Download or read book Applications Of X ray Photoelectron Spectroscopy To Catalytic Studies From Routine Analysis To Cutting edge Surface Characterization written by Spyridon Zafeiratos and published by World Scientific. This book was released on 2023-07-04 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray photoelectron spectroscopy (XPS) has become a standard practice technique, and automated XPS facilities can be found in industry and in universities all over the world. This transformed XPS from an advanced characterization method for dedicated research, to a rather standard analysis technique of surface analysis. The catalyst's surface state is probably the most prominent factor that influences the catalytic performance. It is therefore no surprise that XPS has become an indispensable tool in studies of solid catalysts. It has been directly used to investigate issues such as the surface composition of the active catalyst and reaction and deactivation mechanisms.The objective of this book is to provide a comprehensive overview of the current status and future perspectives of X-ray photoelectron spectroscopy dedicated to catalytic applications, including thermal catalysis, electrocatalysis, and photo(electro)catalysis. The book contains 13 chapters, starting with the necessary introduction of the technique background, including basic phenomena and instrumentation aspects. The second part of the book focuses on the presentation of long-established applications of the technique, such as XPS studies of model catalysts. Finally, the book describes relatively recent developments of this method for cutting-edge surface characterization mainly using synchrotron X-ray radiation.
Download or read book Heterogeneous Catalysts written by Wey Yang Teoh and published by John Wiley & Sons. This book was released on 2021-02-23 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents state-of-the-art knowledge of heterogeneous catalysts including new applications in energy and environmental fields This book focuses on emerging techniques in heterogeneous catalysis, from new methodology for catalysts design and synthesis, surface studies and operando spectroscopies, ab initio techniques, to critical catalytic systems as relevant to energy and the environment. It provides the vision of addressing the foreseeable knowledge gap unfilled by classical knowledge in the field. Heterogeneous Catalysts: Advanced Design, Characterization and Applications begins with an overview on the evolution in catalysts synthesis and introduces readers to facets engineering on catalysts; electrochemical synthesis of nanostructured catalytic thin films; and bandgap engineering of semiconductor photocatalysts. Next, it examines how we are gaining a more precise understanding of catalytic events and materials under working conditions. It covers bridging pressure gap in surface catalytic studies; tomography in catalysts design; and resolving catalyst performance at nanoscale via fluorescence microscopy. Quantum approaches to predicting molecular reactions on catalytic surfaces follows that, along with chapters on Density Functional Theory in heterogeneous catalysis; first principles simulation of electrified interfaces in electrochemistry; and high-throughput computational design of novel catalytic materials. The book also discusses embracing the energy and environmental challenges of the 21st century through heterogeneous catalysis and much more. Presents recent developments in heterogeneous catalysis with emphasis on new fundamentals and emerging techniques Offers a comprehensive look at the important aspects of heterogeneous catalysis Provides an applications-oriented, bottoms-up approach to a high-interest subject that plays a vital role in industry and is widely applied in areas related to energy and environment Heterogeneous Catalysts: Advanced Design, Characterization and Applications is an important book for catalytic chemists, materials scientists, surface chemists, physical chemists, inorganic chemists, chemical engineers, and other professionals working in the chemical industry.
Download or read book In situ Characterization of Heterogeneous Catalysts written by José A. Rodriguez and published by John Wiley & Sons. This book was released on 2013-04-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helps researchers develop new catalysts for sustainable fueland chemical production Reviewing the latest developments in the field, this bookexplores the in-situ characterization of heterogeneous catalysts,enabling readers to take full advantage of the sophisticatedtechniques used to study heterogeneous catalysts and reactionmechanisms. In using these techniques, readers can learn to improvethe selectivity and the performance of catalysts and how to preparecatalysts as efficiently as possible, with minimum waste. In-situ Characterization of Heterogeneous Catalysts featurescontributions from leading experts in the field of catalysis. Itbegins with an introduction to the fundamentals and thencovers: Characterization of electronic and structural properties ofcatalysts using X-ray absorption fine structure spectroscopy Techniques for structural characterization based on X-raydiffraction, neutron scattering, and pair distribution functionanalysis Microscopy and morphological studies Techniques for studying the interaction of adsorbates withcatalyst surfaces, including infrared spectroscopy, Ramanspectroscopy, EPR, and moderate pressure XPS Integration of techniques that provide information on thestructural properties of catalysts with techniques that facilitatethe study of surface reactions Throughout the book, detailed examples illustrate how techniquesfor studying catalysts and reaction mechanisms can be applied tosolve a broad range of problems in heterogeneous catalysis.Detailed figures help readers better understand how and why thetechniques discussed in the book work. At the end of each chapter,an extensive set of references leads to the primary literature inthe field. By explaining step by step modern techniques for the in-situcharacterization of heterogeneous catalysts, this book enableschemical scientists and engineers to better understand catalystbehavior and design new catalysts for green, sustainable fuel andchemical production.
Download or read book Catalysis Looks to the Future written by National Research Council and published by National Academies Press. This book was released on 1992-02-01 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: The impact of catalysis on the nation's economy is evidenced by the fact that catalytic technologies generate U.S. sales in excess of $400 billion per year and a net positive balance of trade of $16 billion annually. This book outlines recent accomplishments in the science and technology of catalysis and summarizes important likely challenges and opportunities on the near horizon. It also presents recommendations for investment of financial and human resources by industry, academe, national laboratories, and relevant federal agencies if the nation is to maintain continuing leadership in this fieldâ€"one that is critical to the chemical and petroleum processing industries, essential for energy-efficient means for environmental protection, and vital for the production of a broad range of pharmaceuticals.
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Applied Surface Analysis written by Tery Lynn Barr and published by ASTM International. This book was released on 1980 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Postdoctoral Research Associateships written by and published by . This book was released on 1982 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In situ Spectroscopic Studies of Adsorption at the Electrode and Electrocatalysis written by Shi-Gang Sun and published by Elsevier. This book was released on 2011-08-11 with total page 559 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-Situ Spectroscopic Studies of Adsorption at the Electrode and Electrocatalysis is a new reference on in-situ spectroscopic techniques/applications, fundamentals of electrocatalysis at molecule level, and progresses within electrochemical surface science. Presenting both essential background knowledge at graduate level and original research within the fields of spectroscopy, electrochemistry, and surface science. Featuring 15 chapters by prominent worldwide scholars, based on their recent progress in different aspects of in-situ spectroscopy studies, this book will appeal to a wide audience of scientists. In summary this book is highly suitable for graduates learning basic concepts and advanced applications of in-situ spectroscopy, electrocatalysis and electrode adsorptions.* Written by the most active scientists in the fields of spectroscopy, electrochemistry and surface science* Essential background knowledge for graduate students* A modern reference of cutting-edge scientific research
Download or read book Spectroscopy in Heterogeneous Catalysis written by W Delgass and published by Elsevier. This book was released on 2012-12-02 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectroscopy in Heterogeneous Catalysis deals with the applications of spectroscopy in heterogeneous catalysis. The concepts and capabilities of a particular technique, experimental procedures, and examples of all proven or potentially important applications are discussed. The use of spectroscopic measurements in guiding empirical approaches to applied problems and to fundamental studies of the chemical identity of catalytic surfaces is also described. This book is comprised of eight chapters and begins with a discussion on the scope of spectroscopy in catalysis and applications of spectroscopy to zeolite catalysts. The following chapters focus on infrared spectroscopy, with emphasis on the theory and interpretation of infrared spectra; Raman spectroscopy and the theory of the Raman effect; diffuse reflectance and photoacoustic spectroscopies; and Mössbauer spectroscopy. Electron spin resonance spectroscopy and nuclear magnetic resonance spectroscopy are also considered. The final chapter is devoted to X-ray photoelectron spectroscopy (XPS) and its application to core electrons, along with the experimental equipment and procedures used. The applications of XPS to studies of surface behavior and catalyst composition and chemistry are outlined. This monograph will be a useful resource for physicists, researchers, and potential researchers in heterogeneous catalysis.
Download or read book Application of Ambient Pressure X ray Photoelectron Spectroscopy to Catalysis written by Franklin Tao and published by John Wiley & Sons. This book was released on 2023-09-29 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: APPLICATION OF AMBIENT PRESSURE X-RAY PHOTOELECTRON SPECTROSCOPY TO CATALYSIS Authoritative and detailed reference on ambient-pressure x-ray photoelectron spectroscopy for practitioners and researchers starting in the field Application of Ambient Pressure X-ray Photoelectron Spectroscopy to Catalysis introduces a relatively new analytical method and its applications to chemistry, energy, environmental, and materials sciences, particularly the field of heterogeneous catalysis, covering its background and historical development, its principles, the instrumentation required to use it, analysis of data collected with it, and the challenges it faces. The features of this method are described early in the text; the starting chapters provide a base for understanding how AP-XPS tracks crucial information in terms of the surface of a catalyst during catalysis. The second half of this book delves into the specific applications of AP-XPS to fundamental studies of different catalytic reactions. In later chapters, the focus is on how AP-XPS could provide key information toward understanding catalytic mechanisms. To aid in reader comprehension, the takeaways of each chapter are underlined. In Application of Ambient Pressure X-ray Photoelectron Spectroscopy to Catalysis, readers can expect to find detailed information on specific topics such as: Going from surface of model catalyst in UHV to surface of nanoparticle catalyst during catalysis Application of XPS from surface in UHV to surface in gas or liquid phase and fundamentals of X-ray spectroscopy Significance and challenges of studying surface of a catalyst in gaseous phase and instrumentation of ambient pressure X-ray photoelectron spectrometers Experimental methods of AP-XPS studies and difference in data analysis between AP-XPS and high vacuum XPS Ambient Pressure X-Ray Photoelectron Spectroscopy is an ideal resource for entry level researchers and students involved in x-ray photoelectron spectroscopy. Additionally, the text will appeal to scientists in more senior roles in academic and government laboratory institutions in the fields of chemistry, chemical engineering, energy science, and materials science.
Download or read book Zeolites in Catalysis written by Jiří Čejka and published by Royal Society of Chemistry. This book was released on 2017-06-07 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accessible references for researchers and industrialists in this exciting field, covering both developments and applications of catalysis.
Download or read book Characterization of Solid Materials and Heterogeneous Catalysts written by Michel Che and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.
Download or read book Electron Crystallography written by Thomas E. Weirich and published by Springer Science & Business Media. This book was released on with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electron Spectroscopy written by C. R. Brundle and published by . This book was released on 1981 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Molecular Spectroscopy of Oxide Catalyst Surfaces written by Anatoli Davydov and published by John Wiley & Sons. This book was released on 2003-06-27 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: As in the study of transition metal complexes in solution, molecular spectroscopic methods - principally the infrared, ultraviolet/visible and electron spin resonance spectroscopies - have played key roles in establishing the concepts of coordination chemistry occurring at the surfaces of solids. This book describes the development of the principals of coordination chemistry of oxide surfaces using analyses of data obtained by these methods. The nature, properties, concentration of the surface adsorption centers and their influence on the character of interaction with different molecules are investigated. The book commences with an account of the basic theoretical principles and experimental techniques of the various spectroscopy methods, with special attention devoted to in situ measurements where the oxide or catalyst sample is in contact with the adsorbate or the reactant. A detailed account is presented of the methods for characterizing the oxidation state and degree of coordination of surface cations and oxygen anions by the adsorption of probe molecules. The complexation of many inorganic, organometallic and organic molecules with different oxide systems is critically examined, and a classification of formed surface compounds, based on the interaction with definite type of adsorption centers, is given. Possible mechanisms of numerous catalytic reactions, including the transformation of organic molecules over acidic catalysts via the carboionic mechanism, are discussed using the spectroscopic identifications of reaction intermediates. A comprehensive analysis of the literature on the interpretation of the spectra of surface compounds on oxides is presented. This highly illustrated and extensively referenced volume is intended for specialists working in the fields of surface physical chemistry, surface and materials sciences, and adsorption phenomena and is essential reading for those involved in the heterogeneous catalysis by transition metal-oxides.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ammonia Synthesis Catalysts Innovation And Practice written by Huazhang Liu and published by World Scientific. This book was released on 2013-03-21 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a review of worldwide developments in ammonia synthesis catalysts over the last 30 years. It focuses on the new generation of Fe1-xO based catalysts and ruthenium catalysts — both are major breakthroughs for fused iron catalysts. The basic theory for ammonia synthesis is systematically explained, covering topics such as the chemical components, crystal structure, preparation, reduction, performance evaluation, characterization of the catalysts, the mechanism and kinetics of ammonia synthesis reaction. Both theory and practice are combined in this presentation, with emphasis on the research methods, application and exploitation of catalysts.The comprehensive volume includes an assessment of the economic and engineering aspects of ammonia plants based on the performance of catalysts. Recent developments in photo-catalysis, electro-catalysis, biocatalysis and new uses of ammonia are also introduced in this book.The author, Professor Huazhang Liu, has been engaged in research and practice for more than 50 years in this field and was the inventor of the first Fe1-xO based catalysts in the world. He has done a lot of research on Fe3O4 based- and ruthenium based-catalysts, and has published more than 300 papers and obtained 21 patents during his career.
