Download or read book Embedded Systems and Software Validation written by Abhik Roychoudhury and published by Morgan Kaufmann. This book was released on 2009-04-29 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern embedded systems require high performance, low cost and low power consumption. Such systems typically consist of a heterogeneous collection of processors, specialized memory subsystems, and partially programmable or fixed-function components. This heterogeneity, coupled with issues such as hardware/software partitioning, mapping, scheduling, etc., leads to a large number of design possibilities, making performance debugging and validation of such systems a difficult problem. Embedded systems are used to control safety critical applications such as flight control, automotive electronics and healthcare monitoring. Clearly, developing reliable software/systems for such applications is of utmost importance. This book describes a host of debugging and verification methods which can help to achieve this goal. - Covers the major abstraction levels of embedded systems design, starting from software analysis and micro-architectural modeling, to modeling of resource sharing and communication at the system level - Integrates formal techniques of validation for hardware/software with debugging and validation of embedded system design flows - Includes practical case studies to answer the questions: does a design meet its requirements, if not, then which parts of the system are responsible for the violation, and once they are identified, then how should the design be suitably modified?

Download or read book Software Engineering of Fault Tolerant Systems written by Patrizio Pelliccione and published by World Scientific. This book was released on 2007 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: When architecting dependable systems, fault tolerance is required to improve the overall system robustness. Many studies have been proposed, but the solutions are usually commissioned late during the design and implementation phases of the software life-cycle (e.g., Java and Windows NT exception handling), thus reducing the error recovery effectiveness. Since the system design typically models only normal behaviors of the system while ignoring exceptional ones, the generated system implementation is unable to handle abnormal events. Consequently, the system may fail in unexpected ways due to some faults. Researchers have advocated that fault tolerance management during the entire life-cycle improves the overall system robustness and that different classes of exceptions must be identified for each identified phase of software development, depending on the abstraction level of the software system being modeled. This book builds on this trend and investigates how fault tolerance mechanisms can be used when engineering a software system. New problems will arise, new models are needed at different abstraction levels, methodologies for mode driven engineering of such systems must be defined, new technologies are required, and new validation and verification environments are necessary.

Download or read book Software Test Attacks to Break Mobile and Embedded Devices written by Jon Duncan Hagar and published by CRC Press. This book was released on 2013-09-25 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Address Errors before Users Find ThemUsing a mix-and-match approach, Software Test Attacks to Break Mobile and Embedded Devices presents an attack basis for testing mobile and embedded systems. Designed for testers working in the ever-expanding world of "smart" devices driven by software, the book focuses on attack-based testing that can be used by

Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.

Download or read book Better Embedded System Software written by Philip Koopman and published by Independently Published. This book was released on 2021-01-26 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: A classic book for professional embedded system designers, now in an affordable paperback edition. This book distills the experience of more than 90 design reviews on real embedded systems into a set of bite-size lessons learned in the areas of software development process, requirements, architecture, design, implementation, verification & validation, and critical system properties. This is a concept book rather than a cut-and-paste the code book.Each chapter describes an area that tends to be a problem in embedded system design, symptoms that tend to indicate you need to make changes, the risks of not fixing problems in this area, and concrete ways to make your embedded system software better. Each of the 29 chapters is self-sufficient, permitting developers with a busy schedule to cherry-pick the best ideas to make their systems better right away.If you are relatively new to the area but have already learned the basics, this book will be an invaluable asset for taking your game to the next level. If you are experienced, this book provides a way to fill in any gaps. Once you have mastered this material, the book will serve as a source of reminders to make sure you haven't forgotten anything as you plan your next project. This is version 1.1 with some minor revisions from the 2010 hardcover edition. This is a paperback print-on-demand edition produced by Amazon.

Download or read book Medical Device Software Verification Validation and Compliance written by David A. Vogel and published by Artech House. This book was released on 2011 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: HereOCOs the first book written specifically to help medical device and software engineers, QA and compliance professionals, and corporate business managers better understand and implement critical verification and validation processes for medical device software.Offering you a much broader, higher-level picture than other books in this field, this book helps you think critically about software validation -- to build confidence in your softwareOCOs safety and effectiveness. The book presents validation activities for each phase of the development lifecycle and shows: why these activities are important and add value; how to undertake them; and what outputs need to be created to document the validation process.From software embedded within medical devices, to software that performs as a medical device itself, this comprehensive book explains how properly handled validation throughout the development lifecycle can help bring medical devices to completion sooner, at higher quality, in compliance with regulations."

Download or read book Embedded System Design written by Frank Vahid and published by John Wiley & Sons. This book was released on 2001-10-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.

Download or read book Embedded System Development Process written by Roger Hu and published by . This book was released on 2021-01-19 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost each and every electronic gadget around us is an embedded system, for example: Smart phone, palmtop, digital watch, digital camera, printer, scanner, washer machine control panel, home security system, and many more. Embedded systems have revolutionized our society into a digital world due to the fact that they are microcontroller-based, compact in sizes, reliable in performance, and cheaper in cost. Book ContentsThis book will assist you to learn about embedded systems, its design and development process. Four serial phases: plan, design, integrated development (ID), design verification and validation (DV&V) are presented and discussed in this book.This book begins by introducing what the embedded system basics are. Chapter 1 present classification and aspect of embedded systems, describes embedded systems' hardware and software characteristics. Then it is continued by chapter 2 to depict a time-task span of the embedded system product development process.Chapter 3, 4, 5, and 6, each describes the four phases of the design and development process respectively, which are Plan (Chapter 3), Design (chapter 4), Integrated Development (Chapter 5), Design Verification and Validation (Chapter 6). Plan phase (Chapter 3) describes product requirement, cost analysis, development strategy, management plan, development methodology, design tools and equipment.Design phase (Chapter 4) go over each design process flows, and present descriptions on: hardware board design process, hardware PCB design process, signal integrity analysis and simulation, software design process, and FPGA design process.Integrated Development phase (Chapter 5) discuss on: mechanical and PCB preparations, parts acquisition, FPGA preparation, PCB assembly, hardware testing and debug, hardware/software integrated development, and virtual prototype.Design Verification and Validation phase (Chapter 6) present appearance inspection, functional testing, characteristics and measurements, performance testing, and ESD, EMC, safety testing.Appendixes in this book provide tables and descriptions on hardware and software design checklists, guidelines, and development tools for reference. Bold texts in the paragraphs shall represent a development process name, phase name, step name, or a term of the glossary, or an emphasis.Audience: This book is intentionally written for following audience: -Managers and team leaders who need to manage and guide embedded system design and development process effectively.-Engineers and technicians who want to speed up and optimize embedded system design and development process.-New graduates and students who want to study and learn embedded system design and development process.-Interested readers who want explore embedded system design and development process.

Download or read book Architecture and Design of Distributed Embedded Systems written by Bernd Kleinjohann and published by Springer Science & Business Media. This book was released on 2001-04-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the decreasing production costs of IT systems, applications that had to be realised as expensive PCBs formerly, can now be realised as a system-on-chip. Furthermore, low cost broadband communication media for wide area communication as well as for the realisation of local distributed systems are available. Typically the market requires IT systems that realise a set of specific features for the end user in a given environment, so called embedded systems. Some examples for such embedded systems are control systems in cars, airplanes, houses or plants, information and communication devices like digital TV, mobile phones or autonomous systems like service- or edutainment robots. For the design of embedded systems the designer has to tackle three major aspects: The application itself including the man-machine interface, The (target) architecture of the system including all functional and non-functional constraints and, the design methodology including modelling, specification, synthesis, test and validation. The last two points are a major focus of this book. This book documents the high quality approaches and results that were presented at the International Workshop on Distributed and Parallel Embedded Systems (DIPES 2000), which was sponsored by the International Federation for Information Processing (IFIP), and organised by IFIP working groups WG10.3, WG10.4 and WG10.5. The workshop took place on October 18-19, 2000, in Schloß Eringerfeld near Paderborn, Germany. Architecture and Design of Distributed Embedded Systems is organised similar to the workshop. Chapters 1 and 4 (Methodology I and II) deal with different modelling and specification paradigms and the corresponding design methodologies. Generic system architectures for different classes of embedded systems are presented in Chapter 2. In Chapter 3 several design environments for the support of specific design methodologies are presented. Problems concerning test and validation are discussed in Chapter 5. The last two chapters include distribution and communication aspects (Chapter 6) and synthesis techniques for embedded systems (Chapter 7). This book is essential reading for computer science researchers and application developers.

Download or read book System level Test and Validation of Hardware Software Systems written by Matteo Sonza Reorda and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: New manufacturing technologies have made possible the integration of entire systems on a single chip. This new design paradigm, termed system-on-chip (SOC), together with its associated manufacturing problems, represents a real challenge for designers. SOC is also reshaping approaches to test and validation activities. These are beginning to migrate from the traditional register-transfer or gate levels of abstraction to the system level. Until now, test and validation have not been supported by system-level design tools so designers have lacked the infrastructure to exploit all the benefits stemming from the adoption of the system level of abstraction. Research efforts are already addressing this issue. This monograph provides a state-of-the-art overview of the current validation and test techniques by covering all aspects of the subject including: modeling of bugs and defects; stimulus generation for validation and test purposes (including timing errors; design for testability.

Download or read book Test Driven Development for Embedded C written by James W. Grenning and published by Pragmatic Bookshelf. This book was released on 2011-04-25 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Another day without Test-Driven Development means more time wasted chasing bugs and watching your code deteriorate. You thought TDD was for someone else, but it's not! It's for you, the embedded C programmer. TDD helps you prevent defects and build software with a long useful life. This is the first book to teach the hows and whys of TDD for C programmers. TDD is a modern programming practice C developers need to know. It's a different way to program---unit tests are written in a tight feedback loop with the production code, assuring your code does what you think. You get valuable feedback every few minutes. You find mistakes before they become bugs. You get early warning of design problems. You get immediate notification of side effect defects. You get to spend more time adding valuable features to your product. James is one of the few experts in applying TDD to embedded C. With his 1.5 decades of training,coaching, and practicing TDD in C, C++, Java, and C# he will lead you from being a novice in TDD to using the techniques that few have mastered. This book is full of code written for embedded C programmers. You don't just see the end product, you see code and tests evolve. James leads you through the thought process and decisions made each step of the way. You'll learn techniques for test-driving code right nextto the hardware, and you'll learn design principles and how to apply them to C to keep your code clean and flexible. To run the examples in this book, you will need a C/C++ development environment on your machine, and the GNU GCC tool chain or Microsoft Visual Studio for C++ (some project conversion may be needed).

Download or read book Testing Complex and Embedded Systems written by Kim H. Pries and published by CRC Press. This book was released on 2018-09-03 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many enterprises regard system-level testing as the final piece of the development effort, rather than as a tool that should be integrated throughout the development process. As a consequence, test teams often execute critical test plans just before product launch, resulting in much of the corrective work being performed in a rush and at the last minute. Presenting combinatorial approaches for improving test coverage, Testing Complex and Embedded Systems details techniques to help you streamline testing and identify problems before they occur—including turbocharged testing using Six Sigma and exploratory testing methods. Rather than present the continuum of testing for particular products or design attributes, the text focuses on boundary conditions. Examining systems and software testing, it explains how to use simulation and emulation to complement testing. Details how to manage multiple test hardware and software deliveries Examines the contradictory perspectives of testing—including ordered/ random, structured /unstructured, bench/field, and repeatable/non repeatable Covers essential planning activities prior to testing, how to scope the work, and how to reach a successful conclusion Explains how to determine when testing is complete Where you find organizations that are successful at product development, you are likely to find groups that practice disciplined, strategic, and thorough testing. Tapping into the authors’ decades of experience managing test groups in the automotive industry, this book provides the understanding to help ensure your organization joins the likes of these groups.

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book Embedded System Design written by Daniel D. Gajski and published by Springer Science & Business Media. This book was released on 2009-08-14 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded System Design: Modeling, Synthesis and Verification introduces a model-based approach to system level design. It presents modeling techniques for both computation and communication at different levels of abstraction, such as specification, transaction level and cycle-accurate level. It discusses synthesis methods for system level architectures, embedded software and hardware components. Using these methods, designers can develop applications with high level models, which are automatically translatable to low level implementations. This book, furthermore, describes simulation-based and formal verification methods that are essential for achieving design confidence. The book concludes with an overview of existing tools along with a design case study outlining the practice of embedded system design. Specifically, this book addresses the following topics in detail: . System modeling at different abstraction levels . Model-based system design . Hardware/Software codesign . Software and Hardware component synthesis . System verification This book is for groups within the embedded system community: students in courses on embedded systems, embedded application developers, system designers and managers, CAD tool developers, design automation, and system engineering.

Download or read book Verification and Validation in Systems Engineering written by Mourad Debbabi and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the dawn of the 21st century and the information age, communication and c- puting power are becoming ever increasingly available, virtually pervading almost every aspect of modern socio-economical interactions. Consequently, the potential for realizing a signi?cantly greater number of technology-mediated activities has emerged. Indeed, many of our modern activity ?elds are heavily dependant upon various underlying systems and software-intensive platforms. Such technologies are commonly used in everyday activities such as commuting, traf?c control and m- agement, mobile computing, navigation, mobile communication. Thus, the correct function of the forenamed computing systems becomes a major concern. This is all the more important since, in spite of the numerous updates, patches and ?rmware revisions being constantly issued, newly discovered logical bugs in a wide range of modern software platforms (e. g. , operating systems) and software-intensive systems (e. g. , embedded systems) are just as frequently being reported. In addition, many of today’s products and services are presently being deployed in a highly competitive environment wherein a product or service is succeeding in most of the cases thanks to its quality to price ratio for a given set of features. Accordingly, a number of critical aspects have to be considered, such as the ab- ity to pack as many features as needed in a given product or service while c- currently maintaining high quality, reasonable price, and short time -to- market.

Download or read book System Level Design Techniques for Energy Efficient Embedded Systems written by Marcus T. Schmitz and published by Springer Science & Business Media. This book was released on 2004 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: "System-Level Design Techniques for Energy-Efficient Embedded Systems will be of interest to advanced undergraduates, graduate students, and designers."--BOOK JACKET.

Download or read book Co verification of Hardware and Software for ARM SoC Design written by Jason Andrews and published by Elsevier. This book was released on 2004-09-04 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardware/software co-verification is how to make sure that embedded system software works correctly with the hardware, and that the hardware has been properly designed to run the software successfully -before large sums are spent on prototypes or manufacturing. This is the first book to apply this verification technique to the rapidly growing field of embedded systems-on-a-chip(SoC). As traditional embedded system design evolves into single-chip design, embedded engineers must be armed with the necessary information to make educated decisions about which tools and methodology to deploy. SoC verification requires a mix of expertise from the disciplines of microprocessor and computer architecture, logic design and simulation, and C and Assembly language embedded software. Until now, the relevant information on how it all fits together has not been available. Andrews, a recognized expert, provides in-depth information about how co-verification really works, how to be successful using it, and pitfalls to avoid. He illustrates these concepts using concrete examples with the ARM core - a technology that has the dominant market share in embedded system product design. The companion CD-ROM contains all source code used in the design examples, a searchable e-book version, and useful design tools.* The only book on verification for systems-on-a-chip (SoC) on the market* Will save engineers and their companies time and money by showing them how to speed up the testing process, while still avoiding costly mistakes* Design examples use the ARM core, the dominant technology in SoC, and all the source code is included on the accompanying CD-Rom, so engineers can easily use it in their own designs