Download or read book Electronic Waves Transmission Line Circuit Design written by Matthew M. Radmanesh and published by AuthorHouse. This book was released on 2011-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces concepts on a wide range of materials and has several advantages over existing texts, including: 1. The presentation of a series of scientific postulates and laws of RF and microwaves, which lay the foundation for the behavior of waves and their propagation on transmission lines, is unique to this book compared with similar RF and Microwave texts. 2. The presentation of classical laws and principles of electricity and magnetism, all inter-related, conceptually and graphically. 3. There is a shift of emphasis from rigorous mathematical solutions of Maxwell's equations, and instead has been aptly placed on simple yet fundamental concepts that underlie these equations. This shift of emphasis will promote a deeper understanding of the electronics, particularly at RF/Microwave frequencies. 4. Wave propagation in free space and tramsmission lines has been amply treated from a totally new standpoint. Designing RF/Microwave passive circuits using the Smith Chart as covered in this book becomes a systematic and yet pleasant task, which can easily be duplicated by any practitioner in the field. 5. New technical terms are precisely defined as they are first introduced, thereby keeping the subject matter in focus and preventing misunderstanding, and 6. Finally the abundant use of graphical illustrations and diagrams brings a great deal of clarity and conceptual understanding, enabling difficult concepts to be understood with ease. The fundamentals of RF and microwave electronics can be mastered visually, through many tested practical examples in the book and in the accompanying CD using Microsoft Excel (R) environment. This book is perfect for RF/microwave newcomers or industry veterans! The material is presented lucidly and effectively through worked practical examples using both clear-cut math and vivid illustrations, which help the reader gain practical knowledge in passive circuit design using the Smith Chart.

Download or read book Electronic Waves Transmission Line Circuit Design written by Matthew M. Radmanesh and published by AuthorHouse. This book was released on 2011-04 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces concepts on a wide range of materials and has several advantages over existing texts, including: 1. The presentation of a series of scientific postulates and laws of RF and microwaves, which lay the foundation for the behavior of waves and their propagation on transmission lines, is unique to this book compared with similar RF and Microwave texts. 2. The presentation of classical laws and principles of electricity and magnetism, all inter-related, conceptually and graphically. 3. There is a shift of emphasis from rigorous mathematical solutions of Maxwell's equations, and instead has been aptly placed on simple yet fundamental concepts that underlie these equations. This shift of emphasis will promote a deeper understanding of the electronics, particularly at RF/Microwave frequencies. 4. Wave propagation in free space and tramsmission lines has been amply treated from a totally new standpoint. Designing RF/Microwave passive circuits using the Smith Chart as covered in this book becomes a systematic and yet pleasant task, which can easily be duplicated by any practitioner in the field. 5. New technical terms are precisely defined as they are first introduced, thereby keeping the subject matter in focus and preventing misunderstanding, and 6. Finally the abundant use of graphical illustrations and diagrams brings a great deal of clarity and conceptual understanding, enabling difficult concepts to be understood with ease. The fundamentals of RF and microwave electronics can be mastered visually, through many tested practical examples in the book and in the accompanying CD using Microsoft Excel (R) environment. This book is perfect for RF/microwave newcomers or industry veterans! The material is presented lucidly and effectively through worked practical examples using both clear-cut math and vivid illustrations, which help the reader gain practical knowledge in passive circuit design using the Smith Chart.

Download or read book Transmission Lines and Lumped Circuits written by Giovanni Miano and published by Elsevier. This book was released on 2001-02-23 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of transmission lines is a classical topic of electrical engineering. Recently this topic has received renewed attention and has been a focus of considerable research. This is because the transmisson line theory has found new and important applications in the area of high-speed VLSI interconnects, while it has retained its significance in the area of power transmission. In many applications, transmission lines are connected to nonlinear circuits. For instance, interconnects of high-speed VLSI chips can be modelled as transmission lines loaded with nonlinear elements. These nonlinearities may lead to many new effects such as instability, chaos, generation of higher order harmonics, etc. The mathematical models of transmission lines with nonlinear loads consist of the linear partial differential equations describing the current and voltage dynamics along the lines together with the nonlinear boundary conditions imposed by the nonlinear loads connected to the lines. These nonlinear boundary conditions make the mathematical treatment very difficult. For this reason, the analysis of transmission lines with nonlinear loads has not been addressed adequately in the existing literature. The unique and distinct feature of the proposed book is that it will present systematic, comprehensive, and in-depth analysis of transmission lines with nonlinear loads. - A unified approach for the analysis of networks composed of distributed and lumped circuits - A simple, concise and completely general way to present the wave propagation on transmission lines, including a thorough study of the line equations in characteristic form - Frequency and time domain multiport representations of any linear transmission line - A detailed analysis of the influence on the line characterization of the frequency and space dependence of the line parameters - A rigorous study of the properties of the analytical and numerical solutions of the network equations - The associated discrete circuits and the associated resisitive circuits of transmission lines - Periodic solutions, bifurcations and chaos in transmission lines connected to noninear lumped circuits

Download or read book Electromagnetic and Circuit Modelling of Multiconductor Transmission Lines written by Niels Faché and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiconductor transmission lines form the basic building blocks of microwave and millimeter-wave integrated circuits, and are omnipresent in digital systems. This book gives a detailed account of the way in which self-consistent computer-aided-design circuit models for such coupled lines, carrying either TEM or hybrid modes, can be obtained from a full-wave solution of Maxwell's equations. Latest advances for lossy lines are covered. The book also details the full-wave integral equation solution for basic transmission structures on MMICs, PCBs, and multiwire and microwire boards with the method of moments. For thin coupled microstrips and striplines the proposed space domain solution offers an alternative to the classical spectral domain approach. This book is the first to handle the full-wave analysis of discrete wire structures and of lossy polygonal conductors. The book is sure to appeal to a wide range of electrical and electronics engineers.

Download or read book RF and Microwave Circuit Design written by Charles E. Free and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF and Microwave Circuit Design Provides up-to-date coverage of the fundamentals of high-frequency microwave technology, written by two leading voices in the field RF and Microwave Circuit Design: Theory and Applications is an authoritative, highly practical introduction to basic RF and microwave circuits. With an emphasis on real-world examples, the text explains how distributed circuits using microstrip and other planar transmission lines can be designed and fabricated for use in modern high-frequency passive and active circuits and sub-systems. The authors provide clear and accurate guidance on each essential aspect of circuit design, from the theory of transmission lines to the passive and active circuits that form the basis of modern high-frequency circuits and sub-systems. Assuming a basic grasp of electronic concepts, the book is organized around first principles and includes an extensive set of worked examples to guide student readers with no prior grounding in the subject of high-frequency microwave technology. Throughout the text, detailed coverage of practical design using distributed circuits demonstrates the influence of modern fabrication processes. Filling a significant gap in literature by addressing RF and microwave circuit design with a central theme of planar distributed circuits, this textbook: Provides comprehensive discussion of the foundational concepts of RF and microwave transmission lines introduced through an exploration of wave propagation along a typical transmission line Describes fabrication processes for RF and microwave circuits, including etched, thick-film, and thin-film RF circuits Covers the Smith Chart and its application in circuit design, S-parameters, Mason???s non-touching loop rule, transducer power gain, and stability Discusses the influence of noise in high-frequency circuits and low-noise amplifier design Features an introduction to the design of high-frequency planar antennas Contains supporting chapters on fabrication, circuit parameters, and measurements Includes access to a companion website with PowerPoint slides for instructors, as well as supplementary resources Perfect for senior undergraduate students and first-year graduate students in electrical engineering courses, RF and Microwave Circuit Design: Theory and Applications will also earn a place in the libraries of RF and microwave professionals looking for a useful reference to refresh their understanding of fundamental concepts in the field.

Download or read book Artificial Transmission Lines for RF and Microwave Applications written by Ferran Martín and published by John Wiley & Sons. This book was released on 2015-07-13 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents and discusses alternatives to ordinary transmission lines for the design and implementation of advanced RF/microwave components in planar technology. This book is devoted to the analysis, study and applications of artificial transmission lines mostly implemented by means of a host line conveniently modified (e.g., with modulation of transverse dimensions, with etched patterns in the metallic layers, etc.) or with reactive loading, in order to achieve novel device functionalities, superior performance, and/or reduced size. The author begins with an introductory chapter dedicated to the fundamentals of planar transmission lines. Chapter 2 is focused on artificial transmission lines based on periodic structures (including non-uniform transmission lines and reactively-loaded lines), and provides a comprehensive analysis of the coupled mode theory. Chapters 3 and 4 are dedicated to artificial transmission lines inspired by metamaterials, or based on metamaterial concepts. These chapters include the main practical implementations of such lines and their circuit models, and a wide overview of their RF/microwave applications (including passive and active circuits and antennas). Chapter 5 focuses on reconfigurable devices based on tunable artificial lines, and on non-linear transmission lines. The chapter also introduces several materials and components to achieve tuning, including diode varactors, RF-MEMS, ferroelectrics, and liquid crystals. Finally, Chapter 6 covers other advanced transmission lines and wave guiding structures, such as electroinductive-/magnetoinductive-wave lines, common-mode suppressed balanced lines, lattice-network artificial lines, and substrate integrated waveguides. Artificial Transmission Lines for RF and Microwave Applications provides an in-depth analysis and discussion of artificial transmission lines, including design guidelines that can be useful to researchers, engineers and students.

Download or read book Electromagnetics Microwave Circuit and Antenna Design for Communications Engineering written by Peter Russer and published by Artech House. This book was released on 2003 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: If you're looking for a clear, comprehensive overview of basic electromagnetics principles and applications to antenna and microwave circuit design for communications, this authoritative book is your best choice. Including concise explanations of all required mathematical concepts needed to fully comprehend the material, the book is your complete resource for understanding electromagnetics in current, emerging and future broadband communication systems, as well as high-speed analogue and digital electronic circuits and systems.

Download or read book Transmission Lines in Digital and Analog Electronic Systems written by Clayton R. Paul and published by John Wiley & Sons. This book was released on 2010-09-07 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last 30 years there have been dramatic changes in electrical technology--yet the length of the undergraduate curriculum has remained four years. Until some ten years ago, the analysis of transmission lines was a standard topic in the EE and CpE undergraduate curricula. Today most of the undergraduate curricula contain a rather brief study of the analysis of transmission lines in a one-semester junior-level course on electromagnetics. In some schools, this study of transmission lines is relegated to a senior technical elective or has disappeared from the curriculum altogether. This raises a serious problem in the preparation of EE and CpE undergraduates to be competent in the modern industrial world. For the reasons mentioned above, today's undergraduates lack the basic skills to design high-speed digital and high-frequency analog systems. It does little good to write sophisticated software if the hardware is unable to process the instructions. This problem will increase as the speeds and frequencies of these systems continue to increase seemingly without bound. This book is meant to repair that basic deficiency.

Download or read book Fundamentals of Microwave and RF Design written by Michael Steer and published by NC State University. This book was released on 2019-09 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Microwave and RF Design enables mastery of the essential concepts required to cross the barriers to a successful career in microwave and RF design. Extensive treatment of scattering parameters, that naturally describe power flow, and of Smith-chart-based design procedures prepare the student for success. The emphasis is on design at the module level and on covering the whole range of microwave functions available. The orientation is towards using microstrip transmission line technologies and on gaining essential mathematical, graphical and design skills for module design proficiency. This book is derived from a multi volume comprehensive book series, Microwave and RF Design, Volumes 1-5, with the emphasis in this book being on presenting the fundamental materials required to gain entry to RF and microwave design. This book closely parallels the companion series that can be consulted for in-depth analysis with referencing of the book series being familiar and welcoming. Key Features * A companion volume to a comprehensive series on microwave and RF design * Open access ebook editions are hosted by NC State University Libraries at https://repository.lib.ncsu.edu/handle/1840.20/36776 * 59 worked examples * An average of 24 exercises per chapter * Answers to selected exercises * Emphasis on module-level design using microstrip technologies * Extensive treatment of design using Smith charts * A parallel companion book series provides a detailed reference resource

Download or read book Digital Circuit Boards written by Ralph Morrison and published by John Wiley & Sons. This book was released on 2012-05-29 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique, practical approach to the design of high-speed digital circuit boards The demand for ever-faster digital circuit designs is beginning to render the circuit theory used by engineers ineffective. Digital Circuit Boards presents an alternative to the circuit theory approach, emphasizing energy flow rather than just signal interconnection to explain logic circuit behavior. The book shows how treating design in terms of transmission lines will ensure that the logic will function, addressing both storage and movement of electrical energy on these lines. It covers transmission lines in all forms to illustrate how trace geometry defines where the signals can travel, then goes on to examine transmission lines as energy sources, the true nature of decoupling, types of resonances, ground bounce, cross talk, and more. Providing designers with the tools they need to lay out digital circuit boards for fast logic and to get designs working the first time around, Digital Circuit Boards: Reviews in simple terms the basic physics necessary to understand fast logic design Debunks the idea that electrical conductors carry power and signals, showing that signal travels in the spaces, not the traces, of circuit boards Explains logic circuit behavior through real-time analysis involving the fields and waves that carry signal and energy Provides new information on how ground/power planes work Outlines a software program for solving energy flow in complex networks

Download or read book Electromagnetics Volume 1 BETA written by Steven W. Ellingson and published by VT Publishing. This book was released on 2018-01-03 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetics (CC BY-SA 4.0) is an open textbook intended to serve as a primary textbook for a one-semester first course in undergraduate engineering electromagnetics, and includes:electric and magnetic fields; electromagnetic properties of materials; electromagnetic waves; and devices that operate according to associated electromagnetic principles including resistors,capacitors, inductors, transformers, generators, and transmission lines. This book employs the "transmission lines first" approach, in which transmission lines are introduced using a lumped-element equivalent circuit model fora differential length of transmission line, leading to one-dimensional wave equations for voltage and current. This book is intended for electrical engineering students in the third year of a bachelor of science degree program. A free electronic version of this book is available at: https://doi.org/10.7294/W4WQ01ZM

Download or read book PSpice for Filters and Transmission Lines written by Paul Tobin and published by Morgan & Claypool Publishers. This book was released on 2007 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, PSpice for Filters and Transmission Lines, we examine a range of active and passive filters where each design is simulated using the latest Cadence Orcad V10.5 PSpice capture software. These filters cannot match the very high order digital signal processing (DSP) filters considered in PSpice for Digital Signal Processing, but nevertheless these filters have many uses. The active filters considered were designed using Butterworth and Chebychev approximation loss functions rather than using the 'cookbook approach' so that the final design will meet a given specification in an exacting manner. Switched-capacitor filter circuits are examined and here we see how useful PSpice/Probe is in demonstrating how these filters, filter, as it were. Two-port networks are discussed as an introduction to transmission lines and, using a series of problems, we demonstrate quarter-wave and single-stub matching. The concept of time domain reflectrometry as a fault location tool on transmission lines is then examined. In the last chapter we discuss the technique of importing and exporting speech signals into a PSpice schematic using a tailored-made program Wav2ascii. This is a novel technique that greatly extends the simulation boundaries of PSpice. Various digital circuits are also examined at the end of this chapter to demonstrate the use of the bus structure and other techniques.

Download or read book Radio Frequency Integrated Circuit Engineering written by Cam Nguyen and published by John Wiley & Sons. This book was released on 2015-03-03 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radio-Frequency Integrated-Circuit Engineering addresses the theory, analysis and design of passive and active RFIC's using Si-based CMOS and Bi-CMOS technologies, and other non-silicon based technologies. The materials covered are self-contained and presented in such detail that allows readers with only undergraduate electrical engineering knowledge in EM, RF, and circuits to understand and design RFICs. Organized into sixteen chapters, blending analog and microwave engineering, Radio-Frequency Integrated-Circuit Engineering emphasizes the microwave engineering approach for RFICs. * Provides essential knowledge in EM and microwave engineering, passive and active RFICs, RFIC analysis and design techniques, and RF systems vital for RFIC students and engineers * Blends analog and microwave engineering approaches for RFIC design at high frequencies * Includes problems at the end of each chapter

Download or read book Metamaterial Surface Plasmon Based Transmission Lines and Antennas written by Amin Kianinejad and published by Springer. This book was released on 2018-03-30 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis proposes a reliable and repeatable method for implementing Spoof Surface Plasmon (SSP) modes in the design of various circuit components. It also presents the first equivalent circuit model for plasmonic structures, which serves as an insightful guide to designing SSP-based circuits. Today, electronic circuits and systems are developing rapidly and becoming an indispensable part of our daily life; however the issue of compactness in integrated circuits remains a formidable challenge. Recently, the Spoof Surface Plasmon (SSP) modes have been proposed as a novel platform for highly compact electronic circuits. Despite extensive research efforts in this area, there is still an urgent need for a systematic design method for plasmonic circuits. In this thesis, different SSP-based transmission lines, antenna feeding networks and antennas are designed and experimentally evaluated. With their high field confinement, the SSPs do not suffer from the compactness limitations of traditional circuits and are capable of providing an alternative platform for the future generation of electronic circuits and electromagnetic systems.

Download or read book Understanding Electromagnetic Waves written by Ming-Seng Kao and published by Springer Nature. This book was released on 2020-07-14 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This one-semester textbook teaches students Electromagnetic Waves, via an early introduction to Maxwell’s Equations in the first chapter. Mathematics fundamentals are used as needed, but rigor is de-emphasized in preference to understanding the basic ideas and principles of EM waves. Each chapter includes extensive, step-by-step, solved examples, as well as abundant exercises. Designed for a one-semester course in electromagnetic waves; Introduces Maxwell’s equations in the first chapter; De-emphasizes mathematical rigor in order to make key ideas and principles easy to understand; Makes material accessible to readers of varying backgrounds, with extensive use of solved examples; Includes abundant exercises for each chapter.

Download or read book Introduction To Modern Planar Transmission Lines written by Anand K. Verma and published by John Wiley & Sons. This book was released on 2021-06-02 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive discussion of planar transmission lines and their applications, focusing on physical understanding, analytical approach, and circuit models Planar transmission lines form the core of the modern high-frequency communication, computer, and other related technology. This advanced text gives a complete overview of the technology and acts as a comprehensive tool for radio frequency (RF) engineers that reflects a linear discussion of the subject from fundamentals to more complex arguments. Introduction to Modern Planar Transmission Lines: Physical, Analytical, and Circuit Models Approach begins with a discussion of waves on transmission lines and waves in material medium, including a large number of illustrative examples from published results. After explaining the electrical properties of dielectric media, the book moves on to the details of various transmission lines including waveguide, microstrip line, co-planar waveguide, strip line, slot line, and coupled transmission lines. A number of special and advanced topics are discussed in later chapters, such as fabrication of planar transmission lines, static variational methods for planar transmission lines, multilayer planar transmission lines, spectral domain analysis, resonators, periodic lines and surfaces, and metamaterial realization and circuit models. Emphasizes modeling using physical concepts, circuit-models, closed-form expressions, and full derivation of a large number of expressions Explains advanced mathematical treatment, such as the variation method, conformal mapping method, and SDA Connects each section of the text with forward and backward cross-referencing to aid in personalized self-study Introduction to Modern Planar Transmission Lines is an ideal book for senior undergraduate and graduate students of the subject. It will also appeal to new researchers with the inter-disciplinary background, as well as to engineers and professionals in industries utilizing RF/microwave technologies.

Download or read book Practical Microstrip and Printed Antenna Design written by Anil Pandey and published by Artech House. This book was released on 2019-03-31 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource presents antenna fundamentals balanced with the design of printed antennas. Over 70 antenna projects, along with design dimensions, design flows and antenna performance results are discussed, including antennas for wireless communication, 5G antennas and beamforming. Examples of smartphone antennas, MIMO antennas, aerospace and satellite remote sensing array antennas, automotive antennas and radar systems and many more printed antennas for various applications are also included. These projects include design dimensions and parameters that incorporate the various techniques used by industries and academia. This book is intended to serve as a practical microstrip and printed antenna design guide to cover various real-world applications. All Antenna projects discussed in this book are designed, analyzed and simulated using full-wave electromagnetic solvers. Based on several years of the author’s research in antenna design and development for RF and microwave applications, this book offers an in-depth coverage of practical printed antenna design methodology for modern applications.