Download or read book Effects of Microwave Processing on the Fiber matrix Interphase in Composites written by Raj K. Agrawal and published by . This book was released on 1988 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effects of Microwave Processing on Fiber matrix Adhesion in E glass Fiber Composites written by Matthew Mark Kendizorski and published by . This book was released on 1994 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials Processing Using Microwave Heating Technology written by Manoj Kumar Singh and published by Springer Nature. This book was released on with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book American Society of Composites Fourteenth International Conference Proceedings written by Amer Society Composi and published by CRC Press. This book was released on 1999-10-25 with total page 1030 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conference proceedings of the Fourteenth American Society for Composites held on the September 27-29 1999 at the Holiday Inn-1675 Conference Centre, Fairborn, Ohio.
Download or read book Microwave Processing of Materials written by and published by . This book was released on 1991 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials Processing Using Microwave Heating Technology written by Manoj Kumar Singh and published by Springer. This book was released on 2024-09-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all aspects of composite materials processing and manufacturing using microwave heating technology and their applications in various industrial processes. Depending in the processing and material used, the composites are divided into three major segments: Metal matrix composites (MMCS), ceramics composites (CMCS), and polymer matrix composites (PMCS), respectively. During the manufacturing process of these composite materials, conventional heating technologies are used in which the heat is transferred from the electrical resistance coils to the material via conventional modes of heat transfer. Issues like non-uniform temperature distribution, poor curing efficiency, generation of the in-process scarp, long process cycle, high energy consumption and cost make traditional manufacturing route a difficult choice to select. Recently, microwave-assisted heating has emerged as a promising route for the fabrication of composites as a cost-effective environmentally sustainablemanufacturing process that yields improved mechanical properties which is the main topic of this book. It looks into the mechanism, salient features, and important aspects of microwave heating and their interaction with different composites materials. It also presents other manufacturing processes of various composites using microwave heating during casting, drilling, recycling, sintering, material joining, surface engineering. This book will appeal to students, researchers and scientists working in the area of composite materials processing and manufacturing.
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Major Accomplishments in Composite Materials and Sandwich Structures written by I. M. Daniel and published by Springer Science & Business Media. This book was released on 2009-10-20 with total page 810 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book collects major research contributions in composite materials and sandwich structures supported by the U.S. Office of Naval Research. It contains over thirty chapters written by experts and serves as a reference and guide for future research.
Download or read book Interfacial Changes During the Processing of a Typical Carbon Fiber epoxy Composite Material written by Venkatesh Rao and published by . This book was released on 1991 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Primary and Secondary Manufacturing of Polymer Matrix Composites written by Kishore Debnath and published by CRC Press. This book was released on 2019-12-14 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an insight into the primary and secondary manufacturing of different class of polymer matrix composites (PMCs). The major focus is on the fabrication of a variety of PMCs with substantial coverage of various processing techniques and related advantages and limitations. The book also describes secondary manufacturing processes such as machining and joining of PMCs and provides the know-how related to developing these techniques. It discusses recently commercialized tools and techniques and highlights the opportunities provided by the design and development of newer cutting tools and machining methods. The book covers material selection guidelines, product manufacturability, product development process, and cost-estimating techniques that help readers to understand where a process fits within the overall scheme and which is appropriate for a particular component. This book provides professionals with valuable information related to composites product manufacturing as well as state-of-the-art knowledge in this field.
Download or read book Advances in Ceramic Matrix Composites written by I M Low and published by Woodhead Publishing. This book was released on 2018-01-20 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Ceramic Matrix Composites, Second Edition, delivers an innovative approach to ceramic matrix composites, focusing on the latest advances and materials developments. As advanced ceramics and composite materials are increasingly utilized as components in batteries, fuel cells, sensors, high-temperature electronics, membranes and high-end biomedical devices, and in seals, valves, implants, and high-temperature and wear components, this book explores the substantial progress in new applications. Users will gain knowledge of the latest advances in CMCs, with an update on the role of ceramics in the fabrication of Solid Oxide Fuel Cells for energy generation, and on natural fiber-reinforced eco-friendly geopolymer and cement composites. The specialized information contained in this book will be highly valuable to researchers and graduate students in ceramic science, engineering and ceramic composites technology, and engineers and scientists in the aerospace, energy, building and construction, biomedical and automotive industries. - Provides detailed coverage of parts and processing, properties and applications - Includes new developments in the field, such as natural fiber-reinforced composites and the use of CMCs in Solid Oxide Fuel Cells (SOFCs) - Presents state-of-the-art research, enabling the reader to understand the latest applications for CMCs
Download or read book Fiber Matrix Interphase Development in Carbon Carbon Composites written by G. Rellick and published by . This book was released on 1998 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt: In carbon/carbon (C/C) composites-i.e., a composite in which a carbon matrix is reinforced with carbon fiber when the matrix is derived from a thermosetting resin, we always observe a distinct, highly graphitizable, and well-oriented matrix interphase structure adjacent to the fibers. Qualitatively, the orientation of the interphase is the same as the fiber. It is important to note that thermosetting resins are non-graphitizing when heated in bulk; they form isotropic, amorphous 'glassy' carbon. The structure of this interphase becomes more prominent, i.e., more graphitic, as the heat treatment exceeds about 2200 deg C. We have postulated elsewhere that the basis for this graphite interphase development is molecular orientation induced in the degradation of the polymer matrix to carbon as a consequence of restraint of pyrolysis shrinkage at the fiber/matrix interface. More specifically, we have hypothesized that the critical factor for development of lamellar graphite (by subsequent high temperature heat treatment) in this interphase, rather than amorphous glassy carbon, is a state of multiaxial tensile deformation during pyrolysis. We have studied the structural details of the interphase region in more detail using transmission electron microscopy in conjunction with selected area (electron) diffraction (SAD). We have also examined the influence of matrix microstructure on fracture behavior by using an in situ SEM flexure stage that allowed us to follow the crack tip as it advanced through the different microstructural regions. The development of a graphitized carbon interphase can have major effects on properties. Two are discussed in this publication. The first is the effect on matrix density and associated matrix shrinkage. The other is the effect on mechanical properties.
Download or read book Ceramics and Composites Processing Methods written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2012-04-17 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the latest processing and fabrication methods There is increasing interest in the application of advanced ceramic materials in diverse areas such as transportation, energy, environmental protection and remediation, communications, health, and aerospace. This book guides readers through a broad selection of key processing techniques for ceramics and their composites, enabling them to manufacture ceramic products and components with the properties needed for various industrial applications. With chapters contributed by internationally recognized experts in the field of ceramics, the book includes traditional fabrication routes as well as new and emerging approaches in order to meet the increasing demand for more reliable ceramic materials. Ceramics and Composites Processing Methods is divided into three sections: * Densification, covering the fundamentals and practice of sintering, pulsed electric current sintering, and viscous phase silicate processing * Chemical Methods, examining colloidal methods, sol-gel, gel casting, polymer processing, chemical vapor deposition, chemical vapor infiltration, reactive melt infiltration, and combustion synthesis * Physical Methods, including directional solidification, solid free-form fabrication, microwave processing, electrophoretic deposition, and plasma spraying Each chapter focuses on a particular processing method or approach. Collectively, these chapters offer readers comprehensive, state-of-the-science information on the many approaches, techniques, and methods for the processing and fabrication of advanced ceramics and ceramic composites. With its coverage of the latest processing methods, Ceramics and Composites Processing Methods is recommended for researchers and students in ceramics, materials science, structural materials, biomedical engineering, and nanotechnology.
Download or read book Handbook of Fly Ash written by Kamal K. Kar and published by Butterworth-Heinemann. This book was released on 2021-11-07 with total page 869 pages. Available in PDF, EPUB and Kindle. Book excerpt: The drive to develop more sustainable materials has made fly ash a valuable raw material in many different applications. Comprehensive and authoritative, Handbook of Fly Ash highlights the latest research efforts to develop the properties of fly ash to maximum utility while safeguarding the environment. This book takes an interdisciplinary approach to the research into the classification and compositions of various types of fly ash, such as bottom ash and boiler slag, special classes of fly ash, and their sources around the globe. This is followed by a discussion of fly ash-reinforced composites, such as elastomer-based composites and metal matrix composites. This book also covers a wide range of applications of fly ash in cement, concrete, bricks and blocks, road construction, wastewater treatment, and scrubber sludge solidification. - Highlights the recent developments in the utilization of fly ash including its preparation, functionalization, properties, and handling. - Places a focus on a wide variety of fly ash applications including recent innovations, such as alkali-activated binder, polypropylene composite, and geopolymer concrete. - Includes comprehensive coverage of the characteristics of fly ash with a particular focus on health hazards if it is not properly disposed. - Discusses fly ash-reinforced composites, such as polymer/elastomer-based composites and metal matrix composites.
Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies
Download or read book Lead free Electronics written by Sanka Ganesan and published by John Wiley & Sons. This book was released on 2006-03-31 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lead-free Electronics provides guidance on the design and use of lead-free electronics as well as technical and legislative perspectives. All the complex challenges confronting the elec-tronics industry are skillfully addressed: * Complying with state legislation * Implementing the transition to lead-free electronics, including anticipating associated costs and potential supply chain issues * Understanding intellectual property issues in lead-free alloys and their applications, including licensing and infringement * Implementing cost effective manufacturing and testing * Reducing risks due to tin whiskers * Finding lead-free solutions in harsh environments such as in the automotive and telecommunications industries * Understanding the capabilities and limitations of conductive adhesives in lead-free interconnects * Devising solutions for lead-free, flip-chip interconnects in high-performance integrated circuit products Each chapter is written by leading experts in the field and carefully edited to ensure a consistent approach. Readers will find all the latest information, including the most recent data on cyclic thermomechanical deformation properties of lead-free SnAgCu alloys and a comparison of the properties of standard Sn-Pb versus lead-free alloys, using the energy partitioning approach. With legislative and market pressure to eliminate the use of lead in electronics manufacturing, this timely publication is essential reading for all engineers and professionals in the electronics industry.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
