Download or read book Electrical Characterization of Organic Electronic Materials and Devices written by Professor Peter Stallinga and published by John Wiley & Sons. This book was released on 2009-10-08 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Think like an electron Organic electronic materials have many applications and potential in low-cost electronics such as electronic barcodes and in light emitting devices, due to their easily tailored properties. While the chemical aspects and characterization have been widely studied, characterization of the electrical properties has been neglected, and classic textbook modeling has been applied. This is most striking in the analysis of thin-film transistors (TFTs) using thick “bulk” transistor (MOS-FET) descriptions. At first glance the TFTs appear to behave as regular MOS-FETs. However, upon closer examination it is clear that TFTs are unique and merit their own model. Understanding and interpreting measurements of organic devices, which are often seen as black-box measurements, is critical to developing better devices and this, therefore, has to be done with care. Electrical Characterization of Organic Electronic Materials and Devices Gives new insights into the electronic properties and measurement techniques for low-mobility electronic devices Characterizes the thin-film transistor using its own model Links the phenomena seen in different device structures and different measurement techniques Presents clearly both how to perform electrical measurements of organic and low-mobility materials and how to extract important information from these measurements Provides a much-needed theoretical foundation for organic electronics

Download or read book Characterization of Semiconductor Heterostructures and Nanostructures written by Giovanni Agostini and published by Elsevier. This book was released on 2011-08-11 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last couple of decades, high-performance electronic and optoelectronic devices based on semiconductor heterostructures have been required to obtain increasingly strict and well-defined performances, needing a detailed control, at the atomic level, of the structural composition of the buried interfaces. This goal has been achieved by an improvement of the epitaxial growth techniques and by the parallel use of increasingly sophisticated characterization techniques and of refined theoretical models based on ab initio approaches. This book deals with description of both characterization techniques and theoretical models needed to understand and predict the structural and electronic properties of semiconductor heterostructures and nanostructures. - Comprehensive collection of the most powerful characterization techniques for semiconductor heterostructures and nanostructures - Most of the chapters are authored by scientists that are among the top 10 worldwide in publication ranking of the specific field - Each chapter starts with a didactic introduction on the technique - The second part of each chapter deals with a selection of top examples highlighting the power of the specific technique to analyze the properties of semiconductors

Download or read book Microwave Electronics written by L. F. Chen and published by John Wiley & Sons. This book was released on 2004-11-19 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of high speed, high frequency circuits and systems requires an understanding of the properties of materials functioning at the microwave level. This comprehensive reference sets out to address this requirement by providing guidance on the development of suitable measurement methodologies tailored for a variety of materials and application systems. Bringing together coverage of a broad range of techniques in one publication for the first time, this book: Provides a comprehensive introduction to microwave theory and microwave measurement techniques. Examines every aspect of microwave material properties, circuit design and applications. Presents materials property characterisation methods along with a discussion of the underlying theory. Outlines the importance of microwave absorbers in the reduction in noise levels in microwave circuits and their importance within defence industry applications. Relates each measurement technique to its application across the fields of microwave engineering, high-speed electronics, remote sensing and the physical sciences. This book will appeal to practising engineers and technicians working in the areas of RF, microwaves, communications, solid-state devices and radar. Senior students, researchers in microwave engineering and microelectronics and material scientists will also find this book a very useful reference.

Download or read book Semiconductor Material and Device Characterization written by Dieter K. Schroder and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition updates a landmark text with the latest findings The Third Edition of the internationally lauded Semiconductor Material and Device Characterization brings the text fully up-to-date with the latest developments in the field and includes new pedagogical tools to assist readers. Not only does the Third Edition set forth all the latest measurement techniques, but it also examines new interpretations and new applications of existing techniques. Semiconductor Material and Device Characterization remains the sole text dedicated to characterization techniques for measuring semiconductor materials and devices. Coverage includes the full range of electrical and optical characterization methods, including the more specialized chemical and physical techniques. Readers familiar with the previous two editions will discover a thoroughly revised and updated Third Edition, including: Updated and revised figures and examples reflecting the most current data and information 260 new references offering access to the latest research and discussions in specialized topics New problems and review questions at the end of each chapter to test readers' understanding of the material In addition, readers will find fully updated and revised sections in each chapter. Plus, two new chapters have been added: Charge-Based and Probe Characterization introduces charge-based measurement and Kelvin probes. This chapter also examines probe-based measurements, including scanning capacitance, scanning Kelvin force, scanning spreading resistance, and ballistic electron emission microscopy. Reliability and Failure Analysis examines failure times and distribution functions, and discusses electromigration, hot carriers, gate oxide integrity, negative bias temperature instability, stress-induced leakage current, and electrostatic discharge. Written by an internationally recognized authority in the field, Semiconductor Material and Device Characterization remains essential reading for graduate students as well as for professionals working in the field of semiconductor devices and materials. An Instructor's Manual presenting detailed solutions to all the problems in the book is available from the Wiley editorial department.

Download or read book Materials Characterization Using Nondestructive Evaluation NDE Methods written by Gerhard Huebschen and published by Woodhead Publishing. This book was released on 2016-03-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Characterization Using Nondestructive Evaluation (NDE) Methods discusses NDT methods and how they are highly desirable for both long-term monitoring and short-term assessment of materials, providing crucial early warning that the fatigue life of a material has elapsed, thus helping to prevent service failures. Materials Characterization Using Nondestructive Evaluation (NDE) Methods gives an overview of established and new NDT techniques for the characterization of materials, with a focus on materials used in the automotive, aerospace, power plants, and infrastructure construction industries. Each chapter focuses on a different NDT technique and indicates the potential of the method by selected examples of applications. Methods covered include scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques. The authors review both the determination of microstructure properties, including phase content and grain size, and the determination of mechanical properties, such as hardness, toughness, yield strength, texture, and residual stress. - Gives an overview of established and new NDT techniques, including scanning and transmission electron microscopy, X-ray microtomography and diffraction, ultrasonic, electromagnetic, microwave, and hybrid techniques - Reviews the determination of microstructural and mechanical properties - Focuses on materials used in the automotive, aerospace, power plants, and infrastructure construction industries - Serves as a highly desirable resource for both long-term monitoring and short-term assessment of materials

Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.

Download or read book The Electrical Characterization of Semiconductors written by Peter Blood and published by . This book was released on 1992 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the physical principles behind experimental techniques used for measuring the electrical properties of semiconductors. The principles involved are illustrated by reference to selected examples drawn from the world of semiconductor materials.

Download or read book Nanocharacterization Techniques written by Osvaldo de Oliveira Jr and published by William Andrew. This book was released on 2017-03-18 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocharacterization Techniques covers the main characterization techniques used in nanomaterials and nanostructures. The chapters focus on the fundamental aspects of characterization techniques and their distinctive approaches. Significant advances that have taken place over recent years in refining techniques are covered, and the mathematical foundations needed to use the techniques are also explained in detail. This book is an important reference for materials scientists and engineers looking for a through analysis of nanocharacterization techniques in order to establish which is best for their needs. - Includes a detailed analysis of different nanocharacterization techniques, allowing readers to explore which one is best for their particular needs - Provides examples of how each characterization technique has been used, giving readers a greater understanding of how each technique can be profitably used - Covers the mathematical background needed to utilize each of these techniques to their best effect, meaning that readers can gain a full understanding of the theoretical principles behind each technique covered - Serves as an important, go-to reference for materials scientists and engineers

Download or read book Encyclopedia of Materials Characterization written by Charles A. Evans and published by Gulf Professional Publishing. This book was released on 1992 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This is a comprehensive volume on analytical techniques used in materials science for the characterization of surfaces, interfaces and thin films. This flagship volume is a unique, stand-alone reference for materials science practitioners, process engineers, students and anyone with a need to know about the capabilities available in materials analysis. An encyclopedia of 50 concise articles, this book will also be a practical companion to the forthcoming books in the series."--Knovel.

Download or read book Chemical Structural and Electronic Analysis of Heterogeneous Surfaces on Nanometer Scale written by R. Rosei and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: An assessment of the recent achievements and relative strengths of two developing techniques for characterising surfaces at the nanometer scale: (i) local probe methods, including scanning tunnelling microscopy and its derivatives; and (ii) nanoscale photoemission and absorption spectroscopy for chemical analysis. The keynote lectures were delivered by some of the world's best scientists in the field and some of the topics covered include: (1) The possible application of STM in atomically resolved chemical analysis. (2) The principles of scanning force/friction and scanning near-field optical microscopes. (3) The scanning photoemission electron microscopes built at ELETTRA and SRRC, with a description of synchrotron radiation microscopy. (4) Recent progress in the development of spatially-resolved photoelectron microscopy, especially the use of zone plate photon optics. (5) The present status of non-scanning photoemission microscopy with slow electrons. (6) the BESSY 2 project for a non-scanning photoelectron microscope with electron optics. (7) Spatially-resolved in situ reaction studies of chemical waves and oscillatory phenomena with the UV photoemission microscope.

Download or read book Microstructural Characterization of Materials written by David Brandon and published by John Wiley & Sons. This book was released on 2013-03-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microstructural characterization is usually achieved by allowing some form of probe to interact with a carefully prepared specimen. The most commonly used probes are visible light, X-ray radiation, a high-energy electron beam, or a sharp, flexible needle. These four types of probe form the basis for optical microscopy, X-ray diffraction, electron microscopy, and scanning probe microscopy. Microstructural Characterization of Materials, 2nd Edition is an introduction to the expertise involved in assessing the microstructure of engineering materials and to the experimental methods used for this purpose. Similar to the first edition, this 2nd edition explores the methodology of materials characterization under the three headings of crystal structure, microstructural morphology, and microanalysis. The principal methods of characterization, including diffraction analysis, optical microscopy, electron microscopy, and chemical microanalytical techniques are treated both qualitatively and quantitatively. An additional chapter has been added to the new edition to cover surface probe microscopy, and there are new sections on digital image recording and analysis, orientation imaging microscopy, focused ion-beam instruments, atom-probe microscopy, and 3-D image reconstruction. As well as being fully updated, this second edition also includes revised and expanded examples and exercises, with a solutions manual available at http://develop.wiley.co.uk/microstructural2e/ Microstructural Characterization of Materials, 2nd Edition will appeal to senior undergraduate and graduate students of material science, materials engineering, and materials chemistry, as well as to qualified engineers and more advanced researchers, who will find the book a useful and comprehensive general reference source.

Download or read book In Situ Characterization of Thin Film Growth written by Gertjan Koster and published by Elsevier. This book was released on 2011-10-05 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced techniques for characterizing thin film growth in situ help to develop improved understanding and faster diagnosis of issues with the process. In situ characterization of thin film growth reviews current and developing techniques for characterizing the growth of thin films, covering an important gap in research.Part one covers electron diffraction techniques for in situ study of thin film growth, including chapters on topics such as reflection high-energy electron diffraction (RHEED) and inelastic scattering techniques. Part two focuses on photoemission techniques, with chapters covering ultraviolet photoemission spectroscopy (UPS), X-ray photoelectron spectroscopy (XPS) and in situ spectroscopic ellipsometry for characterization of thin film growth. Finally, part three discusses alternative in situ characterization techniques. Chapters focus on topics such as ion beam surface characterization, real time in situ surface monitoring of thin film growth, deposition vapour monitoring and the use of surface x-ray diffraction for studying epitaxial film growth.With its distinguished editors and international team of contributors, In situ characterization of thin film growth is a standard reference for materials scientists and engineers in the electronics and photonics industries, as well as all those with an academic research interest in this area. - Chapters review electron diffraction techniques, including the methodology for observations and measurements - Discusses the principles and applications of photoemission techniques - Examines alternative in situ characterisation techniques

Download or read book Modeling Analysis Design and Tests for Electronics Packaging beyond Moore written by Hengyun Zhang and published by Woodhead Publishing. This book was released on 2019-11-14 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, Analysis, Design and Testing for Electronics Packaging Beyond Moore provides an overview of electrical, thermal and thermomechanical modeling, analysis, design and testing for 2.5D/3D. The book addresses important topics, including electrically and thermally induced issues, such as EMI and thermal issues, which are crucial to package signal and thermal integrity. It also covers modeling methods to address thermomechanical stress related to the package structural integrity. In addition, practical design and test techniques for packages and systems are included. - Includes advanced modeling and analysis methods and techniques for state-of-the art electronics packaging - Features experimental characterization and qualifications for the analysis and verification of electronic packaging design - Provides multiphysics modeling and analysis techniques of electronic packaging

Download or read book Transmission Electron Microscopy Characterization of Nanomaterials written by Challa S.S.R. Kumar and published by Springer Science & Business Media. This book was released on 2013-12-09 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third volume of a 40volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Transmission electron microscopy characterization of nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.

Download or read book Handbook of Instrumentation and Techniques for Semiconductor Nanostructure Characterization written by Richard Haight and published by World Scientific. This book was released on 2012 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: As we delve more deeply into the physics and chemistry of functional materials and processes, we are inexorably driven to the nanoscale. And nowhere is the development of instrumentation and associated techniques more important to scientific progress than in the area of nanoscience. The dramatic expansion of efforts to peer into nanoscale materials and processes has made it critical to capture and summarize the cutting-edge instrumentation and techniques that have become indispensable for scientific investigation in this arena. This Handbook is a key resource developed for scientists, engineers and advanced graduate students in which eminent scientists present the forefront of instrumentation and techniques for the study of structural, optical and electronic properties of semiconductor nanostructures.

Download or read book Environmental Monitoring and Characterization written by Janick Artiola and published by Elsevier. This book was released on 2004-06-10 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Monitoring and Characterization is an integrated, hands-on resource for monitoring all aspects of the environment. Sample collection methods and relevant physical, chemical and biological processes necessary to characterize the environment are brought together in twenty chapters which cover: sample collection methods, monitoring terrestrial, aquatic and air environments, and relevant chemical, physical and biological processes and contaminants. This book will serve as an authoritative reference for advanced students and environmental professionals. - Examines the integration of physical, chemical, and biological processes - Emphasizes field methods and real-time data acquisition, made more accessible with case studies, problems, calculations, and questions - Includes four color illustrations throughout the text - Brings together the concepts of environmental monitoring and site characterization

Download or read book Three Dimensional Integrated Circuit Design written by Vasilis F. Pavlidis and published by Newnes. This book was released on 2017-07-04 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three-Dimensional Integrated Circuit Design, Second Eition, expands the original with more than twice as much new content, adding the latest developments in circuit models, temperature considerations, power management, memory issues, and heterogeneous integration. 3-D IC experts Pavlidis, Savidis, and Friedman cover the full product development cycle throughout the book, emphasizing not only physical design, but also algorithms and system-level considerations to increase speed while conserving energy. A handy, comprehensive reference or a practical design guide, this book provides effective solutions to specific challenging problems concerning the design of three-dimensional integrated circuits. Expanded with new chapters and updates throughout based on the latest research in 3-D integration: - Manufacturing techniques for 3-D ICs with TSVs - Electrical modeling and closed-form expressions of through silicon vias - Substrate noise coupling in heterogeneous 3-D ICs - Design of 3-D ICs with inductive links - Synchronization in 3-D ICs - Variation effects on 3-D ICs - Correlation of WID variations for intra-tier buffers and wires - Offers practical guidance on designing 3-D heterogeneous systems - Provides power delivery of 3-D ICs - Demonstrates the use of 3-D ICs within heterogeneous systems that include a variety of materials, devices, processors, GPU-CPU integration, and more - Provides experimental case studies in power delivery, synchronization, and thermal characterization