Download or read book AC Electrical Circuits written by James Fiore and published by . This book was released on 2018-07-23 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for both students and teachers alike, this AC Electrical Circuits Workbook contains over 500 problems spread across ten chapters. Each chapter begins with an overview of the relevant theory and includes exercises focused on specific kinds of circuit problems such as Analysis, Design, Challenge and Computer Simulation. An Appendix offers the answers to the odd-numbered Analysis and Design exercises. Chapter topics include series, parallel, and series-parallel RLC circuits; analysis techniques such as superposition, source conversions, mesh analysis, nodal analysis, Thévenin's and Norton's theorems, and delta-wye conversions; plus series and parallel resonance, dependent sources, polyphase power, magnetic circuits, and more. This is the print version of the on-line OER.
Download or read book Circuit Analysis Laboratory Workbook written by Teri L. Piatt and published by Morgan & Claypool Publishers. This book was released on 2017-06-15 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This workbook integrates theory with the concept of engineering design and teaches troubleshooting and analytical problem-solving skills. It is intended to either accompany or follow a first circuits course, and it assumes no previous experience with breadboarding or other lab equipment. This workbook uses only those components that are traditionally covered in a first circuits course (e.g., voltage sources, resistors, potentiometers, capacitors, and op amps) and gives students clear design goals, requirements, and constraints. Because we are using only components students have already learned how to analyze, they are able to tackle the design exercises, first working through the theory and math, then drawing and simulating their designs, and finally building and testing their designs on a breadboard.
Download or read book Basic Electronics Engineering written by Satya Sai Srikant and published by Springer Nature. This book was released on 2020-04-27 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is primarily designed to serve as a textbook for undergraduate students of electrical, electronics, and computer engineering, but can also be used for primer courses across other disciplines of engineering and related sciences. The book covers all the basic aspects of electronics engineering, from electronic materials to devices, and then to basic electronic circuits. The book can be used for freshman (first year) and sophomore (second year) courses in undergraduate engineering. It can also be used as a supplement or primer for more advanced courses in electronic circuit design. The book uses a simple narrative style, thus simplifying both classroom use and self study. Numerical values of dimensions of the devices, as well as of data in figures and graphs have been provided to give a real world feel to the device parameters. It includes a large number of numerical problems and solved examples, to enable students to practice. A laboratory manual is included as a supplement with the textbook material for practicals related to the coursework. The contents of this book will be useful also for students and enthusiasts interested in learning about basic electronics without the benefit of formal coursework.
Download or read book ELECTRONICS LAB MANUAL VOLUME 2 written by NAVAS, K. A. and published by PHI Learning Pvt. Ltd.. This book was released on 2018-10-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is evolved from the experience of the author who taught all lab courses in his three decades of teaching in various universities in India. The objective of this lab manual is to provide information to undergraduate students to practice experiments in electronics laboratories. This book covers 118 experiments for linear/analog integrated circuits lab, communication engineering lab, power electronics lab, microwave lab and optical communication lab. The experiments described in this book enable the students to learn: • Various analog integrated circuits and their functions • Analog and digital communication techniques • Power electronics circuits and their functions • Microwave equipment and components • Optical communication devices This book is intended for the B.Tech students of Electronics and Communication Engineering, Electrical and Electronics Engineering, Biomedical Electronics, Instrumentation and Control, Computer Science, and Applied Electronics. It is designed not only for engineering students, but can also be used by BSc/MSc (Physics) and Diploma students. KEY FEATURES • Contains aim, components and equipment required, theory, circuit diagram, pin-outs of active devices, design, tables, graphs, alternate circuits, and troubleshooting techniques for each experiment • Includes viva voce and examination questions with their answers • Provides exposure on various devices TARGET AUDIENCE • B.Tech (Electronics and Communication Engineering, Electrical and Electronics Engineering, Biomedical Electronics, Instrumentation and Control, Computer Science, and Applied Electronics) • BSc/MSc (Physics) • Diploma (Engineering)
Download or read book Laboratory Manual for the Art of Electronics written by Paul Horowitz and published by Cambridge University Press. This book was released on 1981-08-06 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lab Manual for Biomedical Engineering Devices and Systems Third Edition written by Gary Drzewiecki and published by Cognella Academic Publishing. This book was released on 2020-08-14 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Lab Manual for Biomedical Engineering: Devices and Systems examines key concepts in biomedical systems and signals in a laboratory setting. The book gives students the opportunity to complete both measurement and math modeling exercises, thus demonstrating that the experimental real-world setting directly corresponds with classroom theory. All the experiments in the lab manual have been extensively class-tested and cover concepts such as wave math, Fourier transformation, electronic and random noise, transfer functions, and systems modeling. Each experiment builds on knowledge acquired in previous experiments, allowing the level of difficulty to increase at an appropriate pace. In completing the lab work, students enhance their understanding of the lecture course. The third edition features expanded exercises, additional sample data and measurements, and lab modifications for increased ease and simple adaptation to the online teaching and learning environment. Individual activities have also been added to aid with independent learning. Lab Manual for Biomedical Engineering is ideal for undergraduate courses in biomedical engineering comprised of students who have completed introductory electrical and mechanical physics courses. A two-semester background in calculus is recommended.
Download or read book A First Lab in Circuits and Electronics written by Yannis Tsividis and published by Jossey-Bass Publishers. This book was released on 2002 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Experiments are linked to real applications. Students are likely to be interested and excited to learn more and explore. Example of experiments linked to real applications can be seen in Experiment 2, steps 6, 7, 15, and 16; Experiment 5, steps 6 to 10 and Experiment 7, steps 12 to 20. * Self-contained background to all electronics experiments. Students will be able to follow without having taken an electronics course. Includes a self-contained introduction based on circuits only. For the instructor this provides flexibility as to when to run the lab. It can run concurrently with the first circuits analysis course. * Review background sections are provided. This convenient text feature provides an alternative point of view; helps provide a uniform background for students of different theoretical backgrounds. * A "touch-and-feel" approach helps to provide intuition and to make things "click". Rather than thinking of the lab as a set of boring procedures, students get the idea that what they are learning is real. * Encourages students to explore and to ask "what if" questions. Helps students become active learners. * Introduces students to simple design at a very early stage. Helps students see the relevance of what they are learning, and to become active learners. * Helps students become tinkerers and to experiment on their own. Students are encouraged to become creative, and their mind is opened to new possibilities. This also benefits their subsequent professional work and/or graduate study.
Download or read book Engineering Practices Lab Manual 5Th E written by T Jeyapoovan Nadar and published by Vikas Publishing House. This book was released on with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Practices Lab Manual covers all the basic engineering lab practices in the Civil, Mechanical, Electrical and Electronics areas. The manual details the various tools to be used and exercises to be practiced in the application of engineering practices in each field.
Download or read book Lab Manual for Electronics written by Martin Feldman and published by Prentice Hall. This book was released on 2001-11 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emphasis is first on understanding the characteristics of basic circuits including resistors, capacitors, diodes, and bipolar and field effect transistors. The readers then use this understanding to construct more complex circuits such as power supplies, differential amplifiers, tuned circuit amplifiers, a transistor curve tracer, and a digital voltmeter. In addition, readers are exposed to special topics of current interest, such as the propagation and detection of signals through fiber optics, the use of Van der Pauw patterns for precise linewidth measurements, and high gain amplifiers based on active loads. KEY TOPICS: Chapter topics include Thevenin's Theorem; Resistive Voltage Division; Silicon Diodes; Resistor Capacitor Circuits; Half Wave Rectifiers; DC Power Supplies; Diode Applications; Bipolar Transistors; Field Effect Transistors; Characterization of Op-Amp Circuits; Transistor Curve Tracer; Introduction to PSPICE and AC Voltage Dividers; Characterization and Design of Emitter and Source Followers; Characterization and Design of an AC Variable Gain Amplifier; Design of Test Circuits for BJT's and FET's and Design of FET Ring Oscillators; Design and Characterization of Emitter Coupled Transistor Pairs; Tuned Amplifier and Oscillator; Design of Am Radio Frequency Transmitter and Receiver; Design of Oscillators Using Op-Amps; Current Mirrors and Active Loads; Sheet Resistance; Design of Analog Fiber Optic Transmission System; Digital Voltmeter.
Download or read book DC Electrical Circuits written by James Fiore and published by . This book was released on 2017-04-21 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: An essential resource for both students and teachers alike, this DC Electrical Circuits Workbook contains over 500 problems spread across seven chapters. Each chapter begins with an overview of the relevant theory and includes exercises focused on specific kinds of circuit problems such as Analysis, Design, Challenge and Computer Simulation. An Appendix offers the answers to the odd-numbered Analysis and Design exercises. Chapter topics include fundamental for current, voltage, energy, power and resistor color code; series, parallel, and series-parallel resistive circuits using either voltage or current sources; analysis techniques such as superposition, source conversions, mesh analysis, nodal analysis, Thévenin's and Norton's theorems, and delta-wye conversions; plus dependent sources, and an introduction to capacitors and inductors. RL and RC circuits are included for DC initial and steady state response along with transient response. This is the print version of the on-line OER.
Download or read book Laboratory Manual for Electrical Machines 2 e written by D.P. Kothari and published by I K International Pvt Ltd. This book was released on 2017-11-19 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laboratory Manual for Electrical Machines (2nd) edition includes four new experiments in electrical machines so that it can cater to the complete syllabus of undergraduate laboratory courses of electrical machines. This book gives the basic information to the students with the machine phenomenon, working principles and testing methods, etc. It also imparts real physical understanding of various types of electrical machines. The main attraction of this laboratory manual is its power point presentation for all experiments. This manual is meant for electrical engineering students of B.E. and B.Tech and polytechnics.
Download or read book AC Electrical Circuit Analysis written by Mehdi Rahmani-Andebili and published by Springer Nature. This book was released on 2021-01-04 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study guide is designed for students taking courses in electrical circuit analysis. The textbook includes examples, questions, and exercises that will help electrical engineering students to review and sharpen their knowledge of the subject and enhance their performance in the classroom. Offering detailed solutions, multiple methods for solving problems, and clear explanations of concepts, this hands-on guide will improve student’s problem-solving skills and basic understanding of the topics covered in electric circuit analysis courses. Exercises cover a wide selection of basic and advanced questions and problems Categorizes and orders the problems based on difficulty level, hence suitable for both knowledgeable and under-prepared students Provides detailed and instructor-recommended solutions and methods, along with clear explanations Can be used along with the core textbooks in AC circuit analysis and advanced electrical circuit analysis
Download or read book Electrical Engineering Laboratory Manual written by Lester Elmer Beck and published by . This book was released on 1940 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrical Engineering Laboratory Manual written by Stanley Parker Smith and published by . This book was released on 1936 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Electrical Engineering I written by Don Johnson and published by Orange Grove Texts Plus. This book was released on 2009-09-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text focuses on the creation, manipulation, transmission, and reception of information by electronic means. Contents: 1) Introduction. 2) Signals and Systems. 3) Analog Signal Processing. 4) Frequency Domain. 5) Digital Signal Processing. 6) Information Communication. 7) Appendices: Decibels; Permutations and Combinations, Frequency Allocations.
Download or read book Environmental and Hydraulic Engineering Laboratory Manual written by Gang Chen and published by J. Ross Publishing. This book was released on 2017-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This laboratory manual is comprised of 14 laboratory experiments, covering topics of water quality, water treatment, groundwater hydrology, liquid static force, pipe flow, and open channel flow. These experiments are organized with a very logical flow to cover the related topics of environmental and hydraulics engineering within university-level courses. This state-of-the-art manual is divided into two sections--environmental engineering experiments and hydraulic engineering experiments--with seven experiments for each section. It provides the basic hands-on training for junior-year civil and environmental engineering students. In each experiment, fundamental theories in the topic area are revisited and mathematic equations are presented to guide practical applications of these theories. Tables, figures, graphs, and schematic illustrations are incorporated into the context to give a better understanding of concept development, experimental design, and data collection and recording. Each experiment ends with discussion topics and questions to help students better understand the content of the experiment. This manual mainly serves as a textbook for an environmental and hydraulics engineering laboratory course. Professionals and water/wastewater treatment plant managers may also find this manual of value for their daily jobs. In addition, students in related areas can use this manual as a reference and the general public may use it to educate themselves on water quality testing and water flow.
Download or read book Electricity Electronics and Control Systems for HVAC written by Thomas E. Kissell and published by Prentice Hall. This book was released on 2019-09-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Student supplement for: Electricity, Electronics, and Control Systems for HVAC, 4/e Thomas E. Kissell ISBN-10: 0131995685 ISBN-13: 9780131995680
