Download or read book Electromagnetic Interference and Compatibility written by Paolo Stefano Crovetti and published by MDPI. This book was released on 2021-08-31 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent progress in the fields of Electrical and Electronic Engineering has created new application scenarios and new Electromagnetic Compatibility (EMC) challenges, along with novel tools and methodologies to address them. This volume, which collects the contributions published in the “Electromagnetic Interference and Compatibility” Special Issue of MDPI Electronics, provides a vivid picture of current research trends and new developments in the rapidly evolving, broad area of EMC, including contributions on EMC issues in digital communications, power electronics, and analog integrated circuits and sensors, along with signal and power integrity and electromagnetic interference (EMI) suppression properties of materials.

Download or read book Electromagnetic Compatibility in Power Systems written by Francesco Lattarulo and published by Elsevier. This book was released on 2011-07-28 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: A large amount of natural or artificially produced physical phenomena are exploited for practical applications, even though several of them give rise to unpleasant consequences. These ultimately manifest themselves under form of malfunction or definitive failure of components and systems, or environmental hazard. So far, manifold categories of inadvertent or deliberate sources have been discovered to simultaneously produce useful effects in some ways but adverse ones in others. In particular, responsible for the growing interest in the last decades for Electromagnetic Compatibility (EMC) has been the progressive miniaturisation and sensitivity of electronic components and circuits, often operating in close proximity to relatively powerful sources of electromagnetic interference. Potential authors of books on the subject-matter are fully aware of the fact that planning production of manageable handbooks capable to treat all the EMC case studies of practical and long-lasting interest could result in a questionable and difficult undertaking. Therefore, in addition to textbooks providing a thorough background on basic aspects, thus being well-tailored for students and those which want to get in contact with this discipline, the most can be made to jointly sustain a helpful and practicable publishing activity is to supply specialised monographs or miscellanies of selected topics. Such resources are preferentially addressed to post-graduate students, researchers and designers, often employed in the forefront of research or engaged for remodelling design paradigms. Hence, the prerequisite for such a class of publications should consist in arousing critical sense and promoting new ideas. This is the object of Electromagnetic Compatibility in Power Systems, which tries to rather discuss special subjects, or throw out suggestions for reformulating conventional approaches, than to appear as a reference text. A common motivation encouraged the contributors to bringing together a number of accounts of the research that they have undertaken over the late years: willing to fill the important need of covering EMC topics rather proper to transmission and distribution of electric power than, more usually, to Electronics and Telecommunication Systems. - EMC topics for Power Systems, at last! - Investigating EMC features of distributed and/or complex systems - A broad body of knowledge for specific applications - A stimulating support for those which are engaged in the forefront of research and design - An example of how breaking ideas should be encouraged and proudly applied - A fruitful critique to overcomplicated and unpractical models - A comprehensive resource to estimate the important role of EMC at lower frequencies

Download or read book Electromagnetic Compatibility Engineering written by Henry W. Ott and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 883 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for Noise Reduction Techniques IN electronic systems "Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others." —EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications to the design of analog and digital circuits in computer, home entertainment, medical, telecom, industrial process control, and automotive equipment, as well as military and aerospace systems. While maintaining and updating the core information—such as cabling, grounding, filtering, shielding, digital circuit grounding and layout, and ESD—that made the previous book such a wide success, this new book includes additional coverage of: Equipment/systems grounding Switching power supplies and variable-speed motor drives Digital circuit power distribution and decoupling PCB layout and stack-up Mixed-signal PCB layout RF and transient immunity Power line disturbances Precompliance EMC measurements New appendices on dipole antennae, the theory of partial inductance, and the ten most common EMC problems The concepts presented are applicable to analog and digital circuits operating from below audio frequencies to those in the GHz range. Throughout the book, an emphasis is placed on cost-effective EMC designs, with the amount and complexity of mathematics kept to the strictest minimum. Complemented with over 250 problems with answers, Electromagnetic Compatibility Engineering equips readers with the knowledge needed to design electronic equipment that is compatible with the electromagnetic environment and compliant with national and international EMC regulations. It is an essential resource for practicing engineers who face EMC and regulatory compliance issues and an ideal textbook for EE courses at the advanced undergraduate and graduate levels.

Download or read book Engineering Electromagnetic Compatibility written by V. Prasad Kodali and published by Wiley-IEEE Press. This book was released on 2001-01-19 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Engineering Engineering Electromagnetic Compatibility Principles, Measurements, Technologies, and Computer Models Second Edition This practical, enhanced second edition will teach you to avoid costly post-design electromagnetic compatibility (EMC) fixes. Once again, V. Prasad Kodali provides a comprehensive introduction to EMC and presents current technical information on sources of electromagnetic interference (EMI), EMC/EMI measurements, technologies to control EMI, computer simulation and design, and international EMC standards. Features added to this second edition include: * Two new chapters covering EMC computer modeling and simulation and signal integrity * Expanded assignments at the close of each chapter * Illustrative examples that enhance comprehension * Updated information in Selected Bibliography and EMC Standards chapters * A new appendix that lists websites relevant to EMC/EMI Engineering Electromagnetic Compatibility, Second Edition is presented in a concise, user-friendly format that combines a rigorous solutions-based, mathematical treatment of the underlying theories of EMC with the most recent practical applications. It is ideally suited as a desk reference for practicing engineers and as a textbook for students who need to understand the form and function of EMC and its relevance to a variety of systems.

Download or read book Handbook of Electromagnetic Compatibility written by Reinaldo Perez and published by Academic Press. This book was released on 2013-10-22 with total page 1119 pages. Available in PDF, EPUB and Kindle. Book excerpt: This"know-how"book gives readers a concise understanding of the fundamentals of EMC, from basic mathematical and physical concepts through present, computer-age methods used in analysis, design, and tests. With contributions from leading experts in their fields, the text provides a comprehensive overview. Fortified with information on how to solve potential electromagnetic interference (EMI) problems that may arise in electronic design, practitioners will be betterable to grasp the latest techniques, trends, and applications of this increasingly important engineering discipline. Handbook of Electromagnetic Compatibility contains extensive treatment of EMC applications to radio and wireless communications, fiber optics communications, and plasma effects. Coverage of EMC-related issues includes lightning, electromagnetic pulse, biological effects, and electrostatic discharge. Practical examples are used to illustrate the material, and all information is presented in an accessible and organized format. The text is intended primarily for those practicing engineers who need agood foundation in EMC, but it will also interest faculty and students, since a good portion of the material covered can find use in the classroom or as a springboard for further research. - The chapters are written by experts in the field - Details the fundamental principles, then moves to more advanced topics - Covers computational electromagnetics applied to EMC problems - Presents an extensive treatment of EMC applications to: Radio and wireless communications, Fiber optic communications, Plasma effects, Wired circuits, Microchips, Includes practical examples, Fiber optic, Communications, Plasma effects, Wired circuits, Microchips, Includes practical examples

Download or read book Electromagnetic Compatibility written by David A. Weston and published by CRC Press. This book was released on 2016-11-03 with total page 1182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a text useful for practicing nonspecialist engineers and those new to EMC Contains worked examples and applications of all equations Provides computer code and contains programs available for readers Covers certification EMC measurement techniques Includes a full chapter on system level EMC/EMI

Download or read book Advanced Materials and Design for Electromagnetic Interference Shielding written by Xingcun Colin Tong and published by CRC Press. This book was released on 2016-04-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: With electromagnetic compliance (EMC) now a major factor in the design of all electronic products, it is crucial to understand how electromagnetic interference (EMI) shielding products are used in various industries. Focusing on the practicalities of this area, Advanced Materials and Design for Electromagnetic Interference Shielding comprehensively

Download or read book Electromagnetic Interference and Electromagnetic Compatibility written by L. Ashok Kumar and published by CRC Press. This book was released on 2023-10-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic compatibility is concerned with the generation, transmission, and reception of electromagnetic energy. The book discusses about the basic principles of electromagnetic interference (EMI) and electromagnetic compatibility (EMC) including causes, events, and mitigation of issues. The design procedures for EMI filter, the types of filters, and filter implementation methods are explained. The simulation of printed circuit board designs using different software and a step-by-step method is discussed in detail. This book addresses the gap between theory and practice using case studies with design, experiments, and supporting analysis. Features: Discusses about the basic principles of EMI/EMC including causes and events Makes readers understand the problems in different applications because of EMI/EMC and the reducing methods Explores real-world case studies with code to provide hands-on experience Reviews design strategies for mitigation of noise Includes MATLAB, PSPICE, and ADS simulations for designing EMI Filter circuits. The book is aimed at graduate students and researchers in electromagnetics, circuit and systems, and electrical engineering.

Download or read book Conducted Electromagnetic Interference EMI in Smart Grids written by Robert Smolenski and published by Springer Science & Business Media. This book was released on 2012-03-23 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: As power systems develop to incorporate renewable energy sources, the delivery systems may be disrupted by the changes involved. The grid’s technology and management must be developed to form Smart Grids between consumers, suppliers and producers. Conducted Electromagnetic Interference (EMI) in Smart Grids considers the specific side effects related to electromagnetic interference (EMI) generated by the application of these Smart Grids. Conducted Electromagnetic Interference (EMI) in Smart Grids presents specific EMI conducted phenomena as well as effective methods to filter and handle them once identified. After introduction to Smart Grids, the following sections cover dedicated methods for EMI reduction and potential avenues for future development including chapters dedicated to: •potential system services, •descriptions of the EMI spectra shaping methods, •methods of interference voltage compensation, and theoretical analysis of experimental results. By focusing on these key aspects, Conducted Electromagnetic Interference (EMI) in Smart Grids provides a concise and comprehensive coverage of an extensive subject matter. It constitutes a key resource for any industry practitioners, researchers or system designers with interest in Smart Grids, particularly their electromagnetic compatibility in the conducted EMI frequency range.

Download or read book Principles and Techniques of Electromagnetic Compatibility written by Christos Christopoulos and published by CRC Press. This book was released on 1995-02-22 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike other publications, this new book offers a different approach to the study of electromagnetic compatibility (EMC). It emphasizes the understanding of relevant electromagnetic interactions in increasingly complex systems. Mathematical tools are introduced when pursuing the physical picture unaided becomes counterproductive. In order to handle complexity, numerical tools are developed and the basis and capabilities of these tools are presented. Part I of the book covers underlying concepts and techniques. This includes discussions on electromagnetic fields, electrical circuit components, and electrical signals and circuits. The second part deals with general EMC concepts and techniques and will be useful for predicting the EMC behavior of systems. More practical techniques used to control electromagnetic interference and the design of EMC into products are presented in Part III. The main EMC standards and test techniques are described in the final part of the book. Chapters are designed to allow readers to study the entire book at a pace which reflects their own background and interests. The book appeals to both EMC applications-oriented and analysis-oriented readers. This text provides useful source material for a serious study of EMC, including references to more advanced work.

Download or read book Electronic Systems Failures and Anomalies Attributed to Electromagnetic Interference written by R. D. Leach and published by . This book was released on 1995 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Spacecraft Electromagnetic Compatibility Technologies written by Hua Zhang and published by Springer Nature. This book was released on 2020-07-27 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores key techniques and methods in electromagnetic compatibility management, analysis, design, improvement and test verification for spacecraft. The first part introduces the general EMC technology of spacecraft, the electromagnetic interference control method and management of electromagnetic compatibility. The second part discusses the EMC prediction analysis technique and its application in spacecraft, while the third presents the EMC design of spacecraft modules and typical equipment. The final two parts address spacecraft magnetic design testing technologies and spacecraft testing technologies. The book also covers the program control test process, the special power control unit (PCU), electric propulsion, PIM test and multipaction testing for spacecraft, making it a valuable resource for researchers and engineers alike.

Download or read book Electromagnetic Compatibility in Power Electronics written by László Tihanyi and published by Newnes. This book was released on 1995 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics professionals will find this book invaluable when designing power equipment, because it describes in detail how to cope with the problem of electromagnetic interference. The author shows how to meet the exacting US and European EMC standards for conducted emissions. The book includes a wide range of EMI analysis techniques. An important focus is on the energy content of interference transient signals (traditional analysis concentrates on amplitude and frequency). This provides a more accurate picture of the EMI situation. For those who do not want or need detailed analysis techniques, many approximation methods are also provided. These simplified techniques give accurate results for all but the most stringent applications. The book contains several worked examples and an extensive bibliography, and is sure to be useful to electronic design engineers and others who need to meet international EMC regulations and standards. Laszlo Tihanyi has worked on EMC for over 20 years. Formerly Head of the Department of Power Electronics at the Hungarian Research Institute for the Electrical Industry, he focused primarily on solving EMI problems in electronic systems and developing a dimensioning method for power line filters.

Download or read book Recent Topics in Electromagnetic Compatibility written by Ahmed Kishk and published by BoD – Books on Demand. This book was released on 2022-02-23 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Topics in Electromagnetic Compatability discusses several topics in electromagnetic compatibility (EMC) and electromagnetic interference (EMI), including measurements, shielding, emission, interference, biomedical devices, and numerical modeling. Over five sections, chapters address the electromagnetic spectrum of corona discharge, life cycle assessment of flexible electromagnetic shields, EMC requirements for implantable medical devices, analysis and design of absorbers for EMC applications, artificial surfaces, and media for EMC and EMI shielding, and much more.

Download or read book A Handbook Series on Electromagnetic Interference and Compatibility written by Donald R. J. White and published by . This book was released on 1980 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electromagnetic Compatibility of Electric Vehicle written by Li Zhai and published by Springer Nature. This book was released on 2021-01-30 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the electromagnetic compatibility(EMC) of electric vehicle(EV), including EMC of the whole vehicle, electromagnetic interference(EMI) prediction and suppression of motor drive system, EMI prediction and suppression of DC-DC converter, electromagnetic field safety and EMC of wireless charging system, signal integrity and EMC of the vehicle controller unit(VCU), EMC of battery management system(BMS), electromagnetic radiated emission diagnosis and suppression of the whole vehicle, etc. The analysis method, modeling and simulation method, test method and rectification method of EMC are demonstrated. The simulation and experimental results are presented as tables and figures. This book is useful as reference for graduate students, senior undergraduates and engineering technicians of vehicle engineering related majors. For EMI prediction, suppression and EMC optimization design for EVs, this book provides reference for engineers to solve EMC problems. This book is intended for senior undergraduates, postgraduates, lecturers and laboratory researchers engaged in electric vehicle and electromagnetic compatibility research.

Download or read book Electromagnetic Compatibility of Integrated Circuits written by Sonia Ben Dhia and published by Springer Science & Business Media. This book was released on 2006-06-04 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic Compatibility of Integrated Circuits: Techniques for Low Emission and Susceptibility focuses on the electromagnetic compatibility of integrated circuits. The basic concepts, theory, and an extensive historical review of integrated circuit emission and susceptibility are provided. Standardized measurement methods are detailed through various case studies. EMC models for the core, I/Os, supply network, and packaging are described with applications to conducted switching noise, signal integrity, near-field and radiated noise. Case studies from different companies and research laboratories are presented with in-depth descriptions of the ICs, test set-ups, and comparisons between measurements and simulations. Specific guidelines for achieving low emission and susceptibility derived from the experience of EMC experts are presented.