Download or read book Electrochemical Studies on Carbon Dioxide Corrosion and Its Inhibition written by Yong-jun Tan and published by . This book was released on 1996 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion product scales formed under different conditions were investigated using EIS and surface analysis techniques. Temperature, pressure and exposure time were confirmed to be the important factors influencing the degree of protection given by the scale. The morphology of corrosion scales showed an obvious correlation to their protective ability. Electron microscopy revealed two types of crystal structures on corroded steel coupons. The smaller crystals associated with one of these structures was found to contribute most to corrosion protection. Several typical CO(subscript)2 corrosion inhibitors, including an imidazoline and a quaternised amine, were studied by EIS. A multi-layer model was employed to explain the EIS characteristics and self-repairing ability of imidazoline films. A quaternised amine film is most probably a physically or electrostatically adsorbed molecular layer which forms rapidly and desorbs easily. The deterioration of films, formed by commercial batch treatment inhibitors, was found to occur in three stages which were indicated or characterised by Bode phase-angle plots. A method to determine inhibitor film persistency was developed. This method is based on determining the three stages of inhibitor film deterioration, and the continuous measurement of corrosion rate, which is accessible at the second and third stages of film deterioration.
Download or read book Electrochemical Model of Carbon Dioxide Corrosion in the Presence of Organic Corrosion Inhibitors written by Juan M. Dominguez Olivo and published by . This book was released on 2020 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal corrosion in pipelines is a significant issue in the upstream oil and gas industry. Corrosion engineers have developed strategies to mitigate corrosion, and among these, the use of organic corrosion inhibitors is one of the most widely used solutions. Corrosion inhibitors are substances that significantly reduce corrosion when added in small, typically ppm level, concentrations. Knowledge related to their efficiency, and associated mechanisms of inhibition, has been developed by conducting experiments in physicochemical conditions that simulate field environments during their application. Nonetheless, there is a lack of studies in the open literature that mechanistically define the effect of corrosion inhibitors on the kinetics of the electrochemical processes underlying corrosion. Consequently, the central objective of this research was to propose a mechanistic model that describes and predicts the effect of organic corrosion inhibitors on the electrochemical processes governing the carbon dioxide corrosion of mild steel. In order to develop the mechanistic model, corrosion studies included the electrochemical characterization of aqueous steel corrosion in the presence of known corrosion inhibitor packages (quaternary-ammonium-type and imidazoline-type) with techniques such as linear polarization resistance (LPR), electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization. During these experiments, the state-of-the-art knowledge on corrosion inhibition available in the open literature related to corrosion inhibition was insufficient to explain specific experimental observations satisfactorily. This situation led to the postulation of ad hoc hypotheses to explain the effect of the organic corrosion inhibitors’ molecular structure on the observed electrochemical kinetics for the corrosion process, namely, the effects of inhibitor alkyl tail length and head group.
Download or read book Green Corrosion Inhibitors written by V. S. Sastri and published by John Wiley & Sons. This book was released on 2012-02-14 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book to cover developments in corrosion inhibitors is long overdue. This has been addressed by Dr Sastri in a book which presents fundamental aspects of corrosion inhibition, historical developments and the industrial applications of inhibitors. The book deals with the electrochemical principles and chemical aspects of corrosion inhibition, such as stability of metal complexes, the Hammett equation, hard and soft acid and base principle, quantum chemical aspects and Hansch' s model and also with the various surface analysis techniques, e.g. XPS, Auger, SIMS and Raman spectroscopy, that are used in industry for corrosion inhibition. The applications of corrosion inhibition are wide ranging. Examples given in this book include: oil and gas wells, petrochemical plants, steel reinforced cement, water cooling systems, and many more. The final chapters discuss economic and environmental considerations which are now of prime importance. The book is written for researchers in academia and industry, practicing corrosion engineers and students of materials science, engineering and applied chemistry.
Download or read book Electrochemical Impedance written by John R. Scully and published by ASTM International. This book was released on 1993 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: The collection of twenty-seven papers published has been grouped into six major categories : corrosion process characterization and modeling, applications of Kramers-Kronig transformations for evaluating the validity of data, corrosion and its inhibition by either corrosion products of specially added inhibitors, corrosion of aluminum and aluminum alloys, corrosion of steel in soils and concrete, and evaluation of coatings on metal substrates.
Download or read book Environmentally Friendly Corrosion Inhibitors for the Amine Based CO2 Absorption Process written by Sureshkumar Srinivasan and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.
Download or read book Heterocyclic Organic Corrosion Inhibitors written by Mumtaz A. Quraishi and published by Elsevier. This book was released on 2020-03-07 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterocyclic Organic Corrosion Inhibitors: Principles and Applications aims to comprehend the synthesis and application of organic heterocyclic compounds as corrosion inhibitors in various corrosive environments. Considering the high importance of corrosion inhibitor development for different industries, the book provides the fundamentals and most recent advancements in this field. The book is an indispensable reference tool for industrialists and academicians working in the field of corrosion protection. Provides a systematic overview of fundamentals and current advancements Acts as a primary reference for beginner researchers in this arena Presents a handy reference tool to different chemical industries Covers fundamentals, industrial applications and most recent advancements in this area
Download or read book Corrosion in CO2 Capture Transportation Geological Utilization and Storage written by Liwei Zhang and published by Springer Nature. This book was released on 2023-07-21 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically discusses the operational stages with high risk of CO2-induced corrosion in CCUS projects, and related measures for corrosion control. CO2 capture, utilization, and storage (CCUS) is a key technology to mitigate climate change and substantially reduce greenhouse gas emissions from fossil fuels. CCUS deals with high concentration CO2, which is very corrosive in a humid environment. Therefore, it is very important to characterize, monitor, and mitigate CO2-induced corrosion in all processes of the CCUS operation chain. Some corrosion control techniques included in this book (e.g., CO2-resisting wellbore cement additives) are beneficial for corrosion control research and engineering practices. This book belongs to the field of corrosion science and engineering, and the expected readership is researchers and engineers working on CCUS.
Download or read book Heterogeneous Electrode Processes and Localized Corrosion written by Mike Yongjun Tan and published by John Wiley & Sons. This book was released on 2012-10-09 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheds new light on the significance of electrode inhomogeneity and electrochemical heterogeneity A major contribution to the field of electrochemistry, this book—based on a thorough review of the literature and author Yongjun Tan's twenty years of pioneering research—examines electrochemical heterogeneity and its effects on non-uniform electrode processes. The book focuses on localized corrosion, uneven electrodeposition, and non-uniform electrodissolution. Readers will learn all the core fundamentals, experimental methods, and engineering aspects of localized corrosion and other important heterogeneous electrode processes. In particular, readers will learn core methods to quickly calculate corrosion rates and study electrode inhomogeneity and electrochemical heterogeneity. Heterogeneous Electrode Processes and Localized Corrosion begins with a review of homogeneous electrode models and uniform corrosion measurements and then explores probing electrode inhomogeneity, electrochemical heterogeneity, and localized corrosion. Next, the book examines: Visualizing localized corrosion using electrochemically integrated multi-electrode arrays Measuring thermodynamic and kinetic parameters of localized corrosion processes Characterizing inhomogeneity and localized corrosion on coated electrode surfaces Designing experiments to study localized corrosion and its inhibition in inhomogeneous media Sensing localized electrodeposition and electrodissolution Exploring versatile heterogeneous electrode processes Throughout the book, there are case studies with maps that illustrate key aspects of heterogeneous electrode processes. In addition, the author provides plenty of examples that enable readers to fully grasp core concepts of electrochemical heterogeneity and its relationship to non-uniform electrode processes. Reviewing the experimental findings presented in this book, electrochemists will gain a better appreciation and understanding of the fundamental significance of electrode inhomogeneity and electrochemical heterogeneity.
Download or read book Green Inhibition of Mild Steel Corrosion in a Carbon Dioxide Saturated Saline Solution written by Elron Edgar Gomes and published by . This book was released on 2015 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Mild steel is extensively used in equipment such as pipelines and machinery by many industries, where it is exposed to corrosive environments. Dissolved carbon dioxide (CO2) can be found in produced water and results in severe corrosion due to the formation of carbonic acid. CO2 corrosion presents not only an economic loss but also an environmental and safety risk. Most industries use synthetic inhibitors, which are effective in reducing corrosion, but are also toxic and persistent. This has led to stricter regulations and thus, there is a need for alternative inhibitors which can replace them but not exhibit their undesired characteristics. The aqueous extracts of Fig leaves (FLE), Calotropis procera (CPLE) and Eggplant peels (EPPE) were investigated as novel corrosion inhibitors for mild steel in a CO2-saturated 3.5wt% NaCl solution using various electrochemical techniques such as linear polarization resistance (LPR), electrochemical impedance spectroscopy (EIS) and cyclic sweep (CS). The results showed that the corrosion rate is decreasing and inhibition efficiency is increasing as the concentration of inhibitor increased. Corrosion inhibition efficiencies of 90-95% were obtained using low dosage of the green inhibitors. FLE, CPLE and EPPE proved to be effective inhibitors and are compared to the performance of two commercially available inhibitors, A (green inhibitor) and B (synthetic inhibitor). Polarization studies show that FLE, CPLE and EPPE act as mixed inhibitors. The adsorption data was analyzed using various adsorption isotherm models and the results at temperatures of 25, 40, 50 and 70°C have shown that the adsorption behavior of FLE, CPLE and EPPE is best described by the Langmuir adsorption isotherm. The conclusion drawn from this work is that the FLE, CLE and ELE inhibitors proved to be effective inhibitors when compared to Inhibitor A. Inhibitor B proved to be a much more effective inhibitor than the others due to its synergistic mix of active ingredients."--Abstract.
Download or read book Handbook of Science Engineering of Green Corrosion Inhibitors written by Chandrabhan Verma and published by Elsevier. This book was released on 2021-12-01 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Science and Engineering of Green Corrosion Inhibitors wraps up new developments in green corrosion inhibitors and their current applications. The book provides a comprehensive overview of green corrosion inhibitors such as plant extracts, chemical medicines, natural polymers, synthetic green compounds, carbohydrates, amino acids, oleochemicals etc. that can cost-effectively minimize corrosive damage. It handles several green compounds that are used as anticorrosive materials for different metals and alloys in a versatile corrosive environment. Handbook of Science and Engineering of Green Corrosion Inhibitors addresses fundamental characteristics of green corrosion inhibition. It deals with the economic impact of corrosion, forms of corrosion and its assessment and classification of corrosion inhibitors. The book covers a broad range of applications in green corrosion inhibition and concludes with new emerging trends in corrosion protection such as high temperature corrosion and its protection and nanomaterials as corrosion inhibitors. Provides an overview of environmentally sustainable (green) corrosion inhibitors utilized in modern industrial platforms Evaluates corrosion inhibitors as prime option for sustainable and transformational opportunities Serves as a valuable reference for scientists and engineers who are searching modern design for corrosion inhibitors Covers both synthetic and natural environmental-friendly corrosion inhibitors
Download or read book Organic Corrosion Inhibitors written by Chandrabhan Verma and published by John Wiley & Sons. This book was released on 2021-09-11 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of organic corrosion inhibitors used in modern industrial platforms, including current developments in the design of promising classes of organic corrosion inhibitors Corrosion is the cause of significant economic and safety-related problems that span across industries and applications, including production and processing operations, transportation and public utilities infrastructure, and oil and gas exploration. The use of organic corrosion inhibitors is a simple and cost-effective method for protecting processes, machinery, and materials while remaining environmentally acceptable. Organic Corrosion Inhibitors: Synthesis, Characterization, Mechanism, and Applications provides up-to-date coverage of all aspects of organic corrosion inhibitors, including their fundamental characteristics, synthesis, characterization, inhibition mechanism, and industrial applications. Divided into five sections, the text first covers the basics of corrosion and prevention, experimental and computational testing, and the differences between organic and inorganic corrosion inhibitors. The next section describes various heterocyclic and non-heterocyclic corrosion inhibitors, followed by discussion of the corrosion inhibition characteristics of carbohydrates, amino acids, and other organic green corrosion inhibitors. The final two sections examine the corrosion inhibition properties of carbon nanotubes and graphene oxide, and review the application of natural and synthetic polymers as corrosion inhibitors. Featuring contributions by leading researchers and scientists from academia and industry, this authoritative volume: Discusses the latest developments and issues in the area of corrosion inhibition, including manufacturing challenges and new industrial applications Explores the development and implementation of environmentally-friendly alternatives to traditional toxic corrosion inhibitors Covers both established and emerging classes of corrosion inhibitors as well as future research directions Describes the anticorrosive mechanisms and effects of acyclic, cyclic, natural, and synthetic corrosion inhibitors Offering an interdisciplinary approach to the subject, Organic Corrosion Inhibitors: Synthesis, Characterization, Mechanism, and Applications is essential reading for chemists, chemical engineers, researchers, industry professionals, and advanced students working in fields such as corrosion inhibitors, corrosion engineering, materials science, and applied chemistry.
Download or read book Trends in Oil and Gas Corrosion Research and Technologies written by A. M. El-Sherik and published by Woodhead Publishing. This book was released on 2017-06-09 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends in Oil and Gas Corrosion Research and Technologies: Production and Transmission delivers the most up-to-date and highly multidisciplinary reference available to identify emerging developments, fundamental mechanisms and the technologies necessary in one unified source. Starting with a brief explanation on corrosion management that also addresses today’s most challenging issues for oil and gas production and transmission operations, the book dives into the latest advances in microbiology-influenced corrosion and other corrosion threats, such as stress corrosion cracking and hydrogen damage just to name a few. In addition, it covers testing and monitoring techniques, such as molecular microbiology and online monitoring for surface and subsurface facilities, mitigation tools, including coatings, nano-packaged biocides, modeling and prediction, cathodic protection and new steels and non-metallics. Rounding out with an extensive glossary and list of abbreviations, the book equips upstream and midstream corrosion professionals in the oil and gas industry with the most advanced collection of topics and solutions to responsibly help solve today’s oil and gas corrosion challenges. Covers the latest in corrosion mitigation techniques, such as corrosion inhibitors, biocides, non-metallics, coatings, and modeling and prediction Solves knowledge gaps with the most current technology and discoveries on specific corrosion mechanisms, highlighting where future research and industry efforts should be concentrated Achieves practical and balanced understanding with a full spectrum of subjects presented from multiple academic and world-renowned contributors in the industry
Download or read book Environmentally Sustainable Corrosion Inhibitors written by Chaudhery Mustansar Hussain and published by Elsevier. This book was released on 2021-09-15 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmentally Sustainable Corrosion Inhibitors: Fundamentals and Industrial Applications covers the latest research developments in environmentally friendly, sustainable corrosion inhibitors. The book addresses the fundamental characteristics, synthesis, characterization and mechanisms of corrosion inhibitors. In addition, it presents a chronological overview of the growth of the field, with numerous examples of its broad-ranging industrial applications in a.o. food, the environment, electronics, and the oil and gas industries. The book concludes with discussions about commercialization and economics. This is an indispensable reference for chemical engineers and chemists working in R&D and academia who want to learn more about environmentally-friendly, sustainable corrosion inhibitors systems. Explains how to use environmentally-friendly, sustainable corrosion inhibitors in modern industry and manufacturing Promotes corrosion inhibitors as a prime option for sustainable and transformational opportunities Provides up-to-date reference material, including websites of interest and information on the latest research
Download or read book Recent Researches in Corrosion Evaluation and Protection written by Reza Shoja Razavi and published by BoD – Books on Demand. This book was released on 2012-01-25 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to present and discuss the recent methods in corrosion evaluation and protection. The book contains six chapters. The aim of Chapter 1 is to demonstrate that Electrochemical Impedance Spectroscopy can be a very useful tool to provide a complete evaluation of the corrosion protection properties of electro-coatings. Chapter 2 presents results of studies of materials degradation from experimental electrochemical tests and theoretical calculations. Chapter 3 deals with the presentation of the corrosion and corrosion prevention of the aluminum alloys by organic coatings and inhibitors. Chapter 4 addresses the new method of pigment preparation that can improve protection efficiency. The effectiveness of plasma deposited films on the improvement of carbon steel corrosion resistance is discussed in Chapter 5. Chapter 6 deals with the conjugation of carbon nanotubes with organic-inorganic hybrid to prepare hybrid coatings that combine high anti-corrosion efficiency with elevated mechanical resistance.
Download or read book Corrosion Inhibition Performance of Methionine for CO2 Absorption Plants written by Balaji Udayappan and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inorganic corrosion inhibitors including heavy metals have been widely used in the carbon dioxide (CO2) absorption process for corrosion control. However, they are not environmentally friendly causing costly handling and disposal costs. This work therefore evaluated corrosion inhibition performance of an organic amino acid compound, namely Methionine (MTI) which is less toxic, more readily biodegradable, and has lower potential for bioaccumulation in aquatic organisms compared to common amine absorption solvents. The evaluation was experimentally implemented using electrochemical and weight loss methods. Carbon steel (CS1018) and 5.0 kmol/m3 Monoethanolamine (MEA) purged with 85% CO2 and 15% oxygen (O2) were used as tested material and absorption solution, respectively. The electrochemical results showed that at solution temperatures up to 80oC, MTI effectively reduced corrosion rates of CS1018 with maximum inhibition efficiencies of 83.56% ± 1.82% under a static condition (0 rpm) and 74.96% ± 0.95% under a dynamic condition (1500 rpm). Its inhibition performance was found to increase with inhibitor concentration and solution temperature but decrease with rotational speed. MTI acted as a mixed-type inhibitor and exhibited pitting tendency. The optimal MTI concentrations were 1500 ppm at 0 rpm and 2000 ppm at 1500 rpm. The post data analysis involving adsorption isotherm and activation thermodynamic properties revealed that MTI protected metal surface by undergoing spontaneous and endothermic physical adsorption. Its adsorption characteristic matched well with the Langmuir adsorption isotherm, thereby suggesting that MTI formed a protective monolayer on the metal surface. The results of quantum chemical analysis suggested MTI has higher affinity, polarizability, and electron donating ability than MEA. III The results of weight loss experiments carried out for up to 28 days showed that at 120oC, 5 bar and 1500 rpm, MTI was able to reduce corrosion rates of CS1018 to below 1 mmpy. The inhibition efficiencies were up to 78.7% for carbon steel specimens fully immersed in the MEA solutions, 53.5% for those partially immersed in the MEA solution and partially exposed to vapor, and 85.6% for those fully exposed to vapor. Pits were observed on carbon steel specimens fully immersed in both uninhibited and MTI inhibited solutions.
Download or read book Grafted Biopolymers as Corrosion Inhibitors written by Jeenat Aslam and published by John Wiley & Sons. This book was released on 2023-07-12 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: GRAFTED BIOPOLYMERS AS CORROSION INHIBITORS Comprehensive resource explaining the synthesis, characterization, and anticorrosive applications of green and environmentally benign grafted biopolymers and their derivatives Grafted Biopolymers as Corrosion Inhibitors highlight research and technology on sustainable grafted biopolymers as corrosion inhibitors and detail their rapidly emerging features and future research prospects. The many forms of grafted biopolymers and techniques for preventing corrosion are explored in relation to their macromolecular weights, chemical makeup, and distinctive molecular and electronic structures. The book covers state-of-the-art corrosion science and engineering as well as an in-depth, step-by-step exposition of knowledge on numerous corrosion systems and their role in contemporary industry. Each chapter include an introduction, isolation and purification, synthesis methods, worked examples, current applications, and future predictions. Edited and contributed to by well-known researchers, scientists and experts from academia and industry, Grafted Biopolymers as Corrosion Inhibitors includes information on: Basics of corrosion, economic adverse effects and its mitigation, and past and present developments and future directions of corrosion inhibition Corrosion inhibitor classification and selection criteria, chemical, electrochemical, and surface characterization, and computational techniques for corrosion monitoring Sustainable grafted biopolymers, covering synthesis and characterizations, properties and applications, and factors affecting biopolymers grafting Grafted natural exudates gums, pectin, chitosan, starch, cellulose, alginates, dextrin, and biopolymer composites and nanocomposites as sustainable corrosion inhibitors Delivering the recent advancements in sustainable grafted biopolymer for the anticorrosive applications arena, Grafted Biopolymers as Corrosion Inhibitors is an essential resource for scholars in academia and industry, working corrosion engineers, and materials science, engineering, and chemistry students.
