Download or read book Platinum Monolayer Electrocatalysts written by Radoslav Adzic and published by Springer. This book was released on 2021-08-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a science and technology of a new type of electrocatalysts consisting of a single atomic layer of platinum on suitable supports. This development helped overcome three major obstacles—catalysts‘ cost, activity, and stability—for a broad range of fuel cell applications. The volume begins with a short introduction to the science of electrocatalysis, covering four reactions important for energy conversion in fuel cells. A description follows of the properties of metal monolayers on electrode surfaces, and underpotential deposition of metals. The authors then describe the concept of Pt monolayer electrocatalysts and its implications and their synthesis by galvanic displacement of less-noble metal monolayers and other methods. The main part of the book presents a discussion of catalysts’ characterization and catalytic properties of Pt monolayers for the four main reactions of electrochemical energy conversion: oxygen reduction and oxidation of hydrogen, methanol and ethanol. The book concludes with a treatment of scale-up syntheses, fuel cell tests, catalysts’ stability and application prospects.
Download or read book PEM Fuel Cell Electrocatalysts and Catalyst Layers written by Jiujun Zhang and published by Springer Science & Business Media. This book was released on 2008-08-26 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proton exchange membrane (PEM) fuel cells are promising clean energy converting devices with high efficiency and low to zero emissions. Such power sources can be used in transportation, stationary, portable and micro power applications. The key components of these fuel cells are catalysts and catalyst layers. “PEM Fuel Cell Electrocatalysts and Catalyst Layers” provides a comprehensive, in-depth survey of the field, presented by internationally renowned fuel cell scientists. The opening chapters introduce the fundamentals of electrochemical theory and fuel cell catalysis. Later chapters investigate the synthesis, characterization, and activity validation of PEM fuel cell catalysts. Further chapters describe in detail the integration of the electrocatalyst/catalyst layers into the fuel cell, and their performance validation. Researchers and engineers in the fuel cell industry will find this book a valuable resource, as will students of electrochemical engineering and catalyst synthesis.
Download or read book Ambient Ionization Mass Spectrometry written by Marek Domin and published by Royal Society of Chemistry. This book was released on 2014-11-25 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ambient ionization has emerged as one of the hottest and fastest growing topics in mass spectrometry enabling sample analysis with minimal sample preparation. Introducing the subject and explaining the basic concepts and terminology, this book will provide a comprehensive, unique treatise devoted to the subject. Written by acknowledged experts, there are full descriptions on how new ionization techniques work, with an overview of their strengths, weaknesses and applications. This title will bring the reader right up to date, with both applications and theory, and will be suitable as a tutorial text for those starting in the field from a variety of disciplines.
Download or read book Sustainable Hydrogen Production written by Ibrahim Dincer and published by Elsevier. This book was released on 2016-08-05 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Hydrogen Production provides readers with an introduction to the processes and technologies used in major hydrogen production methods. This book serves as a unique source for information on advanced hydrogen generation systems and applications (including integrated systems, hybrid systems, and multigeneration systems with hydrogen production). Advanced and clean technologies are linked to environmental impact issues, and methods for sustainable development are thoroughly discussed. With Earth's fast-growing populations, we face the challenge of rapidly rising energy needs. To balance these we must explore more sustainable methods of energy production. Hydrogen is one key sustainable method because of its versatility. It is a constituent of a large palette of essential materials, chemicals, and fuels. It is a source of power and a source of heat. Because of this versatility, the demand for hydrogen is sure to increase as we aim to explore more sustainable methods of energy. Furthermore, Sustainable Hydrogen Production provides methodologies, models, and analysis techniques to help achieve better use of resources, efficiency, cost-effectiveness, and sustainability. The book is intellectually rich and interesting as well as practical. The fundamental methods of hydrogen production are categorized based on type of energy source: electrical, thermal, photonic, and biochemical. Where appropriate, historical context is introduced. Thermodynamic concepts, illustrative examples, and case studies are used to solve concrete power engineering problems. - Addresses the fundamentals of hydrogen production using electrical, thermal, photonic, and biochemical energies - Presents new models, methods, and parameters for performance assessment - Provides historical background where appropriate - Outlines key connections between hydrogen production methods and environmental impact/sustainable development - Provides illustrative examples, case studies, and study problems within each chapter
Download or read book Catalysts for Alcohol fuelled Direct Oxidation Fuel Cells written by Zhen-Xing Liang and published by Royal Society of Chemistry. This book was released on 2012 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art review on recent advances in nanocatalysts and electrocatalysis in DOFCs.
Download or read book Theory and Experiment in Electrocatalysis written by Perla B. Balbuena and published by Springer Science & Business Media. This book was released on 2010-11-02 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topics in Number 50 include: " Investigation of alloy cathode Electrocatalysts " A model Hamiltonian that incorporates the solvent effect to gas-phase density functional theory (DFT) calculations " DFT-based theoretical analysis of ORR mechanisms " Structure of the polymer electrolyte membranes (PEM) " ORR investigated through a DFT-Green function analysis of small clusters " Electrocatalytic oxidation and hydrogenation of chemisorbed aromatic compounds on palladium Electrodes " New models that connect the continuum descriptions with atomistic Monte Carlo simulations " ORR reaction in acid revisited through DFT studies that address the complexity of Pt-based alloys in electrocatalytic processes " Use of surface science methods and electrochemical techniques to elucidate reaction mechanisms in electrocatalytic processes " In-situ synchrotron spectroscopy to analyze electrocatalysts dispersed on nanomaterials From reviews of previous volumes: "Continues the valuable service that has been rendered by the Modern Aspects series."--Journal of Electroanalytical Chemistry "Extremely well-referenced and very readable ... Maintains the overall high standards of the series." --Journal of the American Chemical Society.
Download or read book Direct Methanol Fuel Cell Technology written by Kingshuk Dutta and published by Elsevier. This book was released on 2020-02-25 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Methanol Fuel Cell Technology presents the overall progress witnessed in the field of DMFC over the past decade, highlighting the components, materials, functions, properties and features, designs and configurations, operations, modelling, applications, pros and cons, social, political and market penetration, economics and future directions. The book discusses every single aspect of DMFC device technology, the associated advantages and drawbacks of state-of-the-art materials and design, market opportunities and commercialization aspects, and possible future directions of research and development. This book, containing critical analyses and opinions from experts around the world, will garner considerable interest among actual users/scientists/experts. - Analyzes developments of membrane electrolytes, electrodes, catalysts, catalyst supports, bipolar plates, gas diffusion layers and flow channels as critical components of direct methanol fuel cells - Includes modeling of direct methanol fuel cells to understand their scaling up potentials - Discusses commercial aspects of direct methanol fuel cells in terms of market penetration, end application, cost, viability, reliability, social and commercial perception, drawbacks and prospects
Download or read book Proceedings of the Symposium on Electrode Materials and Processes for Energy Conversion and Storage IV written by James McBreen and published by The Electrochemical Society. This book was released on 1997 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 5th European Symposium on Electrochemical Engineering written by A. A. Wragg and published by IChemE. This book was released on 1999 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Aspects of Electrochemical Engineering is the main theme of this symposium. It charts the way ahead for the future development and economic viability of all types of electrochemical processing.
Download or read book Proceedings of the Sixth International Symposium on Electrode Processes written by Andrzej Więckowski and published by The Electrochemical Society. This book was released on 1996 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Cell Engineering written by and published by Academic Press. This book was released on 2012-08-14 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are attractive electrochemical energy converters featuring potentially very high thermodynamic efficiency factors. The focus of this volume of Advances in Chemical Engineering is on quantitative approaches, particularly based on chemical engineering principles, to analyze, control and optimize the steady state and dynamic behavior of low and high temperature fuel cells (PEMFC, DMFC, SOFC) to be applied in mobile and stationary systems. - Updates and informs the reader on the latest research findings using original reviews - Written by leading industry experts and scholars - Reviews and analyzes developments in the field
Download or read book Graphene Carbon Nanotube Hybrids for Energy and Environmental Applications written by Wei Fan and published by Springer. This book was released on 2016-11-09 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes various carbon nanomaterials and their unique properties, and offers a detailed introduction to graphene–carbon nanotube (CNT) hybrids. It demonstrates strategies for the hybridization of CNTs with graphene, which fully utilize the synergistic effect between graphene and CNTs. It also presents a wide range of applications of graphene–CNT hybrids as novel materials for energy storage and environmental remediation. Further, it discusses the preparation, structures and properties of graphene–CNT hybrids, providing interesting examples of three types of graphene–CNT hybrids with different nanostructures. This book is of interest to a wide readership in various fields of materials science and engineering.
Download or read book Interfacial Electrochemistry written by Andrzej Wieckowski and published by Routledge. This book was released on 2017-11-22 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text probes topics and reviews progress in interfacial electrochemistry. It supplies chapter abstracts to give readers a concise overview of individual subjects and there are more than 1500 drawings, photographs, micrographs, tables and equations. The 118 contributors are international scholars who present theory, experimentation and applications.
Download or read book Nanocatalysts written by Indrajit Sinha and published by BoD – Books on Demand. This book was released on 2019-07-31 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocatalysis is a topical area of research that has huge potential. It attempts to merge the advantages of heterogeneous and homogeneous catalysis. The collection of articles in this book treats the topics of specificity, activity, reusability, and stability of the catalyst and presents a compilation of articles that focuses on different aspects of these issues.
Download or read book Electrocatalysis in Fuel Cells written by Minhua Shao and published by Springer Science & Business Media. This book was released on 2013-04-08 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are one of the most promising clean energy conversion devices that can solve the environmental and energy problems in our society. However, the high platinum loading of fuel cells - and thus their high cost - prevents their commercialization. Non- or low- platinum electrocatalysts are needed to lower the fuel cell cost. Electrocatalysis in Fuel Cells: A Non and Low Platinum Approach is a comprehensive book summarizing recent advances of electrocatalysis in oxygen reduction and alcohol oxidation, with a particular focus on non- and low-Pt electrocatalysts. All twenty four chapters were written by worldwide experts in their fields. The fundamentals and applications of novel electrocatalysts are discussed thoroughly in the book. The book is geared toward researchers in the field, postgraduate students and lecturers, and scientists and engineers at fuel cell and automotive companies. It can even be a reference book for those who are interested in this area.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Symposium on Electrode Materials and Processes for Energy Conversion and Storage written by Supramaniam Srinivasan and published by The Electrochemical Society. This book was released on 1994 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
