Download or read book Embedded Operating System Projects written by Hentschel, Uwe and published by Universitätsverlag Potsdam. This book was released on 2014 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: In today’s life, embedded systems are ubiquitous. But they differ from traditional desktop systems in many aspects – these include predictable timing behavior (real-time), the management of scarce resources (memory, network), reliable communication protocols, energy management, special purpose user-interfaces (headless operation), system configuration, programming languages (to support software/hardware co-design), and modeling techniques. Within this technical report, authors present results from the lecture “Operating Systems for Embedded Computing” that has been offered by the “Operating Systems and Middleware” group at HPI in Winter term 2013/14. Focus of the lecture and accompanying projects was on principles of real-time computing. Students had the chance to gather practical experience with a number of different OSes and applications and present experiences with near-hardware programming. Projects address the entire spectrum, from bare-metal programming to harnessing a real-time OS to exercising the full software/hardware co-design cycle. Three outstanding projects are at the heart of this technical report. Project 1 focuses on the development of a bare-metal operating system for LEGO Mindstorms EV3. While still a toy, it comes with a powerful ARM processor, 64 MB of main memory, standard interfaces, such as Bluetooth and network protocol stacks. EV3 runs a version of 1 1 Introduction Linux. Sources are available from Lego’s web site. However, many devices and their driver software are proprietary and not well documented. Developing a new, bare-metal OS for the EV3 requires an understanding of the EV3 boot process. Since no standard input/output devices are available, initial debugging steps are tedious. After managing these initial steps, the project was able to adapt device drivers for a few Lego devices to an extent that a demonstrator (the Segway application) could be successfully run on the new OS. Project 2 looks at the EV3 from a different angle. The EV3 is running a pretty decent version of Linux- in principle, the RT_PREEMPT patch can turn any Linux system into a real-time OS by modifying the behavior of a number of synchronization constructs at the heart of the OS. Priority inversion is a problem that is solved by protocols such as priority inheritance or priority ceiling. Real-time OSes implement at least one of the protocols. The central idea of the project was the comparison of non-real-time and real-time variants of Linux on the EV3 hardware. A task set that showed effects of priority inversion on standard EV3 Linux would operate flawlessly on the Linux version with the RT_PREEMPT-patch applied. If only patching Lego’s version of Linux was that easy... Project 3 takes the notion of real-time computing more seriously. The application scenario was centered around our Carrera Digital 132 racetrack. Obtaining position information from the track, controlling individual cars, detecting and modifying the Carrera Digital protocol required design and implementation of custom controller hardware. What to implement in hardware, firmware, and what to implement in application software – this was the central question addressed by the project.
Download or read book An Embedded Software Primer written by David E. Simon and published by Addison-Wesley Professional. This book was released on 1999 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simon introduces the broad range of applications for embedded software and then reviews each major issue facing developers, offering practical solutions, techniques, and good habits that apply no matter which processor, real-time operating systems, methodology, or application is used.
Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.
Download or read book Hands On RTOS with Microcontrollers written by Brian Amos and published by Packt Publishing Ltd. This book was released on 2020-05-15 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a strong foundation in designing and implementing real-time systems with the help of practical examples Key Features Get up and running with the fundamentals of RTOS and apply them on STM32 Enhance your programming skills to design and build real-world embedded systems Get to grips with advanced techniques for implementing embedded systems Book DescriptionA real-time operating system (RTOS) is used to develop systems that respond to events within strict timelines. Real-time embedded systems have applications in various industries, from automotive and aerospace through to laboratory test equipment and consumer electronics. These systems provide consistent and reliable timing and are designed to run without intervention for years. This microcontrollers book starts by introducing you to the concept of RTOS and compares some other alternative methods for achieving real-time performance. Once you've understood the fundamentals, such as tasks, queues, mutexes, and semaphores, you'll learn what to look for when selecting a microcontroller and development environment. By working through examples that use an STM32F7 Nucleo board, the STM32CubeIDE, and SEGGER debug tools, including SEGGER J-Link, Ozone, and SystemView, you'll gain an understanding of preemptive scheduling policies and task communication. The book will then help you develop highly efficient low-level drivers and analyze their real-time performance and CPU utilization. Finally, you'll cover tips for troubleshooting and be able to take your new-found skills to the next level. By the end of this book, you'll have built on your embedded system skills and will be able to create real-time systems using microcontrollers and FreeRTOS.What you will learn Understand when to use an RTOS for a project Explore RTOS concepts such as tasks, mutexes, semaphores, and queues Discover different microcontroller units (MCUs) and choose the best one for your project Evaluate and select the best IDE and middleware stack for your project Use professional-grade tools for analyzing and debugging your application Get FreeRTOS-based applications up and running on an STM32 board Who this book is for This book is for embedded engineers, students, or anyone interested in learning the complete RTOS feature set with embedded devices. A basic understanding of the C programming language and embedded systems or microcontrollers will be helpful.
Download or read book Embedded Software Development written by Ivan Cibrario Bertolotti and published by CRC Press. This book was released on 2017-12-19 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Software Development: The Open-Source Approach delivers a practical introduction to embedded software development, with a focus on open-source components. This programmer-centric book is written in a way that enables even novice practitioners to grasp the development process as a whole. Incorporating real code fragments and explicit, real-world open-source operating system references (in particular, FreeRTOS) throughout, the text: Defines the role and purpose of embedded systems, describing their internal structure and interfacing with software development tools Examines the inner workings of the GNU compiler collection (GCC)-based software development system or, in other words, toolchain Presents software execution models that can be adopted profitably to model and express concurrency Addresses the basic nomenclature, models, and concepts related to task-based scheduling algorithms Shows how an open-source protocol stack can be integrated in an embedded system and interfaced with other software components Analyzes the main components of the FreeRTOS Application Programming Interface (API), detailing the implementation of key operating system concepts Discusses advanced topics such as formal verification, model checking, runtime checks, memory corruption, security, and dependability Embedded Software Development: The Open-Source Approach capitalizes on the authors’ extensive research on real-time operating systems and communications used in embedded applications, often carried out in strict cooperation with industry. Thus, the book serves as a springboard for further research.
Download or read book Embedded System Design on a Shoestring written by Lewin Edwards and published by Elsevier. This book was released on 2003-06-02 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this practical guide, experienced embedded engineer Lewin Edwards demonstrates faster, lower-cost methods for developing high-end embedded systems. With today's tight schedules and lower budgets, embedded designers are under greater pressure to deliver prototypes and system designs faster and cheaper. Edwards demonstrates how the use of the right tools and operating systems can make seemingly impossible deadlines possible. Designer's Guide to Embedded Systems Development shares many advanced, in-the-trenches design secrets to help engineers achieve better performance on the job. In particular, it covers many of the newer design tools supported by the GPL (GNU Public License) system. Code examples are given to provide concrete illustrations of tasks described in the text. The general procedures are applicable to many possible projects based on any 16/32-bit microcontroller. The book covers choosing the right architecture and development hardware to fit the project; choosing an operating system and developing a toolchain; evaluating software licenses and how they affect a project; step-by-step building instructions for gcc, binutils, gdb and newlib for the ARM7 core used in the case study project; prototyping techniques using a custom printed circuit board; debugging tips; and portability considerations. A wealth of practical tips, tricks and techniques Design better, faster and more cost-effectively
Download or read book Embedded Systems Design using the MSP430FR2355 LaunchPadTM written by Brock J. LaMeres and published by Springer Nature. This book was released on 2020-06-19 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook for courses in Embedded Systems introduces students to necessary concepts, through a hands-on approach. LEARN BY EXAMPLE – This book is designed to teach the material the way it is learned, through example. Every concept is supported by numerous programming examples that provide the reader with a step-by-step explanation for how and why the computer is doing what it is doing. LEARN BY DOING – This book targets the Texas Instruments MSP430 microcontroller. This platform is a widely popular, low-cost embedded system that is used to illustrate each concept in the book. The book is designed for a reader that is at their computer with an MSP430FR2355 LaunchPadTM Development Kit plugged in so that each example can be coded and run as they learn. LEARN BOTH ASSEMBLY AND C – The book teaches the basic operation of an embedded computer using assembly language so that the computer operation can be explored at a low-level. Once more complicated systems are introduced (i.e., timers, analog-to-digital converters, and serial interfaces), the book moves into the C programming language. Moving to C allows the learner to abstract the operation of the lower-level hardware and focus on understanding how to “make things work”. BASED ON SOUND PEDAGOGY - This book is designed with learning outcomes and assessment at its core. Each section addresses a specific learning outcome that the student should be able to “do” after its completion. The concept checks and exercise problems provide a rich set of assessment tools to measure student performance on each outcome.
Download or read book Practical UML Statecharts in C C written by Miro Samek and published by CRC Press. This book was released on 2008-10-03 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical UML Statecharts in C/C++ Second Edition bridges the gap between high-level abstract concepts of the Unified Modeling Language (UML) and the actual programming aspects of modern hierarchical state machines (UML statecharts). The book describes a lightweight, open source, event-driven infrastructure, called QP that enables direct manual cod
Download or read book Software Engineering for Embedded Systems written by Robert Oshana and published by Newnes. This book was released on 2013-04-01 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Expert Guide gives you the techniques and technologies in software engineering to optimally design and implement your embedded system. Written by experts with a solutions focus, this encyclopedic reference gives you an indispensable aid to tackling the day-to-day problems when using software engineering methods to develop your embedded systems. With this book you will learn: - The principles of good architecture for an embedded system - Design practices to help make your embedded project successful - Details on principles that are often a part of embedded systems, including digital signal processing, safety-critical principles, and development processes - Techniques for setting up a performance engineering strategy for your embedded system software - How to develop user interfaces for embedded systems - Strategies for testing and deploying your embedded system, and ensuring quality development processes - Practical techniques for optimizing embedded software for performance, memory, and power - Advanced guidelines for developing multicore software for embedded systems - How to develop embedded software for networking, storage, and automotive segments - How to manage the embedded development process Includes contributions from: Frank Schirrmeister, Shelly Gretlein, Bruce Douglass, Erich Styger, Gary Stringham, Jean Labrosse, Jim Trudeau, Mike Brogioli, Mark Pitchford, Catalin Dan Udma, Markus Levy, Pete Wilson, Whit Waldo, Inga Harris, Xinxin Yang, Srinivasa Addepalli, Andrew McKay, Mark Kraeling and Robert Oshana. - Road map of key problems/issues and references to their solution in the text - Review of core methods in the context of how to apply them - Examples demonstrating timeless implementation details - Short and to- the- point case studies show how key ideas can be implemented, the rationale for choices made, and design guidelines and trade-offs
Download or read book Programming Embedded Systems written by Michael Barr and published by "O'Reilly Media, Inc.". This book was released on 2006-10-11 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by two of the leading authorities in the field, this guide offers readers the knowledge and skills needed to achieve proficiency with embedded software.
Download or read book Embedded Software Development with ECos written by Anthony J. Massa and published by Prentice Hall Professional. This book was released on 2002 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to build low-cost, royalty-free embedded solutions with eCos, covers eCos architecture, installation, configuration, coding, debugging, bootstrapping, porting, and more, includes open source tools on CD-ROM for a complete embedded software development environment with eCos as the core.
Download or read book Building Embedded Linux Systems written by Karim Yaghmour and published by "O'Reilly Media, Inc.". This book was released on 2003-04-22 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: Linux® is being adopted by an increasing number of embedded systems developers, who have been won over by its sophisticated scheduling and networking, its cost-free license, its open development model, and the support offered by rich and powerful programming tools. While there is a great deal of hype surrounding the use of Linux in embedded systems, there is not a lot of practical information. Building Embedded Linux Systems is the first in-depth, hard-core guide to putting together an embedded system based on the Linux kernel. This indispensable book features arcane and previously undocumented procedures for: Building your own GNU development toolchain Using an efficient embedded development framework Selecting, configuring, building, and installing a target-specific kernel Creating a complete target root filesystem Setting up, manipulating, and using solid-state storage devices Installing and configuring a bootloader for the target Cross-compiling a slew of utilities and packages Debugging your embedded system using a plethora of tools and techniques Details are provided for various target architectures and hardware configurations, including a thorough review of Linux's support for embedded hardware. All explanations rely on the use of open source and free software packages. By presenting how to build the operating system components from pristine sources and how to find more documentation or help, this book greatly simplifies the task of keeping complete control over one's embedded operating system, whether it be for technical or sound financial reasons.Author Karim Yaghmour, a well-known designer and speaker who is responsible for the Linux Trace Toolkit, starts by discussing the strengths and weaknesses of Linux as an embedded operating system. Licensing issues are included, followed by a discussion of the basics of building embedded Linux systems. The configuration, setup, and use of over forty different open source and free software packages commonly used in embedded Linux systems are also covered. uClibc, BusyBox, U-Boot, OpenSSH, thttpd, tftp, strace, and gdb are among the packages discussed.
Download or read book UC OS III written by Jean J Labrosse and published by . This book was released on 2010-02-16 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-part book puts the spotlight on how a real-time kernel works using Micrium's C/OS-III kernel as a reference. Part I includes an overview of the operation of real-time kernels, and walks through various aspects of C/OS-III implementation and usage. Part II provides application examples (using the versatile Renesas YRDKSH7216 Evaluation Board, available separately) that enable readers to rapidly develop their own prototypes. This book is written for serious embedded systems programmers, consultants, hobbyists, and students interested in understanding the inner workings of a real-time kernel. C/OS-III is not just a great learning platform, but also a full commercial-grade software package, ready to be part of a wide range of products. C/OS-III is a highly portable, ROMable, scalable, preemptive real-time, multitasking kernel designed specifically to address the demanding requirements of today 's embedded systems. C/OS-III is the successor to the highly popular C/OS-II real-time kernel but can use most of C/OS-II 's ports with minor modifications. Some of the features of C/OS-III are: Preemptive multitasking with round-robin scheduling of tasks at the same priority Supports and unlimited number of tasks and other kernel objects Rich set of services: semaphores, mutual exclusion semaphores with full priority inheritance, event flags, message queues, timers, fixed-size memory block management, and more. Built-in performance measurements
Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.
Download or read book Programming Embedded Systems in C and C written by Michael Barr and published by "O'Reilly Media, Inc.". This book was released on 1999 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces embedded systems to C and C++ programmers. Topics include testing memory devices, writing and erasing flash memory, verifying nonvolatile memory contents, controlling on-chip peripherals, device driver design and implementation, and more.
Download or read book Embedded Systems Fundamentals with ARM Cortex M Based Microcontrollers written by Alexander G. Dean and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Embedded Systems and Robotics with Open Source Tools written by Nilanjan Dey and published by CRC Press. This book was released on 2018-09-03 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems and Robotics with Open-Source Tools provides easy-to-understand and easy-to-implement guidance for rapid prototype development. Designed for readers unfamiliar with advanced computing technologies, this highly accessible book: Describes several cutting-edge open-source software and hardware technologies Examines a number of embedded computer systems and their practical applications Includes detailed projects for applying rapid prototype development skills in real time Embedded Systems and Robotics with Open-Source Tools effectively demonstrates that, with the help of high-performance microprocessors, microcontrollers, and highly optimized algorithms, one can develop smarter embedded devices.
