Download or read book Principles of Analytical Electron Microscopy written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication in 1979 of Introduction to Analytical Electron Microscopy (ed. J. J. Hren, J. I. Goldstein, and D. C. Joy; Plenum Press), analytical electron microscopy has continued to evolve and mature both as a topic for fundamental scientific investigation and as a tool for inorganic and organic materials characterization. Significant strides have been made in our understanding of image formation, electron diffraction, and beam/specimen interactions, both in terms of the "physics of the processes" and their practical implementation in modern instruments. It is the intent of the editors and authors of the current text, Principles of Analytical Electron Microscopy, to bring together, in one concise and readily accessible volume, these recent advances in the subject. The text begins with a thorough discussion of fundamentals to lay a foundation for today's state-of-the-art microscopy. All currently important areas in analytical electron microscopy-including electron optics, electron beam/specimen interactions, image formation, x-ray microanalysis, energy-loss spectroscopy, electron diffraction and specimen effects-have been given thorough attention. To increase the utility of the volume to a broader cross section of the scientific community, the book's approach is, in general, more descriptive than mathematical. In some areas, however, mathematical concepts are dealt with in depth, increasing the appeal to those seeking a more rigorous treatment of the subject.
Download or read book Advanced Scanning Electron Microscopy and X Ray Microanalysis written by Patrick Echlin and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its origins in the intensive short courses on scanning elec tron microscopy and x-ray microanalysis which have been taught annually at Lehigh University since 1972. In order to provide a textbook containing the materials presented in the original course, the lecturers collaborated to write the book Practical Scanning Electron Microscopy (PSEM), which was published by Plenum Press in 1975. The course con tinued to evolve and expand in the ensuing years, until the volume of material to be covered necessitated the development of separate intro ductory and advanced courses. In 1981 the lecturers undertook the project of rewriting the original textbook, producing the volume Scan ning Electron Microscopy and X-Ray Microanalysis (SEMXM). This vol ume contained substantial expansions of the treatment of such basic material as electron optics, image formation, energy-dispersive x-ray spectrometry, and qualitative and quantitative analysis. At the same time, a number of chapters, which had been included in the PSEM vol ume, including those on magnetic contrast and electron channeling con trast, had to be dropped for reasons of space. Moreover, these topics had naturally evolved into the basis of the advanced course. In addition, the evolution of the SEM and microanalysis fields had resulted in the devel opment of new topics, such as digital image processing, which by their nature became topics in the advanced course.
Download or read book Practical Scanning Electron Microscopy written by Joseph Goldstein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the spring of 1963, a well-known research institute made a market survey to assess how many scanning electron microscopes might be sold in the United States. They predicted that three to five might be sold in the first year a commercial SEM was available, and that ten instruments would saturate the marketplace. In 1964, the Cambridge Instruments Stereoscan was introduced into the United States and, in the following decade, over 1200 scanning electron microscopes were sold in the U. S. alone, representing an investment conservatively estimated at $50,000- $100,000 each. Why were the market surveyers wrongil Perhaps because they asked the wrong persons, such as electron microscopists who were using the highly developed transmission electron microscopes of the day, with resolutions from 5-10 A. These scientists could see little application for a microscope that was useful for looking at surfaces with a resolution of only (then) about 200 A. Since that time, many scientists have learned to appreciate that information content in an image may be of more importance than resolution per se. The SEM, with its large depth of field and easily that often require little or no sample prepara interpreted images of samples tion for viewing, is capable of providing significant information about rough samples at magnifications ranging from 50 X to 100,000 X. This range overlaps considerably with the light microscope at the low end, and with the electron microscope at the high end.
Download or read book The Principles and Practice of Electron Microscopy written by Ian M. Watt and published by Cambridge University Press. This book was released on 1997-01-30 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book was widely praised as an excellent introduction to electron microscopy for materials scientists, physicists, earth and biological scientists. This completely revised new edition contains expanded coverage of existing topics and much new material. The author presents the subject of electron microscopy in a readable way, open both to those inexperienced in the technique, and also to practising electron microscopists. The coverage has been brought completely up to date, whilst retaining descriptions of early classic techniques. Currently live topics such as computer control of microscopes, energy-filtered imaging, cryo- and environmental microscopy, digital imaging, and high resolution scanning and transmission microscopy are all described. The highly praised case studies of the first edition have been expanded to include some interesting new examples. This indispensable guide to electron microscopy, written by an author with thirty years practical experience, will be invaluable to new and experienced electron microscopists in any area of science and technology.
Download or read book Principles of Electron Optics Volume 1 written by Peter W. Hawkes and published by Elsevier. This book was released on 2017-10-29 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume one of Principles of Electron Optics: Basic Geometrical Optics, Second Edition, explores the geometrical optics needed to analyze an extremely wide range of instruments: cathode-ray tubes; the family of electron microscopes, including the fixed-beam and scanning transmission instruments, the scanning electron microscope and the emission microscope; electron spectrometers and mass spectrograph; image converters; electron interferometers and diffraction devices; electron welding machines; and electron-beam lithography devices. The book provides a self-contained, detailed, modern account of electron optics for anyone involved with particle beams of modest current density in the energy range up to a few mega-electronvolts. You will find all the basic equations with their derivations, recent ideas concerning aberration studies, extensive discussion of the numerical methods needed to calculate the properties of specific systems and guidance to the literature of all the topics covered. A continuation of these topics can be found in volume two, Principles of Electron Optics: Applied Geometrical Optics. The book is intended for postgraduate students and teachers in physics and electron optics, as well as researchers and scientists in academia and industry working in the field of electron optics, electron and ion microscopy and nanolithography. - Offers a fully revised and expanded new edition based on the latest research developments in electron optics - Written by the top experts in the field - Covers every significant advance in electron optics since the subject originated - Contains exceptionally complete and carefully selected references and notes - Serves both as a reference and text
Download or read book The Growth of Electron Microscopy written by and published by Academic Press. This book was released on 1996-08-05 with total page 919 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a complement to The Beginnings of Electron Microscopy, Advances in Imaging and Electron Physics is pleased to present Volume 96, The Growth of Electron Microscopy. This comprehensive collection of articles surveys the accomplishments of various national groups that comprise the International Federation of Societies of Electron Microscopy (IFSEM).
Download or read book Electron Microprobe Analysis and Scanning Electron Microscopy in Geology written by S. J. B. Reed and published by Cambridge University Press. This book was released on 2005-08-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 2005, this book covers the closely related techniques of electron microprobe analysis (EMPA) and scanning electron microscopy (SEM) specifically from a geological viewpoint. Topics discussed include: principles of electron-target interactions, electron beam instrumentation, X-ray spectrometry, general principles of SEM image formation, production of X-ray 'maps' showing elemental distributions, procedures for qualitative and quantitative X-ray analysis (both energy-dispersive and wavelength-dispersive), the use of both 'true' electron microprobes and SEMs fitted with X-ray spectrometers, and practical matters such as sample preparation and treatment of results. Throughout, there is an emphasis on geological aspects not mentioned in similar books aimed at a more general readership. The book avoids unnecessary technical detail in order to be easily accessible, and forms a comprehensive text on EMPA and SEM for geological postgraduate and postdoctoral researchers, as well as those working in industrial laboratories.
Download or read book Electron Probe Quantitation written by K.F.J. Heinrich and published by Springer Science & Business Media. This book was released on 1991-06-30 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1968, the National Bureau of Standards (NBS) published Special Publication 298 "Quantitative Electron Probe Microanalysis," which contained proceedings of a seminar held on the subject at NBS in the summer of 1967. This publication received wide interest that continued through the years far beyond expectations. The present volume, also the result of a gathering of international experts, in 1988, at NBS (now the National Institute of Standards and Technology, NIST), is intended to fulfill the same purpose. After years of substantial agreement on the procedures of analysis and data evaluation, several sharply differentiated approaches have developed. These are described in this publi cation with all the details required for practical application. Neither the editors nor NIST wish to endorse any single approach. Rather, we hope that their exposition will stimulate the dialogue which is a prerequisite for technical progress. Additionally, it is expected that those active in research in electron probe microanalysis will appreciate more clearly the areas in which further investigations are warranted.
Download or read book Electron Energy Loss Spectroscopy in the Electron Microscope written by R.F. Egerton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron energy-loss spectroscopy (EELS or ELS) has been used to investi gate the physical properties of solids for over 40 years in a handful of laboratories distributed around the world. More recently, electron micro scopists have become interested in EELS as a method of chemical analysis with the potential for achieving very high sensitivity and spatial resolution, and there is a growing awareness of the fact that the loss spectrum can provide structural information from a thin specimen. In comparison with energy-dispersive x-ray spectroscopy, for example, EELS is a fairly demand ing technique, requiring for its full exploitation a knowledge of atomic and solid-state physics, electron optics, and electronics. In writing this book, I have tried to gather together relevant information from these various fields. Chapter 1 begins at an elementary level; readers with some experience in EELS will be familiar with the content of the first two sections. Chapter 2 deals with instrumentation and experimental technique, and should con tain material of interest to researchers who want to get the best performance out of commercial equipment as well as those who contemplate building their own spectrometer or electron-detection system. Chapter 3 outlines the theory used to interpret spectral features, while Chapter 4 gives procedures for numerical processing of the energy-loss spectrum. Chapter 5 contains examples of practical applications of EELS and a discussion of radiation damage, spatial resolution, and detection limits.
Download or read book Electron Microscopy and Analysis 1981 written by Michael John Goringe and published by Institute of Physics Publishing (GB). This book was released on 1982 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Metallurgy written by R.W. Cahn and published by Elsevier. This book was released on 1996-02-09 with total page 2889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the fourth edition of a work which first appeared in 1965. The first edition had approximately one thousand pages in a single volume. This latest volume has almost three thousand pages in 3 volumes which is a fair measure of the pace at which the discipline of physical metallurgy has grown in the intervening 30 years.Almost all the topics previously treated are still in evidence in this version which is approximately 50% bigger than the previous edition. All the chapters have been either totally rewritten by new authors or thoroughly revised and expanded, either by the third-edition authors alone or jointly with new co-authors. Three chapters on new topics have been added, dealing with dry corrosion, oxidation and protection of metal surfaces; the dislocation theory of the mechanical behavior of intermetallic compounds; and (most novel) a chapter on polymer science for metallurgists, which analyses the conceptual mismatch between metallurgists' and polymer scientists' way of looking at materials. Special care has been taken throughout all chapters to incorporate the latest experimental research results and theoretical insights. Several thousand citations to the research and review literature are included in this edition. There is a very detailed subject index, as well as a comprehensive author index.The original version of this book has long been regarded as the standard text in physical metallurgy and this thoroughly rewritten and updated version will retain this status.
Download or read book Advances in Imaging and Electron Physics written by and published by Academic Press. This book was released on 2015-06-09 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Imaging and Electron Physics merges two long-running serials—Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. The series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains. - Contributions from leading authorities - Informs and updates on all the latest developments in the field
Download or read book High Resolution Transmission Electron Microscopy written by Peter Buseck and published by Oxford University Press. This book was released on 1989-02-02 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to the fundamental concepts, techniques, and methods used for electron microscopy at high resolution in space, energy, and even in time. It delineates the theory of elastic scattering, which is most useful for spectroscopic and chemical analyses. There are also discussions of the theory and practice of image calculations, and applications of HRTEM to the study of solid surfaces, highly disordered materials, solid state chemistry, mineralogy, semiconductors and metals. Contributors include J. Cowley, J. Spence, P. Buseck, P. Self, and M.A. O'Keefe. Compiled by experts in the fields of geology, physics and chemistry, this comprehensive text will be the standard reference for years to come.
Download or read book Publications written by United States. National Bureau of Standards and published by . This book was released on 1982 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Problem Solving with Microbeam Analysis written by K. Kiss and published by Elsevier. This book was released on 2012-12-02 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the reader with a working knowledge sufficient to select microbeam techniques for the efficient, cost-effective solution of complex problems arising in today's high-tech industries. Primarily written for the industrial analyst whose field of expertise is other than microbeam analysis, it will also be of help to engineers, plant chemists and industrial research scientists who often seek the aid of the microbeam analyst in their problem solving. Research and plant managers as well as administrators may also find this book helpful since they may be called upon to select and/or approve high-priced microbeam instruments.The book is organized into two parts. Part I gives a brief description of the various techniques and critically compares their capabilities and limitations. Part II consists of selected applications which show how the various techniques or their combinations are applied to characterize materials and to guide research in a wide variety of fields. The examples and case histories will undoubtedly aid the reader in problem solving, quality assurance and research-related tasks. Newcomers to the field will find enough information in the book to enable them to begin practical work and to apply the techniques.
Download or read book Publications of the National Institute of Standards and Technology Catalog written by National Institute of Standards and Technology (U.S.) and published by . This book was released on 1982 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Electron Microscopy Technique written by and published by . This book was released on 1991 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
