Download or read book Embedded and Networking Systems written by Gul N. Khan and published by CRC Press. This book was released on 2017-07-12 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded and Networking Systems: Design, Software, and Implementation explores issues related to the design and synthesis of high-performance embedded computer systems and networks. The emphasis is on the fundamental concepts and analytical techniques that are applicable to a range of embedded and networking applications, rather than on specific embedded architectures, software development, or system-level integration. This system point of view guides designers in dealing with the trade-offs to optimize performance, power, cost, and other system-level non-functional requirements. The book brings together contributions by researchers and experts from around the world, offering a global view of the latest research and development in embedded and networking systems. Chapters highlight the evolution and trends in the field and supply a fundamental and analytical understanding of some underlying technologies. Topics include the co-design of embedded systems, code optimization for a variety of applications, power and performance trade-offs, benchmarks for evaluating embedded systems and their components, and mobile sensor network systems. The book also looks at novel applications such as mobile sensor systems and video networks. A comprehensive review of groundbreaking technology and applications, this book is a timely resource for system designers, researchers, and students interested in the possibilities of embedded and networking systems. It gives readers a better understanding of an emerging technology evolution that is helping drive telecommunications into the next decade.

Download or read book Handbook of Networked and Embedded Control Systems written by Dimitrios Hristu-Varsakelis and published by Springer Science & Business Media. This book was released on 2007-11-14 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of control systems built today are embedded; that is, they rely on built-in, special-purpose digital computers to close their feedback loops. Embedded systems are common in aircraft, factories, chemical processing plants, and even in cars–a single high-end automobile may contain over eighty different computers. The design of embedded controllers and of the intricate, automated communication networks that support them raises many new questions—practical, as well as theoretical—about network protocols, compatibility of operating systems, and ways to maximize the effectiveness of the embedded hardware. This handbook, the first of its kind, provides engineers, computer scientists, mathematicians, and students a broad, comprehensive source of information and technology to address many questions and aspects of embedded and networked control. Separated into six main sections—Fundamentals, Hardware, Software, Theory, Networking, and Applications—this work unifies into a single reference many scattered articles, websites, and specification sheets. Also included are case studies, experiments, and examples that give a multifaceted view of the subject, encompassing computation and communication considerations.

Download or read book Embedded and Networking Systems written by Gul N. Khan and published by CRC Press. This book was released on 2017-07-12 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded and Networking Systems: Design, Software, and Implementation explores issues related to the design and synthesis of high-performance embedded computer systems and networks. The emphasis is on the fundamental concepts and analytical techniques that are applicable to a range of embedded and networking applications, rather than on specific embedded architectures, software development, or system-level integration. This system point of view guides designers in dealing with the trade-offs to optimize performance, power, cost, and other system-level non-functional requirements. The book brings together contributions by researchers and experts from around the world, offering a global view of the latest research and development in embedded and networking systems. Chapters highlight the evolution and trends in the field and supply a fundamental and analytical understanding of some underlying technologies. Topics include the co-design of embedded systems, code optimization for a variety of applications, power and performance trade-offs, benchmarks for evaluating embedded systems and their components, and mobile sensor network systems. The book also looks at novel applications such as mobile sensor systems and video networks. A comprehensive review of groundbreaking technology and applications, this book is a timely resource for system designers, researchers, and students interested in the possibilities of embedded and networking systems. It gives readers a better understanding of an emerging technology evolution that is helping drive telecommunications into the next decade.

Download or read book TCP IP Embedded Internet Applications written by Edward Insam and published by Elsevier. This book was released on 2003-09-04 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introducing the technology from square one through real-world design applications, this book will significantly reduce R&D time - and spend. Eddie Insam's approach to the internet protocols TCP/IP is to explore their potential as a practical tool for design engineers building web communication and capabilities into embedded systems for the next generation of electronic products.Eddie Insam introduces the range of possibilities open to internet-enabled designs, including automated fault and low-stock notification, remote environmental control, control of test and measurement equipment, and programming responses based on data collected locally. These techniques are introduced as they key to a new level of interactivity between customer and manufacturer or service provider as well as a the means for users to communicate with electronic devices in increasingly useful and user-friendly ways. These new opportunities are introduced with the level of practical detail required for electronic designers getting to grips with turning the next phase of the internet revolution into reality.The scope of this book encompasses electronic design, networking applications and wireless applications using Bluetooth and 802.11 (WiFi). The case studies are not based on one specific device, but listings are provided where required.*An engineer's approach to internet protocols and applications*Reduces R&D time for design engineers*The design guide for the cutting edge of internet-enabled electronic products and systems

Download or read book Embedded Networking with CAN and CANopen written by Olaf Pfeiffer and published by Copperhill Media. This book was released on 2008 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: CAN (Controller Area Network) is a serial communication protocol that was originally developed for the automobile industry. CAN is far superior to conventional serial technologies such as RS232 in regards to functionality and reliability and yet CAN implementations are more cost effective. CANopen, a higher layer protocol based on CAN, provides the means to apply the ingenious CAN features to a variety of industrial-strength applications. Many users, for example in the field of medical engineering, opted for CANopen because they have to meet particularly stringent safety requirements. Similar requirements had to be considered by manufacturers of other equipment with very high safety or reliability requirements (e.g. robots, lifts and transportation systems). Providing a detailed look at both CAN and CANopen, this book examines those technologies in the context of embedded networks. There is an overview of general embedded networking and an introduction to the primary functionality provided by CANopen. Everything one needs to know to configure and operate a CANopen network using off-the-shelf components is described, along with details for those designers who want to build their own CANopen nodes. The wide variety of applications for CAN and CANopen is discussed, and instructions in developing embedded networks based on the protocol are included. In addition, references and examples using MicroCANopen, PCANopen Magic, and Vector's high-end development tools are provided.

Download or read book Implementing 802 11 with Microcontrollers Wireless Networking for Embedded Systems Designers written by Fred Eady and published by Elsevier. This book was released on 2005-10-18 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless networking is poised to have a massive impact on communications, and the 802.11 standard is to wireless networking what Ethernet is to wired networking. There are already over 50 million devices using the dominant IEEE 802.11 (essentially wireless Ethernet) standard, with astronomical growth predicted over the next 10 years. New applications are emerging every day, with wireless capability being embedded in everything from electric meters to hospital patient tracking systems to security devices. This practical reference guides readers through the wireless technology forest, giving them the knowledge, the hardware and the software necessary to design a wireless embedded device rapidly, inexpensively, and effectively. Using off-the-shelf microcontrollers from Microchip and Atmel, the author provides step-by-step instructions for designing the hardware and firmware for a fully operational wireless networking device. The book gives a thorough introduction to 802.11 technology and puts it into perspective against the other wireless standard options. Just enough theory and mathematics is provided to give the depth of understanding needed for practical design work. The book thoroughly covers: * Laptop wireless Ethernet card introduction and theory *Introduction to CompactFlash-to-microcontroller interfacing* Implementing the laptop wireless Ethernet card in an embedded environment - Covers the hottest new embedded market area- wireless networking - Shows designers how to save money and time by using microcontrollers in their embedded wireless designs instead of expensive, complex prefab boards

Download or read book Embedded Systems Design Using the Rabbit 3000 Microprocessor written by Kamal Hyder and published by Newnes. This book was released on 2004-11-29 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Rabbit 3000 is a popular high-performance microprocessor specifically designed for embedded control, communications, and Ethernet connectivity. This new technical reference book will help designers get the most out of the Rabbit's powerful feature set. The first book on the market to focus exclusively on the Rabbit 3000, it provides detailed coverage of: Rabbit architecture and development environment, interfacing to the external world, networking, Rabbit assembly language, multitasking, debugging, Dynamic C and much more! Authors Kamal Hyder and Bob Perrin are embedded engineers with years of experience and they offer a wealth of design details and "insider" tips and techniques. Extensive embedded design examples are supported by fully tested source code. Whether you're already working with the Rabbit or considering it for a future design, this is one reference you can't be without! Let the experts teach you how to design embedded systems that efficiently hook up to the Internet using networked core modules Provides a number of projects and source code using RabbitCore, which will make it easy for the system designer and programmer to get hands-on experience developing networked devices

Download or read book Introduction to Embedded Systems Second Edition written by Edward Ashford Lee and published by MIT Press. This book was released on 2017-01-06 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the engineering principles of embedded systems, with a focus on modeling, design, and analysis of cyber-physical systems. The most visible use of computers and software is processing information for human consumption. The vast majority of computers in use, however, are much less visible. They run the engine, brakes, seatbelts, airbag, and audio system in your car. They digitally encode your voice and construct a radio signal to send it from your cell phone to a base station. They command robots on a factory floor, power generation in a power plant, processes in a chemical plant, and traffic lights in a city. These less visible computers are called embedded systems, and the software they run is called embedded software. The principal challenges in designing and analyzing embedded systems stem from their interaction with physical processes. This book takes a cyber-physical approach to embedded systems, introducing the engineering concepts underlying embedded systems as a technology and as a subject of study. The focus is on modeling, design, and analysis of cyber-physical systems, which integrate computation, networking, and physical processes. The second edition offers two new chapters, several new exercises, and other improvements. The book can be used as a textbook at the advanced undergraduate or introductory graduate level and as a professional reference for practicing engineers and computer scientists. Readers should have some familiarity with machine structures, computer programming, basic discrete mathematics and algorithms, and signals and systems.

Download or read book Embedded Systems Security written by David Kleidermacher and published by Elsevier. This book was released on 2012-03-16 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Front Cover; Dedication; Embedded Systems Security: Practical Methods for Safe and Secure Softwareand Systems Development; Copyright; Contents; Foreword; Preface; About this Book; Audience; Organization; Approach; Acknowledgements; Chapter 1 -- Introduction to Embedded Systems Security; 1.1What is Security?; 1.2What is an Embedded System?; 1.3Embedded Security Trends; 1.4Security Policies; 1.5Security Threats; 1.6Wrap-up; 1.7Key Points; 1.8 Bibliography and Notes; Chapter 2 -- Systems Software Considerations; 2.1The Role of the Operating System; 2.2Multiple Independent Levels of Security.

Download or read book Modern Embedded Computing written by Peter Barry and published by Elsevier. This book was released on 2012-01-27 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern embedded systems are used for connected, media-rich, and highly integrated handheld devices such as mobile phones, digital cameras, and MP3 players. This book provides an understanding of the platform architecture of modern embedded computing systems that drive mobile devices.

Download or read book Designing Embedded Systems and the Internet of Things IoT with the ARM mbed written by Perry Xiao and published by John Wiley & Sons. This book was released on 2018-06-08 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and accessible introduction to the development of embedded systems and Internet of Things devices using ARM mbed Designing Embedded Systems and the Internet of Things (IoT) with the ARM mbed offers an accessible guide to the development of ARM mbed and includes a range of topics on the subject from the basic to the advanced. ARM mbed is a platform and operating system based on 32-bit ARM Cortex-M microcontrollers. This important resource puts the focus on ARM mbed NXP LPC1768 and FRDM-K64F evaluation boards. NXP LPC1768 has powerful features such as a fast microcontroller, various digital and analog I/Os, various serial communication interfaces and a very easy to use Web based compiler. It is one of the most popular kits that are used to study and create projects. FRDM-K64F is relatively new and largely compatible with NXP LPC1768 but with even more powerful features. This approachable text is an ideal guide that is divided into four sections; Getting Started with the ARM mbed, Covering the Basics, Advanced Topics and Case Studies. This getting started guide: Offers a clear introduction to the topic Contains a wealth of original and illustrative case studies Includes a practical guide to the development of projects with the ARM mbed platform Presents timely coverage of how to develop IoT applications Designing Embedded Systems and the Internet of Things (IoT) with the ARM mbed offers students and R&D engineers a resource for understanding the ARM mbed NXP LPC1768 evaluation board.

Download or read book Real Time Embedded Systems written by Meikang Qiu and published by CRC Press. This book was released on 2011-06-01 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ubiquitous in today's consumer-driven society, embedded systems use microprocessors that are hidden in our everyday products and designed to perform specific tasks. Effective use of these embedded systems requires engineers to be proficient in all phases of this effort, from planning, design, and analysis to manufacturing and marketing.Taking a sys

Download or read book Design Principles for Embedded Systems written by KCS Murti and published by Springer Nature. This book was released on 2021-09-20 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to serve as a textbook for courses offered to graduate and undergraduate students enrolled in electronics and electrical engineering and computer science. This book attempts to bridge the gap between electronics and computer science students, providing complementary knowledge that is essential for designing an embedded system. The book covers key concepts tailored for embedded system design in one place. The topics covered in this book are models and architectures, Executable Specific Languages – SystemC, Unified Modeling Language, real-time systems, real-time operating systems, networked embedded systems, Embedded Processor architectures, and platforms that are secured and energy-efficient. A major segment of embedded systems needs hard real-time requirements. This textbook includes real-time concepts including algorithms and real-time operating system standards like POSIX threads. Embedded systems are mostly distributed and networked for deterministic responses. The book covers how to design networked embedded systems with appropriate protocols for real-time requirements. Each chapter contains 2-3 solved case studies and 10 real-world problems as exercises to provide detailed coverage and essential pedagogical tools that make this an ideal textbook for students enrolled in electrical and electronics engineering and computer science programs.

Download or read book Embedded Ethernet and Internet Complete written by Jan Axelson and published by lakeview research llc. This book was released on 2003 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Create tiny web servers and use TCP/IP to communicate over local networks and the Internet.

Download or read book Embedded Systems Architecture written by Tammy Noergaard and published by Newnes. This book was released on 2012-12-31 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems Architecture is a practical and technical guide to understanding the components that make up an embedded system's architecture. This book is perfect for those starting out as technical professionals such as engineers, programmers and designers of embedded systems; and also for students of computer science, computer engineering and electrical engineering. It gives a much-needed 'big picture' for recently graduated engineers grappling with understanding the design of real-world systems for the first time, and provides professionals with a systems-level picture of the key elements that can go into an embedded design, providing a firm foundation on which to build their skills. - Real-world approach to the fundamentals, as well as the design and architecture process, makes this book a popular reference for the daunted or the inexperienced: if in doubt, the answer is in here! - Fully updated with new coverage of FPGAs, testing, middleware and the latest programming techniques in C, plus complete source code and sample code, reference designs and tools online make this the complete package - Visit the companion web site at http://booksite.elsevier.com/9780123821966/ for source code, design examples, data sheets and more - A true introductory book, provides a comprehensive get up and running reference for those new to the field, and updating skills: assumes no prior knowledge beyond undergrad level electrical engineering - Addresses the needs of practicing engineers, enabling it to get to the point more directly, and cover more ground. Covers hardware, software and middleware in a single volume - Includes a library of design examples and design tools, plus a complete set of source code and embedded systems design tutorial materials from companion website

Download or read book Embedded Systems and Wireless Technology written by Raul A. Santos and published by CRC Press. This book was released on 2012-06-22 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential of embedded systems ranges from the simplicity of sharing digital media to the coordination of a variety of complex joint actions carried out between collections of networked devices. The book explores the emerging use of embedded systems and wireless technologies from theoretical and practical applications and their applications in agriculture, environment, public health, domotics, and public transportation, among others.

Download or read book Embedded Internet Design written by Al Williams and published by McGraw Hill Professional. This book was released on 2003 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: *Explores how to make microcontroller systems that are Internet-active*Covers both Java-enabled modules and stand-alone microcontroller designs*An excellent introduction to web technology basics for hardware designers.