Download or read book Electrical Hazards and Accidents written by E. K. Greenwald and published by Van Nostrand Reinhold Company. This book was released on 1991 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Safety in the Workplace written by Ray A. Jones and published by Jones & Bartlett Learning. This book was released on 2000 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: NFPA's far-reaching Electrical Safety in the Workplace teaches individuals safe work procedures and provides companies with a process for defining and implementing effective electrical safety programs. The text draws on the authors' 35 years of experience in developing corporate standards and procedures and electrical safety programs, and is up-to-date with the 1999 NEC(R) and NFPA 70E: Electrical Safety Requirements for Employee Workplaces. Chapters cover critical information about electrical hazards and hazard analysis, explain risk exposure management, and discuss NFPA codes and documents published by OSHA, NEMA, UL, and ANSI. Concepts applicable to both commercial and industrial activities include: persuasive statistics on the benefits of electrically safe workplaces, plus proper practices such as lockout/tagout and responsibility of personnel; advice on designing and implementing electrical safety programs; real-life examples and case studies of electrical accidents; and tips on working with safety professionals and effective workplace auditing procedures.Electrical Safety in the Workplace is a must for professionals involved in construction and heavy industry, electrical contractors, and union and trade group trainers.
Download or read book Handbook of Electrical Hazards and Accidents written by Leslie A. Geddes and published by CRC Press. This book was released on 2018-01-18 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written mainly for attorneys, physicians, and investigators who are concerned with accidents associated with electric current. It is based on approximately 50 years of personal research, augmented by experience in teaching medical and biomedical engineering students and as an expert witness in litigation involving electrical injury. The material is presented in two ways: non-technically, for attorneys and physicians, and technically, for their expert witnesses and engineers. Since there is no typical electrical accident, the accidents described and the material presented in the chapters are selected to aid the reader in explaining the cause of any particular electrical accident.
Download or read book Electrical Hazards and Accidents written by E. K. Greenwald and published by John Wiley & Sons. This book was released on 1991-09-15 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to prevent electrical hazards in the workplace is the focus of this guide. It spells out proper design, maintenance, and operating procedures for minimizing the risks of electrical fires, accidents, and injuries on the job. Coverage of the latest electrical standards helps you comply with the current National Electrical Code (NEC)?? and OSHA requirements. NEC requirements and procedures are provided for grounding an electrical distribution system, selecting proper conductors, sizing the feeder, and effective branch circuit overcurrent protection. Safety considerations are explored for single and three-phase systems, fuses, plugs, and ground fault circuit interrupters (GFCIs). The guide also clarifies factors that influence soil resistivity, and it analyzes correction factors for special situations such as high ambient temperature environments. Human responses to electric shock are covered in detail. Among the important areas addressed are the approximate electrical impedance of the human body, thresholds of shock perception, let-go currents, asphyxia, ventricular fibrillation, and respiratory arrest. A bounty of solutions to help you solve electrical safety problems related to: * Hazardous locations -- Find out how to assess potential ignition sources, ventilation requirements, surface temperature conditions, and conduit and cable sealing requirements. * Current-carrying conductors in fire environments -- See how to evaluate insulation behavior, conductor melting temperatures, and the effects of nicks and broken strands, as well as how to make investigations at the scene of a fire. * Lightning protection -- Equip yourself to determine the probability of lightning strikes in specific locations, and mitigate the effects of a direct strike on buildings, equipment, and personnel. How to provide voltage surge protection is also discussed. * Static electricity -- Learn about the fundamentals of electrical charge induction and mechanisms for static charge ignition. Numerous case histories provide valuable insights into accident provention. In addition, the guide provides a review of electricity basics ranging from definitions of terms to the physics of the electric arc. It provides full-scope coverage of all electrical safety issues in the workplace. Electrical Hazards and Accidents: Their Cause and Prevention is an essential source for facility engineers, electrical engineers, plant engineers, plant managers, electricians, regulatory managers, and accident and insurance investigators.
Download or read book Occupational Injuries From Electrical Shock and Arc Flash Events written by Richard B. Campbell and published by Springer. This book was released on 2016-09-02 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This brief presents information on occupational injuries from electric shock and arc flash events through a review of literature, electrical incident data, and similar sources. It includes pertinent information such as the nature of the incident, adherence to safety requirements, use of appropriate personal protective equipment (PPE), and extent of injury. Chapters address arc flash and shock hazards, and the need for empirical incident data on the actual hazards that may be experienced when equipment faults or adverse electrical events occur. Certain tasks where the risk of an arc flash or shock hazard may be lower, such as normal operation of properly installed and maintained equipment, may not require the use of any special PPE. Some of this risk reduction is based on anecdotal data, and the brief details why future research challenges will need more empirical incident data on the actual hazards and associated injuries that may be experienced when equipment faults or adverse electrical events occur. Designed for professionals and researchers in fire protection engineering, workplace electrical tasks, or workplace safety, this brief offers a thorough overview of the trends in electrical injuries and the costs related to those injuries.
Download or read book Electrical Safety Handbook 3E written by John Cadick and published by McGraw Hill Professional. This book was released on 2005-10-19 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an accident-avoiding prescription for electricians, safety managers, and inspectors, and engineers dealing with electricity any voltage level. Presenting crucial protective safety strategies for industrial and commercial systems, the Handbook references all major safety codes (OSHA, NEC, NESC, and NFPA) where appropriate, creating a unique, one-stop compliance manual for any company’s electrical safety training and reference needs.
Download or read book Controlling Electrical Hazards written by United States. Occupational Safety and Health Administration and published by . This book was released on 1997 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Electrical Code written by National Fire Protection Association and published by Singular. This book was released on 1998 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the latest electrical regulation code that is applicable for electrical wiring and equipment installation for all buildings, covering emergency situations, owner liability, and procedures for ensuring public and workplace safety.
Download or read book Electrical Safety Safety and Health for Electrical Trades written by Thaddeus W. Fowler and published by DIANE Publishing. This book was released on 2010 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This student manual, developed by NIOSH, is part of a safety and health curriculum for secondary and post-secondary electrical trades courses. It is designed to engage the learner in recognizing, evaluating, and controlling hazards associated with electrical work. It was developed through extensive research with vocational instructors. Chapters: Electricity is Dangerous; Dangers of Electrical Shock; Burns Caused by Electricity (includes First Aid Fact Sheet); Overview of the Safety Model; Recognizing Hazards; Evaluating Hazards; Controlling Hazards: Safe Work Environment; and Controlling Hazards: Safe Work Practices. Glossary of Terms. Illustrations.
Download or read book Electrical Safety Code Manual written by Kimberley Keller and published by Butterworth-Heinemann. This book was released on 2010-07-19 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in any workplace is extremely important. In the case of the electrical industry, safety is critical and the codes and regulations which determine safe practices are both diverse and complicated. Employers, electricians, electrical system designers, inspectors, engineers and architects must comply with safety standards listed in the National Electrical Code, OSHA and NFPA 70E. Unfortunately, the publications which list these safety requirements are written in very technically advanced terms and the average person has an extremely difficult time understanding exactly what they need to do to ensure safe installations and working environments. Electrical Safety Code Manual will tie together the various regulations and practices for electrical safety and translate these complicated standards into easy to understand terms. This will result in a publication that is a practical, if not essential, asset to not only designers and company owners but to the electricians who must put compliance requirements into action in the field. - Best-practice methods for accident prevention and electrical hazard avoidance - Current safety regulations, including new standards from OSHA, NEC, NESC, and NFPA - Information on low-, medium-, and high-voltage safety systems - Step-by-step guidelines on safety audits - Training program how-to's, from setup to rescue and first aid procedures
Download or read book Knowledge Solutions written by Olivier Serrat and published by Springer. This book was released on 2017-05-22 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY-NC 3.0 IGO license. This book comprehensively covers topics in knowledge management and competence in strategy development, management techniques, collaboration mechanisms, knowledge sharing and learning, as well as knowledge capture and storage. Presented in accessible “chunks,” it includes more than 120 topics that are essential to high-performance organizations. The extensive use of quotes by respected experts juxtaposed with relevant research to counterpoint or lend weight to key concepts; “cheat sheets” that simplify access and reference to individual articles; as well as the grouping of many of these topics under recurrent themes make this book unique. In addition, it provides scalable tried-and-tested tools, method and approaches for improved organizational effectiveness. The research included is particularly useful to knowledge workers engaged in executive leadership; research, analysis and advice; and corporate management and administration. It is a valuable resource for those working in the public, private and third sectors, both in industrialized and developing countries.
Download or read book Emergency Medical Services written by Jane H. Brice and published by John Wiley & Sons. This book was released on 2021-08-12 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume Emergency Medical Services: Clinical Practice and Systems Oversight delivers a thorough foundation upon which to succeed as an EMS medical director and prepare for the NAEMSP National EMS Medical Directors Course and Practicum. Focusing on EMS in the 'real world', the book offers specific management tools that will be useful in the reader's own local EMS system and provides contextual understanding of how EMS functions within the broader emergency care system at a state, local, and national level. The two volumes offer the core knowledge trainees will need to successfully complete their training and begin their career as EMS physicians, regardless of the EMS systems in use in their areas. A companion website rounds out the book's offerings with audio and video clips of EMS best practice in action. Readers will also benefit from the inclusion of: A thorough introduction to the history of EMS An exploration of EMS airway management, including procedures and challenges, as well as how to manage ventilation, oxygenation, and breathing in patients, including cases of respiratory distress Practical discussions of medical problems, including the challenges posed by the undifferentiated patient, altered mental status, cardiac arrest and dysrhythmias, seizures, stroke, and allergic reactions An examination of EMS systems, structure, and leadership
Download or read book Memorandum of Guidance on the Electricity at Work Regulations 1989 written by and published by . This book was released on 2007 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents references to the Institution of Electrical Engineers' IEE Regulations with BS7671. This book is relevant to various work activities and premises except mines and quarries, certain offshore installations and certain ships. It is suitable for engineers, technicians and their managers.
Download or read book Electrical Safety of Low Voltage Systems written by Massimo Mitolo and published by McGraw-Hill Education. This book was released on 2009-06-26 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Find all the information you need to minimize accident rates and ensurelow-voltage system safety Electrical Safety of Low-Voltage Systems offers you a comprehensive safety regimen, based on thefundamental characteristics of low-voltage electrical systems.Fully explaining the grounding and bonding of low-voltage systemsas they relate to article 250 of the National ElectricalCode®, this essential safety tool provides an analytical approachto accident control to replace the haphazard rules of thumb currentlyin use.
Download or read book Electrical Safety Handbook 4th Edition written by John Cadick and published by McGraw Hill Professional. This book was released on 2012-02-06 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: UP-TO-DATE, ON-THE-JOB ELECTRICAL SAFETY ESSENTIALS Covering every major electrical standard, including NEC, NESC, NFPA, 70E, IEEE 1584, and OSHA, Electrical Safety Handbook, Fourth Edition is a practical, illustrated source of life-saving information designed for specific work environments. This must-have guide provides the most current safety strategies for use in industrial, commercial, and home-office electrical systems in an easy-to-use format. Written by experts in electrical operations, maintenance, engineering, construction, and safety, this fully revised edition delivers complete details on: Hazards of electricity Basic physics of electrical hazards Electrical safety equipment Safety procedures and methods Grounding and bonding of electrical systems and equipment Electrical maintenance and its relationship to safety Regulatory and legal safety requirements and standards Accident prevention, accident investigation, rescue, and first aid Low-voltage safety Medium- and high-voltage safety Human factors in electrical safety Safety management and organizational structure Safety training methods and systems
Download or read book Building Maintenance Construction written by Clifford Rutherford and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electricity at Work written by Great Britain. Health and Safety Executive and published by HSG. This book was released on 2013 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
