Download or read book Effects of Shear Stresses and Shear Strains in Ceramic Processing written by Koththavasal R. Venkatachari and published by . This book was released on 1987 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Stress Concentration on the Fracture and Deformation Characteristics of Ceramics and Metals written by Volker Weiss and published by . This book was released on 1963 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effects of non-uniform stress distributions on fracture strength were studied on four mate rials that exhibit brittle behavior; Wesgo AL995, Mykroy 750 and 1100 (ceramics) and Plexiglas (acrylic plastic). Analysis of the results of both notch tensile and bend tests on these materials indicate that fracture in ceramic materials can be explained by a maximum fracture stress concept provided that the inherent inhomogeneity of these materials is considered in the analysis. Weibull's statistical theory of fracture appears to be ap plicable to the analysis of inhomogeneity. The be havior of Plexiglas is similar to that previously observed for high strength metals. Studies of plastic flow in metallic flat notch tensile speci mens indicate that the distribution of the princi pal longitudinal strain across the notch section is related to the distribution of the longitudinal elastic stress raised to the power b, where b is primarily a function of the strain hardening ex ponent of the material. Also, Neuber's conclusion that K sub t represents the geometric mean of the true stress and true strain concentration factors in pure shear seems generally applicable to the plane stress tension case.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2005 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Symposium on High Temperature Corrosion and Materials Chemistry written by Electrochemical Society. High Temperature Materials Division and published by The Electrochemical Society. This book was released on 1998 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Processing written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2017-07-12 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials scientists continue to develop stronger, more versatile ceramics for advanced technological applications, such as electronic components, fuel cells, engines, sensors, catalysts, superconductors, and space shuttles. From the start of the fabrication process to the final fabricated microstructure, Ceramic Processing covers all aspects of modern processing for polycrystalline ceramics. Stemming from chapters in the author's bestselling text, Ceramic Processing and Sintering, this book gathers additional information selected from many sources and review articles in a single, well-researched resource. The author outlines the most commonly employed ceramic fabrication processes by the consolidation and sintering of powders. A systematic approach highlights the importance of each step as well as the interconnection between the various steps in the overall fabrication route. The in-depth treatment of production methods includes powder, colloidal, and sol-gel processing as well as chemical synthesis of powders, forming, sintering, and microstructure control. The book covers powder preparation and characterization, organic additives in ceramic processing, mixing and packing of particles, drying, and debinding. It also describes recent technologies such as the synthesis of nanoscale powders and solid freeform fabrication. Ceramic Processing provides a thorough foundation and reference in the production of ceramic materials for advanced undergraduates and graduate students as well as professionals in corporate training or professional courses.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Ceramic Processing and Sintering written by Mohamed N. Rahaman and published by CRC Press. This book was released on 2003-07-31 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field's premiere source, this reference is extensively revised and expanded to collect hard-to-find applications, equations, derivations, and examples illustrating the latest developments in ceramic processing technology. This book is concerned primarily with the processing of polycrystalline ceramics and focuses on the widespread fabrication of ceramics by the firing of consolidated powders forms. A brief treatment of sol-gel processing is also included. Ceramic Processing and Sintering, Second Edition provides clear and intensive discussions on colloidal and sol-gel processing, sintering of ceramics, and kinetic processes in materials. From powder synthesis and consolidation to sintering and densification behavior, this latest edition emphasizes the impact of each processing procedure on ceramic properties. The second edition also contains new and extended discussions on colloid stability, polymer growth and gelation, additives in ceramic forming, diffusion and defect strucutre, normal and abnormal grain growth, microwave sintering, Rayleigh instability effects, and Ostwald ripening. Illustrating the interconnectedness between the various steps in the overall fabrication route, Ceramic Processing and Sintering, Second Edition approaches the fundamental issues of each process and show how they are applied to the practical fabrication of ceramics.
Download or read book Mechanical Properties of Ceramics written by Joshua Pelleg and published by Springer Science & Business. This book was released on 2014-04-22 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the mechanical properties of ceramics and aims to provide both a solid background for undergraduate students, as well as serving as a text to bring practicing engineers up to date with the latest developments in this topic so they can use and apply these to their actual engineering work. Generally, ceramics are made by moistening a mixture of clays, casting it into desired shapes and then firing it to a high temperature, a process known as 'vitrification'. The relatively late development of metallurgy was contingent on the availability of ceramics and the know-how to mold them into the appropriate forms. Because of the characteristics of ceramics, they offer great advantages over metals in specific applications in which hardness, wear resistance and chemical stability at high temperatures are essential. Clearly, modern ceramics manufacturing has come a long way from the early clay-processing fabrication method, and the last two decades have seen the development of sophisticated techniques to produce a large variety of ceramic material. The chapters of this volume are ordered to help students with their laboratory experiments and guide their observations in parallel with lectures based on the current text. Thus, the first chapter is devoted to mechanical testing. A chapter of ductile and superplastic ceramic is added to emphasize their role in modern ceramics (chapter 2). These are followed by the theoretical basis of the subject. Various aspects of the mechanical properties are discussed in the following chapters, among them, strengthening mechanisms, time dependent and cyclic deformation of ceramics. Many practical illustrations are provided representing various observations encountered in actual ceramic-structures of particularly technical significance. A comprehensive list of references at the end of each chapter is included in this textbook to provide a broad basis for further studying the subject. The work also contains a unique chapter on a topic not discussed in other textbooks on ceramics concerning nanosized ceramics. This work will also be useful as a reference for materials scientists, not only to those who specialize in ceramics.
Download or read book Concise Encyclopedia of Advanced Ceramic Materials written by R.J. Brook and published by Elsevier. This book was released on 2012-12-02 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced ceramics cover a wide range of materials which are ceramic by nature but have been developed in response to specific requirements. This encyclopedia collects together 137 articles in order to provide an up-to-date account of the advanced ceramic field. Some articles are drawn from the acclaimed Encyclopedia of Materials Science and Engineering, often revised, and others have been newly commissioned. The Concise Encyclopedia of Advanced Ceramic Materials aims to provide a comprehensive selection of accessible articles which act as an authoritative guide to the subject. The format is designed to help the readers form opinions on a particular subject. Arranged alphabetically, with a broad subject range, the articles are diverse in character and style, thereby stimulating further discussion. Topics covered include survey articles on glass, hot pressing, insulators, powders, and many are concerned with specific chemical systems and their origins, processing and applications. The Concise Encyclopedia of Advanced Ceramic Materials will be invaluable to materials scientists, researchers, educators and industrialists working in technical ceramics.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1961 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Behavior of Crystalline Solids written by and published by . This book was released on 1963 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Principles and Practice written by Charles Newey and published by Elsevier. This book was released on 2013-10-22 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Principles and Practice deals with materials science in the technological context of making and using materials. Topics covered include the nature of materials such as crystals, an atomic view of solids, temperature effects on materials, and the mechanical and chemical properties of materials. This book is comprised of seven chapters and begins with an overview of the properties of different kinds of material, the ways in which materials can be shaped, and the uses to which they can be put. The next chapter describes the state of matter as a balance between the tendencies of atoms to stick together (by chemical bonding) or rattle apart (by thermal agitation), paying particular attention to ionic bonds and ionic crystals, the structure and properties of polymers, and transition metals. The reader is also introduced to how the structure of materials, especially microstructure, can be manipulated to give desired properties via thermal, mechanical, and chemical agents of change. This text concludes by describing the chemistry of processing and service of various materials. Exercises and self-assessment questions with answers are given at the end of each chapter, together with a set of objectives. This monograph will be a valuable resource for students of materials science and the physical sciences.
Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Search of Excellence ANTEC 91 written by Society of Plastic Engineers and published by CRC Press. This book was released on 1991-05-01 with total page 2914 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface and Colloid Chemistry in Advanced Ceramics Processing written by Robert J. Pugh and published by CRC Press. This book was released on 2017-07-12 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes the importance of surface and colloid chemistry in the manufacture of high-performance ceramics. Examines processing-property relationships, powderproductionandcharacte6zation,the dispersion properties of powders in liquids, the rheology of concentrated suspensions, and the surface and colloid chemistry aspects of the most widely used forming methods.
Download or read book Naval Research Reviews written by and published by . This book was released on 1986 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources
