Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 1970 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A TEXTBOOK OF CHEMICAL ENGINEERING THERMODYNAMICS written by K. V. NARAYANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2013-01-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as an undergraduate-level textbook in Chemical Engineering, this student-friendly, thoroughly class-room tested book, now in its second edition, continues to provide an in-depth analysis of chemical engineering thermodynamics. The book has been so organized that it gives comprehensive coverage of basic concepts and applications of the laws of thermodynamics in the initial chapters, while the later chapters focus at length on important areas of study falling under the realm of chemical thermodynamics. The reader is thus introduced to a thorough analysis of the fundamental laws of thermodynamics as well as their applications to practical situations. This is followed by a detailed discussion on relationships among thermodynamic properties and an exhaustive treatment on the thermodynamic properties of solutions. The role of phase equilibrium thermodynamics in design, analysis, and operation of chemical separation methods is also deftly dealt with. Finally, the chemical reaction equilibria are skillfully explained. Besides numerous illustrations, the book contains over 200 worked examples, over 400 exercise problems (all with answers) and several objective-type questions, which enable students to gain an in-depth understanding of the concepts and theory discussed. The book will also be a useful text for students pursuing courses in chemical engineering-related branches such as polymer engineering, petroleum engineering, and safety and environmental engineering. New to This Edition • More Example Problems and Exercise Questions in each chapter • Updated section on Vapour–Liquid Equilibrium in Chapter 8 to highlight the significance of equations of state approach • GATE Questions up to 2012 with answers
Download or read book Vapor liquid Equilibrium Data written by Shuzo Ohe and published by . This book was released on 1989 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Molecular Thermodynamics Of Electrolyte Solutions Second Edition written by Lloyd L Lee and published by World Scientific. This book was released on 2021-01-07 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrolytes and salt solutions are ubiquitous in chemical industry, biology and nature. This unique compendium introduces the elements of the solution properties of ionic mixtures. In addition, it also serves as a bridge to the modern researches into the molecular aspects of uniform and non-uniform charged systems. Notable subjects include the Debye-Hückel limit, Pitzer's formulation, Setchenov salting-out, and McMillan-Mayer scale. Two new chapters on industrial applications — natural gas treating, and absorption refrigeration, are added to make the book current and relevant.This textbook is eminently suitable for undergraduate and graduate students. For practicing engineers without a background in salt solutions, this introductory volume can also be used as a self-study.
Download or read book Computer Aided Data Book of Vapor liquid Equilibria written by Mitsuho Hirata and published by Elsevier Science & Technology. This book was released on 1975 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CO2 Hydrogenation Catalysis written by Yuichiro Himeda and published by John Wiley & Sons. This book was released on 2021-06-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to the effective catalysts and latest advances in CO2 conversion in chemicals and fuels Carbon dioxide hydrogenation is one of the most promising and economic techniques to utilize CO2 emissions to produce value-added chemicals. With contributions from an international team of experts on the topic, CO2 Hydrogenation Catalysis offers a comprehensive review of the most recent developments in the catalytic hydrogenation of carbon dioxide to formic acid/formate, methanol, methane, and C2+ products. The book explores the electroreduction of carbon dioxide and contains an overview on hydrogen production from formic acid and methanol. With a practical review of the advances and challenges in future CO2 hydrogenation research, the book provides an important guide for researchers in academia and industry working in the field of catalysis, organometallic chemistry, green and sustainable chemistry, as well as energy conversion and storage. This important book: Offers a unique review of effective catalysts and the latest advances in CO2 conversion Explores how to utilize CO2 emissions to produce value-added chemicals and fuels such as methanol, olefins, gasoline, aromatics Includes the latest research in homogeneous and heterogeneous catalysis as well as electrocatalysis Highlights advances and challenges for future investigation Written for chemists, catalytic chemists, electrochemists, chemists in industry, and chemical engineers, CO2 Hydrogenation Catalysis offers a comprehensive resource to understanding how CO2 emissions can create value-added chemicals.
Download or read book Thermodynamics for the Practicing Engineer written by Louis Theodore and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Enables you to easily advance from thermodynamics principles to applications Thermodynamics for the Practicing Engineer, as the title suggests, is written for all practicing engineers and anyone studying to become one. Its focus therefore is on applications of thermodynamics, addressing both technical and pragmatic problems in the field. Readers are provided a solid base in thermodynamics theory; however, the text is mostly dedicated to demonstrating how theory is applied to solve real-world problems. This text's four parts enable readers to easily gain a foundation in basic principles and then learn how to apply them in practice: Part One: Introduction. Sets forth the basic principles of thermodynamics, reviewing such topics as units and dimensions, conservation laws, gas laws, and the second law of thermodynamics. Part Two: Enthalpy Effects. Examines sensible, latent, chemical reaction, and mixing enthalpy effects. Part Three: Equilibrium Thermodynamics. Addresses both principles and calculations for phase, vapor-liquid, and chemical reaction equilibrium. Part Four: Other Topics. Reviews such important issues as economics, numerical methods, open-ended problems, environmental concerns, health and safety management, ethics, and exergy. Throughout the text, detailed illustrative examples demonstrate how all the principles, procedures, and equations are put into practice. Additional practice problems enable readers to solve real-world problems similar to the ones that they will encounter on the job. Readers will gain a solid working knowledge of thermodynamics principles and applications upon successful completion of this text. Moreover, they will be better prepared when approaching/addressing advanced material and more complex problems.
Download or read book Vapor Liquid Equilibria Using Unifac written by Aage Fredenslund and published by Elsevier. This book was released on 2012-12-02 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vapor-Liquid Equilibria Using UNIFAC: A Group-Contribution Method focuses on the UNIFAC group-contribution method used in predicting quantitative information on the phase equilibria during separation by estimating activity coefficients. Drawing on tested vapor-liquid equilibrium data on which UNIFAC is based, it demonstrates through examples how the method may be used in practical engineering design calculations. Divided into nine chapters, this volume begins with a discussion of vapor and liquid phase nonidealities and how they are calculated in terms of fugacity and activity coefficients, respectively. It then introduces the reader to the UNIFAC method and how it works, the procedure used in establishing the parameters needed for the model, prediction of binary and multicomponent vapor-liquid equilibria for a large number of systems, the potential of UNIFAC for predicting liquid-liquid equilibria, and how UNIFAC can be used to solve practical distillation design problems. This book will benefit process design engineers who want to reliably predict phase equilibria for designing distillation columns and other separation processes.
Download or read book Handbook of Climate Change Mitigation written by Wei-Yin Chen and published by Springer. This book was released on 2012-02-13 with total page 2130 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a mounting consensus that human behavior is changing the global climate and its consequence could be catastrophic. Reducing the 24 billion metric tons of carbon dioxide emissions from stationary and mobile sources is a gigantic task involving both technological challenges and monumental financial and societal costs. The pursuit of sustainable energy resources, environment, and economy has become a complex issue of global scale that affects the daily life of every citizen of the world. The present mitigation activities range from energy conservation, carbon-neutral energy conversions, carbon advanced combustion process that produce no greenhouse gases and that enable carbon capture and sequestion, to other advanced technologies. From its causes and impacts to its solutions, the issues surrounding climate change involve multidisciplinary science and technology. This handbook will provide a single source of this information. The book will be divided into the following sections: Scientific Evidence of Climate Change and Societal Issues, Impacts of Climate Change, Energy Conservation, Alternative Energies, Advanced Combustion, Advanced Technologies, and Education and Outreach.
Download or read book Using Aspen Plus in Thermodynamics Instruction written by Stanley I. Sandler and published by John Wiley & Sons. This book was released on 2015-04-06 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: A step-by-step guide for students (and faculty) on the use of Aspen in teaching thermodynamics • Easily-accessible modern computational techniques opening up new vistas in teaching thermodynamics A range of applications of Aspen Plus in the prediction and calculation of thermodynamic properties and phase behavior using the state-of-the art methods • Encourages students to develop engineering insight by doing repetitive calculations with changes in parameters and/or models • Calculations and application examples in a step-by-step manner designed for out-of-classroom self-study • Makes it possible to easily integrate Aspen Plus into thermodynamics courses without using in-class time • Stresses the application of thermodynamics to real problems
Download or read book Comprehensive Dissertation Index 1861 1972 Engineering chemical mechanical and metallurgical written by Xerox University Microfilms and published by . This book was released on 1973 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: - Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. - New discussion of conceptual plant design, flowsheet development and revamp design - Significantly increased coverage of capital cost estimation, process costing and economics - New chapters on equipment selection, reactor design and solids handling processes - New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography - Increased coverage of batch processing, food, pharmaceutical and biological processes - All equipment chapters in Part II revised and updated with current information - Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards - Additional worked examples and homework problems - The most complete and up to date coverage of equipment selection - 108 realistic commercial design projects from diverse industries - A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website - Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Comprehensive Dissertation Index written by and published by . This book was released on 1973 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Equilibria written by Andre Muhlbauer and published by CRC Press. This book was released on 1997-09-01 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book provides, for the first time, a thorough survey of the techniques and equipment for both high- and low-pressure phase equilibrium measurement and addresses the equally challenging task of accurately modeling or predicting the equilibria. The book is unique because it combines in depth and authoritative coverage of both experimental and theoretical procedures in a single volume. Written as a reference for practicing engineers and scientists in the chemical engineering field, this book will also be useful as an advanced graduate-level text.
Download or read book Handbook of Chemical Engineering Calculations written by Nicholas P. Chopey and published by McGraw-Hill Professional Publishing. This book was released on 1994 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of the calculation procedures needed every day on the job by chemical engineers. Tables of Contents: Physical and Chemical Properties; Stoichiometry; Phase Equilibrium; Chemical-Reaction Equilibrium; Reaction Kinetics and Reactor Design; Flow of Fluids and Solids; Heat Transfer; Distillation; Extraction and Leaching; Crystallization; Filtration; Liquid Agitation; Size Reduction; Drying: Evaporation; Environmental Engineering in the Plant. Illustrations. Index.
Download or read book The ChemSep Book written by Harry A. Kooijman and published by . This book was released on 2000 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt:
