Download or read book Electronic Components and Technology written by Stephen Sangwine and published by CRC Press. This book was released on 2018-10-03 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most introductory textbooks in electronics focus on the theory while leaving the practical aspects to be covered in laboratory courses. However, the sooner such matters are introduced, the better able students will be to include such important concerns as parasitic effects and reliability at the very earliest stages of design. This philosophy has kept Electronic Components and Technology thriving for two decades, and this completely updated third edition continues the approach with a more international outlook. Not only does this textbook introduce the properties, behavior, fabrication, and use of electronic components, it also helps students grasp and apply sound engineering practice by incorporating in-depth discussions on topics such as safety and reliability. The author employs a holistic treatment that clearly demonstrates how electronic components and subsystems work together, reinforcing the concepts with numerous examples, case studies, problems, illustrations, and objectives. This edition was updated to reflect advances and changes to industrial practice, including packaging technologies, digital oscilloscopes, lead-free solders, and new battery technologies. Additionally, the text's scope now extends to include terminology and standards used worldwide. Including coverage of topics often ignored in other textbooks on the subject, Electronic Components and Technology, Third Edition encourages students to be better, more thoughtful designers and prepares them with current industrial practices.
Download or read book Make Electronics written by Charles Platt and published by . This book was released on 2015-09-07 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: "A hands-on primer for the new electronics enthusiast"--Cover.
Download or read book Electronic Components Technology 2nd Edition written by S. J. Sangwine and published by CRC Press. This book was released on 1994-06-30 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception, the Tutorial Guides in Electronic Engineering series has met with great success among both instructors and students. Designed for first and second year undergraduate courses, each text provides a concise list of objectives at the beginning of every chapter, key definitions and formulas highlighted in margin notes, and references to other texts in the series. Electronic Components and Technology begins with an introduction to electronic interconnection technology, followed by a concise study of integrated circuits, their fabrication, packaging, and handling. The next two chapters look at various components, including power supplies, resistors, capacitors, and inductors. The author devotes considerable attention to parasitic electrical effects, including the non-ideal properties of passive components, heat and its management, and parasitic electromagnetic effects. He also emphasizes good engineering practice in relation to reliability and maintainability--two important aspects of design often overlooked by circuit designers--and includes a chapter on safety. This volume not only builds a solid foundation in properties, behavior, and use of electronic components, but also opens students' eyes to the practical problems encountered in electronics engineering practice.
Download or read book Electrical Components A Complete Reference for Project Builders written by Delton T. Horn and published by McGraw Hill Professional. This book was released on 1991-08-22 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: A one-stop source of practical information on virtually every kind of electronic component and its working characteristics, specifications, and uses.
Download or read book Electronic Components and Technology written by Stephen Sangwine and published by CRC Press. This book was released on 2018-10-03 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most introductory textbooks in electronics focus on the theory while leaving the practical aspects to be covered in laboratory courses. However, the sooner such matters are introduced, the better able students will be to include such important concerns as parasitic effects and reliability at the very earliest stages of design. This philosophy has kept Electronic Components and Technology thriving for two decades, and this completely updated third edition continues the approach with a more international outlook. Not only does this textbook introduce the properties, behavior, fabrication, and use of electronic components, it also helps students grasp and apply sound engineering practice by incorporating in-depth discussions on topics such as safety and reliability. The author employs a holistic treatment that clearly demonstrates how electronic components and subsystems work together, reinforcing the concepts with numerous examples, case studies, problems, illustrations, and objectives. This edition was updated to reflect advances and changes to industrial practice, including packaging technologies, digital oscilloscopes, lead-free solders, and new battery technologies. Additionally, the text's scope now extends to include terminology and standards used worldwide. Including coverage of topics often ignored in other textbooks on the subject, Electronic Components and Technology, Third Edition encourages students to be better, more thoughtful designers and prepares them with current industrial practices.
Download or read book Passive Electronic Component Handbook written by Charles A. Harper and published by McGraw Hill Professional. This book was released on 1997 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Definitive Technical Resource on Passive Components! Here's the fully updated and revised edition of the most comprehensive standard reference on electronic components--and the first such revision in over 15 years! It gives electronics engineers, designers, and technicians quick, reliable one-volume access to critical characteristic data, performance curves, and design guidelines. The full range of component technologies is covered, including resistors, capacitors, transformers, relays and switches, batteries, fuse and protective components, filters and transient voltage protection devices, wiring and cabling, connectors, and enabling devices. More than a mere rehashing of manufacturer specs, this unique handbook provides working electronics professionals and mechanical engineers with the practical data they need to more effectively select optimal components for their intended functional performance in virtually any electronics system. Along with its companion volume, the Active Electronic Component Handbook, this resource belongs on every designer's bookshelf.
Download or read book Make Electronics written by Charles Platt and published by "O'Reilly Media, Inc.". This book was released on 2009-11-23 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is teaching at its best!" --Hans Camenzind, inventor of the 555 timer (the world's most successful integrated circuit), and author of Much Ado About Almost Nothing: Man's Encounter with the Electron (Booklocker.com) "A fabulous book: well written, well paced, fun, and informative. I also love the sense of humor. It's very good at disarming the fear. And it's gorgeous. I'll be recommending this book highly." --Tom Igoe, author of Physical Computing and Making Things Talk Want to learn the fundamentals of electronics in a fun, hands-on way? With Make: Electronics, you'll start working on real projects as soon as you crack open the book. Explore all of the key components and essential principles through a series of fascinating experiments. You'll build the circuits first, then learn the theory behind them! Build working devices, from simple to complex You'll start with the basics and then move on to more complicated projects. Go from switching circuits to integrated circuits, and from simple alarms to programmable microcontrollers. Step-by-step instructions and more than 500 full-color photographs and illustrations will help you use -- and understand -- electronics concepts and techniques. Discover by breaking things: experiment with components and learn from failure Set up a tricked-out project space: make a work area at home, equipped with the tools and parts you'll need Learn about key electronic components and their functions within a circuit Create an intrusion alarm, holiday lights, wearable electronic jewelry, audio processors, a reflex tester, and a combination lock Build an autonomous robot cart that can sense its environment and avoid obstacles Get clear, easy-to-understand explanations of what you're doing and why
Download or read book Encyclopedia of Electronic Components Volume 1 written by Charles Platt and published by "O'Reilly Media, Inc.". This book was released on 2012-10-26 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Power sources & conversion: resistors, capacitors, inductors, switches, encoders, relays, transistors"--Cover.
Download or read book Reliability and Failure of Electronic Materials and Devices written by Milton Ohring and published by Academic Press. This book was released on 2014-10-14 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability and Failure of Electronic Materials and Devices is a well-established and well-regarded reference work offering unique, single-source coverage of most major topics related to the performance and failure of materials used in electronic devices and electronics packaging. With a focus on statistically predicting failure and product yields, this book can help the design engineer, manufacturing engineer, and quality control engineer all better understand the common mechanisms that lead to electronics materials failures, including dielectric breakdown, hot-electron effects, and radiation damage. This new edition adds cutting-edge knowledge gained both in research labs and on the manufacturing floor, with new sections on plastics and other new packaging materials, new testing procedures, and new coverage of MEMS devices. Covers all major types of electronics materials degradation and their causes, including dielectric breakdown, hot-electron effects, electrostatic discharge, corrosion, and failure of contacts and solder joints New updated sections on "failure physics," on mass transport-induced failure in copper and low-k dielectrics, and on reliability of lead-free/reduced-lead solder connections New chapter on testing procedures, sample handling and sample selection, and experimental design Coverage of new packaging materials, including plastics and composites
Download or read book Easy Electronics written by Charles Platt and published by Maker Media, Inc.. This book was released on 2017-11-21 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the simplest, quickest, least technical, most affordable introduction to basic electronics. No tools are necessary--not even a screwdriver. Easy Electronics should satisfy anyone who has felt frustrated by entry-level books that are not as clear and simple as they are supposed to be. Brilliantly clear graphics will take you step by step through 12 basic projects, none of which should take more than half an hour. Using alligator clips to connect components, you see and hear immediateresults. The hands-on approach is fun and intriguing, especially for family members exploring the projects together. The 12 experiments will introduce you to switches, resistors, capacitors, transistors, phototransistors, LEDs, audio transducers, and a silicon chip. You'll even learn how to read schematics by comparing them with the circuits that you build. No prior knowledge is required, and no math is involved. You learn by seeing, hearing, and touching. By the end of Experiment 12, you may be eager to move on to a more detailed book. Easy Electronics will function perfectly as a prequel to the same author's bestseller, Make: Electronics. All the components listed in the book are inexpensive and readily available from online sellers. A very affordable kit has been developed in conjunction with the book to eliminate the chore of shopping for separate parts. A QR code inside the book will take you to the vendor's web site. Concepts include: Transistor as a switch or an amplifier Phototransistor to function as an alarm Capacitor to store and release electricity Transducer to create sounds from a timer Resistor codes A miniature light bulb to display voltage The inner workings of a switch Using batteries and resistors in series and parallel Creating sounds by the pressure of your finger Making a matchbox that beeps when you touch it And more. Grab your copy and start experimenting!
Download or read book Adhesives Technology for Electronic Applications written by James J. Licari and published by William Andrew. This book was released on 2011-06-24 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.512 pagesApprox.512 pages
Download or read book Electronics All in One For Dummies UK written by Dickon Ross and published by John Wiley & Sons. This book was released on 2014-08-25 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your one-stop UK shop for clear, concise explanations to all the important concepts in electronics and tons of direction for building simple, fun electronic projects. The 8 mini-books in this 1 volume include: Getting Started with Electronics Working with Basic Components Working with Integrated Circuits Getting into Alternating Current Working with Radio and Infrared Doing Digital Electronics Working with Basic Stamp Processors Building Special Effects With nearly 900 pages of instruction, Electronics All-in-One For Dummies, UK Edition covers all the bases and provides a fascinating hands-on exploration of electronics.
Download or read book Make More Electronics written by Charles Platt and published by Make Books. This book was released on 2014-05-24 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shares step-by-step experiments that teach how to add computational power to projects, including light bars, timers, decoders, phototransistors, op-amps, and various sensors.
Download or read book Fundamentals of Electronics 1 written by Pierre Muret and published by John Wiley & Sons. This book was released on 2017-08-09 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics has undergone important and rapid developments over the last 60 years, which have generated a large range of theoretical and practical notions. This book presents a comprehensive treatise of the evolution of electronics for the reader to grasp both fundamental concepts and the associated practical applications through examples and exercises. This first volume of the Fundamentals of Electronics series comprises four chapters devoted to elementary devices, i.e. diodes, bipolar junction transistors and related devices, field effect transistors and amplifiers, their electrical models and the basic functions they can achieve. Volumes to come will deal with systems in the continuous time regime, the various aspects of sampling signals and systems using analog (A) and digital (D) treatments, quantized level systems, as well as DA and AD converter principles and realizations.
Download or read book Nanoelectronics and Information Technology written by Rainer Waser and published by John Wiley & Sons. This book was released on 2012-05-29 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fachlich auf höchstem Niveau, visuell überzeugend und durchgängig farbig illustriert: Das ist die neue Auflage der praxisbewährten Einführung in spezialisierte elektronische Materialien und Bauelemente aus der Informationstechnologie. Über ein Drittel des Inhalts ist neu, alle anderen Beiträge wurden gründlich überarbeitet und aktualisiert.
Download or read book Electronic and Electrical Servicing Level 3 written by John Dunton and published by Routledge. This book was released on 2007-12-04 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic and Electrical Servicing – Level 3 follows on from the Level 2 book and covers the more advanced electronics and electrical principles required by service engineers servicing home entertainment equipment such as TVs, CD and DVD machines, as well as commercial equipment including PCs. All the core units of the Level 3 Progression Award in Electrical and Electronics Servicing (Consumer/Commercial Electronics) from City & Guilds (C&G 6958) are covered. The book also offers a fully up-to-date course text for the City & Guilds 1687 NVQ at Level 3. The book contains numerous worked examples to help students grasp the principles. Each chapter ends with review questions, for which answers are provided at the end of the book, so that students can check their learning. Units covered: Unit 1 – Electronic principles Unit 2 – Test and measurement Unit 3 – Analogue electronics Unit 4 – Digital electronics Ian Sinclair has been an author of market-leading books for electronic servicing courses for over 20 years, helping many thousands of students through their college course and NVQs into successful careers. Now with a new co-author, John Dunton, the new edition has been brought fully up-to-date to reflect the most recent technical advances and developments within the service engineering industry, in particular with regard to television and PC servicing and technology. Level 2 book: Electronic and Electrical Servicing, ISBN 978-0-7506-6988-7, covers the 5 core units at Level 2, plus the option units Radio and television systems technology (Unit 6) and PC technology (Unit 8).
Download or read book Practical Electronics written by J. M. Hughes and published by "O'Reilly Media, Inc.". This book was released on 2015-03-16 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: How much do you need to know about electronics to create something interesting, or creatively modify something that already exists? If you’d like to build an electronic device, but don’t have much experience with electronics components, this hands-on workbench reference helps you find answers to technical questions quickly. Filling the gap between a beginner’s primer and a formal textbook, Practical Electronics explores aspects of electronic components, techniques, and tools that you would typically learn on the job and from years of experience. Even if you’ve worked with electronics or have a background in electronics theory, you’re bound to find important information that you may not have encountered before. Among the book’s many topics, you’ll discover how to: Read and understand the datasheet for an electronic component Use uncommon but inexpensive tools to achieve more professional-looking results Select the appropriate analog and digital ICs for your project Select and assemble various types of connectors Do basic reverse engineering on a device in order to modify (hack) it Use open source tools for schematic capture and PCB layout Make smart choices when buying new or used test equipment
