Download or read book Electrical Machines written by S. K. Sahdev and published by Cambridge University Press. This book was released on 2017-11-24 with total page 979 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers key concepts of electrical machines embedded with solved examples, review questions, illustrations and open book questions.

Download or read book Electrical Machines and Drives written by Jan A. Melkebeek and published by Springer. This book was released on 2018-01-20 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to offer a thorough study and reference textbook on electrical machines and drives. The basic idea is to start from the pure electromagnetic principles to derive the equivalent circuits and steady-state equations of the most common electrical machines (in the first parts). Although the book mainly concentrates on rotating field machines, the first two chapters are devoted to transformers and DC commutator machines. The chapter on transformers is included as an introduction to induction and synchronous machines, their electromagnetics and equivalent circuits. Chapters three and four offer an in-depth study of induction and synchronous machines, respectively. Starting from their electromagnetics, steady-state equations and equivalent circuits are derived, from which their basic properties can be deduced. The second part discusses the main power-electronic supplies for electrical drives, for example rectifiers, choppers, cycloconverters and inverters. Much attention is paid to PWM techniques for inverters and the resulting harmonic content in the output waveform. In the third part, electrical drives are discussed, combining the traditional (rotating field and DC commutator) electrical machines treated in the first part and the power electronics of part two. Field orientation of induction and synchronous machines are discussed in detail, as well as direct torque control. In addition, also switched reluctance machines and stepping motors are discussed in the last chapters. Finally, part 4 is devoted to the dynamics of traditional electrical machines. Also for the dynamics of induction and synchronous machine drives, the electromagnetics are used as the starting point to derive the dynamic models. Throughout part 4, much attention is paid to the derivation of analytical models. But, of course, the basic dynamic properties and probable causes of instability of induction and synchronous machine drives are discussed in detail as well, with the derived models for stability in the small as starting point. In addition to the study of the stability in the small, a chapter is devoted to large-scale dynamics as well (e.g. sudden short-circuit of synchronous machines). The textbook is used as the course text for the Bachelor’s and Master’s programme in electrical and mechanical engineering at the Faculty of Engineering and Architecture of Ghent University. Parts 1 and 2 are taught in the basic course ’Fundamentals of Electric Drives’ in the third bachelor. Part 3 is used for the course ’Controlled Electrical Drives’ in the first master, while Part 4 is used in the specialised master on electrical energy.

Download or read book Electrical Machines I written by Uday A. Bakshi and published by Technical Publications. This book was released on 2020-11-01 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of various electrical machines is well known in the various engineering fields. The book provides comprehensive coverage of the magnetic circuits, magnetic materials, single and three phase transformers and d.c. machines. The book is structured to cover the key aspects of the course Electrical Machines - I. The book starts with the explanation of basics of magnetic circuits, concepts of self and mutual inductances and important magnetic materials. Then it explains the fundamentals of single phase transformers including the construction, phasor diagram, equivalent circuit, losses, efficiency, methods of cooling, parallel operation and autotransformer. The chapter on three phase transformer provides the detailed discussion of construction, connections, phasor groups, parallel operation, tap changing transformer and three winding transformer. The various testing methods of transformers are also incorporated in the book. The book further explains the concept of electromechanical energy conversion including the discussion of singly and multiple excited systems. Then the book covers all the details of d.c. generators including construction, armature reaction, commutation, characteristics, parallel operation and applications. The book also includes the details of d.c. motors such as characteristics, types of starters, speed control methods, electric braking and permanent magnet d.c. motors. Finally, the book covers the various testing methods of d.c. machines including Swinburne's test, brake test, retardation test and Hopkinson's test. The book uses plain, lucid language to explain each topic. The book provides the logical method of explaining the various complicated topics and stepwise methods to make the understanding easy. Each chapter is well supported with necessary illustrations, self-explanatory diagrams and variety of solved problems. All the chapters are arranged in a proper sequence that permits each topic to build upon earlier studies. The book explains the philosophy of the subject which makes the understanding of the concepts very clear and makes the subject more interesting.

Download or read book Electrical Machines written by Slobodan N. Vukosavic and published by Springer Science & Business Media. This book was released on 2012-10-26 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Machines primarily covers the basic functionality and the role of electrical machines in their typical applications. The effort of applying coordinate transforms is justified by obtaining a more intuitive, concise and easy-to-use model. In this textbook, mathematics is reduced to a necessary minimum, and priority is given to bringing up the system view and explaining the use and external characteristics of machines on their electrical and mechanical ports. Covering the most relevant concepts relating to machine size, torque and power, the author explains the losses and secondary effects, outlining cases and conditions in which some secondary phenomena are neglected. While the goal of developing and using machine mathematical models, equivalent circuits and mechanical characteristics persists through the book, the focus is kept on physical insight of electromechanical conversion process. Details such as the slot shape and the disposition of permanent magnets and their effects on the machine parameters and performance are also covered.

Download or read book Advancements in Electric Machines written by J. F. Gieras and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, electrical machines are classi?ed into d. c. commutator (brushed) machines, induction (asynchronous) machines and synchronous machines. These three types of electrical machines are still regarded in many academic curricula as fundamental types, despite that d. c. brushed machines (except small machines) have been gradually abandoned and PM brushless machines (PMBM) and switched reluctance machines (SRM) have been in mass p- duction and use for at least two decades. Recently, new topologies of high torque density motors, high speed motors, integrated motor drives and special motors have been developed. Progress in electric machines technology is stimulated by new materials, new areas of applications, impact of power electronics, need for energy saving and new technological challenges. The development of electric machines in the next few years will mostly be stimulated by computer hardware, residential and public applications and transportation systems (land, sea and air). At many Universities teaching and research strategy oriented towards el- trical machinery is not up to date and has not been changed in some co- tries almost since the end of the WWII. In spite of many excellent academic research achievements, the academia–industry collaboration and technology transfer are underestimated or, quite often, neglected. Underestimation of the role of industry, unfamiliarity with new trends and restraint from technology transfer results, with time, in lack of external ?nancial support and drastic - cline in the number of students interested in Power Electrical Engineering.

Download or read book Electrical Machines Drives and Power Systems written by Theodore Wildi and published by Pearson Educación. This book was released on 2006 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: The HVDC Light[trademark] method of transmitting electric power. Introduces students to an important new way of carrying power to remote locations. Revised, reformatted Instructor's Manual. Provides instructors with a tool that is much easier to read. Clear, practical approach.

Download or read book Design of Rotating Electrical Machines written by Juha Pyrhonen and published by John Wiley & Sons. This book was released on 2013-09-26 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: In one complete volume, this essential reference presents an in-depth overview of the theoretical principles and techniques of electrical machine design. This timely new edition offers up-to-date theory and guidelines for the design of electrical machines, taking into account recent advances in permanent magnet machines as well as synchronous reluctance machines. New coverage includes: Brand new material on the ecological impact of the motors, covering the eco-design principles of rotating electrical machines An expanded section on the design of permanent magnet synchronous machines, now reporting on the design of tooth-coil, high-torque permanent magnet machines and their properties Large updates and new material on synchronous reluctance machines, air-gap inductance, losses in and resistivity of permanent magnets (PM), operating point of loaded PM circuit, PM machine design, and minimizing the losses in electrical machines> End-of-chapter exercises and new direct design examples with methods and solutions to real design problems> A supplementary website hosts two machine design examples created with MATHCAD: rotor surface magnet permanent magnet machine and squirrel cage induction machine calculations. Also a MATLAB code for optimizing the design of an induction motor is provided Outlining a step-by-step sequence of machine design, this book enables electrical machine designers to design rotating electrical machines. With a thorough treatment of all existing and emerging technologies in the field, it is a useful manual for professionals working in the diagnosis of electrical machines and drives. A rigorous introduction to the theoretical principles and techniques makes the book invaluable to senior electrical engineering students, postgraduates, researchers and university lecturers involved in electrical drives technology and electromechanical energy conversion.

Download or read book Principles of Electric Machines and Power Electronics written by P. C. Sen and published by . This book was released on 1989-01-17 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: An accessible introduction to all important aspects of electric machines, covering dc, induction, and synchronous machines. Also addresses modern techniques of control, power electronics, and applications. Exposition builds from first principles, making this book accessible to a wide audience. Contains a large number of problems and worked examples.

Download or read book Numerical Modelling and Design of Electrical Machines and Devices written by Kay Hameyer and published by WIT Press. This book was released on 1999-05-21 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an overview of numerical field computational methods and, in particular, of the finite element method (FEM) in magnetics. Detailed attention is paid to the practical use of the FEM in designing electromagnetic devices such as motors, transformers and actuators. Based on the authors' extensive experience of teaching numerical techniques to students and design engineers, the book is ideal for use as a text at undergraduate and graduate level, or as a primer for practising engineers who wish to learn the fundamentals and immediately apply these to actual design problems. Contents: Introduction; Computer Aided Design in Magnetics; Electromagnetic Fields; Potentials and Formulations; Field Computation and Numerical Techniques; Coupled Field Problems; Numerical Optimisation; Linear System Equation Solvers; Modelling of Electrostatic and Magnetic Devices; Examples of Computed Models.

Download or read book Basic Electric Machines written by Vincent Del Toro and published by . This book was released on 1990 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: For core courses in Electric Machinery. Focuses on all aspects of steady-state performance, control and applications. (vs. Fitzgerald, Chapman, Nasar, Lindsay/Rashid).

Download or read book Electrical Machines written by Charles Seymour Siskind and published by McGraw-Hill/Glencoe. This book was released on 1959 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Machines written by Dr. Hidaia Mahmood Alassouli and published by Dr. Hidaia Mahmood Alassouli. This book was released on 2020-04-01 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes my lecture notes for electrical machines course. The book is divided to different learning parts · Part 1- Apply basic physical concepts to explain the operation and solve problems related to electrical machines. · Part 2- Explain the principles underlying the performance of three-phase electrical machines. · Part 3- Analyse, operate and test three-phase induction machines. · Part 4- Investigate the performance, design, operation, and testing of the three-phase synchronous machine. Part1: Apply basic physical concepts to explain the operation and solve problems related to electrical machines. Describe the construction of simple magnetic circuits, both with and without an air gap. Explain the basic laws which govern the electrical machine operation, such as Faraday's Law, Ampere-Biot-Savart's Law, and Lenz's Law. Apply Faraday's Law of electromagnetic induction, Ampere-Biot-Savart's Law, and Lenz's Law to solve for induced voltage and currents in relation to simple magnetic circuits with movable parts. Illustrate the principle of the electromechanical energy conversion in magnetic circuits with movable parts. Part 2: Explain the principles underlying the performance of three-phase electrical machines. Compare and contrast concentric and distributed windings in three-phase electrical machines. Identify the advantages of distributed windings applied to three-phase machines. Explain how the pulsating and rotating magnetic fields are produced in distributed windings. Calculate the synchronous speed of a machine based on its number of poles and frequency of the supply. Describe the process of torque production in multi-phase machines. Part 3: Analyse, operate and test three-phase induction machines. Calculate the slip of an induction machine given the operating and synchronous speeds. Calculate and compare between different torques of a three-phase induction machine, such as the locked rotor or starting torque, pull-up torque, breakdown torque, full-load torque or braking torque. Develop and manipulate the equivalent circuit model for the three-phase induction machine. Analyse, and test experimentally, the torque-speed and current-speed characteristics of induction machines. and discuss the effects of varying such motor parameters as rotor resistance, supply voltage and supply frequency on motor torque-speed characteristics. Perform no-load and blocked rotor tests in order to determine the equivalent circuit parameters of an induction machine. Explore various techniques to start an induction motor. Identify the applications of the three-phase induction machines in industry and utility. Classify the insulations implemented in electrical machines windings and identify the factors affecting them. Part4. Investigate the performance, design, operation, and testing of the three-phase synchronous machine. Describe the construction of three-phase synchronous machines, particularly the rotor, stator windings and the rotor saliency.Develop and manipulate an equivalent circuit model for the three-phase synchronous machine. Sketch the phasor diagram of a non-salient poles synchronous machine operating at various modes operation, such as no-load operation, motor operation, and generator operation. Investigate the influence of the rotor saliency on machine performance. Perform open and short circuit tests in order to determine the equivalent circuit parameters of a synchronous machine. Identify the applications of the three-phase synchronous machines in industry and utility List and explain the conditions of parallel operation of a group of synchronous generators. Evaluate the performance of the synchronous condenser and describe the power flow control between a synchronous condenser and the utility in both modes: over and under excited. Explain the principles of controlling the output voltage and frequency of a synchronous generator.

Download or read book Electric Machines and Drives written by Ned Mohan and published by Wiley Global Education. This book was released on 2012-04-13 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a three-book series. Ned Mohan has been a leader in EES education and research for decades, as author of the best-selling text/reference Power Electronics. This book emphasizes applications of electric machines and drives that are essential for wind turbines and electric and hybrid-electric vehicles. The approach taken is unique in the following respects: A systems approach, where Electric Machines are covered in the context of the overall drives with applications that students can appreciate and get enthusiastic about; A fundamental and physics-based approach that not only teaches the analysis of electric machines and drives, but also prepares students for learning how to control them in a graduate level course; Use of the space-vector-theory that is made easy to understand. They are introduced in this book in such a way that students can appreciate their physical basis; A unique way to describe induction machines that clearly shows how they go from the motoring-mode to the generating-mode, for example in wind and electric vehicle applications, and how they ought to be controlled for the most efficient operation.

Download or read book Electrical Machines written by Satish Kumar Peddapelli and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-06-08 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Machines covers the theoretical and mathematical concepts of the most commonly used electrical machines in industry and home appliances. This book presents the practical usage and functioning of electrical machines in a way which is easily understandable by the readers. It provides a different approach from other books and presents a step by step procedure on how to start and run the machine on various load, operating, and testing conditions and connections. It also presents a complete set of readings, calculations, and graphs/plots performed on standard electrical machines with rated voltage and current. Each chapter contains answers to questions related to particular machines and testing conditions/operations, solutions to numerical problems, and some exercise problems for practice.

Download or read book Power Quality in Power Systems and Electrical Machines written by Ewald F. Fuchs and published by Academic Press. This book was released on 2015-07-14 with total page 1138 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this must-have reference covers power quality issues in four parts, including new discussions related to renewable energy systems. The first part of the book provides background on causes, effects, standards, and measurements of power quality and harmonics. Once the basics are established the authors move on to harmonic modeling of power systems, including components and apparatus (electric machines). The final part of the book is devoted to power quality mitigation approaches and devices, and the fourth part extends the analysis to power quality solutions for renewable energy systems. Throughout the book worked examples and exercises provide practical applications, and tables, charts, and graphs offer useful data for the modeling and analysis of power quality issues. Provides theoretical and practical insight into power quality problems of electric machines and systems 134 practical application (example) problems with solutions 125 problems at the end of chapters dealing with practical applications 924 references, mostly journal articles and conference papers, as well as national and international standards and guidelines

Download or read book Electrical machines written by A. V. Ivanov-Smolenskij and published by . This book was released on 1982 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrical Machines written by Turan Gönen and published by . This book was released on 1998-01-01 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: