Download or read book Embedded Control System Design written by Alexandru Forrai and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control system design is a challenging task for practicing engineers. It requires knowledge of different engineering fields, a good understanding of technical specifications and good communication skills. The current book introduces the reader into practical control system design, bridging the gap between theory and practice. The control design techniques presented in the book are all model based., considering the needs and possibilities of practicing engineers. Classical control design techniques are reviewed and methods are presented how to verify the robustness of the design. It is how the designed control algorithm can be implemented in real-time and tested, fulfilling different safety requirements. Good design practices and the systematic software development process are emphasized in the book according to the generic standard IEC61508. The book is mainly addressed to practicing control and embedded software engineers - working in research and development – as well as graduate students who are faced with the challenge to design control systems and implement them in real-time.
Download or read book Design of Embedded Control Systems written by Marian Andrzej Adamski and published by Springer Science & Business Media. This book was released on 2005-06-28 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: A set of original results in the ?eld of high-level design of logical control devices and systems is presented in this book. These concern different aspects of such important and long-term design problems, including the following, which seem to be the main ones. First, the behavior of a device under design must be described properly, and some adequate formal language should be chosen for that. Second, effective algorithmsshouldbeusedforcheckingtheprepareddescriptionforcorrectness, foritssyntacticandsemanticveri?cationattheinitialbehaviorlevel.Third,the problem of logic circuit implementation must be solved using some concrete technological base; ef?cient methods of logic synthesis, test, and veri?cation should be developed for that. Fourth, the task of the communication between the control device and controlled objects (and maybe between different control devices)waitsforitssolution.Alltheseproblemsarehardenoughandcannotbe successfully solved without ef?cient methods and algorithms oriented toward computer implementation. Some of these are described in this book. The languages used for behavior description have been descended usually from two well-known abstract models which became classic: Petri nets and ?nite state machines (FSMs). Anyhow, more detailed versions are developed and described in the book, which enable to give more complete information concerningspeci?cqualitiesoftheregardedsystems.Forexample,themodelof parallelautomatonispresented,whichunliketheconventional?niteautomaton can be placed simultaneously into several places, calledpartial. As a base for circuit implementation of control algorithms, FPGA is accepted in majority of cases.
Download or read book Distributed Embedded Control Systems written by Matjaž Colnaric and published by Springer Science & Business Media. This book was released on 2007-11-21 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fascinating new work comes complete with more than 100 illustrations and a detailed practical prototype. It explores the domains encountered when designing a distributed embedded computer control system as an integrated whole. Basic issues about real-time systems and their properties, especially safety, are examined first. Then, system and hardware architectures are dealt with, along with programming issues, embodying desired properties, basic language subsets, object orientation and language support for hardware and software specifications.
Download or read book Reconfigurable Embedded Control Systems Applications for Flexibility and Agility written by Khalgui, Mohamed and published by IGI Global. This book was released on 2010-11-30 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book addresses the development of reconfigurable embedded control systems and describes various problems in this important research area, which include static and dynamic (manual or automatic) reconfigurations, multi-agent architectures, modeling and verification, component-based approaches, architecture description languages, distributed reconfigurable architectures, real-time and low power scheduling, execution models, and the implementation of such systems"--
Download or read book Handbook of Networked and Embedded Control Systems written by Dimitrios Hristu-Varsakelis and published by Springer Science & Business Media. This book was released on 2007-11-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.
Download or read book Embedded Controller Hardware Design written by Ken Arnold and published by Newnes. This book was released on 2001 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Review of electronics fundamentals -- Microcontroller concepts -- Worst-case timing, loading, analysis, and design -- Memory technologies and interfacing -- CPU bus interface and timing -- A detailed design example -- Programmable logic devices -- Basic I/O interfaces -- Other interfaces and bus cycles -- Other useful stuff -- Other interfaces.
Download or read book Applied Control Theory for Embedded Systems written by Tim Wescott and published by Elsevier. This book was released on 2011-03-31 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many embedded engineers and programmers who need to implement basic process or motion control as part of a product design do not have formal training or experience in control system theory. Although some projects require advanced and very sophisticated control systems expertise, the majority of embedded control problems can be solved without resorting to heavy math and complicated control theory. However, existing texts on the subject are highly mathematical and theoretical and do not offer practical examples for embedded designers. This book is different;it presents mathematical background with sufficient rigor for an engineering text, but it concentrates on providing practical application examples that can be used to design working systems, without needing to fully understand the math and high-level theory operating behind the scenes. The author, an engineer with many years of experience in the application of control system theory to embedded designs, offers a concise presentation of the basics of control theory as it pertains to an embedded environment. - Practical, down-to-earth guide teaches engineers to apply practical control theorems without needing to employ rigorous math - Covers the latest concepts in control systems with embedded digital controllers
Download or read book Embedded System Design on a Shoestring written by Lewin Edwards and published by Elsevier. This book was released on 2003-06-02 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this practical guide, experienced embedded engineer Lewin Edwards demonstrates faster, lower-cost methods for developing high-end embedded systems. With today's tight schedules and lower budgets, embedded designers are under greater pressure to deliver prototypes and system designs faster and cheaper. Edwards demonstrates how the use of the right tools and operating systems can make seemingly impossible deadlines possible. Designer's Guide to Embedded Systems Development shares many advanced, in-the-trenches design secrets to help engineers achieve better performance on the job. In particular, it covers many of the newer design tools supported by the GPL (GNU Public License) system. Code examples are given to provide concrete illustrations of tasks described in the text. The general procedures are applicable to many possible projects based on any 16/32-bit microcontroller. The book covers choosing the right architecture and development hardware to fit the project; choosing an operating system and developing a toolchain; evaluating software licenses and how they affect a project; step-by-step building instructions for gcc, binutils, gdb and newlib for the ARM7 core used in the case study project; prototyping techniques using a custom printed circuit board; debugging tips; and portability considerations. A wealth of practical tips, tricks and techniques Design better, faster and more cost-effectively
Download or read book Embedded Systems Design for High Speed Data Acquisition and Control written by Maurizio Di Paolo Emilio and published by Springer. This book was released on 2014-09-01 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a practical guide for practicing engineers who need to design embedded systems for high-speed data acquisition and control systems. A minimum amount of theory is presented, along with a review of analog and digital electronics, followed by detailed explanations of essential topics in hardware design and software development. The discussion of hardware focuses on microcontroller design (ARM microcontrollers and FPGAs), techniques of embedded design, high speed data acquisition (DAQ) and control systems. Coverage of software development includes main programming techniques, culminating in the study of real-time operating systems. All concepts are introduced in a manner to be highly-accessible to practicing engineers and lead to the practical implementation of an embedded board that can be used in various industrial fields as a control system and high speed data acquisition system.
Download or read book Fast and Effective Embedded Systems Design written by Tim Wilmshurst and published by Elsevier. This book was released on 2012-07-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fast and Effective Embedded Systems Design is a fast-moving introduction to embedded system design, applying the innovative ARM mbed and its web-based development environment. Each chapter introduces a major topic in embedded systems, and proceeds as a series of practical experiments, adopting a "learning through doing" strategy. Minimal background knowledge is needed. C/C++ programming is applied, with a step-by-step approach which allows the novice to get coding quickly. Once the basics are covered, the book progresses to some "hot" embedded issues – intelligent instrumentation, networked systems, closed loop control, and digital signal processing. Written by two experts in the field, this book reflects on the experimental results, develops and matches theory to practice, evaluates the strengths and weaknesses of the technology or technique introduced, and considers applications and the wider context. Numerous exercises and end of chapter questions are included. - A hands-on introduction to the field of embedded systems, with a focus on fast prototyping - Key embedded system concepts covered through simple and effective experimentation - Amazing breadth of coverage, from simple digital i/o, to advanced networking and control - Applies the most accessible tools available in the embedded world - Supported by mbed and book web sites, containing FAQs and all code examples - Deep insights into ARM technology, and aspects of microcontroller architecture - Instructor support available, including power point slides, and solutions to questions and exercises
Download or read book Making Embedded Systems written by Elecia White and published by "O'Reilly Media, Inc.". This book was released on 2011-10-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interested in developing embedded systems? Since they donâ??t tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert whoâ??s created embedded systems ranging from urban surveillance and DNA scanners to childrenâ??s toys, this book is ideal for intermediate and experienced programmers, no matter what platform you use. Optimize your system to reduce cost and increase performance Develop an architecture that makes your software robust in resource-constrained environments Explore sensors, motors, and other I/O devices Do more with less: reduce RAM consumption, code space, processor cycles, and power consumption Learn how to update embedded code directly in the processor Discover how to implement complex mathematics on small processors Understand what interviewers look for when you apply for an embedded systems job "Making Embedded Systems is the book for a C programmer who wants to enter the fun (and lucrative) world of embedded systems. Itâ??s very well writtenâ??entertaining, evenâ??and filled with clear illustrations." â??Jack Ganssle, author and embedded system expert.
Download or read book Design of Embedded Robust Control Systems Using MATLAB Simulink written by Petko Hristov Petkov and published by Institution of Engineering and Technology. This book was released on 2018-04-25 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust control theory allows for changes in a system whilst maintaining stability and performance. Applications of this technique are very important for dependable embedded systems, making technologies such as drones and other autonomous systems with sophisticated embedded controllers and systems relatively common-place.
Download or read book A First Course in Control System Design written by Kamran Iqbal and published by CRC Press. This book was released on 2022-09-01 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control systems are pervasive in our lives. Our homes have environmental controls. The appliances we use, such as the washing machine, microwave, etc. carry embedded controllers in them. We fly in airplanes and drive automobiles that extensively use control systems. The industrial plants that produce consumer goods run on process control systems. The recent drive toward automation has increased our reliance on control systems technology.This book discusses control systems design from a model-based perspective for dynamic system models of single-input single-output type. The emphasis in this book is on understanding and applying the techniques that enable the design of effective control systems in multiple engineering disciplines. The book covers both time-domain and the frequency-domain design methods, as well as controller design for both continuous-time and discrete-time systems. MATLAB© and its Control Systems Toolbox are extensively used for design.
Download or read book Embedded System Design written by Peter Marwedel and published by Springer Science & Business Media. This book was released on 2010-11-16 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Until the late 1980s, information processing was associated with large mainframe computers and huge tape drives. During the 1990s, this trend shifted toward information processing with personal computers, or PCs. The trend toward miniaturization continues and in the future the majority of information processing systems will be small mobile computers, many of which will be embedded into larger products and interfaced to the physical environment. Hence, these kinds of systems are called embedded systems. Embedded systems together with their physical environment are called cyber-physical systems. Examples include systems such as transportation and fabrication equipment. It is expected that the total market volume of embedded systems will be significantly larger than that of traditional information processing systems such as PCs and mainframes. Embedded systems share a number of common characteristics. For example, they must be dependable, efficient, meet real-time constraints and require customized user interfaces (instead of generic keyboard and mouse interfaces). Therefore, it makes sense to consider common principles of embedded system design. Embedded System Design starts with an introduction into the area and a survey of specification models and languages for embedded and cyber-physical systems. It provides a brief overview of hardware devices used for such systems and presents the essentials of system software for embedded systems, like real-time operating systems. The book also discusses evaluation and validation techniques for embedded systems. Furthermore, the book presents an overview of techniques for mapping applications to execution platforms. Due to the importance of resource efficiency, the book also contains a selected set of optimization techniques for embedded systems, including special compilation techniques. The book closes with a brief survey on testing. Embedded System Design can be used as a text book for courses on embedded systems and as a source which provides pointers to relevant material in the area for PhD students and teachers. It assumes a basic knowledge of information processing hardware and software. Courseware related to this book is available at http://ls12-www.cs.tu-dortmund.de/~marwedel.
Download or read book Embedded System Design written by Frank Vahid and published by John Wiley & Sons. This book was released on 2001-10-17 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces a modern approach to embedded system design, presenting software design and hardware design in a unified manner. It covers trends and challenges, introduces the design and use of single-purpose processors ("hardware") and general-purpose processors ("software"), describes memories and buses, illustrates hardware/software tradeoffs using a digital camera example, and discusses advanced computation models, controls systems, chip technologies, and modern design tools. For courses found in EE, CS and other engineering departments.
Download or read book Embedded Systems written by Krzysztof Iniewski and published by John Wiley & Sons. This book was released on 2012-10-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the significant embedded computing technologies highlighting their applications in wireless communication and computing power An embedded system is a computer system designed for specific control functions within a larger system often with real-time computing constraints. It is embedded as part of a complete device often including hardware and mechanical parts. Presented in three parts, Embedded Systems: Hardware, Design, and Implementation provides readers with an immersive introduction to this rapidly growing segment of the computer industry. Acknowledging the fact that embedded systems control many of today's most common devices such as smart phones, PC tablets, as well as hardware embedded in cars, TVs, and even refrigerators and heating systems, the book starts with a basic introduction to embedded computing systems. It hones in on system-on-a-chip (SoC), multiprocessor system-on-chip (MPSoC), and network-on-chip (NoC). It then covers on-chip integration of software and custom hardware accelerators, as well as fabric flexibility, custom architectures, and the multiple I/O standards that facilitate PCB integration. Next, it focuses on the technologies associated with embedded computing systems, going over the basics of field-programmable gate array (FPGA), digital signal processing (DSP) and application-specific integrated circuit (ASIC) technology, architectural support for on-chip integration of custom accelerators with processors, and O/S support for these systems. Finally, it offers full details on architecture, testability, and computer-aided design (CAD) support for embedded systems, soft processors, heterogeneous resources, and on-chip storage before concluding with coverage of software support in particular, O/S Linux. Embedded Systems: Hardware, Design, and Implementation is an ideal book for design engineers looking to optimize and reduce the size and cost of embedded system products and increase their reliability and performance.
Download or read book Introduction to Embedded System Design Using Field Programmable Gate Arrays written by Rahul Dubey and published by Springer. This book was released on 2010-10-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Introduction to Embedded System Design Using Field Programmable Gate Arrays" provides a starting point for the use of field programmable gate arrays in the design of embedded systems. The text considers a hypothetical robot controller as an embedded application and weaves around it related concepts of FPGA-based digital design. The book details: use of FPGA vis-à-vis general purpose processor and microcontroller; design using Verilog hardware description language; digital design synthesis using Verilog and Xilinx® SpartanTM 3 FPGA; FPGA-based embedded processors and peripherals; overview of serial data communications and signal conditioning using FPGA; FPGA-based motor drive controllers; and prototyping digital systems using FPGA. The book is a good introductory text for FPGA-based design for both students and digital systems designers. Its end-of-chapter exercises and frequent use of example can be used for teaching or for self-study.
