Download or read book Processing Techniques and Tribological Behavior of Composite Materials written by Tyagi, Rajnesh and published by IGI Global. This book was released on 2015-01-31 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understanding of friction and wear behavior of materials is crucial in order to improve their performance and durability. New research is providing the opportunity to solve common problems relating to the development of materials, surface modification, coatings, and processing methods across industries. Processing Techniques and Tribological Behavior of Composite Materials provides relevant theoretical frameworks and the latest empirical research findings on the strategic role of composite tribology in a variety of settings. This book is intended for students, researchers, academicians, and professionals working in industries where wear reduction and performance enhancement of machines and machine elements is essential to success.
Download or read book Electrodeposition of Composite Materials written by A.M.A Mohamed and published by BoD – Books on Demand. This book was released on 2016-03-23 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposite coatings have various properties that can be utilized for corrosion protection and tribological improvements. Synthesis of the nanocomposite coatings using an electrodeposition method allows unique control of the experimental parameters. By fine tuning the experimental parameters, various compositions and properties can be obtained for the nanocomposite coatings. This book covers some of the electrochemical methods used for nanocomposite coating deposition as well as discusses in detail examples of several nanocomposite coating. The corrosion and tribological performance of the nanocomposite coatings are also covered and some nanocomposite coatings are discussed for specific technological areas, such as fuel cells and microelectronics.
Download or read book Nanomaterials Based Coatings written by Phuong Nguyen Tri and published by Elsevier. This book was released on 2019-05-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials-Based Coatings: Fundamentals and Applications presents the fundamental concepts and applications of nanomaterial-based coatings in anticorrosion, antiwear, antibacterial, antifungal, self-cleaning, superhydrophobic, super hard, super heat resistance, solar reflective, photocatalytic and radar absorbing coatings. It is an important resource for those seeking to understand the underlying phenomenal and fundamental mechanisms through which nanoparticles interact with polymeric and metallic matrices to create stronger coatings. As nanomaterials-enforced coatings are smarter, stronger and more durable, the information listed in this book will helps readers understand their usage and further applications. - Highlights the latest methods in design, preparation and characterization techniques for nanomaterials-based coatings - Discusses emerging applications of nanomaterials-based coatings, including substrates protection, sustainable energy, and in the environment and healthcare - Assesses the major challenges in making nanomaterials-based coatings more reliable and cost-effective
Download or read book Aerospace Materials Handbook written by Sam Zhang and published by CRC Press. This book was released on 2016-04-19 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether an airplane or a space shuttle, a flying machine requires advanced materials to provide a strong, lightweight body and a powerful engine that functions at high temperature. The Aerospace Materials Handbook examines these materials, covering traditional superalloys as well as more recently developed light alloys. Capturing state-of-the-art d
Download or read book Advances in Materials Mechanics and Manufacturing III written by Mounir Ben Amar and published by Springer Nature. This book was released on with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tribology and Sustainability written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2021-08-26 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology and Sustainability brings a vision of promoting a greener, cleaner and eco-friendly environment by highlighting sustainable solutions in tribology via the development of self-lubricating materials, green additives in lubricants, natural fibre-reinforced materials and biomimetic approaches. Backed by supporting schematic diagrams, data tables and illustrations for easy understanding, the book focuses on recent advancements in tribology and sustainability. Global sustainability and regional requirements are addressed through chapters on natural composites, green lubricants, biomedical systems and wind energy systems, with a dedicated chapter on a global sustainability scenario. FEATURES Highlights sustainability via new tribological approaches and how such methods are essential Covers the theoretical aspects of various tribological topics concerning mechanical and material designs for energy-efficient systems Includes practical global sustainability based on the regional requirements of tribological research and sustainable impact Reviews the tribology of green lubricants, green additives and lightweight materials Discusses topics related to biomimetics and biotribology Tribology and Sustainability will assist researchers, professionals and graduate students in tribology, surface engineering, mechanical design and materials engineering, including mechanical, aerospace, chemical and environmental engineering.
Download or read book Electrochemical Synthesis of Nanoengineered Materials and Their Applications written by Nosang Vincent Myung and published by Frontiers Media SA. This book was released on 2019-12-27 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanocomposite Coatings written by Mahmood Aliofkhazraei and published by Nova Science Pub Incorporated. This book was released on 2011-01-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews research activities around fabrication of these kinds of two dimensional nanostructured coatings with examples of enhanced mechanical properties, corrosion resistance, and physical characteristics. As one of the useful and simple methods for fabrication of nanocomposite coatings, electrochemical deposition (electroplating) techniques are a strong focus in this book. The relation among nanotechnology and these kinds of nanostructures that come from "size effect" and "distribution effect" is discussed through different chapters of this book. Nanocomposite coatings have numerous advantages.
Download or read book Electroless Nickel Plating Fundamentals to Applications written by Fabienne Delaunois and published by CRC Press. This book was released on 2019-10-30 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroless Nickel Plating: Fundamentals to Applications provides a complete and actualized view of electroless nickel plating, thus greatly improving the accessibility of knowledge on the subject. It touches upon all aspects of electroless nickel, from the fundamentals (including thermodynamics of electroless plating, bath chemistry, and substrate preparation) to more applied areas of the field such as bath replenishment, composite coatings, post-treatments, polyalloys, graded and multilayer coatings, ultrasound assistance, applications, and properties. Contributed to by a variety of international authors to ensure different points of view and interests are addressed, this book stands as the first complete and updated state-of-the-art text on electroless nickel in the twenty-first century. It also serves as the first technical book with a strong emphasis on nickel-boron. It also focuses on environmental aspects. Including cutting-edge content presented sufficiently extensive to be directly useful to the practitioner, this book is aimed at materials scientists, metallurgists, and other professionals working with electroless nickel plating.
Download or read book Corrosion Protection at the Nanoscale written by Susai Rajendran and published by Elsevier. This book was released on 2020-03-10 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Protection at the Nanoscale explores fundamental concepts on how metals can be protected at the nanoscale by using both nanomaterials-based solutions, including nanoalloys, noninhibitors and nanocoatings. It is an important reference resource for both materials scientists and engineers wanting to find ways to create an efficient corrosion prevention strategy. Nanostructure materials have been widely used in many products, such as print electronics, contact, interconnection, implant, nanosensors and display units to lessen the impact of corrosion. Traditional methods for protection of metals include various techniques, such as coatings, inhibitors, electrochemical methods (anodic and cathodic protections), metallurgical design are covered in this book. Nanomaterials-based protective methods can offer many advantages over their traditional counterparts, such as protection for early-stage, higher corrosion resistance, better corrosion control. This book also outlines these advantages and discusses the challenges of implementing nanomaterials as corrosion protection agents on a wide scale. - Explains the main methods of detection, monitoring, testing, measurement and simulation of corrosion at the nanoscale - Explores how metals can be protected at the nanoscale using nanotechnology and nanomaterials - Discusses the major challenges of detecting and preventing corrosion at the nanoscale
Download or read book Tribology Friction and Wear of Engineering Materials written by Hutchings and published by Springer. This book was released on 1992 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology covers the fundamentals of tribology and the tribological response of all types of materials, including metals, ceramics, and polymers. The book provides a solid scientific foundation without relying on extensive mathematics, an approach that will allow readers to formulate appropriate solutions when faced with practical problems. Topics considered include fundamentals of surface topography and contact, friction, lubrication, and wear. The book also presents up-to-date discussions on the treatment of wear in the design process, tribological applications of surface engineering, and materials for sliding and rolling bearings. Tribology will be valuable to engineers in the field of tribology, mechanical engineers, physicists, chemists, materials scientists, and students. Features Provides an excellent general introduction to the friction, wear, and lubrication of materials Presents a balanced comparison of the tribological behavior of metals, ceramics, and polymers Includes discussions on tribological applications of surface engineering and materials for sliding and rolling bearings Emphasizes the scientific foundation of tribology Discusses the treatment of wear in the design process Uses SI units throughout and refers to U.S., U.K., and other European standards and material designations
Download or read book Friction Lubrication and Wear written by Mohammad Asaduzzaman Chowdhury and published by BoD – Books on Demand. This book was released on 2019-10-30 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology has rapidly expanded in recent years as the demand for improved materials has increased. The good function of numerous electrical, electrochemical, mechanical, and biological systems or components depends on suitable friction, lubrication, and wear as well as tribological values. In this context, the study of friction, wear, and lubrication is of tremendous pragmatic importance. The reduction of friction and loss of materials in relative motion are important challenges to improveing energy efficiency. This book guides the rational design of material for technological application. Chapters cover topics such as the resistance of dry abrasive wear, the role of a brand-new additive in the minimization of friction and wear, the structural-energy model of elastic-plastic deformation, the influence of micro-abrasive wear modes, tribological characteristics of magneto-rheological fluids (MRFs) and magneto-rheological elastomers (MREs), and different treatment technologies to improve tribological properties, among others.
Download or read book Metals Abstracts Index written by and published by . This book was released on 1996 with total page 1622 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Carbon Nanomaterials Modeling Design and Applications written by Kun Zhou and published by CRC Press. This book was released on 2019-07-17 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon Nanomaterials: Modeling, Design, and Applications provides an in-depth review and analysis of the most popular carbon nanomaterials, including fullerenes, carbon nanotubes, graphene and novel carbon nanomaterial-based membranes and thin films, with emphasis on their modeling, design and applications. This book provides basic knowledge of the structures, properties and applications of carbon-based nanomaterials. It illustrates the fundamental structure-property relationships of the materials in both experimental and modeling aspects, offers technical guidance in computational simulation of nanomaterials, and delivers an extensive view on current achievements in research and practice, while presenting new possibilities in the design and usage of carbon nanomaterials. This book is aimed at both undergraduate and graduate students, researchers, designers, professors, and professionals within the fields of materials science and engineering, mechanical engineering, applied physics, and chemical engineering.
Download or read book Materials and Surface Engineering in Tribology written by Jamal Takadoum and published by John Wiley & Sons. This book was released on 2013-05-10 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is designed to provide a clear and comprehensive overview of tribology. The book introduces the notion of a surface in tribology where a solid surface is described from topographical, structural, mechanical, and energetic perspectives. It also describes the principal techniques used to characterize and analyze surfaces. The title then discusses what may be called the fundamentals of tribology by introducing and describing the concepts of adhesion, friction, wear, and lubrication. The book focuses on the materials used in tribology, introducing the major classes of materials used, either in their bulk states or as coatings, including both protective layers and other coatings used for decorative purposes. Of especial importance to the tribology community are sections that provide the latest information on Nanotribology, Wear, Lubrication, and Wear-Corrosion: Tribocorrosion and Erosion-Corrosion.
Download or read book Advanced Ceramic Coatings written by Ram Gupta and published by Elsevier. This book was released on 2023-06-20 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Advanced Ceramic Coatings: Fundamentals, Manufacturing and Classification introduces ceramic coating materials, methods of fabrication, characterizations, the interaction between fillers, reinforcers, and environmental impact, and the functional classification of ceramic coatings. The book is one of four volumes that together provide a comprehensive resource in the field of Advanced Ceramic Coatings, also including titles covering energy, biomedical and emerging applications. These books will be extremely useful for academic and industrial researchers and practicing engineers who need to find reliable and up-to-date information about recent progresses and new developments in the field of advanced ceramic coatings. Smart ceramic coatings containing multifunctional components are now finding application in transportation and automotive industries, in electronics, and energy sectors, in aerospace and defense, and in industrial goods and healthcare. Their wide application and stability in harsh environments are only possible due to the stability of the inorganic components used. Ceramic coatings are typically silicon nitride, chromia, hafnia, alumina, alumina-magnesia, silica, silicon carbide, titania, and zirconia-based compositions. The increased demand for these materials and their application in energy, transportation, and the automotive industry, are considered, to be the main drivers. - Comprehensively covers the production, characterization and properties of advanced ceramic coatings - Features the latest manufacturing processes - Covers basic principles of surface chemistry, along with the fundamentals of ceramic materials and engineering - Features the latest progress and recent technological developments - Discusses basic science relevant to both the materials and preparation methods
Download or read book Plasma Electrolytic Oxidation PEO Coatings written by Marta Mohedano and published by MDPI. This book was released on 2021-06-02 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma electrolytic oxidation (PEO), also known as micro-arc oxidation (MAO), functionalizes surfaces, improving the mechanical, thermal, and corrosion performance of metallic substrates, along with other tailored properties (e.g., biocompatibility, catalysis, antibacterial response, self-lubrication, etc.). The extensive field of applications of this technique ranges from structural components, in particular, in the transport sector, to more advanced fields, such as bioengineering. The present Special Issue covers the latest advances in PEO‐coated light alloys for structural (Al, Mg) and biomedical applications (Ti, Mg), with 10 research papers and 1 review from leading research groups around the world.
