Download or read book Embedded Systems Design and Applications with the 68HC12 and HCS12 written by Steven Frank Barrett and published by Prentice Hall. This book was released on 2005 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a second microprocessor course for students enrolled in Electrical/Computer Engineering Microcontroller courses. Designed for a senior- or graduate-level embedded systems design course, Embedded Systems Design and Applications with the 68HC12 introduces readers to unique issues associated with designing, testing, integrating, and implementing microcontroller/microprocessor-based embedded systems.
Download or read book Embedded Systems written by Barrett and published by Pearson Education India. This book was released on 2005 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Embedded Systems Design with the Texas Instruments MSP432 32 bit Processor written by Dung Dang and published by Morgan & Claypool Publishers. This book was released on 2016-10-26 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MPS432TM microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device's registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432. The MSP432 LaunchPad is supported by a host of technical data, application notes, training modules, and software examples. All are encapsulated inside one handy package called MSPWare, available as both a stand-alone download package as well as on the TI Cloud development site: dev.ti.com The features of the MSP432 may be extended with a full line of BoosterPack plug-in modules. The MSP432 is also supported by a variety of third party modular sensors and software compiler companies. In the back, a thorough introduction to the MPS432 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will also find this book very useful. Finally, middle school and high school students will find the MSP432 highly approachable via the Energia rapid prototyping system.
Download or read book Embedded Systems Design with the Texas Instruments MSP432 32 bit Processor written by Dung Dang and published by Springer Nature. This book was released on 2022-06-01 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough introduction to the Texas Instruments MPS432TM microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device's registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432. The MSP432 LaunchPad is supported by a host of technical data, application notes, training modules, and software examples. All are encapsulated inside one handy package called MSPWare, available as both a stand-alone download package as well as on the TI Cloud development site: dev.ti.com The features of the MSP432 may be extended with a full line of BoosterPack plug-in modules. The MSP432 is also supported by a variety of third party modular sensors and software compiler companies. In the back, a thorough introduction to the MPS432 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will also find this book very useful. Finally, middle school and high school students will find the MSP432 highly approachable via the Energia rapid prototyping system.
Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.
Download or read book Design of Embedded Systems Using 68HC12 11 Microcontrollers written by Richard E. Haskell and published by . This book was released on 2000 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: FEATURES/BENEFITS *A bridge between the 68HC12 and the 68HC11 - Focuses on the 68HC12, but includes material for (and provides software for) the older 68HC11. *A new version of Forth - WHYP (Words to Help You Program) - designed for use in embedded systems. WHYP can easily be installed on any 68HC12 system, including the most popular development boards from Motorola and Axiom Manufacturing. It consists of two parts-some 68HC12 subroutines that reside on the target system (typically an evaluation board) and a C++ program that runs on a PC and communicates with the 68HC12 target system through a serial line. It is a sub-routine threaded language, which means that WHYP words are just the names of 68HC12(11) subroutines. New WHYP words can be defined simply by stringing previously defined WHYP words together. The first five chapters of the text explain how to make the programming of the 68HC12 simple and interactive, and in the process develops the entire WHYP language from scratch, step by step. (The software is provided on disk with the text, and the latest versions of the software will be available on the authors web site.) *An abundance of worked examples and many chapter-end exerc
Download or read book Embedded Systems Design with the Atmel AVR Microcontroller written by Steven F. Barrett and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow on to a previously published book, titled "Atmel AVR Microcontroller Primer: Programming and Interfacing." Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller.
Download or read book Embedded Systems Design written by Steve Heath and published by Elsevier. This book was released on 2002-10-30 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this new edition the latest ARM processors and other hardware developments are fully covered along with new sections on Embedded Linux and the new freeware operating system eCOS. The hot topic of embedded systems and the internet is also introduced. In addition a fascinating new case study explores how embedded systems can be developed and experimented with using nothing more than a standard PC. * A practical introduction to the hottest topic in modern electronics design* Covers hardware, interfacing and programming in one book* New material on Embedded Linux for embedded internet systems
Download or read book Embedded System Design written by Daniel D. Gajski and published by Springer Science & Business Media. This book was released on 2009-08-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded System Design: Modeling, Synthesis and Verification introduces a model-based approach to system level design. It presents modeling techniques for both computation and communication at different levels of abstraction, such as specification, transaction level and cycle-accurate level. It discusses synthesis methods for system level architectures, embedded software and hardware components. Using these methods, designers can develop applications with high level models, which are automatically translatable to low level implementations. This book, furthermore, describes simulation-based and formal verification methods that are essential for achieving design confidence. The book concludes with an overview of existing tools along with a design case study outlining the practice of embedded system design. Specifically, this book addresses the following topics in detail: . System modeling at different abstraction levels . Model-based system design . Hardware/Software codesign . Software and Hardware component synthesis . System verification This book is for groups within the embedded system community: students in courses on embedded systems, embedded application developers, system designers and managers, CAD tool developers, design automation, and system engineering.
Download or read book Embedded System Design with ARM Cortex M Microcontrollers written by Cem Ünsalan and published by Springer Nature. This book was released on 2022-01-03 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook introduces basic and advanced embedded system topics through Arm Cortex M microcontrollers, covering programmable microcontroller usage starting from basic to advanced concepts using the STMicroelectronics Discovery development board. Designed for use in upper-level undergraduate and graduate courses on microcontrollers, microprocessor systems, and embedded systems, the book explores fundamental and advanced topics, real-time operating systems via FreeRTOS and Mbed OS, and then offers a solid grounding in digital signal processing, digital control, and digital image processing concepts — with emphasis placed on the usage of a microcontroller for these advanced topics. The book uses C language, “the” programming language for microcontrollers, C++ language, and MicroPython, which allows Python language usage on a microcontroller. Sample codes and course slides are available for readers and instructors, and a solutions manual is available to instructors. The book will also be an ideal reference for practicing engineers and electronics hobbyists who wish to become familiar with basic and advanced microcontroller concepts.
Download or read book HCS12 Microcontroller and Embedded Systems Using Assembly and C with CodeWarrior written by Muhammad Ali Mazidi and published by Prentice Hall. This book was released on 2009 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: HCS12 Microcontroller and Embedded Systems: Using Assembly and C with CodeWarrior, 1e features a systematic, step-by-step approach to covering various aspects of HCS12 C and Assembly language programming and interfacing. The text features several examples and sample programs that provide students with opportunities to learn by doing. Review questions are provided at the end of each section to reinforce the main points of the section. Students not only develop a strong foundation of Assembly language programming, they develop a comprehensive understanding of HCS12 interfacing. In doing so, they develop the knowledge background they need to understand the design and interfacing of microcontroller-based embedded systems. This book can also be used by practicing technicians, hardware engineers, computer scientists, and hobbyists. It is an ideal source for those wanting to move away from 68HC11 to a more powerful chip.
Download or read book Embedded System Design written by Frank Vahid and published by John Wiley & Sons. This book was released on 2001-10-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.
Download or read book Embedded System Design with the Atmel AVR Microcontroller I written by Steven Barrett and published by Springer Nature. This book was released on 2022-05-31 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow-on to a previously published book, titled Atmel AVR Microcontroller Primer: Programming and Interfacing. Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller. Table of Contents: Embedded Systems Design / Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog to Digital Conversion (ADC) / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / System Level Design
Download or read book Embedded Systems written by A. K. Ganguly and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems discusses the architecture, its basic hardware and software elements, programming models and software engineering practices that are used for system development process. The embedded system resources are microprocessor, memory, ports, devices and power supply unit. The innovative technologies and tools for designing an embedded system are incorporated in this book along with the parallel and serial port devices, timing devices, devices for synchronous, isosynchronous and asynchronous communications in embedded system. It also covers the most important aspects of real time programming through the use of signals, mutex, message queues, mailboxes, pipes and virtual sockets and explains the Concepts of Real Time Operating Systems (RTOS).
Download or read book Embedded System Applications written by Jean-Claude Baron and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded systems encompass a variety of hardware and software components which perform specific functions in host systems, for example, satellites, washing machines, hand-held telephones and automobiles. Embedded systems have become increasingly digital with a non-digital periphery (analog power) and therefore, both hardware and software codesign are relevant. The vast majority of computers manufactured are used in such systems. They are called `embedded' to distinguish them from standard mainframes, workstations, and PCs. Athough the design of embedded systems has been used in industrial practice for decades, the systematic design of such systems has only recently gained increased attention. Advances in microelectronics have made possible applications that would have been impossible without an embedded system design. Embedded System Applications describes the latest techniques for embedded system design in a variety of applications. This also includes some of the latest software tools for embedded system design. Applications of embedded system design in avionics, satellites, radio astronomy, space and control systems are illustrated in separate chapters. Finally, the book contains chapters related to industrial best-practice in embedded system design. Embedded System Applications will be of interest to researchers and designers working in the design of embedded systems for industrial applications.
Download or read book Embedded System Design with the Atmel AVR Microcontroller II written by Steven Barrett and published by Springer Nature. This book was released on 2022-05-31 with total page 161 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides practicing scientists and engineers an advanced treatment of the Atmel AVR microcontroller. This book is intended as a follow-on to a previously published book, titled Atmel AVR Microcontroller Primer: Programming and Interfacing. Some of the content from this earlier text is retained for completeness. This book will emphasize advanced programming and interfacing skills. We focus on system level design consisting of several interacting microcontroller subsystems. The first chapter discusses the system design process. Our approach is to provide the skills to quickly get up to speed to operate the internationally popular Atmel AVR microcontroller line by developing systems level design skills. We use the Atmel ATmega164 as a representative sample of the AVR line. The knowledge you gain on this microcontroller can be easily translated to every other microcontroller in the AVR line. In succeeding chapters, we cover the main subsystems aboard the microcontroller, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying software for the subsystem. We then provide advanced examples exercising some of the features discussed. In all examples, we use the C programming language. The code provided can be readily adapted to the wide variety of compilers available for the Atmel AVR microcontroller line. We also include a chapter describing how to interface the microcontroller to a wide variety of input and output devices. The book concludes with several detailed system level design examples employing the Atmel AVR microcontroller. Table of Contents: Embedded Systems Design / Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog to Digital Conversion (ADC) / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / System Level Design
Download or read book Software Engineering for Embedded Systems written by Robert Oshana and published by Newnes. This book was released on 2019-06-21 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software Engineering for Embedded Systems: Methods, Practical Techniques, and Applications, Second Edition provides the techniques and technologies in software engineering to optimally design and implement an embedded system. Written by experts with a solution focus, this encyclopedic reference gives an indispensable aid on how to tackle the day-to-day problems encountered when using software engineering methods to develop embedded systems. New sections cover peripheral programming, Internet of things, security and cryptography, networking and packet processing, and hands on labs. Users will learn about the principles of good architecture for an embedded system, design practices, details on principles, and much more. Provides a roadmap of key problems/issues and references to their solution in the text Reviews core methods and how to apply them Contains examples that demonstrate timeless implementation details Users case studies to show how key ideas can be implemented, the rationale for choices made, and design guidelines and trade-offs
