Download or read book Effects of Fluid Dynamics on Cleaning Efficacy of Supercritical Fluids written by and published by . This book was released on 1993 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pacific Northwest Laboratory (PNL) and Boeing Aerospace Company are developing a process to clean metal parts using a supercritical solvent. This work is part of an effort to address issues inhibiting the rapid commercialization of Supercritical Fluid Parts Cleaning (SFPC). PNL assembled a SFPC test stand to observe the relationship between the fluid dynamics of the system and the mass transfer of a contaminant from the surface of a contaminated metal coupon into the bulk fluid. The bench-scale test stand consists of a Berty'' autoclave modified for these tests and supporting hardware to achieve supercritical fluids parts cleaning. Three separate sets of tests were conducted using supercritical carbon dioxide. For the first two tests, a single stainless steel coupon was cleaned with organic solvents to remove surface residue, doped with a single contaminant, and then cleaned in the SFPC test stand. Contaminants studied were Dow Corning 200 fluid (dimethylpolysiloxane) and Castle/Sybron X-448 High-temperature Oil (a polybutane/mineral oil mixture). A set of 5-minute cleaning runs was conducted for each dopant at various autoclave impeller speeds. Test results from the first two sets of experiments indicate that precision cleaning for difficult-to-remove contaminants can be dramatically improved by introducing and increasing turbulence within the system. Metal coupons that had been previously doped with aircraft oil were used in a third set of tests. The coupons were placed in the SFPC test stand and subjected to different temperatures, pressures, and run times at a constant impeller speed. The cleanliness of each part was measured by Optically Stimulated Electron Emission. The third set of tests show that levels of cleanliness attained with supercritical carbon dioxide compare favorably with solvent and aqueous cleaning levels.
Download or read book Fluid Dynamic Effects on Precision Cleaning with Supercritical Fluids written by and published by . This book was released on 1994 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pacific Northwest Laboratory staff have assembled a small supercritical fluids parts cleaning test stand to characterize how system dynamics affect the efficacy of precision cleaning with supercritical carbon dioxide. A soiled stainless steel coupon, loaded into a ''Berty'' autoclave, was used to investigate how changes in system turbulence and solvent temperature influenced the removal of test dopants. A pulsed laser beam through a fiber optic was used to investigate real-time contaminant removal. Test data show that cleaning efficiency is a function of system agitation, solvent density, and temperature. These data also show that high levels of cleaning efficiency can generally be achieved with high levels of system agitation at relatively low solvent densities and temperatures. Agitation levels, temperatures, and densities needed for optimal cleaning are largely contaminant dependent. Using proper system conditions, the levels of cleanliness achieved with supercritical carbon dioxide compare favorably with conventional precision cleaning methods. Additional research is currently being conducted to generalize the relationship between cleaning performance and parameters such as contaminant solubilities, mass transfer rates, and solvent agitation. These correlations can be used to optimize cleaning performance, system design, and time and energy consumption for particular parts cleaning applications.
Download or read book Supercritical Fluid Cleaning written by Samuel P. Sawan and published by Elsevier. This book was released on 1998-12-31 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although supercritial fluid (SCF) technology is now widely used in extraction and purification processes (in the petrochemical, food and pharmaceuticals industries), this book is the first to address the new application of cleaning. The objective is to provide a roadmap for readers who want to know whether SCF technology can meet their own processing and cleaning needs. It is particularly helpful to those striving to balance the requirements for a clean product and a clean environment. The interdisciplinary subject matter will appeal to scientists and engineers in all specialties ranging from materials and polymer sciences to chemistry and physics. It is also useful to those developing new processes for other applications, and references given at the end of each chapter provide links to the wider body of SCF literature. The book is organized with topics progressing from the fundamental nature of the supercritical state, through process conditions and materials interactions, to economic considerations. Practical examples are included to show how the technology has been successfully applied. The first four chapters consider principles governing SCF processing, detailing issues such as solubility, design for cleanability, and the dynamics of particle removal. The next three chapters discuss surfactants and microemulsions, SCF interaction with polymers, and the use of supercritical carbon dioxide (CO2) as a cleaning solvent. The closing chapters focus on more practical considerations such as scaleup, equipment costs, and financial analysis.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1994-10 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Research on Advancements in Supercritical Fluids Applications for Sustainable Energy Systems written by Chen, Lin and published by IGI Global. This book was released on 2020-08-28 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are increasingly being used in energy conversion and fluid dynamics studies for energy-related systems and applications. These new applications are contributing to both the increase of energy efficiency as well as greenhouse gas reduction. Such research is critical for scientific advancement and industrial innovations that can support environmentally friendly strategies for sustainable energy systems. The Handbook of Research on Advancements in Supercritical Fluids Applications for Sustainable Energy Systems is a comprehensive two-volume reference that covers the most recent and challenging issues and outlooks for the applications and innovations of supercritical fluids. The book first converts basic thermo-dynamic behaviors and “abnormal” properties from a thermophysical aspect, then basic heat transfer and flow properties, recent new findings of its physical aspect and indications, chemical engineering properties, micro-nano-scale phenomena, and transient behaviors in fast and critical environments. It is ideal for engineers, energy companies, environmentalists, researchers, academicians, and students studying supercritical fluids and their applications for creating sustainable energy systems.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Supercritical Fluids written by E. Kiran and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are neither gas nor liquid, but can be compressed gradually from low to high density and they are therefore interesting and important as tunable solvents and reaction media in the chemical process industry. By adjusting the density the properties of these fluids can be customised and manipulated for a given process - physical or chemical transformation. Separation and processing using supercritical solvents such as CO2 are currently on-line commercially in the food, essential oils and polymer industries. Many agencies and industries are considering the use of supercritical water for waste remediation. Supercritical fluid chromatography represents another, major analytical application. Significant advances have recently been made in materials processing, ranging from particle formation to the creation of porous materials. The chapters in this book provide tutorial accounts of topical areas centred around: (1) phase equilibria, thermodynamics and equations of state; (2) critical behaviour, crossover effects; (3) transport and interfacial properties; (4) molecular modelling, computer simulation; (5) reactions, spectroscopy; (6) phase separation kinetics; (7) extractions; (8) applications to polymers, pharmaceuticals, natural materials and chromatography; (9) process scale-up.
Download or read book Supercritical Fluids Cleaning written by and published by . This book was released on 1991 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper discusses a proposed multi-party research and development program which seeks to develop supercritical fluid cleaning technology as an alternative to existing solvent cleaning applications. While SCF extraction technology has been in commercial use for several years, the use of these fluids as cleaning agents poses several new technical challenges. Problems inherent in the commercialization of SCF technology include: the cleaning efficacy and compatibility of supercritical working fluids with the parts to be cleaned must be assessed for a variety of materials and components; process parameters and equipment design Have been optimized for extractive applications and must be reconsidered for application to cleaning; and co-solvents and entrainers must be identified to facilitate the removal of polar inorganic and organic contaminants, which are often not well solvated in supercritical systems. The proposed research and development program would address these issues and lead to the development and commercialization of viable SCF-based technology for precision cleaning applications. This paper provides the technical background, program scope, and delineates the responsibilities of each principal participant in the program.
Download or read book Advanced Applications of Supercritical Fluids in Energy Systems written by Chen, Lin and published by IGI Global. This book was released on 2017-03-24 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids have been utilized for numerous scientific advancements and industrial innovations. As the concern for environmental sustainability grows, these fluids have been increasingly used for energy efficiency purposes. Advanced Applications of Supercritical Fluids in Energy Systems is a pivotal reference source for the latest academic material on the integration of supercritical fluids into contemporary energy-related applications. Highlighting innovative discussions on topics such as renewable energy, fluid dynamics, and heat and mass transfer, this book is ideally designed for researchers, academics, professionals, graduate students, and practitioners interested in the latest trends in energy conversion.
Download or read book An Economy Based on Carbon Dioxide and Water written by Michele Aresta and published by Springer. This book was released on 2019-07-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to CO2 capture and utilization (CCU) from a green, biotechnological and economic perspective, and presents the potential of, and the bottlenecks and breakthroughs in converting a stable molecule such as CO2 into specialty chemicals and materials or energy-rich compounds. The use of renewable energy (solar, wind, geothermal, hydro) and non-fossil hydrogen is a must for converting large volumes of CO2 into energy products, and as such, the authors explore and compare the availability of hydrogen from water using these sources with that using oil or methane. Divided into 13 chapters, the book offers an analysis of the conditions under which CO2 utilization is possible, and discusses CO2 capture from concentrated sources and the atmosphere. It also analyzes the technological (non-chemical) uses of CO2, carbonation of basic minerals and industrial sludge, and the microbial-catalytic-electrochemical-photoelectrochemical-plasma conversion of CO2 into chemicals and energy products. Further, the book provides examples of advanced bioelectrochemical syntheses and RuBisCO engineering, as well as a techno-energetic and economic analysis of CCU. Written by leading international experts, this book offers a unique perspective on the potential of the various technologies discussed, and a vision for a sustainable future. Intended for graduates with a good understanding of chemistry, catalysis, biotechnology, electrochemistry and photochemistry, it particularly appeals to researchers (in academia and industry) and university teachers.
Download or read book Supercritical Fluid Methods and Protocols written by John R. Williams and published by Springer Science & Business Media. This book was released on 2008-02-05 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last 15 years, there has been renewed interest in supercritical fluids owing to their unique properties and relatively low environmental impact. Greatest attention has been given to the extraction and separation of organic compounds. Supercritical fluids have also been successfully used for particle production, as reaction media, and for the destruction of toxic waste. Supercritical carbon dioxide has been the most widely used supercritical fluid, mainly because it is cheap, relatively nontoxic, and has convenient critical values. Supercritical fluids have also been used on analytical and preparative scales for many biological and other applications. Many papers have been published on the use of supercritical fluids. However, few have acted as a detailed instruction manual for those wanting to use the techniques for the first time. We anticipate that this Methods in Biotechnology volume, Supercritical Fluid Methods and Protocols will s- isfy the need for such a book. Every chapter has been written by experienced workers and should, if closely followed, enable workers with some or no previous experience of supercritical fluids to conduct experiments successfully at the first attempt.
Download or read book Supercritical Fluid Technology for Energy and Environmental Applications written by Vladimir Anikeev and published by Newnes. This book was released on 2013-12-21 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical Fluid Technology for Energy and Environmental Applications covers the fundamental principles involved in the preparation and characterization of supercritical fluids (SCFs) used in the energy production and other environmental applications. Energy production from diversified resources — including renewable materials — using clean processes can be accomplished using technologies like SCFs. This book is focused on critical issues scientists and engineers face in applying SCFs to energy production and environmental protection, the innovative solutions they have found, and the challenges they need to overcome. The book also covers the basics of sub- and supercritical fluids, like the thermodynamics of phase and chemical equilibria, mathematical modeling, and process calculations.A supercritical fluid is any substance at a temperature and pressure above its critical point where distinct liquid and gas phases do not exist. At this state the compound demonstrates unique properties, which can be "fine-tuned," making them suitable as organic solvents in a range of industrial and laboratory processes.This volume enables readers to select the most appropriate medium for a specific situation. It helps instructors prepare course material for graduate and postgraduate courses in the area of chemistry, chemical engineering, and environmental engineering. And it helps professional engineers learn supercritical fluid-based technologies and use them in solving the increasingly challenging environmental issues. - Relates theory, chemical characteristics, and properties of the particular supercritical fluid to its various applications - Covers the fundamentals of supercritical fluids, like thermodynamics of phase and chemical equilibria, mathematical modeling, and process calculations - Includes the most recent applications of supercritical fluids, including energy generation, materials synthesis, and environmental protection
Download or read book Supercritical Fluids written by T. Sako and published by Springer Science & Business Media. This book was released on 2002 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: The potential of supercritical fluid methods is presented in a comprehensive way. On the basis of a careful discussion of physical and chemical principles, the application of this method in process technology is demonstrated.
Download or read book Guide to industrial assessments for pollution prevention and energy efficiency written by and published by DIANE Publishing. This book was released on with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Supercritical Fluids written by Richard Smith and published by Elsevier Inc. Chapters. This book was released on 2013-12-08 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Supercritical Fluids written by Richard Smith and published by Elsevier Inc. Chapters. This book was released on 2013-12-08 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt:
