electrical systems* New content in power generation and distribution, including solar power, fuel cells, wind turbines, and flexible transmission

Download or read book Electromagnetic Compatibility Handbook written by Kenneth L. Kaiser and published by CRC Press. This book was released on 2004-09-29 with total page 2714 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the number of electrical devices in use continues to grow, so do the challenges of ensuring the electromagnetic compatibility (EMC) of products and systems. Fortunately, engineers have at their disposal an array of approximations, models, and rules-of-thumb to help them meet those challenges. Unfortunately, the number of these tools and guidelines is overwhelming, and worse still is the thought of investigating their origins and confirming their results. The Electromagnetic Compatibility Handbook is an unprecedented compilation of the many approximations, guidelines, models, and rules-of-thumb used in EMC analyses, complete with their sources and their limitations. The book presents these in an efficient question-and-answer format and incorporates an extremely comprehensive set of tables and figures. The author has either derived from basic principles or obtained and verified from their original sources all of the expressions in the tables. Mathcad was used to generate most of the plots and solve many of the equations, and the author includes the Mathcad programs for many of these so users can clearly see the variable assignments, assumptions, and equations. Designed to be of long-lasting value to engineers, researchers, and students, the Electromagnetic Compatibility Handbook is ideal both for quick reference and as a textbook for upper-level and graduate electrical engineering courses.