Download or read book Radiation Processing of Polymer Materials and Its Industrial Applications written by Keizo Makuuchi and published by John Wiley & Sons. This book was released on 2012-02-07 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the effect of radiation on polymers and the versatility of its industrial applications. By helping readers understand and solve problems associated with radiation processing of polymers, it serves as an important reference and fills a gap in the literature. Radiation processing can significantly improve important properties of polymers, however, there are still misconceptions about processing polymers by using ionizing radiation. This book explains the radiation processing of polymeric materials used in many industrial products including cars, airplanes, computers, and TVs. It even addresses emerging "green" issues like biomaterials and hydrogels.

Download or read book Ultraviolet and electron beam UV EB cured coatings inks and adhesives written by and published by DIANE Publishing. This book was released on with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Radiation Technology for Polymers written by Jiri George Drobny and published by CRC Press. This book was released on 2002-11-25 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The industrial use of ultraviolet (UV) and electron beam (EB) radiation is growing rapidly and now penetrates an ever-widening range of applications, including electronics, printing, packaging. Resources and references for seasoned professionals abound, but few effectively introduce the field to newcomers or provide fast access to specifics on UV a

Download or read book Reviews Of Accelerator Science And Technology Volume 4 Accelerator Applications In Industry And The Environment written by Alexander Wu Chao and published by World Scientific. This book was released on 2012-02-20 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their debut in the late 1920s, particle accelerators have evolved into a backbone for the development of science and technology in modern society. Of about 30,000 accelerators at work in the world today, a majority is for applications in industry (about 20,000 systems worldwide).There are two major categories of industrial applications: materials processing and treatment, and materials analysis. Materials processing and treatment includes ion implantation (semi-conductor materials, metals, ceramics, etc.) and electron beam irradiation (sterilization of medical devices, food pasteurization, treatment of carcasses and tires, cross-linking of polymers, cutting and welding, curing of composites, etc.). Materials analysis covers ion beam analysis (IBA), non-destructive detection using photons and neutrons, as well as accelerator mass spectrometry (AMS). All the products that are processed, treated and inspected using beams from particle accelerators are estimated to have a collective value of US$500 billion per annum worldwide. Accelerators are also applied for environment protection, such as purifying drinking water, treating waste water, disinfecting sewage sludge and removing pollutants from flue gases.Industrial accelerators continue to evolve, in terms of new applications, qualities and capabilities, and reduction of their costs. Breakthroughs are encountered whenever a new product is made, or an existing product becomes more cost effective. Their impact on our society continues to grow with the potential to address key issues in economics or the society of today.This volume contains fourteen articles, all authored by renowned scientists in their respective fields.

Download or read book Reviews of Accelerator Science and Technology written by Alex Chao and published by World Scientific. This book was released on 2012-02-20 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends for electron beam accelerator applications in industry / Sueo Machi -- Ion implantation for semiconductor doping and materials modification / Lawrence A. Larson, Justin M. Williams and Michael I. Current -- Ion beam analysis: a century of exploiting the electronic and nuclear structure of the atom for materials characterisation / Chris Jeynes, Roger P. Webb and Annika Lohstroh -- Neutrons and photons in nondestructive detection / J.F. Harmon, D.P. Wells and A.W. Hunt -- Review of cyclotrons for the production of radioactive isotopes for medical and industrial applications / Paul Schmor -- Development of accelerator mass spectrometry and its applications / Jiaer Chen [und weitere] -- Electron accelerators for environmental protection / Andrzej G. Chmielewski -- Studying radiation damage in structural materials by using ion accelerators / Peter Hosemann -- Direct current accelerators for industrial applications / Ragnar Hellborg and Harry J. Whitlow -- Radio-frequency electron accelerators for industrial applications / Marshall R. Cleland -- Accelerators for neutron generation and their applications / Guenter Mank, Guenter Bauer and Francoise Mulhauser -- Prospects for accelerator technology / Alan Todd -- CERN: from birth to success / Herwig Schopper -- Simon van der Meer (1925-2011): a modest genius of accelerator science / Vinod C. Chohan

Download or read book SAMPE Symposium and Exhibition written by Linas Repecka and published by Taylor & Francis. This book was released on 2001 with total page 2637 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Rubber Products Manufacturing Technology written by Anil K. Bhowmick and published by Routledge. This book was released on 2018-10-03 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides authoritative coverage of compounding, mixing, calendering, extrusion, vulcanization, rubber bonding, computer-aided design and manufacturing, automation and control using microprocessors, just-in-time technology and rubber plant waste disposal.

Download or read book Nonpolluting Coatings and Coating Processes written by J. Gardon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ecological requirements are forcing a change in tech nology of industrially applied coatings. At present sol vent-borne coatings dominate this field but in the next few years rapidly increasing use will be made of aqueous coatings, electrocoating, solvent-free liquid coatings which can be cured by U. V.-light or electronbeam, and powder coatings. This monograph describes some recent developments in these new "non-polluting" coating technologies. It is impossible to predict how big a share each of these novel coatings will take from the conventional in dustrial finishes market which at present represents an annual volume of about one billion dollars. In all likeli hood each will find its own specialized use. We hope that this monograph will help the reader to form a perspective of the various novel coatings, their method of application, their advantages and their limitations. J. L. Gardon Joseph W. Prane Rahway, N. J.,and Elkins Park, Pa. October 15, 1972 v CONTENTS Status of Air Pollution Control Regulations........... 1 Francis Scofield Physical Characterization of Water Dispersed and Soluble Acrylic Polymers........................... 5 William H. Brendley, Jr. and Thomas H. Haag Methylated Urea Formaldehyde Cross-Linking Agents in Aqueous Emulsions............................... 25 Leonard J. Calbo Polymer Parameters Affecting Aqueous Topcoat Systems. • . . . . . . . . . • . . . . . . • . . . . . . . . . • . • . . . 35 . • . . . . . . . .

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Coatings from A Z written by Paolo Nanetti and published by European Coatings. This book was released on 2016-07-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Need to look up special terms and keywords in the field of coatings technology? Now in its 2nd edition, " Coatings from A– Z" is your clear, compact, and easy-to-use technical lexicon, providing a comprehensive selection of coatings-related keywords. Enriched with many practical examples, it serves as an efficient aidto both newcomers to the industry and readers with a technical background.

Download or read book Pressure Sensitive Adhesives and Applications written by Istvan Benedek and published by CRC Press. This book was released on 2004-02-03 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure-Sensitive Adhesives and Applications, Second Edition explains how pressure-sensitive adhesives (PSAs) work, why they are used, and the technology used to manufacture them. This second edition features the latest developments in the field. Dr. Benedek discusses the factors that affect the rheology and special flow characteristics responsible for the adhesivity of liquid and solid PSAs. His book explores the viscoelastic behavior of PSAs, and compares them to plastics, rubbers, and polymers properties and examines the parameters that influence the conversion process of PSAs from the coating of carrier materials to the properties of the final laminate. The author covers adhesion/cohesion balance, time-temperature dependence of pressure sensitivity, chemical composition, coating properties, and coating processes affect the adhesive properties of PSA and their end products and how application-specific performance indices are used to determine the formulation and manufacture of raw materials. In addition, up-to-date coating machines, converting technology, and environmental considerations in the manufacture of PSA final products as well as industry-specific methods of testing for quality assurance and control are discussed. Pressure-Sensitive Adhesives and Applications, Second Edition combines the theoretical basis of pressure sensitivity with the practical aspects of manufacturing, testing, and use of PSAs. Readers are offered an exhaustive as well as comparative look at the engineering of plastics, adhesives, and pressure-sensitives, resulting in an indispensable, up-to-date reference for adhesive and polymer chemists and technologists.

Download or read book Roll to Roll Manufacturing written by Jehuda Greener and published by John Wiley & Sons. This book was released on 2018-02-27 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: A single-volume resource featuring state-of-the art reviews of key elements of the roll-to-roll manufacturing processing methodology Roll-to-roll (R2R) manufacturing is an important manufacturing technology platform used extensively for mass-producing a host of film-type products in several traditional industries such as printing, silver-halide photography, and paper. Over the last two decades, some of the methodologies and know-how of R2R manufacturing have been extended and adapted in many new technology areas, including microelectronics, display, photovoltaics, and microfluidics. This comprehensive book presents the state-of-the-art unit operations of the R2R manufacturing technology, providing a practical resource for scientists, engineers, and practitioners not familiar with the fundamentals of R2R technology. Roll-to-Roll Manufacturing: Process Elements and Recent Advances reviews new developments in areas such as flexible glass, display, and photovoltaics and covers a number of process innovations implemented recently to extend and improve the capabilities of traditional R2R lines. It covers such topics as: coating and solidification processes, in-line vacuum deposition, drying, web handling and winding, polymer film substrates, novel hybrid composite films, flexible solar cells and more. Additionally, this book: Examines key elements (unit operations) of the R2R technology, and discusses how these elements are utilized and integrated to achieve desired process efficiencies in a host of applications. Illustrates several established and novel application areas where R2R processing is utilized in current or future products. Discusses process design methodology and key advantages of R2R manufacturing technology over batch or sheet-to-sheet operations. Roll-to-Roll Manufacturing: Process Elements and Recent Advances is an ideal book for undergraduate and graduate students in various science and engineering disciplines, as well as for scientists, engineers, and technical and business leaders associated in any way with the development, commercialization, and manufacture of a variety of film products.

Download or read book Inkjet Printing in Industry written by Werner Zapka and published by John Wiley & Sons. This book was released on 2022-08-22 with total page 1718 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an indispensable overview of all essential aspects of industrial-scale inkjet printing. Inkjet printing, as a scalable deposition technique, has grown in popularity due to its being additive, digital, and contact-free. Given these advantages, the technology can now be used in stable and mature industrial-scale applications. As the mechanisms for inkjet printing have improved, so too have the versatility and applicability of this machinery within industry. The handbook's coverage includes inks, printhead technology, substrates, metrology, software, as well as machine integration and pre- and post-processing approaches. This information is complemented by an overview of printing strategies and application development and covers technological advances in packaging, security printing, printed electronics, robotics, 3D printing, and bioprinting. Important topics like standardisation, regulatory requirements, ecological aspects, and patents. Readers will find: The most comprehensive work on the topic with over 75 chapters and more than 1,500 pages relating to inkjet printing technology The inkjet-printing expertise of corporate development engineers and academic researchers in one manual A hands-on approach utilizing case studies, success stories, and practical hints that allow the reader direct, first-hand experience with the power of inkjet printing technology. The ideal resource for material scientists, engineering scientists in industry, electronic engineers, and surface and solid-state chemists,Inkjet Printing in Industry is an all-in-one tool for modern professionals and researchers alike.

Download or read book Certain High Intensity Retroreflective Sheeting Inv 337 TA 268 written by and published by DIANE Publishing. This book was released on with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vacuum Deposition onto Webs Films and Foils written by Charles Bishop and published by William Andrew. This book was released on 2011-06-21 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roll-to-roll vacuum deposition is the technology that applies an even coating to a flexible material that can be held on a roll and provides a much faster and cheaper method of bulk coating than deposition onto single pieces or non-flexible surfaces, such as glass. This technology has been used in industrial-scale applications for some time, including a wide range of metalized packaging (e.g. snack packets). Its potential as a high-speed, scalable process has seen an increasing range of new products emerging that employ this cost-effective technology: - solar energy products are moving from rigid panels onto flexible substrates, which are cheaper and more versatile - in a similar way, electronic circuit 'boards' can be produced on a flexible polymer, creating a new range of 'flexible electronics' products - flexible displays are another area of new technology in vacuum coating, with flexible display panels and light sources emerging Charles Bishop has written this book to meet the need he identified, as a trainer and consultant to the vacuum coatings industry, for a non-mathematical guide to the technologies, equipment, processes and applications of vacuum deposition. His book is aimed at a wide audience of engineers, technicians and production management. It also provides a guide to the subject for sectors in which vacuum deposition is a novel technology, such as solar energy and flexible electronics. - Bishop's non-mathematical explanation of vacuum deposition technologies will empower a wide range of technicians, production managers and engineers in related disciplines to improve performance and maximize productivity from vacuum coating systems - Provides the knowledge and understanding needed to specify systems more effectively and enhance the dialogue between non-specialists and suppliers / engineers - Provides those in the rapidly expanding fields of solar energy, display panels and flexible electronics with the know-how to unlock the potential of vacuum coating to transform their processes and products

Download or read book Radiation Curing written by R. S. Davidson and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a very readable review on the exciting, advancing technology of radiation curing. The principles upon which the technology is based, the equipment that is used and the materials which make up a radiation curable formulation are described. The applications of radiation curing are set to expand. Current applications for radiation curing are all discussed in this review, with principle material types outlined. The review is well referenced to facilitate further reading. It is accompanied by around 400 abstracts from the Rapra Polymer Library database, most of which are cited in the d104.

Download or read book Radiation Curing in Polymer Science and Technology written by Jean-Pierre Fouassier and published by Springer Science & Business Media. This book was released on 1993-07-31 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume three deals specifically with the role of monomers and resins in radiation curing. The nature of the backbone of ologomers leads to the ultimate physical or chemical properties of the UV-cured material. This chapter also covers aspects of the chemistry of these compounds in relation to their end uses.