Download or read book Power Distribution System Reliability written by Ali Chowdhury and published by John Wiley & Sons. This book was released on 2011-04-22 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, hands-on approach to power distribution system reliability As power distribution systems age, the frequency and duration of consumer interruptions will increase significantly. Now more than ever, it is crucial for students and professionals in the electrical power industries to have a solid understanding of designing the reliable and cost-effective utility, industrial, and commercial power distribution systems needed to maintain life activities (e.g., computers, lighting, heating, cooling, etc.). This books fills the void in the literature by providing readers with everything they need to know to make the best design decisions for new and existing power distribution systems, as well as to make quantitative "cost vs. reliability" trade-off studies. Topical coverage includes: Engineering economics Reliability analysis of complex network configurations Designing reliability into industrial and commercial power systems Application of zone branch reliability methodology Equipment outage statistics Deterministic planning criteria Customer interruption for cost models for load-point reliability assessment Isolation and restoration procedures And much more Each chapter begins with an introduction and ends with a conclusion and a list of references for further reading. Additionally, the book contains actual utility and industrial power system design problems worked out with real examples, as well as additional problem sets and their solutions. Power Distribution System Reliability is essential reading for practicing engineers, researchers, technicians, and advanced undergraduate and graduate students in electrical power industries.

Download or read book Distribution Reliability and Power Quality written by Thomas Allen Short and published by CRC Press. This book was released on 2018-10-08 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power distribution and quality remain the key challenges facing the electrical utilities industry. Technology alone cannot provide a solution to power quality problems, and there exists a variety of procedures and programs that can be put in place to ensure reliable, high quality electricity. With chapters carefully culled from the best-selling Electric Power Distribution Handbook, Distribution Reliability and Power Quality provides an economical, sharply focused reference for engineers and technicians working in this specialty area of power distribution. The book introduces the concept of reliability, outlining various methods of assessing and improving reliability along with the factors that affect it. It follows with a detailed look at voltage sags and momentary interruptions, various solutions to these issues, power quality monitoring, and other quality issues such as voltage unbalance and harmonics. Because faults are the cause of many interruptions and other power quality problems, the author devotes a detailed chapter to various aspects of faults. Focused on enhancing the delivery of high-quality power, this volume includes a new chapter on reliability and power quality improvement programs that provide a roadmap to better performance and ultimately to higher efficiency. Presenting a host of practical solutions for reliability and power quality specialists, Distribution Reliability and Power Quality gathers critical tools, techniques, and knowledge into a single source that is ideally suited for immediate implementation.

Download or read book Electric Power Distribution Reliability written by Richard E. Brown and published by CRC Press. This book was released on 2002-03-06 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Balancing theory, practical knowledge, and real-world applications, this reference consolidates all pertinent topics related to power distribution reliability into one comprehensive volume. Exploring pressing issues in creating and analyzing reliability models, the author highlights the most effective techniques to achieve maximum performance at lowest cost. With over 300 tables, figures, and equations, the book discusses service interruptions caused by equipment malfunction, animals, trees, severe weather, natural disasters, and human error and evaluates strategies to improve reliability and quantifies their impact by incorporating them into component and system models.

Download or read book Electric Power Distribution Equipment and Systems written by Thomas Allen Short and published by CRC Press. This book was released on 2018-10-03 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power distribution and quality remain the key challenges facing the electric utilities industry. Choosing the right equipment and architecture for a given application means the difference between success and failure. Comprising chapters carefully selected from the best-selling Electric Power Distribution Handbook, Electric Power Distribution Equipment and Systems provides an economical, sharply focused reference on the technologies and infrastructures that enable reliable, efficient distribution of power, from traversing vast distances to local power delivery. The book works inward from broad coverage of overall power systems all the way down to specific equipment application. It begins by laying a foundation in the fundamentals of distribution systems, explaining configurations, substations, loads, and differences between European and US systems. It also includes a look at the development of the field as well as future problems and challenges to overcome. Building on this groundwork, the author elaborates on both overhead and underground distribution networks, including the underlying concepts and practical issues associated with each. Probing deeper into the system, individual chapters explore transformers, voltage regulation, and capacitor application in detail, from basic principles to operational considerations. With clear explanations and detailed information, Electric Power Distribution Equipment and Systems gathers critical concepts, technologies, and applications into a single source that is ideally suited for immediate implementation.

Download or read book Electric Power Grid Reliability Evaluation written by Chanan Singh and published by John Wiley & Sons. This book was released on 2018-12-11 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The groundbreaking book that details the fundamentals of reliability modeling and evaluation and introduces new and future technologies Electric Power Grid Reliability Evaluation deals with the effective evaluation of the electric power grid and explores the role that this process plays in the planning and designing of the expansion of the power grid. The book is a guide to the theoretical approaches and processes that underpin the electric power grid and reviews the most current and emerging technologies designed to ensure reliability. The authors—noted experts in the field—also present the algorithms that have been developed for analyzing the soundness of the power grid. A comprehensive resource, the book covers probability theory, stochastic processes, and a frequency-based approach in order to provide a theoretical foundation for reliability analysis. Throughout the book, the concepts presented are explained with illustrative examples that connect with power systems. The authors cover generation adequacy methods, and multi-node analysis which includes both multi-area as well as composite power system reliable evaluation. This important book: • Provides a guide to the basic methods of reliability modeling and evaluation • Contains a helpful review of the background of power system reliability evaluation • Includes information on new technology sources that have the potential to create a more reliable power grid • Addresses renewable energy sources and shows how they affect power outages and blackouts that pose new challenges to the power grid system Written for engineering students and professionals, Electric Power Grid Reliability Evaluation is an essential book that explores the processes and algorithms for creating a sound and reliable power grid.

Download or read book Reliability Assessment of Large Electric Power Systems written by Roy Billinton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are very pleased to be asked to co-author this book for a variety of reasons, one of which was that it gave us further opportunity to work together. The scope proposed was very wide with the only significant proviso being that the book should be in a mongraph-style and not a teaching text. This require ment has given us the opportunity to compile a wide range of relevant material relating to present-day knowledge and application in power system reliability. As many readers will be aware, we have collaborated in many ways over a relatively long period and have co-authored two other books on reliability evaluation. Both of these previous books were structured as teaching texts. This present book is not a discourse on "how to do reliability evaluation" but a discussion on "why it should be done and what can be done and achieved" and as such does not replace or conflict with the previous books. The three books are complementary and each enhances the others. The material contained in this book is not specifically original since it is based on information which we have published in other forms either jointly or as co authors with various other people, particularly our many research students. We sincerely acknowledge the important contributions made by all these students and colleagues. There are too many to mention individually in this preface but their names appear frequently in the references at the end of each chapter.

Download or read book Electric Power Distribution Handbook written by Thomas Allen Short and published by CRC Press. This book was released on 2018-09-03 with total page 900 pages. Available in PDF, EPUB and Kindle. Book excerpt: Of the "big three" components of electrical infrastructure, distribution typically gets the least attention. In fact, a thorough, up-to-date treatment of the subject hasn’t been published in years, yet deregulation and technical changes have increased the need for better information. Filling this void, the Electric Power Distribution Handbook delivers comprehensive, cutting-edge coverage of the electrical aspects of power distribution systems. The first few chapters of this pragmatic guidebook focus on equipment-oriented information and applications such as choosing transformer connections, sizing and placing capacitors, and setting regulators. The middle portion discusses reliability and power quality, while the end tackles lightning protection, grounding, and safety. The Second Edition of this CHOICE Award winner features: 1 new chapter on overhead line performance and 14 fully revised chapters incorporating updates from several EPRI projects New sections on voltage optimization, arc flash, and contact voltage Full-color illustrations throughout, plus fresh bibliographic references, tables, graphs, methods, and statistics Updates on conductor burndown, fault location, reliability programs, tree contacts, automation, and grounding and personnel protection Access to an author-maintained support website, distributionhandbook.com, with problems sets, resources, and online apps An unparalleled source of tips and solutions for improving performance, the Electric Power Distribution Handbook, Second Edition provides power and utility engineers with the technical information and practical tools they need to understand the applied science of distribution.

Download or read book Electric Power Distribution Reliability written by Richard E. Brown and published by CRC Press. This book was released on 2017-12-19 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its high impact on the cost of electricity and its direct correlation with customer satisfaction, distribution reliability continues to be one of the most important topics in the electric power industry. Continuing in the unique tradition of the bestselling first edition, Electric Power Distribution Reliability, Second Edition consolidates all pertinent topics on electric power distribution into one comprehensive volume balancing theory, practical knowledge, and real world applications. Updated and expanded with new information on benchmarking, system hardening, underground conversion, and aging infrastructure, this timely reference enables you to— · Manage aging infrastructure · Harden electric power distribution systems · Avoid common benchmarking pitfalls · Apply effective risk management The electric power industry will continue to make distribution system reliability and customer-level reliability a top priority. Presenting a wealth of useful knowledge, Electric Power Distribution Reliability, Second Edition remains the only book that is completely dedicated to this important topic.

Download or read book Reliability Assessment of Electric Power Systems Using Monte Carlo Methods written by Billinton and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of quantitative reliability evaluation in electric power sys tems has now evolved to the point at which most utilities use these techniques in one or more areas of their planning, design, and operation. Most of the techniques in use are based on analytical models and resulting analytical evaluation procedures. Improvements in and availability of high-speed digi tal computers have created the opportunity to analyze many of these prob lems using stochastic simulation methods and over the last decade there has been increased interest in and use made of Monte Carlo simulation in quantitative power system reliability assessment. Monte Carlo simulation is not a new concept and recorded applications have existed for at least 50 yr. However, localized high-speed computers with large-capacity storage have made Monte Carlo simulation an available and sometimes preferable option for many power system reliability applications. Monte Carlo simulation is also an integral part of a modern undergrad uate or graduate course on reliability evaluation of general engineering systems or specialized areas such as electric power systems. It is hoped that this textbook will help formalize the many existing applications of Monte Carlo simulation and assist in their integration in teaching programs. This book presents the basic concepts associated with Monte Carlo simulation.

Download or read book Smart Power Distribution Systems written by Qiang Yang and published by Academic Press. This book was released on 2018-10-17 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Smart Power Distribution Systems: Control, Communication, and Optimization explains how diverse technologies work to build and maintain smart grids around the globe. Yang, Yang and Li present the most recent advances in the control, communication and optimization of smart grids and provide unique insight into power system control, sensing and communication, and optimization technologies. The book covers control challenges for renewable energy and smart grids, communication in smart power systems, and optimization challenges in smart power system operations. Each area discussed focuses on the scientific innovations relating to the approaches, methods and algorithmic solutions presented. Readers will develop sound knowledge and gain insights into the integration of renewable energy generation in smart power distribution systems. - Presents the latest technological advances in electric power distribution networks, with a particular focus on methodologies, approaches and algorithms - Provides insights into the most recent research and developments from expert contributors from across the world - Presents a clear and methodical structure that guides the reader through discussion and analysis, providing unique insights and sound knowledge along the way

Download or read book Reliability Analysis for Asset Management of Electric Power Grids written by Robert Ross and published by John Wiley & Sons. This book was released on 2019-03-18 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to facilitate statistically well-founded decisions in the management of assets of an electricity grid Effective and economic electric grid asset management and incident management involve many complex decisions on inspection, maintenance, repair and replacement. This timely reference provides statistically well-founded, tried and tested analysis methodologies for improved decision making and asset management strategy for optimum grid reliability and availability. The techniques described are also sufficiently robust to apply to small data sets enabling asset managers to deal with early failures or testing with limited sample sets. The book describes the background, concepts and statistical techniques to evaluate failure distributions, probabilities, remaining lifetime, similarity and compliancy of observed data with specifications, asymptotic behavior of parameter estimators, effectiveness of network configurations and stocks of spare parts. It also shows how the graphical representation and parameter estimation from analysis of data can be made consistent, as well as explaining modern upcoming methodologies such as the Health Index and Risk Index. Key features: Offers hands-on tools and techniques for data analysis, similarity index, failure forecasting, health and risk indices and the resulting maintenance strategies. End-of-chapter problems and solutions to facilitate self-study via a book companion website. The book is essential reading for advanced undergraduate and graduate students in electrical engineering, quality engineers, utilities and industry strategists, transmission and distribution system planners, asset managers and risk managers.

Download or read book Power Distribution Planning Reference Book Second Edition written by H. Lee Willis and published by CRC Press. This book was released on 2004-03-01 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing more than twice the content of the original edition, this new edition is the premier source on the selection, development, and provision of safe, high-quality, and cost-effective electric utility distribution systems, and it promises vast improvements in system reliability and layout by spanning every aspect of system planning including load forecasting, scheduling, performance, and economics. Responding to the evolving needs of electric utilities, Power Distribution Planning Reference Book presents an abundance of real-world examples, procedural and managerial issues, and engineering and analytical methodologies that are crucial to efficient and enhanced system performance.

Download or read book Electric Power Distribution Automation Protection and Control written by James A. Momoh and published by CRC Press. This book was released on 2017-12-19 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: New methods for automation and intelligent systems applications, new trends in telecommunications, and a recent focus on renewable energy are reshaping the educational landscape of today's power engineer. Providing a modern and practical vehicle to help students navigate this dynamic terrain, Electric Power Distribution, Automation, Protection, and Control infuses new directions in computation, automation, and control into classical topics in electric power distribution. Ideal for a one-semester course for senior undergraduates or first-year graduate students, this text works systematically through basic distribution principles, renewable energy sources, computational tools and techniques, reliability, maintenance, distribution automation, and telecommunications. Numerous examples, problems, and case studies offer practical insight into the concepts and help build a working knowledge of protection schemes, fault analysis and synthesis, reliability analysis, intelligent automation systems, distribution management systems, and distribution system communications. The author details different renewable energy sources and teaches students how to evaluate them in terms of size, cost, and performance. Guided firmly by the author's wealth of industrial and academic experience, your students will learn the tools and techniques used to design, build, and operate future generations of distribution systems with unparalleled efficiency, robustness, and sustainability.

Download or read book Reliability Evaluation of Engineering Systems written by Roy Billinton and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to new developments in the field, practical teaching experience, and readers' suggestions, the authors of the warmly received Reliablity Evaluation of Engineering Systems have updated and extended the work-providing extended coverage of fault trees and a more complete examination of probability distribution, among other things-without disturbing the original's concept, structure, or style.

Download or read book Assessment of Power System Reliability written by Marko Čepin and published by Springer Science & Business Media. This book was released on 2011-07-29 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of power system reliability is demonstrated when our electricity supply is disrupted, whether it decreases the comfort of our free time at home or causes the shutdown of our companies and results in huge economic deficits. The objective of Assessment of Power System Reliability is to contribute to the improvement of power system reliability. It consists of six parts divided into twenty chapters. The first part introduces the important background issues that affect power system reliability. The second part presents the reliability methods that are used for analyses of technical systems and processes. The third part discusses power flow analysis methods, because the dynamic aspect of a power system is an important part of related reliability assessments. The fourth part explores various aspects of the reliability assessment of power systems and their parts. The fifth part covers optimization methods. The sixth part looks at the application of reliability and optimization methods. Assessment of Power System Reliability has been written in straightforward language that continues into the mathematical representation of the methods. Power engineers and developers will appreciate the emphasis on practical usage, while researchers and advanced students will benefit from the simple examples that can facilitate their understanding of the theory behind power system reliability and that outline the procedure for application of the presented methods.

Download or read book Handbook of Research on New Solutions and Technologies in Electrical Distribution Networks written by Khan, Baseem and published by IGI Global. This book was released on 2019-12-06 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the electrical industry continues to develop, one sector that still faces a range of concerns is the electrical distribution system. Excessive industrialization and inadequate billing are just a few issues that have plagued this electrical sector as it advances into the smart grid environment. Research is necessary to explore the possible solutions in fixing these problems and developing the distribution sector into an active and smart system. The Handbook of Research on New Solutions and Technologies in Electrical Distribution Networks is a collection of innovative research on the methods and applications of solving major issues within the electrical distribution system. Some issues covered within the publication include distribution losses, improper monitoring of system, renewable energy integration with micro-grid and distributed energy sources, and smart home energy management system modelling. This book is ideally designed for power engineers, electrical engineers, energy professionals, developers, technologists, policymakers, researchers, academicians, industry professionals, and students seeking current research on improving this key sector of the electrical industry.

Download or read book Terrorism and the Electric Power Delivery System written by National Research Council and published by National Academies Press. This book was released on 2012-11-25 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: The electric power delivery system that carries electricity from large central generators to customers could be severely damaged by a small number of well-informed attackers. The system is inherently vulnerable because transmission lines may span hundreds of miles, and many key facilities are unguarded. This vulnerability is exacerbated by the fact that the power grid, most of which was originally designed to meet the needs of individual vertically integrated utilities, is being used to move power between regions to support the needs of competitive markets for power generation. Primarily because of ambiguities introduced as a result of recent restricting the of the industry and cost pressures from consumers and regulators, investment to strengthen and upgrade the grid has lagged, with the result that many parts of the bulk high-voltage system are heavily stressed. Electric systems are not designed to withstand or quickly recover from damage inflicted simultaneously on multiple components. Such an attack could be carried out by knowledgeable attackers with little risk of detection or interdiction. Further well-planned and coordinated attacks by terrorists could leave the electric power system in a large region of the country at least partially disabled for a very long time. Although there are many examples of terrorist and military attacks on power systems elsewhere in the world, at the time of this study international terrorists have shown limited interest in attacking the U.S. power grid. However, that should not be a basis for complacency. Because all parts of the economy, as well as human health and welfare, depend on electricity, the results could be devastating. Terrorism and the Electric Power Delivery System focuses on measures that could make the power delivery system less vulnerable to attacks, restore power faster after an attack, and make critical services less vulnerable while the delivery of conventional electric power has been disrupted.