Download or read book Electrical Sensors and Transducers written by James R. Carstens and published by Prentice Hall. This book was released on 1993 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented in a unique format, this book covers the basics of transducers in an all- inclusive format.
Download or read book Sensors and Transducers written by Ian Sinclair and published by Elsevier. This book was released on 2000-12-05 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book Ian Sinclair provides the practical knowhow required by technician engineers, systems designers and students. The focus is firmly on understanding the technologies and their different applications, not a mathematical approach. The result is a highly readable text which provides a unique introduction to the selection and application of sensors, transducers and switches, and a grounding in the practicalities of designing with these devices.The devices covered encompass heat, light and motion, environmental sensing, sensing in industrial control, and signal-carrying and non-signal switches. - Get up to speed in this key topic through this leading practical guide - Understand the range of technologies and applications before specifying - Gain a working knowledge with a minimum of maths
Download or read book Ultrasonic Transducers written by K Nakamura and published by Elsevier. This book was released on 2012-08-23 with total page 749 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic transducers are key components in sensors for distance, flow and level measurement as well as in power, biomedical and other applications of ultrasound. Ultrasonic transducers reviews recent research in the design and application of this important technology.Part one provides an overview of materials and design of ultrasonic transducers. Piezoelectricity and basic configurations are explored in depth, along with electromagnetic acoustic transducers, and the use of ceramics, thin film and single crystals in ultrasonic transducers. Part two goes on to investigate modelling and characterisation, with performance modelling, electrical evaluation, laser Doppler vibrometry and optical visualisation all considered in detail. Applications of ultrasonic transducers are the focus of part three, beginning with a review of surface acoustic wave devices and air-borne ultrasound transducers, and going on to consider ultrasonic transducers for use at high temperature and in flaw detection systems, power, biomedical and micro-scale ultrasonics, therapeutic ultrasound devices, piezoelectric and fibre optic hydrophones, and ultrasonic motors are also described.With its distinguished editor and expert team of international contributors,Ultrasonic transducers is an authoritative review of key developments for engineers and materials scientists involved in this area of technology as well as in its applications in sectors as diverse as electronics, wireless communication and medical diagnostics. - Reviews recent research in the design and application of ultrasonic transducers - Provides an overview of the materials and design of ultrasonic transducers, with an in-depth exploration of piezoelectricity and basic configurations - Investigates modelling and characterisation, applications of ultrasonic transducers, and ultrasonic transducers for use at high temperature and in flaw detection systems
Download or read book Sensors and Transducers written by M. J. Usher and published by Palgrave. This book was released on 1996-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this text is to provide an integrated account of the principles and properties of the most important types of physical transducer, whether analogue or digital. The treatment is primarily from the measured standpoint, so that, for example, the different types of length transducer are discussed and compared together in one chapter.
Download or read book SENSORS AND TRANDUCERS written by D. PATRANABI and published by PHI Learning Pvt. Ltd.. This book was released on 2003-01-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a lucid presentation of the principles of working of all types of sensors and transducers which form the prime components of the instrumentation systems. The characteristics of the sensors and transducers and the operating principles of transducer technologies have been discussed in considerable detail. Besides covering conventional sensors such as electromechanical, thermal, magnetic, radiation, and electroanalytical, the recent advances in sensor technologies including smart and intelligent sensors used in automated systems are also comprehensively described. The application aspects of sensors used in several fields such as automobiles, manufacturing, medical, and environment are fully illustrated. With a straightforward approach the text is aimed at building a sound understanding of the fundamentals, and inculcating analytical skills needed for design and operation. Numerous schematic representations, examples, and review questions help transcend underlying basics to automation and instrumentation. The book with incisive explanations and all the pedagogic attributes is designed to serve the needs of the engineering students of instrumentation, chemical, mechanical, and electrical disciplines. It will also be a useful text for the students of applied sciences.
Download or read book Micro and Nano Scale Sensors and Transducers written by Ezzat G. Bakhoum and published by CRC Press. This book was released on 2016-03-09 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly emerging fields of nanotechnology and nano-fabrication have enabled the creation of new sensors with dramatic improvements in sensitivity and range, along with substantial miniaturization. And, although there are many books on nanotechnology, recent advances in micro and nano-scale sensors and transducers are not adequately represented
Download or read book Expanding the Vision of Sensor Materials written by Committee on New Sensor Technologies: Materials and Applications and published by National Academies Press. This book was released on 1995-07-06 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in materials science and engineering have paved the way for the development of new and more capable sensors. Drawing upon case studies from manufacturing and structural monitoring and involving chemical and long wave-length infrared sensors, this book suggests an approach that frames the relevant technical issues in such a way as to expedite the consideration of new and novel sensor materials. It enables a multidisciplinary approach for identifying opportunities and making realistic assessments of technical risk and could be used to guide relevant research and development in sensor technologies.
Download or read book Sensors and Circuits written by Joseph J. Carr and published by Prentice Hall. This book was released on 1993 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive reference providing detailed treatment of sensors ranging from simple thermistors to strain gauges, electro-optics, and medical laboratory sensors. Practical application and interfacing to both analog and digital circuits are included. Covers the latest analog-to-digital converters for sensor interfacing to computers and interfacing sensors to the IBM-PC series computers. Also delivers a wealth of vital application examples. Intended for practical design of instrumentation devices. KEY FEATURES: - provides grounding, shielding, and interference reduction strategies. - includes in-depth coverage of noise and its effects on sensor signal processing. - covers DC power supply and excitation sources for sensors.
Download or read book Test and Measurement Know It All written by Jon S. Wilson and published by Newnes. This book was released on 2008-10-10 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Newnes Know It All Series takes the best of what our authors have written to create hard-working desk references that will be an engineer's first port of call for key information, design techniques and rules of thumb. Guaranteed not to gather dust on a shelf! Field Application engineers need to master a wide area of topics to excel. The Test and Measurement Know It All covers every angle including Machine Vision and Inspection, Communications Testing, Compliance Testing, along with Automotive, Aerospace, and Defense testing. A 360-degree view from our best-selling authors Topics include the Technology of Test and Measurement, Measurement System Types, and Instrumentation for Test and Measurement The ultimate hard-working desk reference; all the essential information, techniques and tricks of the trade in one volume
Download or read book Transducer Interfacing Handbook written by Analog Devices, inc and published by . This book was released on 1980 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tranducer as a circuit element. Interfacing considerations - bridges. Interfacing considerations - interference. Amplifiers and signal translation. Offseting and linearizing. Overall considerations. 2 interface-design examples. Thermoswitches and thermocouples. Resistance temperature detectors (RTDs). Thermistor interfacing. Semiconductor temperature transducers. Pressure-transducer interfacing. Force-transducer interfacing. Flowmeter interfacing. Interfacing level transducers. Application miscellany.
Download or read book TRANSDUCERS ENGINEERING written by S. VIJAYACHITRA and published by PHI Learning Pvt. Ltd.. This book was released on 2016-07-08 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective of this book is to cover different types of transducers starting from their fundamentals to various applications. It will also guide students to select the suitable type of transducer for a desired application based on their performance characteristics. To provide maximum topical coverage, the contents are carefully covered by considering the curriculum and syllabi of almost all universities throughout India. Every chapter starts with a brief introduction and ends with a detailed summary. At the end of chapters, good number of solved problems (wherever necessary) are also elaborately discussed in this book. Besides this, the book is profusely illustrated with schematic diagrams. This student-friendly approach will definitely be helpful for the students to learn and realize the topics in a comprehensible manner. The book with incisive explanations and all the pedagogic attributes is designed to serve the needs of the undergraduate students of Applied Electronics and Instrumentation Engineering, Instrumentation and Control Engineering, Electrical and Electronics Engineering and Electronics and Telecommunication Engineering.
Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.
Download or read book Handbook of Force Transducers written by Dan Mihai Stefanescu and published by Springer Science & Business Media. This book was released on 2011-03-16 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part I introduces the basic "Principles and Methods of Force Measurement" according to a classification into a dozen of force transducers types: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the "(Strain Gauge) Force Transducers Components", evolving from the classical force transducer to the digital / intelligent one, with the incorporation of three subsystems (sensors, electromechanics and informatics). The elastic element (EE) is the "heart" of the force transducer and basically determines its performance. A 12-type elastic element classification is proposed (stretched / compressed column or tube, bending beam, bending and/or torsion shaft, middle bent bar with fixed ends, shear beam, bending ring, yoke or frame, diaphragm, axial-stressed torus, axisymmetrical and voluminous EE), with emphasis on the optimum location of the strain gauges. The main properties of the associated Wheatstone bridge, best suited for the parametrical transducers, are examined, together with the appropriate electronic circuits for SGFTs. The handbook fills a gap in the field of Force Measurement, both experts and newcomers, no matter of their particular interest, finding a lot of useful and valuable subjects in the area of Force Transducers; in fact, it is the first specialized monograph in this inter- and multidisciplinary field.
Download or read book Piezo Electric Electro Acoustic Transducers written by Valeriy Sharapov and published by Springer Science & Business Media. This book was released on 2013-11-08 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electroacoustic transducers (EAT) are devices, which transform electric energy to energy of acoustic fluctuations. Principles of action, design of transducers for work in air and water as well as for non-destructive control are described in the book. New technologies of designing EAT, not only expanding designing possibilities, are described. They also allow to create transducers with improved characteristics. In particular, methods to increase target capacity (sound pressure), decrease working (resonant) frequency of transducers and expand frequencies of projectors and sound receivers are developed. Methods and control units of transducers in batch production of transducers are described, too.
Download or read book Handbook of Research on Nanoelectronic Sensor Modeling and Applications written by Ahmadi, Mohammad Taghi and published by IGI Global. This book was released on 2016-09-20 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoelectronics are a diverse set of materials and devices that are so small that quantum mechanics need to be applied to their function. The possibilities these devices present outweigh the difficulties associated with their development, as biosensors and similar devices have the potential to vastly improve our technological reach. The Handbook of Research on Nanoelectronic Sensor Modeling and Applications begins with an introduction of the fundamental concepts of nanoelectronic sensors, then proceeds to outline in great detail the concepts of nanoscale device modeling and nanoquantum fundamentals. Recent advances in the field such as graphene technology are discussed at length in this comprehensive handbook, ideal for electrical engineers, advanced engineering students, researchers, and academics.
Download or read book Advances in Sensors Reviews Vol 3 written by Sergey Yurish and published by Lulu.com. This book was released on 2016-04-25 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sensors, Transducers, Signal Conditioning and Wireless (Book Series 'Advances in Sensors: Reviews', Vol. 3) is a premier sensor review source and contains 19 chapters with sensor related state-of-the-art reviews and descriptions of latest achievements written by 55 authors from academia and industry from 19 countries: Botswana, Canada, China, Finland, France, Germany, India, Jordan, Mexico, Portugal, Romania, Russia, Senegal, Serbia, South Africa, South Korea, UK, Ukraine and USA. Coverage includes current developments in physical sensors and transducers, chemical sensors, biosensors, sensing materials, signal conditioning energy harvesters and wireless sensor networks. This book ensures that readers will stay at the cutting edge of the field and get the right and effective start point and road map for the further researches and developments.
Download or read book Electromechanical Sensors and Actuators written by Ilene J. Busch-Vishniac and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike other treatments of sensors or actuators, this book approaches the devices from the point of view of the fundamental coupling mechanism between the electrical and mechanical behaviour. The principles of operation of the solenoid are the same in both cases, and this book thus treats them together. It begins with a discussion of systems analysis as a tool for modelling transducers, before turning to a detailed discussion of transduction mechanisms. The whole is rounded off by an input/output analysis of transducers.
